New G40 with a lot of problems.
Just acquired this notebook a few weeks ago and I'm having a lot of issues (not sure if they're hardware of software problems) :
- When I press the power button in order to make the computer start, it automatically shuts down again when it's on the dark screen with "Lenovo" written, then I have to press it again to start;
- My cursor is always with the "loading ball" on it;
- HD use on Task Manager is most of times between 80% and 99%. CPU and RAM also have high use sometimes, the Host Service process sometimes uses about 1700 Mb of RAM. The solution center show alerts about memory too;
- Heat on the left side;
- System is slow;
- Energy Manager doesn't start;
Hi HenriqueMK,
Welcome to the Forums
As per the query we understood that you are facing multiple issues with your Lenovo G40 laptop.
As you have mentioned that the system is slow try to boot the system to safe mode and check if the system is slow in safe mode.
Try to remove the dust in the fan through energy management, go to energy management and select maintainence guide and select run under fan dust removal and check for the issue.
Close the background running applications.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Adding a new class with Creator (really simple problem i think..)
I added a new class to my project with creator...
class name is "CambiaNote" and there's a method called Cambia
tabellaselezionabile is my project(package)
I tried to run everything but It gave me an error:
Exception Details: org.apache.jasper.JasperException
Error getting property 'cambia' from bean of type tabellaselezionabile.Page1I don't know, but the word cambia don't exists at all in my code... or it is not case sensitive..?
please help, thankstypo: correct Paint() to paint()
-
New MacBook with built in iSight problem
Green light is on but when I go to photo booth or iChat the screen is black?
I can't take pics or video:(Welcome to Apple Discussions, klassikgirl
Having tried all the suggestions on the boards, I think you should take it back to the retailer and exchange it for one that works. The problem cannot get better with time, and a same day exchange for a non-functional Mac should be no problem.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight -
Schedule with dependent lot size problem
Hi,
I maintain the setup/process/tear down time(base qty is 10) in Work Schedule view in MM02(dependent with lot size)..But the begin date/end date in these POs are the same when I create Production Orders with different qty.
It seems my setting doesn't take effect..Do you have any suggestion?
PO 1: 100 qty Start date 11/10 End DAte 11/11
PO 2: 1 Qty Start date 11/10 End DAte 11/11
PO 3:1000000 Qty Start date 11/10 End DAte 11/11
Why the start/end date doesn't change based on my PO qty?thanks..Hi,
Monst Yang wrote:
> I maintain the setup/process/tear down time(base qty is 10) in Work Schedule view in MM02(dependent with lot size)..But the begin date/end date in these POs are the same when I create Production Orders with different qty.
In-house production time (lot size dependent or independent) is used for calculating the basic dates of planned orders when MRP is run with basic dates parameter (instead of lead time scheduling). However when production orders are created basic dates are always determined according to the production dates and production dates are determined by lead time scheduling. In other words, the lot size dependent production time data that you have maintained could only determine basic dates of planned orders, only if MRP is run with that parameter. In the case of your production orders, standart values of the operations and formulas of the work centers are used by lead time scheduling. Dates might be equal because scheduling formulas of work centers does not consider order quantities or labour hours, which would be multiplied by order quantities, are not maintained in routings. Investgate the production dates and scheduling of the operations in production orders. Also have MRP create planned orders to see the effects of lot size dependent times in master data. Be sure to emty the lot size independent production time in material master to avoid it overwriting lot size dependent time.
Regards.
Edited by: Özgen Canan on Nov 10, 2011 3:58 PM -
Lots of problems with newer MacBook Pro
I bought my first Mac about a year and a half ago. Unfortunately I've had lots of problems with it. I need to get it repaired, but I'm not sure what's wrong. I live in Thailand so I want to have some idea of what's going on before taking it to a shop (so they don't try to price gouge me).
The first problem happened about 9 months after i bought it. The computer would become incredibly slow. Sometimes it would take 15 minutes to boot up and sometimes it wouldn't boot up at all. But sometimes it was fine. If it did boot up, sometimes when I'd go into a folder in Finder, nothing would show up. The spinning loader graphic would just spin at the bottom of the Finder window. I ran a disk check and it said it found multiple errors that could not be fixed. I erased the hard drive and reinstalled Lion and everything seemed fine. Since I live in Thailand and I need my computer for work, I didn't want to ship it off to Apple to be fixed. It seemed fine after formatting the hard drive, so I figured it was fixed.
About 3 months later the problem came back, but much worse. I couldn't boot up or anything. I took it to a small Mac repair shop because at this point the 1 year warranty had expired. Of course inside the shop it booted up fine and I had to explain to the guy that for 5 days I haven't even been able to turn it on. Finally after restarting 4 times it began slowing down and he could see what I was experiencing. He said he could try replacing the hard drive, but couldn't guarantee it would fix it. I needed my computer badly at this point so I said let's try. I came back a couple days later and he had transferred everything to the new hard drive and installed it. Everything seemed to be working fine.
That worked, although sometimes (rarely) something weird would happen, like the computer would just shut down for no reason. But, the DVD drive stopped working. It loads a disc OK, but it can't read it and won't burn a DVD. One time it wouldn't eject my DVD for about 30 minutes. I was trying everything I could find on Google. Finally it spit it out.
Now, about 6 months later, I was watching a movie and about 10 small colored boxes popped up on the screen. They went away after a few seconds, so I closed my movie and went to shut down my computer. The entire screen then filled with horizontal rainbow colored static. It stayed for about 30 seconds, then the screen turned grey. I could hear and feel the fans blowing at full speed.
And then for about a full day it went away, until earlier today. As I was backing up all my files I played a quick part of a movie. The same squares popped up on the screen so I immediately closed the movie and they went away.
I finished backing up and then erased the hard disk. I started installing Mountain Lion, and it stopped at about 75%. I canceled the installer and restarted. After a few seconds the screen turned solid blue with white staticky lines. And now that happens every time I turn on the computer after about 30 seconds. There's no operating system because before I can even get to the installer before the screen goes.
Sorry for the huge amount of info. I just don't have enough experience with Macs to know what's going on. My current issue resembles a video card problem, the issues before resemble a hard drive and DVD drive issue. Replacing the hard drive fixed it temporarily. Could a problem with the logic board cause all of these issues?
Thanks for any help with this.A few things to note...
If you had contacted Apple about each of the issues that you reported here, they would have kept a log of the problems that would help them determine whether to continue support after the warranty expires.
You might consider asking about "Flat Rate Repair Pricing." See the discussion thread here and note that some users report that the flat rate repair pricing is only available in the U.S. and Japan.
gavin310 wrote:
(typically they just ship your computer to Singapore instead of working on it "in-house" from what I read).
Actually, I had great experiences with two different macs sent to the repair depot. One computer had narcolepsy on day one. Apple sent me a box, I packed up the PB and dropped it off at UPS. Apple fixed and returned to my house two days later. The second MBP had a known video card problem. I took it to an Apple Store Genius who ran a specifc test and deduct that it was the known defective video card. The store was out of parts and ordering would take a week. Knowing my past experience with the Repair Depot, I ask for that option. The genius took my MBP and shipped it to the depot that night. Three days later, I received the fixed MBP and on the work order, their tests showed failed fans that they also replaced. Three or four weeks later, the Apple Store called to tell me they got the video card in stock.
Gather up your grit, perseverance, and persistence before contacting Apple. Try bypassing phone support by contacting them via their online support system with the link I provided in the previous post. (I remember using the online support system and was able to choose to have them call me. At the time, I had AppleCare so i'm not certain with out-of-warranty.) Another option is to seek an authorized Apple service provider.
Good Luck! -
My experience with new HP ENVY 17-j113el : 1200 euros spent to buy a lot of problems...
Good morning,
In April 2014 I have bought a nice, full-loaded, expensive (1200 euro) portable PC, HP ENVY 17-j113el.
Before I was using a smaller, cheaper HP G62 notebook: never have had any problem in three years, great prodct for the price.
With nice and new machine my nightmare started: wifi does not works form the first day, thanks to Ralink 3290 card. Low signals, intermitent functioning, disconnections. Requeste a replacement card to HP support, received after almost a month.
Replaced the card with the "new" Ralink 3290, and wifi signal started to be at normal level. After a short use, the signals started again to be intermittenly much lowest than the normal. Better than my original wifi card, but not as good as the signals received with my previous HP G62. Still having lowwifi signals, "floating" levels", and having the PC at 2 meters from the router shows up just a poor "-65" on inSSIDer.. And no, it is not a problem of my wifi router: never had any problems before with ANY device device.
In addition, since I have installed the new Ralink 3290 card and using wifi on this pc, another problem came out: somethimes there is a strong "click" form the audio speakers on the bottom, even if not playing any music or audio.
That is really annoying.
Other issues: after bios upgrade to 56 (recommended by HP, executed as HP Support Assistant software directed) I have experienced sporadic computer shut off immediately ater power up.
You push the power button, the computer starts, and after 2 or 3 seconds the computer shut down.
You have to push power button again to restart.
Additional minor issues (still not espected from a 1200 euro notebook): mousepad left key, even if clicking, does not recognize the "click". You have to push strong to make it work.
And also, the keyboard: poor, poor, poor keys feeling, and on left side it bend miserably when used.
Just to note: I am a 43 years old professional, I work as electronics and IT tecnician since more than 20 years, and I am not one of those who complains for nothing.
BUT, after buying HP for years with good satisfaction, this time I am realy disappointed with the lack of quality.
Came on HP, people does not spend 1200 euros to have a PC with this kinds of problems: bring a solution!
I espect from HP to fix all this issues with my "new" (sigh!) nice, wonderful looking, full loaded and expensive PC.
V/R,
Riccardo G.Hello Rightrik,
Thanks for posting on the HP Forums.
It seems the computer is facing a number of issues, most which are likely relating to hardware. In my opinion, since the computer it still relatively new, I would contact HP phone support. Your computer would either be serviced or replaced, and the issues will be resolved.
You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP. -
I ended up letting my itunes match subscription go because I was having a lot of problems with it. I was getting a lot of music where it would play the censored version instead of explicit like I have. After attempting numerous times to fix I gave up and let match expire. I had updated my library by downloading a number of AAC versions from itunes and then manually deleted all of them and added the proper files back by re-ripping my CD's again. I also added a bunch of new music and because I use a rating system, re organized all my music and rated some stuff with new ratings and higher star ratings.
About 3 months passed and I decided to give match another try. After getting it, I found it odd that my database was put there in virtually no time. Not only that, a significant amount of music I deleted (but was in the old match subscription) showed up. I knew it was broken at that point, but today, I was listening to music and items which I know have been updated and changed, have also reverted back to old settings. Is there a way to fix this?
Also, I'm REALLY annoyed with match again. After all my work, I STILL have censored music as my match music. It is really annoying to have different music on my computer than what is in the cloud (not to mention the music which will not upload to the cloud and just constantly says "waiting"!!)Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one. -
Guys,
I really am having a lot of problems with a program. I got the program to compile but it looks absolutely nothing like it is supposed to look. I have a deadline for tomorrow and sent my teacher an email but the chances of him getting back to me by tomorrow night for a weekend is pretty much slim to none. Anyways I am sending my output and if anyone could give me advice or feedback on why it does not look right if it is something small and if its alot of things go ahead and call me dumb.
here is my code:
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
private Panel topPanel;
private TextArea topDisplay[];
private Panel bottomPanel;
private TextField startField = new TextField(10);
private TextField stopField = new TextField(10);
private TextField stepField = new TextField(10);
private Label startLabel = new Label ("Start");
private Label stopLabel = new Label ("Stop");
private Label stepLabel = new Label ("Step");
private Button goButton;
private Button clearButton;
private boolean clearText;
private boolean first;
private int start;
private int stop;
private int step;
//constructor methods
public Checkerboard()
//construct components and initialize beginning values
topPanel = new Panel();
topDisplay = new TextArea[16];
goButton = new Button("Go");
clearButton = new Button("Clear");
first = true;
bottomPanel = new Panel();
int start = 0;
int stop = 0;
int step = 0;
bottomPanel.add(startField);
bottomPanel.add(stopField);
bottomPanel.add(stepField);
bottomPanel.add(startLabel);
bottomPanel.add(stopLabel);
bottomPanel.add(stepLabel);
bottomPanel.add(goButton);
goButton.addActionListener(this);
bottomPanel.add(clearButton);
clearButton.addActionListener(this);
clearText = true;
//set layouts for the Frame and Panels
setLayout(new BorderLayout());
topPanel.setLayout(new GridLayout(4, 4, 10, 10));
bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
//construct the Display
for(int i = 1; i <= 15; i++)
topDisplay[i] = new TextArea(null, 3, 5, 3);
//set color to the panel
//row 1
for(int x = 1; x <= 4; x++)
//set color for
setBackground(Color.white);
//row 2
for(int x = 5; x <= 8; x++)
//set color for
setBackground(Color.white);
//row 3
for(int x = 9; x <= 12; x++)
//set color for
setBackground(Color.white);
//row 4
for(int x = 13; x <= 16; x++)
//set color for
setBackground(Color.white);
//add components to frame
add(topPanel, BorderLayout.NORTH);
add(bottomPanel, BorderLayout.CENTER);
//allow the x to close the application
addWindowListener(new WindowAdapter()
public void windowclosing(WindowEvent e)
System.exit(0);
} //end window adapter
public static void main(String args[])
Checkerboard f = new Checkerboard();
f.setTitle("Checkerboard Array");
f.setBounds(50, 100, 300, 400);
f.setLocationRelativeTo(null);
f.setVisible(true);
} //end main
public void actionPerformed(ActionEvent e)
//convert data in TextField to int
int start = Integer.parseInt(startField.getText());
int stop = Integer.parseInt(stopField.getText());
int step = Integer.parseInt(stepField.getText());
for(int i = 1; i <=16; i++)
setBackground(Color.blue);
for(int i = start; i <= stop; i++)
setBackground(Color.yellow);
//test clear
String arg = e.getActionCommand();
//clear button was clicked
if(arg.equals("Clear"))
clearText = true;
start = 0;
stop = 0;
step = 0;
first = true;
setBackground(Color.white);
startField.requestFocus();
} //end the if clear
}//end action listener
}//end classThis will incorporate arrays, for loops, and Frames all in one.
Create a panel containing an array of 16 TextArea components that change color to correspond with the start, stop, and step values entered by the user. Perform the following tasks to create the Checkerboard Array application shown below. When the user enters the start, stop, and step fields and then clicks the Go button, the results are also shown below.
1. Call your application Checkerboard.java
2. You will need the following variables� declare them as private:
a. 16 component TextArea array
b. a Panel to hold the array
c. 3 TextField components with length of 10
d. 3 int variables to receive the start, stop, and step values
e. 3 Labels to display the words Start, Stop, and Step
f. a Go button
g. a Clear button
h. a Panel to hold the 3 TextFields, 3 Labels, and the 2 Buttons
3. Create a constructor method to:
a. construct each of the components declared above and initializes the start, stop, and step variables to zero (when constructing the TextArea components, use the following parameters: null, 3, 5, 3)
b. set the Frame layout to BorderLayout
c. write a for loop to loop the array and set each of the 16 TextArea components in that array so they cannot be edited. In the same loop, set each of the TextArea components text to be 1 more than the index number. Also in this same loop, set the background of each of the TextArea components to white.
d. set the Panel for the TextArea components to GridLayout with 4 rows, 4 columns, and both gaps set to 10
e. set the Panel for the TextFields, Labels, and button to GridLayout with 3 rows, 3 columns, and both gaps set to 5
f. add the components to their respective Panels
g. make the buttons clickable
h. place the Panels in the Frame� put one in the NORTH and one in the CENTER
i. Enter the addWindowListener() method described in the chapter� this is the method that overrides the click of the X so it terminates the application
4. In your actionPerformed() method:
a. convert the data in your TextFields to int and store them in the variables declared above
b. write a loop that goes through the array setting every background color to blue
c. write another loop that�s based on the user inputs. Each time the loop is executed, change the background color to yellow (so� start your loop at the user�s specified starting condition. You�ll stop at the user�s specified stopping value. You�ll change the fields to yellow every time you increment your loop based on the step value. REMEMBER: Your displayed values are 1 off from your index numbers!!)
5. Write a main() method that creates an instance of the Checkerboard Frame.
a. set the bounds for the frame to 50, 100, 300, 400
b. set the title bar caption to Checkerboard Array
c. use the setVisible() method to display the application Frame during execution
6. After you get all of this complete, include error handling to make sure:
a. the values entered in the TextFields are valid integers
b. the start value is greater than or equal to 1 and less than or equal to 16
c. the stop value is greater than or equal to 1 and less than or equal to 16
d. the step value is greater than or equal to 1 and less than or equal to 16
e. the start condition is less than the stop condition
f. when an error occurs, give an error message in a dialog box that is specific to their error, remove the text from the invalid field, and put the cursor in that field so the user has a chance to re-enter� this can be accomplished by using multiple try/catch statements
g. only change the colors if the numbers are valid
7. Create a clear button as seen in the example below. This button should:
a. clear out all 3 TextFields
b. change the background color of all TextArea array elements to white
c. put the cursor in the start field
8. Document!!
I know you guys are probably busy with your own stuff but any help and I would certainly appreciate itgot the yellow boxes to come up but just one box.....so is there something wrong with my yellow set background because I am not seeing any more errors
//packages to import
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
private Panel topPanel;
private TextArea topDisplay[];
private Panel bottomPanel;
private TextField startField = new TextField(10);
private TextField stopField = new TextField(10);
private TextField stepField = new TextField(10);
private Label startLabel = new Label ("Start");
private Label stopLabel = new Label ("Stop");
private Label stepLabel = new Label ("Step");
private Button goButton;
private Button clearButton;
private boolean clearText;
private boolean first;
private int start;
private int stop;
private int step;
//constructor methods
public Checkerboard()
//construct components and initialize beginning values
topPanel = new Panel();
topDisplay = new TextArea[16];
goButton = new Button("Go");
clearButton = new Button("Clear");
first = true;
bottomPanel = new Panel();
int start = 0;
int stop = 0;
int step = 0;
bottomPanel.add(startField);
bottomPanel.add(stopField);
bottomPanel.add(stepField);
bottomPanel.add(startLabel);
bottomPanel.add(stopLabel);
bottomPanel.add(stepLabel);
bottomPanel.add(goButton);
goButton.addActionListener(this);
bottomPanel.add(clearButton);
clearButton.addActionListener(this);
clearText = true;
//set layouts for the Frame and Panels
setLayout(new BorderLayout());
topPanel.setLayout(new GridLayout(4, 4, 10, 10));
bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
//construct the Display
for(int i = 0; i <= 15; i++)
topDisplay[i] = new TextArea(null, 3, 5, 3);
topDisplay.setText(String.valueOf(i+1));
topDisplay[i].setEditable(false);
topPanel.add(topDisplay[i]);
//add components to frame
add(topPanel, BorderLayout.NORTH);
add(bottomPanel, BorderLayout.CENTER);
//allow the x to close the application
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
} //end window adapter
public static void main(String args[])
Checkerboard f = new Checkerboard();
f.setTitle("Checkerboard Array");
f.setBounds(50, 100, 300, 400);
f.setLocationRelativeTo(null);
f.setVisible(true);
} //end main
public void actionPerformed(ActionEvent e)
boolean done = false;
//test go
String arg = e.getActionCommand();
//go button was clicked
if(arg.equals("Go"))
//convert data in TextField to int
int start = Integer.parseInt(startField.getText());
int stop = Integer.parseInt(stopField.getText());
int step = Integer.parseInt(stepField.getText());
while(!done)
try
if((start <= 1) && (start > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter start between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
startField.setText(" ");
startField.requestFocus();
} //end catch
try
if ((stop < 1) && (stop > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter stop between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
stopField.setText(" ");
stopField.requestFocus();
} //end catch
try
if ((step < 1) && (step > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter step between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
stepField.setText(" ");
stepField.requestFocus();
} //end catch
try
if (start > stop) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "Stop cannot be larger than start", "Error", JOptionPane.ERROR_MESSAGE);
startField.setText(" ");
stopField.setText(" ");
stepField.setText(" ");
startField.requestFocus();
} //end catch
} //end while
for(int i = 0; i <=15; i++)
topDisplay[i].setBackground(Color.blue);
for(int i = start; i <= stop; step++)
topDisplay[i].setBackground(Color.yellow);
} //end the if go
//clear button was clicked
if(arg.equals("Clear"))
clearText = true;
startField.setText("");
stopField.setText("");
stepField.setText("");
first = true;
setBackground(Color.white);
startField.requestFocus();
} //end the if clear
}//end action listener
}//end class -
Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?
When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work. -
A lot of problems with Oracle BI SEE 11g
I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44 -
A lot of problems with Lion Server in Mac Mini Server
I have a new Mac Mini Server and I have a lot of problems.
The server application works well for a day, then start to have problem, for example: I can not change the configuration of the share folder, I add a new user but he can not see some folders.
Then if I login the Mac Mini with another user, he can not see the starting folder and if you open a new folder you see a lot of strange documents.
Later, with administrator user, I can not login the server application, I put the user name and password but it refuses it (user name and passowrd are correct)
In the end I also can not login the computer.
I reinstalled the Lion Server 2 times but nothing change, after 2 days it doesn't work like before.
I'm very upset, this is the first time in more then 20 year I have a problem with an Apple computer.
What can I do?
Please help me
ThanksTurribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44 -
Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
my iphone3 its ben havin g a lot of problems it will not lock i open a game and
it will go to ipod im going to get a new one but i would like to know what is rong with itYeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one. -
A lot of problems with my iPod(songs delet/stop at will)
I started my i pd up this morning and none of my podcast or music would play. After a while I just let my ipod sit and turned it on but it stopped after pleying about a minute. I reset the iPod and now everything is deleted. i am getting so fed up with this thing. I've had to reformat and reset it like twice in the last 3 weeks.
Can Anyone help?Jaredk wrote:
I am having a lot of problems with my Bionic and it is making me very dissastified.
1. My 3G and 4G service is going out.
2. My phone reboots randomly.
3. It gets very hot with little to no use.
4. Sound doesn't work sometimes.
5. Battery life is utter garbage.
6. The camera is horrible.
I've called up already and did a soft and hard reset. I am unable to send it in for repairs and they couldn't fix it at the store. I am very upset and either want a fix or I want to be able to trade it in for a new phone.
Hi Jaredk
3 and 5 are related, 1 and 2 may be part of that as well. The camera has terrible lag and all in all isn't that impressive but that's being addressed. I haven't had or heard any issues with the sound cutting out.
Have you tried going to Settings > Wireless & networks > Mobile networks > Network Mode and select CDMA Only to see if that fixes any of the issues you're seeing? Specifically the reboots and heat.
For the reboots I would recommend un-installing most of your apps and then slowly add them back until you notice the reboots start up. -
Facing lot of problems with the DATA object -- Urgent
Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S
Maybe you are looking for
-
Hello, we distribute a kiosk-system based upon webdynpro for Abap. We have made out own big buttons for the application so it´s easy to use with the fingers on a touch-screen. If the user wants to see his payslip, it is show as PDF in a InteractiveFo
-
I have couple of jsf pages in adfc-config. Also, I have a bounded task flow. I want to invoke this bounded tf after users entered data in those unbounded tf pages. Thank you.
-
Dv5234us windows 7 ultimate 32-bit
I am looking to see if there is a possible sound driver for windows 7 32-bit on hp dv5234us?
-
How do I move my library to an external drive and delete the original on my local hd
i have final cut x and yosemite. im running out of space on my hard drive on my mac book pro. i would like to copy all my old libraries to an external storage space and then delete the library from my local hard drive. im nervous to do it incase i lo
-
Reset button does not reset field color.
Can't find the solution. I have scripts that highlight the field background color if the value is out of range. Also, resets the color back if the range is OK. This works just fine. When I reset the form (with button), the field values reset OK, bu