New G5 Quad running slow in general

My computer is very new...and it has been running slowly (the rainbow circle appears quite often) from day 1. It's not specific to any one program, and it happens when I am searching the web too. I bought and installed Disk Warrior, but I don't really understand the program. Why would such a kick-butt, new computer run slow?
Advice appreciated

You might want to post this in the Using your Power Mac G5 section, which is
the right section for your computer.
In the menatime, how have you used Disk Warrior ? How
long have you been using your computer ? Do you have
a lot of important files on it ?
There are things you might want to try before taking
measures such as running DW. Yasu is a nice and easy-to-use
maintenance/troubleshooting utility which will clear
cache files and font caches that might have become
corrupted and could slow the computer down, as well
as clearing logs, etc.
thanks.

Similar Messages

  • New G5 Quad running slow...why?

    My computer is very new...and it has been running slowly (the rainbow circle appears quite often) from day 1. It's not specific to any one program, and it happens when I am searching the web too. I bought and installed Disk Warrior, but I don't really understand the program. Why would such a kick-butt, new computer run slow?
    Advice appreciated

    danabell,
    Apple sells a sort of bare bones computer and it takes a bit more money and knowledge to leverage it's full capabilites.
    Disk Warrior will not give you much of any performance benefit, in fact at your current learning curve I don't recommend you using it or much of anything else.
    What you need is someone who a Mac mechanic, that can trick out your Quad with more RAM, faster hard drives etc., much like a car mechanic. They can also take a look how and what your using that Quad for and best tailor a backup and software utilization method so your getting the most out of that beast and protecting your data from loss.
    You have a Quad processor machine, it's potentially very powerful provided the other requirements of the computer are met. Especially more RAM, then faster video cards and hard drives.
    Only someone who can observe what your using this for can tailor your machine, that's why Apple sells a bare box at the Apple Stores, because so many people's needs are different that tricking out each machine would set the average price well over $5000.
    Now you can take the machine back to a Apple Store and they can install RAM for you, but they charge so much it's insane. You'll do better having someone install it for you and buy it off a website like Crucial.com and save hundreds of dollars.
    If you don't know anyone nearby that can help you with your Mac, you can search Apple's main page for "Mac User Group" and by finding a local group they most likely can help you.
    Good luck, I wish i had that Quad, I know what I would be doing with it.

  • Why does the new version FireFox run slower than the old one?

    I have a fairly new computer but Firefox runs slower than the older version. Can this be remedied?

    That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
    You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first.

  • IMac starts up slow and runs slow in general

    Hi everyone.  I have an iMac that is running very slow on startup and often very slow in general.  Any help anyone can provide would be great.  EtreReport is below.....
    Problem description:
    My machine is very slow on startup and pretty slow in general.
    EtreCheck version: 2.1.8 (121)
    Report generated March 28, 2015 12:37:45 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 3.2 GHz Intel Core i3 CPU: 2-core
        4 GB RAM
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                Empty  
            BANK 1/DIMM1
                Empty  
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless: Unknown
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.8.5 (12F45) - Time since boot: 24 days 17:29:1
    Disk Information: ℹ️
        WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
            disk0s1 (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (740.08 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Qustodio/bin/qproxy
        [loaded]    com.qustodio.qnke (1 - SDK 10.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.2) [Click for support]
    Problem System Launch Agents: ℹ️
        [failed]    com.apple.printtool.agent.plist
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.coresymbolicationd.plist [Click for details]
        [failed]    com.apple.wdhelper.plist
    Launch Agents: ℹ️
        [running]    com.carbonite.launchd.carbonitealerts.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitestatus.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.qustodio.apptray.plist [Click for support]
        [running]    com.rosettastone.rosettastonedaemon.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitedaemon.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.leapfrog.connect.shell.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.qustodio.engine.plist [Click for support]
        [running]    com.qustodio.updater.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    ws.agile.1PasswordAgent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN  (missing value)
        Splashtop Streamer    UNKNOWN  (missing value)
        Flux    UNKNOWN Hidden (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 71 Check version
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.1
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.4.0f5 - SDK 10.5 [Click for support]
        Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
        Carbonite  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
        MusicManager  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 259.27 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.16 GB
            Total number of backups: 54
            Oldest backup: 2013-01-19 17:23:24 +0000
            Last backup: 2014-05-21 13:18:23 +0000
            Size of backup disk: Adequate
                Backup size 999.16 GB > (Disk used 259.27 GB X 3)
        /sbin excluded from backup!
        /usr excluded from backup!
        /System excluded from backup!
        /bin excluded from backup!
        /private excluded from backup!
        /Library excluded from backup!
        /Applications excluded from backup!
    Top Processes by CPU: ℹ️
           106%    CarboniteDaemon
             4%    Google Chrome
             3%    WindowServer
             2%    Dropbox
             1%    qengine
    Top Processes by Memory: ℹ️
        155 MB    Google Chrome
        90 MB    mds
        90 MB    CarboniteDaemon
        69 MB    Finder
        69 MB    WindowServer
    Virtual Memory Information: ℹ️
        1.06 GB    Free RAM
        1.81 GB    Active RAM
        489 MB    Inactive RAM
        941 MB    Wired RAM
        203.88 GB    Page-ins
        8.05 GB    Page-outs

    Here is the console log.  I opened my user account and it lagged for 10 minutes from 8:11 to 8:21.  Everything was very slow.  This is a section of the 44 pages that represented this timeframe.
    4/8/15 8:13:04.538 PM WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 1.89 seconds (server forcibly re-enabled them after 1.00 seconds)
    4/8/15 8:13:05.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4902 [SleepServicesD]
    4/8/15 8:13:08.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    4/8/15 8:13:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4895 [cfprefsd]
    4/8/15 8:12:18.359 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[20]) Exited: Killed: 9
    4/8/15 8:12:18.441 PM com.apple.launchd.peruser.502[4666]: (com.apple.cfprefsd.xpc.agent[4673]) Exited: Killed: 9
    4/8/15 8:12:18.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4673 [cfprefsd]
    4/8/15 8:12:18.000 PM kernel[0]: memorystatus_thread: idle exiting pid 20 [cfprefsd]
    4/8/15 8:12:22.943 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4887]) Exited: Killed: 9
    4/8/15 8:12:22.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4887 [SleepServicesD]
    4/8/15 8:12:28.162 PM WindowServer[95]: disable_update_likely_unbalanced: UI updates still disabled by application "Console" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    4/8/15 8:12:29.822 PM WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 16.66 seconds (server forcibly re-enabled them after 1.00 seconds)
    4/8/15 8:12:33.681 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4891]) Exited: Killed: 9
    4/8/15 8:12:33.000 PM kernel[0]: Google Chrome He (map: 0xffffff8026e87d98) triggered DYLD shared region unnest for map: 0xffffff8026e87d98, region 0x7fff88600000->0x7fff88800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    4/8/15 8:12:33.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4891 [SleepServicesD]
    4/8/15 8:12:38.517 PM com.apple.launchd.peruser.502[4666]: (com.rosettastone.rosettastonedaemon) Throttling respawn: Will start in 5 seconds
    4/8/15 8:12:43.982 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4894]) Exited: Killed: 9
    4/8/15 8:12:44.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4894 [SleepServicesD]
    4/8/15 8:12:44.339 PM Google Chrome Helper[4890]: CGSShutdownServerConnections: Detaching application from window server
    4/8/15 8:12:44.339 PM Google Chrome Helper[4890]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    4/8/15 8:12:48.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4896 [cfprefsd]
    4/8/15 8:12:50.544 PM com.apple.launchd.peruser.502[4666]: (com.apple.tccd[4892]) Exited: Killed: 9
    4/8/15 8:12:50.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4892 [tccd]
    4/8/15 8:12:51.460 PM com.apple.launchd.peruser.502[4666]: (com.rosettastone.rosettastonedaemon) Throttling respawn: Will start in 3 seconds
    4/8/15 8:12:55.118 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4899]) Exited: Killed: 9
    4/8/15 8:12:55.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4899 [SleepServicesD]
    4/8/15 8:12:56.624 PM com.apple.launchd.peruser.502[4666]: (com.rosettastone.rosettastonedaemon) Throttling respawn: Will start in 8 seconds
    4/8/15 8:12:58.666 PM com.apple.launchd.peruser.502[4666]: (com.apple.printtool.agent[4900]) Exited: Killed: 9
    4/8/15 8:12:58.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4900 [printtool]
    4/8/15 8:12:59.764 PM Google Chrome Helper[4818]: bootstrap_look_up2 failed with 0x44c
    4/8/15 8:12:59.765 PM Google Chrome Helper[4818]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
    4/8/15 8:12:59.766 PM Google Chrome Helper[4816]: bootstrap_look_up2 failed with 0x44c
    4/8/15 8:12:59.766 PM Google Chrome Helper[4816]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
    4/8/15 8:13:03.652 PM WindowServer[95]: CGXDisableUpdate: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
    4/8/15 8:13:04.538 PM WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 1.89 seconds (server forcibly re-enabled them after 1.00 seconds)
    4/8/15 8:13:05.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4902 [SleepServicesD]
    4/8/15 8:13:05.794 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4902]) Exited: Killed: 9
    4/8/15 8:13:08.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    4/8/15 8:13:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4895 [cfprefsd]
    4/8/15 8:13:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4889 [cfprefsd]
    4/8/15 8:13:14.000 PM kernel[0]: (default pager): [KERNEL]: System is out of paging space.
    4/8/15 8:13:22.000 PM kernel[0]: (default pager): [KERNEL]: ps_vstruct_transfer_from_segment - ABORTED
    4/8/15 8:13:20.211 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[4895]) Exited: Killed: 9
    4/8/15 8:13:22.000 PM kernel[0]: (default pager): [KERNEL]: Failed to recover emergency paging segment
    4/8/15 8:13:22.000 PM kernel[0]: macx_swapon SUCCESS
    4/8/15 8:13:22.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4906 [SleepServicesD]
    4/8/15 8:13:21.296 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4906]) Exited: Killed: 9
    4/8/15 8:13:21.940 PM com.apple.launchd.peruser.502[4666]: (com.apple.cfprefsd.xpc.agent[4889]) Exited: Killed: 9
    4/8/15 8:13:32.875 PM WindowServer[95]: CGXDisableUpdate: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
    4/8/15 8:13:46.132 PM WindowServer[95]: disable_update_likely_unbalanced: UI updates still disabled by application "Console" after 15.99 seconds (server forcibly re-enabled them after 1.99 seconds). Likely an unbalanced disableUpdate call.
    4/8/15 8:14:12.302 PM WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 42.17 seconds (server forcibly re-enabled them after 1.99 seconds)
    4/8/15 8:14:13.914 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[4907]) Exited: Killed: 9
    4/8/15 8:14:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4907 [cfprefsd]
    4/8/15 8:14:14.069 PM WindowServer[95]: CGXDisableUpdate: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
    4/8/15 8:14:14.662 PM WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    4/8/15 8:14:19.335 PM com.apple.launchd[1]: (com.apple.sleepservicesd[4908]) Exited: Killed: 9
    4/8/15 8:14:19.000 PM kernel[0]: memorystatus_thread: idle exiting pid 4908 [SleepServicesD]

  • NEW macbook pro running slow ~ i hate the rainbow pinwheel

    i have a two-week old MacBook Pro.
    it has been running slow ever since I got it.
    the apple genius bar guy pulled up my activity monitor and said it was normal.
    how can a constant rainbow pinwheel be normal???
    because i use it for business, i had to download Outlook and now i can barely get anything to run without the stupid rainbow pinwheel.
    it has 4GB or memory.  do I need to add another 4GB or is there something else I can do?
    i can't believe how this "powerful machine" feels like i'm trudging in the mud.
    thanks for your help.

    Ok, so I'm pretty new to this and want to make sure I answer each of your questions.
    Right now, my computer is behaving (of course)... so I might need to do this again when I've got a pinwheel or beach ball or whatever they call that spinning rainbow torture device.  So, the numbers below reflect my computer without the pinwheel (probably not helpful for troubleshooting)....
    What is it, and what is the process? ~ Outlook 20.6%
    Also post the values for % User, 4.89%
    % System, and 8.13%
    % Idle at the bottom of the window. 85.03%
    What values are shown in the bottom part of the window for Page outs ~ 443.7
    and Swap used? 183.7
    kernel.log
    Feb 22 21:07:21 Stacys-MacBook-Pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
    Feb 22 21:07:21 Stacys-MacBook-Pro kernel[0]: HID tickle 176 ms
    Feb 22 21:07:23 Stacys-MacBook-Pro kernel[0]: Sound assertion "0 == fAudioEngineArray" failed in AppleHDADriver at line 3047 goto Exit
    Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: MacAuthEvent en1   Auth result for: c0:c1:c0:23:ed:6a  MAC AUTH succeeded
    Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP
    Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: en1: BSSID changed to c0:c1:c0:23:ed:6a
    Feb 22 21:28:09 Stacys-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
    Feb 22 21:29:45 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    Feb 22 21:29:45 Stacys-MacBook-Pro kernel[0]: macx_swapon SUCCESS
    Feb 22 21:29:54 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    Feb 22 21:29:55 Stacys-MacBook-Pro kernel[0]: macx_swapon SUCCESS
    Feb 22 21:30:30 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Feb 22 21:30:33 Stacys-MacBook-Pro kernel[0]: macx_swapoff SUCCESS
    Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: MacAuthEvent en1   Auth result for: c0:c1:c0:23:ed:6a  MAC AUTH succeeded
    Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP
    Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: en1: BSSID changed to c0:c1:c0:23:ed:6a
    I have no CLUE what I just posted and hope it was what you were asking for.  I truly appreciate your help.  Thank you so very much.

  • Brand new Hp desktop running slow

    I just purchased a new HP desktop computer (HP 110-210).  AMD quad-core a4 accelerated processor, 4GB memory, 500GB hard drive.  The computer has disapointed me because it is far more slower than my 4 year old HP laptop.  Files take awhile to load, google chrome fails to open sometimes.  Overall, the computer is just not as fast as I expected it to be, and honestly, I would consider it to be slow.
    One concern that I had when I purchased it was that it was the floor model (purchased at a discount of course), meaning customers could use it as a test computer.  Although the one I purchased was turned off and not available for use at that time, I would assume it was used as a display computer at one time.  The manager did "reset the computer to factory settings" before packaging it up.  I am currently running a virus scan on mcafee, 36% complete and so far it has found 1 virus.  Wondering if there is any more steps I should take to speed this computer up before I take it back to the store for a refund?

    Hello @Cmal89,
    I understand that your new HP 110-210 Desktop PC has been running very slow out of the box. Given how new your computer is I would suggest you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • New MacBook Pro Running Slow after repairs?

    Hi Everyone,
    I have 3 month old MacBook Pro 2.4Ghz with 4GB RAM running Leopard 10.5.5 which I bought back in June.
    It was working beautifully until a month ago when it suddenly had a problem where the trackpad, the keyboard and the left had USB port stopped working, but it would work with an external keypad and mouse through the right hand USB port.
    I took it o the recommended Apple service centre and the fixed it in a few days by replacing the trackpad the keyboard, the uSB port and the logic board.
    It all works again but has been running really slow ever since, even taking a long time to open up folders and about 4 times as long as it used to to copy files to USB flash drives.
    Any ideas on things I can try to fix it up?

    Thanks,
    Yes I just checked and there's still 4GB or RAM. Another thing I've noticed to day is that the Hard Drive seem to be making a bit of general low background noise when nothing is going on and the activity monityor says not much is happenning. From memory it used to be quieter in the past.

  • New mac mini running slow

    08/26/2011
    I just bought a new max mini with Lion, it is SLOW, SLOW SLOW.  What is wrong?

    Me too! I just posted about this. I bought mine 1 month ago. It's too slow for the lion features. Please let me know if you hear anything. I will too.
    -Ryan

  • New Macbook Pro running slow?

    I just got a brand new Macbook pro little over a month ago and it has been working great. I installed OS X Lion a day after the initial release date and have been thrilled with it so far. It was able to load 1080p HD YouTube videos great, which my old desktop PC would never have been able to do, but within the last week I haven't even been able to load 360p videos without pausing and letting it buffer for a minute or so before watching something. The internet is fine. The signal is strong and the speed hasn't changed on any other internet device in the house. Any ideas on what the problem could be? Any suggestions? Let me know if you need more info.
    Thanks

    usuallly sometimes when many people are using the internet in the house then the internet starts to get slower even when it shows full connection. and if you download too many things then the mac starts to get slow. try doing these things when no one else is using the internet connection

  • Why is my new macbook pro running slow?

    I bought a new macbook pro in october 2012. It has always run very fast without a problem.
    Yesterday i noticed when i opened up apps the app symbol would bounce in the dock for a good 20 - 30 seconds and i would get the spinning beachball icon. I have repaired disk and disk permissions but this has not helped. I havnt downloaded any new apps or anything and my virus software says there is no virus.
    Please help???????

    I am also so dsappointed of buying macbook pro for the first time,and to think it was just almost a month ago....I am worried about the over heating issue,battery span that never lasprot that long as what the advertisement says...I really take extra care of this gadget because it is my first time having this so expenssive lappy...Ooohhh before I forget,my gadget is Macbook Pro 13 with memory of 8gb 1600 MHz DDR3..processor 2.9GHz Intel core I7...the only heave application tha I downloaded was the Mountain Lion I think ,and it was updated now from 10.8.1 - 10.8.2 ..maybe the next heavy app is the google chrome...and the rest is those apps that I bought from the Apple store that didnt cost me $10...before buying this unit ,I am using a lappy from Gateway with windows OS that runs slowly  because of maybe being so old...lol I am using it for almost 3yrs  because I only bought it from a junk shop alternately with Dell desktop thats so cheap,I only bought it almost $200 from a junkshop still.now after learning to fix and upgrade computers,I upgraded the DELL desktop from 1GB to 2GB,but I upraded my hardrive from 80gb to 1000gb...now I did test booting the 2,the desktop and this new Macbook Pro.my dell really boot so fast half more than this macbook pro...when I am downloading videos,really the Dell desktop have the fastest loading and downloading...I am not kidding and telling lies...I am so shock to know the real truth....I am sorry, but i is really true...But I promise my self to take care of this gadget because its my first time to have a genuinely brand new gadget and so expenssive...if no one believe this, i will upload a video on my youtube accnt just to prove that I am not telling a lie...oooh before I forget...just to prove that this gadget is geguine and new, here is the Serial Number of my Macbook Pro 13 which I posses almost a month now.. Serial Number  C0******DTY4
    <Edited by Host>

  • New Macbook Pro Running Slow. What can I do?

    Hey there! I purchased a 15'' Macbook Pro about two months ago. I tried running Starcraft II on it, and it performed great.
    Then, while I was playing, it started running -really- well. I had maxed out all the settings, and somehow the framerate was a constant 90-100. Now if I do this I get about 10 frame rate or less, maybe. If I run on even the lowest settings I can't get higher than 65 or so.
    I know it's not related to an SMC reset or anything like that. I think there must be some setting on the mac that I'd enabled to cause the game to run so well. It's really a great machine- i7 core processor, 8 gigs of ram, a gig of video memory- and it can barely run this game at all, now. This surprises me because my friend's older macbook, which doesn't even have a graphics card, runs the game better than mine does. I think he's on an i5 or i3 processor, with 256 MBs of video memory on an Nvidia card. I'm on an ATI card.
    I've tried reinstalling Lion OSx, I've tried going into Bootcamp, and I've tried all the SMC reset tricks and Disk Repair tricks out there; I've also reinstalled and repaired the game. Another problem is that no drivers seem to work for my graphics card in Windows 7; they all say they're not compatable. Actually, if I run a program called AT Monitor, in OSx, I see that apparently my GPU usage is "0". Does this make sense to anybody?
    And then, if I run my video card in Windows 7, for some reason my computer throttles it to 100hz/150hz.
    Finally, the charger seems to be running really hot, like really hot. I started noticing the heat in the battery/charger around when the computer started not working well.
    I would really appreciate any help! Thanks in advance.

    Third-party system modifications are a common cause of instability and poor performance. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Next, do the same thing with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Next, this command:
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Again, one line. Finally, one more:
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address will appear in the output of the above command. Change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • New - Macbook Pro - Running slow, beach ball spinning all the time

    I've had my Macbook pro about 3 weeks and the beach ball is constantly spinning and I'm constantly having to force quit programs. Between Mail, Safari, and Aperture. Any ideas?
    Robin 

    ONE POSSIBLE SOLUTION:
    I've recently had the beach ball appearing every 30 seconds or so and then the Mac totally freezes.
    After trying all the suggestions online, the solution that fixed my problem was to reset the SMU. It basically forces the fan to maximum power and cools your mac down. The problems I had were being caused by an overheating Mac, even though it looked like a system software issue!
    The reset the SMU:
    Shut your Mac down.
    Unplug the power cable from the back of the mac and any other devices (keyboard, etc).
    Leave the mac for at least 10 seconds.
    Hold down the power button on the back of the mac.
    Keep holding down the power button and re-attach the power cable.
    Once the power cable is in place, release the power button.
    Now press the power button again to start-up your mac. (You can plug your devices back in now).
    You should now hear the fan at maximum levels (it's very noisy!).
    If you have the same problem that I had, your mac should start to cool and your mac should start operating preperly again (it may take a few minutes).
    If this works, you'll then need to download FAN CONTROL FOR MAC.
    It's a control panel that better regulates the temperature of your mac than the standard settings.

  • Satellite C50-A628 running slow

    Good day everyone.
    Sorry if this post is in the wrong section, but, please help.
    I know that maybe some people might think this as a waste of time or just something you could search in google, but, for about *7 months*, I've been trying to figure out why my new laptop is running slow.
    As this laptop comes without any pre-installed operating system, there is no restore disk or factory reset disc. For the first few months of using my laptop, it's been running +windows 8.1 pro+.
    Every time I use it, it opens everything okay, except when my browser is open. everything becomes unstable and doesn't respond. after a few seconds of not responding, I can use it again as long as I don't multi-task. I've installed the latest graphics drivers and some apps, but that's it. I thought that it was a problem with windows 8 about 5 days ago, so I downgraded to +windows 7 ultimate 64 bit+.
    Now, i'm starting to think that maybe the problem is because of the drivers since I didn't install the drivers required for the laptop since it doesn't come with the drivers and reset disk.
    So now, I'd like to ask for support on this matter. Please show the proper installation of windows 7 and the all the drivers required for my laptop which is the *TOSHIBA SATELLITE C50-A628 RUNNING WINDOWS 7 ULTIMATE 64-bit*. (Or any idea on why this problem is occuring)
    Thank you and have a nice day.
    -George B.

    One note: the system performance, especially the internet browser issues has NOTHING to do with drivers preinstalled on your notebook. Mostly drivers are not the reason why the notebook runs slow (open software slowly, etc)
    Fact is that your Satellite C50-A628 was equipped with 2GB RAM.
    Additionaly an part of this 2GB RAM is shared with GPU: Intel HD Graphics
    Therefore less than 2GB are used for system and applications.
    To be honest; this is not enough to run system smoothly!
    I recommend you to upgrade the RAM at least to 4GB/6GB or better 8GB RAM to get better performance.
    Regadign the drivers download:
    The Win 7 driver can be downloaded here:
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
    Choose: Satellite C50-A PSCJGF

  • New 8core mac pro, photoshop CS5 running slow

    Hi all
    I recently decided to switch from PC to MAC. I used to work on a quad core Dell XPS 710 which was very good but decided that an 8core mac would improve the performance of my work flow.
    My new mac is a 2x2.26 quad core xeon with 8 gigs of ram and running the latest Mac OS. The computer itself runs fine but photoshop seems very laggy doing simple tasks such as moving images on layers etc. I've tried allocating up to 85% of the memory to photoshop in the preferences but nothing seems to make any difference.
    At the moment I would say it runs at 3-4times slower than my old PC which seems madness to me
    Any help, tips or advice would be much appreciated
    Thanks
    Trevor

    Yes, something is wrong if it is running slower.
    Did you install the 12.0.1 update?
    Have you tried disabling third party plugins?
    Have you tried updating your wacom tablet drivers?
    Have you tried font cleanup as suggested in the other topics on slowdowns?

  • Premiere Pro CC running slow on my new Mac Pro

    I just upgraded my system to the new Mac Pro(Darth Vader Helmet) and its running slower then my 5 year old tower!? Ill take 15-20 seconds to save a project(small project). The playback is still a bit jerky. Overall it just seems to be lagging a bit.
    Here are my comp specs:
    OS 10.9.2
    3GHZ 8-Core Intel eon 5
    64 GB 1867 MHz DDR2
    Does anyone have any idea why Premiere isnt blazing!?
    Thanks
    R

    Jim Curtis wrote:
    Thanks, Jason, that's what I was wondering about.  Generally, people post to forums when they have problems.
    Yep.  That's usually what happens.  My review will be centered around my usual "benchmark" of editing 2 AVCHD inputs, one PiP'd into the other, synced with an external audio source, and then exported to an h.264 MP4.  CC on my current Mac Pro (modified dual 3.46Ghz Xeon, 48G, nVidia GTX570) takes that task about 1/2t, if t = length of video.  Which is pretty damned good.  I'm hoping the dual GPUs will help scale that export task down a bit more.  I don't expect it to hit 1/4t, but.. hey, maybe I'll be surprised?
    I make about 60% of my living from Pr, and the rest from Ae and other apps (mostly Adobe).
    Given the lack of CUDA, at the moment, I don't expect the new Mac Pro to be a stellar performer with Ae specifically.  I assume that Adobe is working on OpenCL'ing Ae as much as they possibly can.  But from what I understand, it ain't there yet.
    (I'd need a TB monitor and PCI extender, too).
    I can understand the need for the PCI extender, but why the TB monitor?  I'd in no way even remotely consider one of those, just given how ridiculously priced they are.  There's no need for one.  Does your display have a DP input?  You're all set.  No?  It has HDMI instead?  Still all set.  It's dual-linked DVI that becomes problematic.

Maybe you are looking for

  • When I open a pdf in acrobat 9 or reader there is no toolbar on top. Anyone know how to fix this?

    When I open a pdf in acrobat 9 or reader there is no toolbar on top. Anyone know how to fix this?

  • HCM Processes & Forms: Web Dynpro ABAP Search Helps

    Hi, I was working with new functionality for adding Web Dynpro ABAP Search Helps to HCM P&F. Similar to described in http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/17919. [original link is broken] [original link is broken] [original link is bro

  • Test Repository - Use of our own business process model as structure

    We want to use our own business process model as structuring element in the test repository. I entered my hierarchy by the transaction STWBM using environment/application hierarchy / Customer. But my hierarchy is not visible in the test repository. I

  • CS2 and Nikon D300 NEF

    So, please correct me if I'm wrong but if I understand correctly, those of us that paid good money for CS2 will have to upgrade to CS3 to get support for Nikon D300 camera raw. If true, stuff it and I will switch to NX. Maybe we don't pay enough for

  • Regarding Intracompany STO

    Hi Gurus, Here my question is if we can transfer goods from one plant to another plant with in the same company (intracompany) by using movement types. Then why sometimes we are using STO process for intra company.And could you please explain me the