New Gl 0Fi_GL_14 and impact on existing _4 AP and AR datasources
We will be moving to new GL and I'm investiagting the 0FI_GL_14 Datasource for this purpose.I have couple of questions on this datasource.
I couldn't find any related AP and AR datasources for new GL. Does this mean we can continue to use 0FI_AP_4 and 0FI_AR_4 for AP and AR reporting ??
Our current dataflow for GL is 0FI_GL_4 -> GL_O02 ODS-> Custom cube
Since we have lot of reports out of the GL custom cube can we set our new path as follows so that we do not have to re create all the queries. This way we will still be existing cube with ne wGL datasource and ODS.
0FI_GL_14-> 0FIGL_O14->Existing customcube.
Points will definetley be awarded. Thnaks
Hi,
I had also done 0FI_GL_10 in the past with a similar concept as yours and it did work. Plus, during that time I had researched on AP and AR datasources and I don't think there are any new ones like we have for GL. I believe the new datasources for GL are because of the 2 new tables in ECC (FAGLFLEXA/FAGLFLEXT).
I think the solution that you are trying to build should work, will need some testing though, but there is a lot more to offer in the GL_14 datasource than the old GL_4, so you might want to build a new cube to accommodate that. Or you can update 2 cubes from the GL_14 ODS, 1 would be your existing one and other would a new cube, so when the users are ready you can migrate them from the existing to other.
Regards,
Nikhil
Similar Messages
-
BO4 - Changing name of existing connection on repository and impact on existing unx universes
Hi,
If we have universes (unx ) which have connections and want to rename the connection, I know we can change the name of the connection on the repository via the repository resources in the Information Design Tool.
I notice existing universes which use the connection still have the old name for their connection shortcut.
Is there a way to synchronise so that if change a name of universe connection the names of connection shortcust on existing universe connections are automticallly chnaged to reflect the new name?
ThanksHI
Changing name of existing connection not impact on existing unx universe, if backed connection CUID not changes, I think you can rename the existing connection in CMC .
Before doing test with sample example. -
Process to shutdown a EBS on RAC and impact on existing DR(Stand by)
I have to shutdown the 2 node RAC,2 node application for battery replacement.Which is having a DR on place.
>Shut down application on both the node
>Shut down rac database through srvctl
>Shutdown the crs through crsctl
What i need to to at DR which is on mount state during the production is down.
Dow i need to disable something/shutdown DR?Please see:
B.2 Upgrading Oracle Database with a Physical Standby Database in Place
http://docs.oracle.com/cd/E11882_01/server.112/e41134/upgrades.htm#SBYDB4932
Skip all the steps which are related to the primary database upgrade.
Thanks,
Hussein -
Redeemed ITunes gift card and lost my existing balance
Redeemed ITunes gift card and lost my existing balance
Click here and ask the iTunes Store staff for assistance.
(107376) -
I have an existing mini mac and 4 tb external drive.
My iTunes library exists on the external drive under /itunes...
I have purchased a new mini mac and I want to leave the library where it is on the external drive but move to new mini mac and have it show as it did on the old mini mac..
what do i need to do ?
I have found multitude of articles about moving itunes to external drive or other similar things but I don't want to move itunes from the external drive, just change mini mac machines and have everything in itunes the same..
ThanksI had already tried that one and got this...
below is screen shot of what is on the new mac mini
and what is on the external drive now connected to the new mac mini..
There are no media files on the mac mini just the library files and on external just media files..
Do I need to copy anything over from the old mac mini ? xml files ? .. the itunes folder on old mini is about 840mb in size which looks to have artwork ect ? .. I am fairly computer literate, but this one has me stumped.. ?
thanks for help -
iCloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option. I'm prompted for a password to an account that doesn't exist. Anyone know what I can do to fix this or why this is happening.? I had no issue putting in my new Apple ID everywhere else, I could sign out of the old and inactive account and then sign back in using my new and proper one. However, after the update to 7.3 it did a whole welcome to yr iPad and a set up thing and it went to set up iCloud and had my old Apple ID in grey where I can't change or edit it, it wants the password, when I put in the old password, it say yr Apple ID is incorrect but yet it won't let me change it??????? Anyone???
Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.
-
1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?
HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck -
I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
Can anyone advise me on what I need to do?
My existing account is linked to ireland as my bank account details are there, does this make a difference?
Please help!Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.
-
Is it possible to create a new iCloud account and permanently transfer existing store purchases to it?
Thank you for taking the time to try to answer my question. Let me phrase it slightly differently...
I have a very old appleid that I've used for store purchases. I had a MobileMe account that was upgraded to iCloud. I'd like to merge the account data. I've been hoping Apple would come up with a solution to this, but they haven't yet.
So, I'm wondering if I should make a new account of some sort and try to transfer data to it from both of the old accounts. It sounds like that can't work.
I suppose then that the only thing to do is manually transfer all the information from the old MobileMe account to the primary appleid (which is some sort of iCloud + Store combination, no?). That might not be that hard to do, but it is somewhat high risk. -
when my hard drive died I lost my itunes library and now I'm being told that I can't synch my ipod with new songs unless I delete all existing because I can only have one library at a time
Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have a new computer, with some new music on it in my Itunes Library. How do I put that new music from here onto my existing ipod (which has a ~1500 song library from an old computer which is no longer accesible, and which music I do not want to erase)?
I'm not trying to put the music from my old ipod onto my new computer!!!! I don't really want to do that!
I would like simply to see if there is a way to put the new music from my new computer onto my old ipod without erasing all my existing music that I have on there. -
Change in existing Payroll Area and its impact on existing PA records.
Hello,
Can anyone let me know please how easy / difficult it would be to change the description of the existing payroll area lets say "AB" to be the one as per requirment lets say "AC" so that it will show employees as AC rather than AB in the future? Also, if this can be done, would there be any impact on existing PA records (eg, how would they get updated to show the new code & description)?
Many Thanks,
Rachana.Could you please tell the name of that custom report?
One more question is that do the change in payroll area could create the problem while running the retro for the previous payroll area for those employees?
Many thanks
Rachana.
Edited by: Rachana L on Jul 21, 2010 1:06 PM -
EM - Delete Existing Tracking ID and add New Tracking ID
Hello Everyone
I am working on u201CDual Tracking IDu201D issue for EM Project.
Issue: Current design, when Users change Tracking ID (Inbound Delivery Bill of Lading #), In Event Management, we have both Old and New Tracking ID (YTRACK_NO).
Solution: Users / Business Requested to Update Existing Tracking ID (YTRACK_NO) in EM. Anytime in EM, we will have only NEW value of YTRACK_NO.
For the same, I modified FM in ECC and Config (Rules) in EM.
Added Tracking References in Event Message FM whenever there is change in Tracking No.
Replace Existing Tracking ID YTRACK_NO with new Value
ls_trackreferences-evtcnt = lv_evtcnt.
ls_trackreferences-refcod = 'YTRACK_NO'.
ls_trackreferences-refid = <ls_xlikp>-bolnr.
ls_trackreferences-refusage = 'T'.
ls_trackreferences-action = 'A'.
APPEND ls_trackreferences TO lt_trackreferences.
Configuration / Rules in EM:
For YIDN_CHANGED_TRAC Activity:
Iu2019ve added Task12 u2013 Delete Tracking u2013 Activity TRACKING_ID_REMOVE
TASK 15 u2013 Added Tracking ID u2013 Activity TRACKING_ID_SET
Once the FM and Config is completed,
When I change Existing Inbound Delivery BOL #, I see TRACKING ID (YTRACK_NO) is deleted from Tracking ID Tab for Inbound Delivery EH but new Tracking ID (YTRACK_NO) is not added either.
I checked SLG1 ( logs) and I see Activity is Triggered and RC = 0. Donu2019t see any errors either.
I see entry in /saptrx/evm_ref ( New Tracking ID) table.
Any thoughts?
Any help is appreciated.
PS:
u2022 Once the Event Messages is posted, If I do Reprocess Event Messages (Manually), interestingly New Tracking ID is getting added to EH.
u2022 Also if post Event Messages through BADI (/SAPTRX/BAPI_EH_ADDEVENTMSG_02) in EM (manually) , it works Perfectly (Deletes and Adds new Tracking ID)you sign in on apple website and then you can add or remove any account..
-
Using of already existing logical tables and columns in a new subject area.
Hi Every one,
i am new to OBIEE technology.
In my project i need to create a new subject area for already existing RPD.
In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
My question is what is the best way to use them .
I mean just to drag and drop them into new subject area or any other way.
please have your valuable suggestions
thanking youYes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
Hope this helps.
Thanks,
-Amith. -
New contacts are syncing between Outlook and iPhone but existing contacts on iPhone are not showing up in Outlook. How do I get them to sync and into Outlook?
Allan: This worked for this issue -- Thanks!
https://discussions.apple.com/message/21353115#21353115
Maybe you are looking for
-
How can I change the name of a computer I'm getting rid of?
How can I change the name of the computer to my granddaughter's name? It's now called "My name" G5 iMac. I would also like to delete that computer icon in my Devices on my MacbookPro.
-
This looks like it might be a bug in 6.1SP5, weblogic/kernel/Kernel.java at line 85. It's trying to do the right thing to ignore an exception if in an applet but it's ignoring the wrong exception (SecurityExcep
-
Cache-flush VM-related performance issue
Dear forum, I've got a peculiar performance issue going on with the BDB pagecache being flushed to disk. I've managed to reproduce the issue perfectly on three out of three quite different systems that I've tried on, so it is at least quite well-defi
-
Hi Experts, I have a query related to DTW, Is it possible to migrate the open item list of the BP using DTW. (Here in our scenario we need to import all the open invoices/ orders / deliveries related to the BP open balances) If it is possible please
-
Possible to run several concurrent processes form pl/sql in background
Hi, We have a procedure in package in pl/sql which we pass in year and month to. Rather than run these processese serially package.procedure(201301); package.procedure (201302); etc would like to have these run concurrently in paralllel. What is bes