New gl a/c configuration

Hi,
Plz can any one forward new gl a/c configuration.
My mail id:[email protected]

Hi,
Pls. send me the New GL configuration document. My email id is "[email protected]".
Many thanks in anticipation.
Regards,
Chirag

Similar Messages

FLEX Builder Pro 3 New Flex Project cannot configure J2EE

I have FLEX Builder Pro 3 installed on a Windows XP machine. LiveCycle Data Services is installed (with Tomcat) on a Linux RHEL 5 machine. When trying to create a new FLEX project and configuring a J2EE server am very confused on what to put in Root Folder and Root URL. I have tried various paths on the Root Folder (with a drive mapped through windows and also with just using the servername) and keep getting the error message:
Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I've located the flex-confing file in the tomcat5\webapps\ROOT\WEB-INF directory, but still get the error.
Please any help would be greatly appreciated.

Are your new classes referenced from the old code? Mxmlc employs a questionable form of "as-needed" linking, so classes that are not referenced from the main application are not even compiled. This referencing requirement is recursive; that is, any classes that are to be included have to be referenced from the main application, or from classes referenced by the main application, or from classes referenced by classes referenced by the main application, and so on. But if your new classes are not referenced at all from the old code, they will be ignored.

Iam new to Barcode Scanner configuration

Hi friends
             We have a barcode label for delivery document , we have planning to use the barcode scanner for label . if we use way to observe the delivery document details . so end user to have comfortable to fetch the date to SAP System .
            What are the configuration is required for bar code scanner?
            iam a new for barcode scanner configuration, pls help me to do the configuration?
with regards
dinesh

HI
Check this links
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
http://help.sap.com/bestpractices/BBLibrary/HTML/H38_BarcodeInt_EN_DE.htm
Regards,
Krishna.

NEW 9I RMAN: PERSISTENT CONFIGURATION PARAMETERS - INTRODUCTION

제품 : RMAN
작성날짜 : 2001-11-09
NEW 9I RMAN: PERSISTENT CONFIGURATION PARAMETERS - INTRODUCTION
===============================================================
오라클 9i 부터는 RMAN 에서 항상 사용되는 파라미터 세팅을 고정적으로 할 수 있게
되어 매번 파라미터를 주어야 하는 수고를 하지 않아도 된다.
Persistent Configuration Parameters 기능은 RMA 에 다음과 같은 변화를 주었다:
* RMAN 에서 파라미터의 디폴트를 DBA 가 커스터마이징 할 수 있게 되어 사용이 편리해졌다.
* 한번 커스터마이징한 파라미터는 모든 Job 에 적용이 된다.
* DBA 는 'BACKUP DATABASE' 명령어 하나만으로 RMAN 에서 데이터베이스 백업을 수행
할 수 있게 되었다.
* 오라클 9i 의 CONFIGURE 명령어는 RMAN 의 default setting 을 영구적으로 바꾸어 준다.
* 파라미터의 값은 컨트롤파일에 저장이 되며 필요한 경우에는 리커버리 카다로그와 맞추어
주는 과정이 필요하다.
오라클 9i RMAN 에서는는 'show' 명령어로 현재의 파라미터 세팅을 확인 할 수 있다.
SHOW show_operand [,show_operand ...];
show_operand: RETENTION POLICY |
EXCLUDE |
BACKUP COPIES |
CHANNEL |
DEFAULT DEVICE TYPE |
DEVICE TYPE |
SNAPSHOT CONTROLFILE |
ALL
'show all' 명령어로 현재의 모든 세팅을 확인 한다.
RMAN> show all;
using target database controlfile instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/beta/app/oracle/product/9.0.1/dbs/snapc
f_V901.f'; # default
이렇게 Persistent Configuration Parameters 를 세팅하기 위해서는 스크립트를 만들어
수행 하는 것이 좋다:
run {
# Use the configure commands to create your backup policy.
# When complete these will be the new persistent
# configuration parameters for RMAN in the controlfile
# of the target datbase.
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO
'/proj/SME9i/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/proj/SME9i/backup/snapf_prod9.f';
이렇게 스크립트를 수행 한 후에 결과를 확인 하기 위해서는:
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO
'/proj/SME9i/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/proj/SME9i/backup/snapf_prod9.f';
결과는 위와 같다.
--------------THE END------------------------------------------------------

Search button?!?!
Re: seek some good documents on Recovery MANager to start with
Aron

[svn:bz-trunk] 8823: Updated the sample messaging-config. xml with the new disallow-wildcard-subtopics configuration element.

Revision: 8823
Author:   [email protected]
Date:     2009-07-27 09:12:08 -0700 (Mon, 27 Jul 2009)
Log Message:
Updated the sample messaging-config.xml with the new disallow-wildcard-subtopics configuration element.
Modified Paths:
    blazeds/trunk/resources/config/messaging-config.xml

Hi,
could you let us know what version of OEPE you were running prior to the upgrade along with the Eclipse version ? Also was the previous installation a full OEPE install or was it installed via the update site ?
thanks
Raj

Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, how can I have the old version? Thanks!

Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, not going to the website by click "enter", "space" keyboard can not be the page down anymore, always die....
how can I have the old version?
Thanks!

Just to clarify, let's say you have tab 1 Google results and tab 2 something else. When you Ctrl+click a link in tab 1, it opens between tab 1 and tab 2 instead of at the end? Here's how you switch that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
You can switch back to an earlier tab and test. Success?

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

New SDN blog post: Configuring security in STVN2.1 OrgChart

Hi all,
I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
[/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
Enjoy!
Luke

Hi all,
I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
[/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
Enjoy!
Luke

Cannot print wirelessly to a new HP B210 though configuration test is fine.

Cannot print wirelessly to a new HP B210 though configuration test is fine. It keeps coming up, "not connected" or "oof line". I have a 5 year old Linksys Router and connect perfectly to 2 iPads and a new Mac Pro wirelessly all over the house.

Based on what you just expressed, the hardware may be working. However, the software/ firmware is not functioning correctly.
Mario
I worked on behalf of HP.

Can I replace an older Airport Extreme with a newer one by importing configuration file

Can I import the configuration file from an older Airport base station into a newer replacement Airport base station? It would seem this would save me a lot of extra work. First, it would hopefully save time by automatically configuring the new base station without me having to fiddle with the settings. Second, it might hopefully save some more time if I would not have to re-enter the network parameters for all the devices currrently connected to my Airport (wi-fi) network.
Read on for more details.
My old Apple Airport Extreme Base Station (AEBS) is not a gigabit one. Moreover, it's been experiencing some hardware failures recently. So, I recently purchased a new Apple Airport Extreme (base station) that is a gigabit one (Model# ME918LL/A with 802.11ac Wi-FI). Now, I'd like to replace the older base station with this newer one with the MINIMAL amount of disruption and manual work possible.
Regards,
Tony

I relaced an older AEBS with the new one, recently, and did not need to import anything, but if you can save the configuration file from your old one, then you can import it to the new one. I've never tried that when I switched, and it didn't seem to matter which suggests the configuration file may be on disk somewhere.

Using new 7.3 Integrated Configuration Directory Services Objects

I am trying to use the new IntegratedConfiguration objects. I can get the wsdl, create the classes and run everything in my local PC. However when I try to deploy the generated jar file in the PI 7.3 ESR it fails because some of the generated names for the Integrated Configuration resources are too long...longer than 180 characters.
Here is the error:
    Unable to import zip file COP_PI_GL_Integration.jar. Names of
    entries wsdl/com/sap/xi/basis/rootwsdl_IntegratedConfigurationInService_IntegratedConfigurationInImplBean/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean.wsdl,
wsdl/com/sap/xi/basis/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean.wsdl
    are too long. Names can have a maximum of 180 characters
I tried shortening the names of the files before I generated the client for the Integrated Configuration and changes the name for the load in one of the files. After this change I was able to make the code work on my local machine and could upload it to the ESR. However, the code fails in PI because the static constructor does not find the resoruce...I suspect because the name is now different since the name of the file I used to generate things was changed but the actual resource name in PI has not changed.
In short, how can I add IntegratedConfiguration to my jar file in a way that will allow me to upload it to the ESR?

Hello Martin,
first of all thank you for your response!
Did you also face the following error?
"JAX-WS deployable proxy is instantiated with 'new' instead of been injected. Cannot find WSDL URL for service [class com.sap.xi.basis.IntegratedConfigurationInService]" occures in the method "getPort"."
Is it possible that this error is also caused because of the wsdl file and its' location?
What did you change in the wsdl file? The binding? Where did you store the wsdl file and how did you access it with your client? Code snippets are to much to ask i guess?
Looking forward to your reply.
Regards,
Dennis Root

Oracle RAC new feature for interconnect configuration HAIP vs BONDING

Hi All:
I would like to get some opinion about using Oracle HAIP (High Avalibilty IP) for configuring the RAC interconnect vs using network interface bonding.
This seems to be a new feature for Oracle GI from 11.2.0.2 and later. Have anyone had any experience for using HAIP and any issues?
Thanks

Hi
Multiple private network adapters can be defined either during the installation phase or afterward using the oifcfg.Grid Infrastructure can activate a maximum of four private network adapters at a time. With HAIP, by default, interconnect traffic will be load balanced across all active interconnect interfaces, and corresponding HAIP address will be failed over transparently to other adapters if one fails or becomes non-communicative.
it is quite helpful in following scenarios
1) if one private network adapterrs fails, virtual private IP on that adapter would be relocated to healthy adapter.
There is very good document on Metalink ( Doc ID - 1210883.1)
Rgds
Harvinder

New Mac Pro Tower Configuration

Hi
I am currently looking at purchasing a new Mac Pro Desktop Tower to run CS 5.5. I am planning to use it for longer video projects with premier and AE. I would also be using audition to some extent.
I don't think that I can afford to go with a twelve core version of the Mac Pro, but I am wondering what is the best way to configure the ram/processor/video card?
Also are there any compatability issues with OSX Lion?
Any help will do.
Thanks

While the case for building a PC is strong and valid, and while I would build a PC if I needed a new system right now, I also understand the needs of some institutions to build a Mac. Here is my advice in that regard:
1. You don't need dual processors. I have a single 6-core 3.33GHz chip in my 2009 Mac Pro (which I upgraded myself) and it handles heavy work in Premiere and After Effects CS5.
2. Don't buy any RAM from Apple. With the price of hard drives today, it isn't such a big deal to have Apple install extra drives for you, but if you're even slightly technically inclined, you can install more RAM and hard drives for less if you shop and buy from other vendors. There is a great Mac-specialty website where I buy my RAM from called OWC (Other World Computing link) that has excellent deals and service. I think 24GB is minimum ($322), and 32GB is better... only $425 right now.
3. If you have the budget, a proper third party RAID card is a much better deal and performer than Apple's Mac Pro RAID Card, so don't waste your money there unless you really want to limit yourself to an internal RAID 5 of no more than four disks. I got by with a 3-drive RAID (AID) 0 stripe of disks for a year before needing to expand to a proper RAID. With three Apple drives striped together, you'll get a sustained data throughput of 330MB/sec both read and write speed, which is good enough to edit some HD video. I edited a feature-length film shot on P2 at 108060i/24p using only three internal Apple 1TB disks, with backups to external drives holding a safety net for my data.
4. You don't need to buy an NVIDIA /CUDA card (Quadro 4000). I have the 5870 from Apple, and I can edit DSLR 5DMkII footage in smooth real-time, but that is helped by the 32GB of RAM and fast RAID. I have a CUDA card, an older GTX285, and while it was good for Premiere, I felt it was slower than the 5870 in After Effects, which is where I spend more time rendering anyway.
I'm not sure how much weight you'll be placing on student projects being safe from loss in the event of a drive failure, but you could either have them back their projects up themselves on their own external drives, or build a robust RAID. I have an Areca RAID card that runs eight 2TB disks in RAID6, which yields 12TB of very fast data that is also still safe if any two of the eight drives fails before being replaced. Depending on the number of students using the system, it could cost less to build a similar RAID than have each student buy their own drives. Question is, does the school eat that cost of security for the students, or let them shoulder that cost themselves?
I was a film school student myself, and I know what it's like to sign up for a four-hour block on a limited number of edit suites. You want the system to run faster than the students, so they can be creative without wasting their time slot waiting for the computer.
With your education discount from Apple, you should be able to get a 6-core 2010 Mac Pro, RAM, disks (and RAID if you go that route) from 3rd parties about $6000... much less if you skip the RAID system. If I can help in any way, let me know. I love my system, even if I could build it in a PC today at half the cost. Adobe works the same (or better) on a PC as it does on a Mac once you're in the software, but if you have to go Apple and can't wait for what may come out in the future, consider a system like mine.
2009 Mac Pro (updated to 2010 firmware... you'd buy a 2010 and not worry about that.)
3.33GHz 6-core CPU
ATI Radeon HD 5870 (still runs software acceleration very nicely)
32GB RAM @1333MHz
(4) internal hard disks (1=OS X, Adobe CS5, 2+3=RAID0 (stripe) for scratch files, 4=other backups and storage)
Areca 1880ix-12 RAID card
Sans Digital 8-bay tower
(8) 2TB WD RE-4 hard disks in RAID6 = 12TB parity array (sustained 816MB/sec write, 714MB/sec read speeds)
Various backups in external disks.
Good luck!

ANN: New Technical Paper - Software Configuration Manager and Oracle Forms

Check out the new technical paper
"Oracle9i SCM and Oracle9i Forms Integration" at:
http://otn.oracle.com/products/repository/htdocs/9iscmforms.html
This paper shows you how to use Oracle9i SCM to manage team development and version control of Oracle Forms projects.
You can also diff and merge FMBs.
More info on Oracle9i SCM - part of Oracle9i Developer Suite at: http://otn.oracle.com/products/repository/content.html

We got the configuration upload to work today and it did show up rather fast on Metalink 3. What we ended up having to do, was to install the software twice on the server once in the c:\sba80\gtwysrvr and once in the c:\sba80\siebsrvr directory.
If you are behind a proxy remember to use the -p parameter when calling setupCCR.
Axel

New parameter report symbol configuration

What is the end to end process of creating new report symbol .Do I have to create separate function module and assign in the configuration .

Hello M D,
1. You would need to configure a symbol group and assign function modules to it, if no suitable existing symbol group available.
There are two function modules assigned to each symbol group:
The first function module is used for symbol expansion. Use function module 'C12O_PARAMETER_VALUES_SELECT' for symbol expansion.
The second function module is used for default parameter determination of symbol groups. You can copy the existing function module for determining default parameter values for any standard symbol groups and change the copied function module according to your requirement to fill the values for parameter symbol.
2. Then, you configure a new parameter symbol and assign it to the symbol group.
3. Add the parameter symbol in the report template.
4. Development to be done in the function module for determining default parameter values, assigned to the symbol group, to populate the value for the parameter symbol based on your requirement.
Thanks and Regards,
Kannan Veerapandian.

New gl a/c configuration

Similar Messages

Maybe you are looking for