NEW GL and PROFIT CENTER REPORT

Hi,
In New GL ( ECC6) the profit center is also available in GL itself. Under this situatrion Profit center data is flowing to Controlling.
Previousl we take Profit center report from 8 series Library and use it for report painter.
Now what is the library to be used for report painter for generating Profit center reports with drill down functionality like Cost center report from COntolling module.
Is it necessary that we have configure in CO module lo to get the Profit center so that we can generate the Profit center report more user friendly reports.
What is the route to be followed to enable the users to check ther B/S on Profit center.
Appreciate your early response please
Regards,
Chitra
Rajesh J Salecha
Posts: 80
Registered: 4/17/07
Forum Points: 44
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: NEW GL Report
Posted: Sep 8, 2009 11:57 AM    in response to: Chitras           Reply
Hi,
I think this thread is more relevant for ERP-financials....
Please visit below link for the resolution for your query.
SAP ERP Financials
Regards
Raj
Chitras
Posts: 162
Registered: 5/10/07
Forum Points: 64
   Re: NEW GL Report
Posted: Sep 12, 2009 8:26 PM    in response to: Rajesh J Salecha     Edit          Reply
Hi Rajesh,
As the message has gone to BI Forum I am copying the whole message for yr response please.
I was away for few days and Ihave seen yr response. .
Whne I click the link it does not take me to the right place but it goes to the Forum header page only -- not ot th specific answer/thread.
Appreciate if you could send me the right thread to learn from it.
Thanks, Chitra

Sorry I was away.
I am in ECC 6 and the New GL report gives Profi center report . But I ca get the comfort like 8A ledger with drill down.
My doubt is will the new GL report takes care of all CO related transactions w/o GL?
Thanks, Chitra

Similar Messages

Amount difference (0.01) between GL and profit center reporting

Hi,
After we run 1KEK for ARAP transfer to profit center there is amount difference (0.01) between GL and profit center reporting for customere reconciliation account. We checked F.5D and rerun 1KEK this issue still exit.
Any idea for it? Thanks.

hi Kyle,
thanks for the effort, but it wasn't the thing i asked for ...
what i would like to find out is:
if CO area settings are set w/o profit centers, why the system still demands profit center assignment with cost center master data (ie.)
well, i can always turn off the message, but this isn't the solution i want to use ...
i will rather open one PC (along with dummy, of course) even though those are not used for the customer ... although, this will not solve statistical posting to cc with cost element category 11 ...
d.

New GL and Profit center settings

hi,
i've already tried to find out this on other thread, but with no reply -
so i am asking again -
does anyone know the correct connection/explanation for the issue below?
"2) Profit Center Integration - With the new GL, Profit Center Accounting is an integrated element of the reporting ledgers. No need for a fully independent PCA implementation."
if a customer is not implementing PCA and indicator in CO Area (OKKP) is not set for PCs, the system still validates PCA because it seems that a year entries with PCA connections in CO area are created by default - entries in table V_TKA00_PC; and "ignoring" Profit center inactive indicator settings within the CO area
ie. cost centers need assignment to PC .. and revenue postings are done to cc as statistical not actual ...
this is happening in sap ecc 5.0 and I would like to verify is this a rule or there is a bug?
thanks in advance
d.

hi Kyle,
thanks for the effort, but it wasn't the thing i asked for ...
what i would like to find out is:
if CO area settings are set w/o profit centers, why the system still demands profit center assignment with cost center master data (ie.)
well, i can always turn off the message, but this isn't the solution i want to use ...
i will rather open one PC (along with dummy, of course) even though those are not used for the customer ... although, this will not solve statistical posting to cc with cost element category 11 ...
d.

DOC Splitting in New GL and Profit center accounting activation

Dear All,
I am in a dilemma regarding the following -
We are activating doc splitting with profit center and segment as characteristics.
1) While maintaining Controlling area settings(OKKP) - do we need to activate "Profit Center Accounting" component?
2) Similarly, in IMG-Controlling - Profit Center Accounting- Basic Settings-Controlling Area Settings-Maintain Controlling Area Settings (0ke5), do we need to maintain any settings?
I am of the opinion that ,based on the SAP Note - 826357, that we need not activate PC accounting as it is built into New GL Accounting.
I am also of the opinion, again based on the note, that we can use classic PC accounting, but the note recommends and I quote
we do not recommend you do this on a long-term basis due to the increased data volume and the increased time and effort required, and in the case of active document splitting, the update response changes.
But I am not able to come to a conclusion.
In earlier implementations, I activated PC accounting in OKK5 in New GL doc split scenario. So keeping that in mind, pl guide me.
Thanks & regards,
Gov

Hi
Please set the Profit Center Accounting with Controlling Area.
SPRO->CONTROLLING-->PROFIT CENTER ACCOUNTING -->CONTROLLING AREA SETTING -->MAINTAIN CONTROLLING AREA

Cost Center and Profit Center Planning

Hi,
I have one Co issue. Pls Suggest me the wiseful solution.
Cost Center and Profit Center Planning.
For F-2008 Planning data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas). when comparing the cost center report to profit center report, both are not matching. the reason when i see and reconcile the document nos and values in between cost center and profit center reports i found out that there are some documents are missing in the profit center report.
wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07. In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/- But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
Note. As and when KP06 Plan data has been updated Profit Center line items are generating. It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
Observations From My Side:-
I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
My Question is
1.Upto what extent it will work.
2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
Pls suggest me the wiseful way to solve the

Hi
Try This
BAPI_COSTCENTER_CREATEMULTIPLE
BAPI_COSTCENTERGROUP_CREATE
BAPI_PROFITCENTER_CREATE
BAPI_PROFITCENTERGRP_CREATE.
Regards,
V.balaji
Reward if usefull

The structure of the profit center report in new GL

Hello,
I must finish a query for the customer this week. This query must base on a sap standard report for the new GL.
Because our ECC 6.0 system hasn't the Enhancement Package 3 (contains the necessary new features) yet, so I can't see this standard report which should be displayed under the path:
SAP Menu --> Accounting --> Financial Accounting --> General Ledger --> Information System --> General Ledger Reports (New) --> Profit Center Reports --> S_E38_98000088 - Profit Center Group: Plan/Actual/Variance
Can somebody tell me the structure of this report, if you can see this report in your system?
- Which key figure has been used in the report?
- What are in the rows and columns?
- Which characteristics are available to navigation?
- Which variables and General data selections are there?
Hope somebody can help me. Thanks a lot!
Best regards,
Yuanyuan

Hi,
Then my suggesion is you copy the form & report structure of most suitable report (which you have downloaded through FGIQ) .Modify the form according to your reporting requirement. Create new report by coping standard report & assign this newly created form to this report.This will serve your purpose.
Please do not make any changes to standard report.Copy it & then do the changes.
Transaction code for the same is FGI0 or FGI1 or FGI2 or 3 or 4 or 5 or FGI6.
Second suggestion is in SPRO in GL information system (infact in each information system ) you will find drilldown report node in that import report transaction e.g. FSIQ .Import all reports you might get your required report.
Regards,
Abhijit

NEW GL profit center report in Controlling area currency

Hi all,
Could anybody suggest me,
how do we have the New GL profit center report in controlling area currency.
or else if any possibility for report painter report please suggest.
Thanks
kishore

Hi Kishore
New GL PCA values are stored in FAGLFLEX* tables.
These are FI tabls and they store values in 1st 2nd and 3rd currency of FI. If your control area current is same as anyof these, you can access report in that currency
Else, you can do the conversion inside your report using a static exchange rate
Br. Ajay M

Vendor Ageing Report Business Area and Profit Center wise

Dear Experts,
I have a requirement where user wants a Report for Vendor Ageing Business Area and Profit Center wise.I checked Standard T Codes but the same were Business Area wise but i could'nt find Profit Center wise Report.If their is any standard functionality then please advice.
We are using SAP ECC 6.0 Classic GL with Spl Purpose Ledger active.Can someone please advice can i derive such a report through Report Painter.If possible please advice in details.
Your Valuable inputs shall be appreciated....
Regards
Rahul

Hi Durga,
Can you please elaborate further on the same how you are determining the Report in FBL1N.What are the prerequisited to be taken care of and some further details on the same.
My Bus Area is not as same as Profit Center eg
BA          PC
FXRT     RT0001 / 2 / 3
TMMG   TM0001/ 2 / 3
LTOB     LO0001/ 2 / 3
I checked in my system but we do not have the Program for the following T Codes
S_PCO_36000218 - Segment Receivables
S_PCO_36000219 - Segment Payables
S_AC0_52000887 - Profit Center Receivables
S_AC0_52000888 - Profit Center Payables
Regards
Rahul

Report painter, Internal orders and profit center accounting

hi,
I want to do a report using data from internals orders (AUFNR) and profit center accounting (PRCTR).
I can make individual reports for internals orders (6O1, CCSS) and for profit center accounting (8a2, GPLCA) but I can't combinate data from internals orders and profit center accounting.
Is it possible make a report using report painter that show data of internals orders and profit center accounting.
All my internals orders have a profit center accounting.
Thanks in avanced

[url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
this may be helpful
regards.
santhosh reddy

Std report to dispaly Sales Order and Profit center data

Hi,
I want to display list of Sales Order and profit center in one report for that Sales organisation
Is there any T-code where i can view Sales Order and its Profit center.
**Plz if anyone knows abt this reply soon.
Thanks
AKASH
Edited by: AKASH TAMBI on May 20, 2008 1:28 PM

Dear Akash
There is no standard report to see both the sale order reference and profit center. However, if you go to SE16 and use table VBAP, you can see the required details
thanks
G. Lakshmipathi

Report Needed to show WBS and Profit Center on Invoices

I need a report of open and cleared invoices that show the WBS and Profit Center.
I have tried the FBL5N and it doesn't populate it. Any other reports out there???

You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
In the report , keep profit center and cost centre as free char.
The users can dynamically drill down and view the report for cost centre or profit centre or both.
Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
Ravi Thotahdri

Profit Center Report and P&L difference

Hi Experts,
I have setup the following scenario with Profit Centers:
I created a Profit Center called 'A' and another called 'B'.
Then I created a Distribution rule 'AB' directly allocates 75% to A and 25% to B.
I added an Invoice for a line total of $100 and used this Distribution Rule. This did pull through to the Journal Entry.
My question is regarding the Profit and Loss Statement that will not pick up the Profit Center 'A' when I specify this in the Expanded button. This will however pick up the 'AB" for the total amount of $100.
I would have thought that if I ran this only for 'A', I'll see the value $75 in the P&L....
I looked at the Profit Center Report for this invoice and there I could see the $75 for the Profit Center 'A'.
Please let me know what I'm missing, or if you are not able to see seperate Profit Centers in the P&L.
Regards,
Marli

Hello Marli - are you running the Profit Center Report which shows that information???
Path of Finances > Cost Accounting > Profit Center Report...
I do not belive the profit center is on the Profit and Loss Statement (unless you set up each profit center with a specific GL Account Segment)...
Take care - Zal

Using Business Area and Profit Center Accounting with New GL functionality

Hello,
We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
-     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
-     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you

Hi Sachin,
Thank you for the reply, we want to know that
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
-     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
-     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you
Tipu Khan

Cost center and profit center in the same report

I am working on creating a report using report painter/writer. my question is, will it be possible to create a report with cost center group in one column and profit center group in another column and the rows with GL account groups.
I know that GLPCT table dosent have the field KOSTL(cost center) in it. The library I am using is from GLPCT table. But when I checked the characteristics of the library that I am using, it has KOSTL field in it. So I checked that field on and tried to use it in the report. But when I execute the report, an error pops up saying "Characteristic KOSTL cannot be combined with the key figures".
Can someone explain what exactly that error means. and if there is a possible way of using both P.Ctr and C.Ctr in two different colums in the same report.

I am asked to create a report which has information of both profit centers and cost centers. some of the fields on columns are cost centers and others are profit centers. This report is basically a P&L summary report for various divisions.
Infact, when I use one basic key figure for cost center and other for profit center and execute the report, it is working!!!!....Is it ok to use two different key figures on two different columns? i dont understand where it is picking the values from..cos cost centers are not present in GLPCT table.

Re: Report painter - Creation of Profit center report (New GL enabled)

Hello all,
I am trying to create profit center report using report painter. I am trying to create formula variable to show the cumulative values for the elements assigned to the profit center.
I want to get values for cumulative period ie for eg if i give 12 as period on selection screen i want to get the cumulative value for per 1 + per 2 + per 3+ per 4 + ......... + per12.
I did the following for getting the cumulative values for period.
1. created Formula variable ZPER01 with formula '#S006'
2. created formula variable ZPER02 with formula IF 'ZPER01' > 1 THEN 'ZPER01' + 1 else 17.
3. IF 'ZPER02' > 1 THEN 'ZPER01' + 'ZPER02' + 1 ELSE 17
3. continued the creation until ZPER16 with formula IF 'ZPER05' > 1 THEN 'ZPER01' + 'ZPER02' +
'ZPER03' + 'ZPER04' + 'ZPER05' + 'ZPER06' + 'ZPER07' + 'ZPER08' + 'ZPER09'+ 'ZPER09' + 'ZPER10' + 'ZPER11' + 'ZPER12' + 'ZPER13' + 'ZPER14' + 'ZPER15'+ 1 ELSE 17
Could you pls help me with your inputs.
Many thanks.
Regards,
Pabbi.

Hi,
You can copy your Report Writer or Report Painter reports from Profit Center Accounting to new General Ledger Accounting. This is possible for standard reports as well as your own reports. A corresponding tool supports you in this.
Prerequisites
In classic Profit Center Accounting, you have standard reports or your own reports that you want to copy.
To be able to use the Report Writer reports or the Report Painter reports in new General Ledger Accounting, you need to have assigned the scenario Profit Center Update to at least one ledger in Customizing for Financial Accounting (New).
http://help.sap.com/erp2005_ehp_03/helpdata/EN/47/1360faad483127e10000000a1553f7/frameset.htm

NEW GL and PROFIT CENTER REPORT

Similar Messages

Maybe you are looking for