New gl and reporting

hi gurus,
i have configured all steps required for new gl. now transactions are posting, suppose at a particular day i want to see p&l and balance sheet of a profit center then how can i do that.
thanks & Regards,
manoj
Moderator: Please, avoid asking basic questions

Check in KE5Z T.code for actual Posting . you can also check in .S_ALR_87013336 - Profit Center Group: Balance Sheet Accounts Plan/Actual/Variance
Thanks
Goutam

Similar Messages

How to apply modified UI Defaults to existing forms and reports?

Hi all--
I've been struggling with UI defaults and after searching through posts in this forum, it doesn't look like I'm alone.
Is there a way to apply changes made to UI defaults to existing forms and reports? New forms and reports pick up the changes, but can they by applied retoactively?
Thanks in advance,
Dan Krautheim

Thanks for the update,
We have a develpment 10g AS environment setup made,
1) But we are really confused how to present the forms and reports.
We have around 250 forms and reports running on client/server architecture. All these forms/reports have been copied to a fileshare and access control is restricted by folder security.
2) How to deploy forms - entries within formsweb.cfg with Named Configuration sections.
3) How to deploy reports, as to were to copy the .rep files.
getting the following error
REP-110: Unable to open file 'Car_Readings.rep'.
while trying
http://kddsvr6.kddc.com:7778/reports/rwservlet?report=Car_Readings.rep&userid=username/passwd@db&desformat=htmlcss
Thanks in advance,
AJi

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
I tried to loading in "safe mode" but I still could not open Firefox.
I never received a crash i.d.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Thank you. The old one will stay reported?

HT4528 On the TV news was a report about Apple iPhones and iPads that they were unsecure. What does applet recommend

On the TV news was a report about Apple iPhones and iPads were unsecure. Has apple adressed this? What does apple recommend?
to fix this problem.
I get email from Contacts in my address book. The email is not really from them. Is this the issue at hand?

Tee Man wrote:
On the TV news was a report about Apple iPhones and iPads were unsecure. Has apple adressed this? What does apple recommend?
to fix this problem.
The latest version of iOS (7.0.6) fixes the problem. Update your phone if you're not already running 7.0.6.
I get email from Contacts in my address book. The email is not really from them. Is this the issue at hand?
No. That has nothing to do with it. That's called "spam".

Announcing new activity logging and reporting capabilities for Office 365

Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks Community

Hi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

EXPDP generates new dmp file and reports "file already exists" error

Hello everyone,
Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
ORA-27038: created file already exists
Additional information: 1
Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
Your advice is highly appreciated.
Thanks.
Edited by: 904668 on Dec 27, 2011 8:47 AM

i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

How to deploy forms and reports in the new upgradation of OAS?

Hi All ,
I have an application. In that I have Oracle Application Server - 10g release 1.
Now I have upgraded OAS to 10g release 2 .
1.what are the steps are needed to deploy the forms and reports in that newly installed OAS ?
2.Do I need to recompile all fmbs / mmbs / plls etc.,
4.Do I need to set any files like conf file ,env file ?
3.Is there any documents for this please provide the links ?
thanks All
sai
Edited by: user12045030 on Aug 24, 2010 6:58 AM

Use a batch file for that:
@ECHO OFF
cls
Echo compiling libraries....
for %%f IN (*.pll) do frmcmp userid=%1 module=%%f batch=yes module_type=library compile_all=yes window_state=minimize
ECHO libraries compilation complete
ECHO ----------------------------------
Echo compiling menus....
for %%f IN (*.mmb) do frmcmp userid=%1 module=%%f batch=yes module_type=menu compile_all=yes window_state=minimize
ECHO menus compilation complete
ECHO ----------------------------------
Echo compiling forms....
for %%f IN (*.fmb) do frmcmp userid=%1 module=%%f batch=yes module_type=form compile_all=yes window_state=minimize
ECHO form compilation complete
ECHO ----------------------------------Francois

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new Ipome and Ipad. and Ipad. Now I'm told I need to upgrade my operating system. The apple store gave me conflicting instructions. Any suggestions? Thanks

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!

There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing!

My Firefox browser opens to a white screen and when I try to browse a website it opens a new page and is also blank

- installed a new updates for windows last night and restarted my PC
-When I open my Firefox browser it sits at a white screen, with nothing in the URL area.
-When I try to go to a website it reloads says "New Tab" and doesn't load any content and stays blank.
-running version 17.0 on Firefox
-Running Windows 7 64-bit
-updated patches from Microsoft on 12/12/12
-All my other browsers (chrome and IE) still work properly.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

Question regarding material for Forms and Reports

Hi, I'm good at SQL, now that i would like to learn Forms and Reports in Database. But i dont know like where to start and how to start. Could someone please help me out like what i need to do to learn them. As i said i'm very much new to these concepts.
Thanks in advance

Hello,
if buying abook is an option for you and you are speaking german I would advise you to get
Perry Pakull, Stefan Jüssen, Walter H. Müller:
"Praktische Anwendungsentwicklung mit Oracle Forms", HANSER Verlag ISBN-10: 3-446-41098-8. Have a look at
[http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer|http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer]
Regards
Mario

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

New gl and reporting

Similar Messages

Maybe you are looking for