New GL impact with MM/PP Module

Hi SAP folks
Would like to know if you have any document or link which provides information or if you cna share the impact to MM/ PP module when new GL is implemented / migrated from classic GL.
Thanks
Achuthan

There are many things involved in it.
First of all the MSD materials are non valuated and non stock materials, so mostly in media industry they do not use production planning module.
One more reason for this is that the life cycle of the material they produced is 1 day. and the cost of production is always higher then cost of sale , because there reveneu comes basicaly from advertisements.
so my suggestion is that if you want to integrate the MSD and PP together then how you are going to plan the production, since normaly the no of pages needs to be printed on D day , mostly they will finalise on D-1 day for main paper and for suppliments may be D-2 days.
also the no.s of pages also finalised on the same time when they finalise the no. of copies to be printed.
Also the most expensive part in printing industries is newsprint, which i think 80% of production cost rest is ink and plates.
And most of the printing industries do not have information that how much quantity of newsprint was consumed in a particular edition , similarly is the case with ink.
So with the use of PP you can use materials planning, and regarding scheduling also you can not tell in advanced , since the time gap between plan and production is very less.
Also with stadrad R/3 you can not plan which edition to be printed on which machine and when.
so insted of doing std. PP with MSD integartion , i suggest use them seperately.

Similar Messages

What are the impacts of new gl migration on other sap modules.

Hi
In need to move to IFRS reporting, my client is planing to migrate from classic gl to new gl (not yet decided which scenario, but most probably we will go with scenario 5).
We are in stage where we are assessing new gl functionality, impact of new gl migration on other SAP module and what precautions we should carry while drafting project activities for migration plan.
I am specially interested to know how are other modules impacted by New GL? Ex. SD, MM, HR, Treasury, CRM ?
Thanks,
Surendra

Hi Karthik,
I have already gone thru OSS notes 1014364, 1039752, 1070629 and many more...
My specific question is, what are the impacts of New GL migration on other SAP module (HR, SD, MM, CRM, and Treasury). I am well aware of impact/changes within FICO.
Thanks,
Surendra
Can anyone tell with their experience if any of the above listed modules have any specific impact/change when we migrate to New GL from Classic GL?

Create new settlement rule for an order with a function module

Hi,
I would like to create a settlement rule for an order. I searched for existing function modules and found K_ORDER_SETTLEMENT_RULE, which seems to be the correct one.
The problem: The settlement rules, which I create with this function module are not saved.
Do I have to call another function module to save my new rules?
Thanks in advance,
Fabian

Hi,
Settlement rules are first of all defined in customizing how the should be behave and secondly lies the question how to update a CO cost object with this settlement rule.
My first advice would be to use the "automatic settlement derivation feature" that can be setup in customizing alike. <b>SPRO -> Controlling -> Internal Orders -> Actual Postings -> Settlement -> Automatic generation of Settlement Rule</b>. Read the docu for this node (right click and choose Display documentation) to understand what possibilities and limitations this functionality has. Below this node you have the possibility to define a "settlement strategy" and allocate this to a order type. You can also define a Enhamcement (COOM0003
) where you can somewhat influence the automatic generation of settlement rules.
Execute transaction KO8G (collective processing) or KO88 (indicidual processing) to create a settlement rule for internal orders.
The other option you have is to create a custom program based on BDC to create settlement rule for internal orders.
I think the BDC program would be a better idea for you.
Let me know if you have any question.
Regards,
RS

What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

Hi all,
I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

ARealMac(PPC)User wrote:
...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could go on the external.
In any case, your data is more important than your SSD, so back up, back up, back up.

Msi Big Bang Xpower II can only run with 3 memory modules?

Hello there! I've just got my new system up and running. But it cant boot with 4 memory modules when there is a module in slot 7? I have a 4x8gb kit from corsair (CMP32GX3M4X1600C10), and a Msi Big Bang Xpower II..
When i start it, it just shows me the debug code "67" which is "Late Cpu Initialization" according to the "User Guide".. It stays there, for about 15 seconds, then it shuts down, and does the same, over and over..
Atm, i'm running with 3 modules, and there's no problems at all! I've testet ALL memory blocks, in another computer, and they run just fine..
What should i do?

Quote from: xmad on 25-September-12, 21:09:52
Also, what cpu, bios version , memory type etc
Make sure the mem mods are in the proper slots for tri channel operation.
>>Posting Guide<<
If everything comes up clean, update to the most recent bios. Only do this if your computer is stable in bios. IE You are only having crashes in windows etc.
>>Use the MSI HQ Forum USB flasher<<
http://www.msi.com/product/mb/Big-Bang-XPower-II.html#/?div=BIOS
**Merged
Core i7 3930K, V1.2 Bios, 32GB Corsair Dominator Quad channel 1600Mhz Kit.. The memory are installed as the manual says..

Multi-Org impact on Oracle CRM modules especially on Oracle Service

Multi-Org impact on Oracle CRM modules especially on Oracle Service
====================================================
I have been searching for any information (notes,whitepapers/ presentation) on the impact of multi org implementation on Oracle Service module and so far not been able to find any either on metalink or on internet.
Any of you have any inputs on this ? Please provide the same if any.
basically,
Looking for the kind of security applied on SR creation form,Debrief form and charges form when a multi org is enabled.
I also tried to test this out in our instance and found that it seems to have no impact.
Gana

HI,
Yes indeed there is a impact of MULTI-ORG on the Service Module in 11i.
All the things are integrated now.
Everything is dependent on the MO:Operating Unit Profile Option and the setup which you had done.
1)
Security on SR creation Form:-
See you can implement the security, but for that you have to setup accordinglly and also to follow the process.
If you create 2 responsibilities with MO profile option different, then none of them will able to see the others data.
Note:-
But if you are using the instance to generate the SR, then you had to make it sure that the ITEM which you are using should be assigned to the Operating unit which is set in the MO profile Options of that responsibility.
2)
Debrief Form:-
As you must know that for debrief to work, you had to setup the Service Activities.
This is where you can define the security.
1) Create a Service activity,
2) Map it with BILLING TYPES
3) Map the Billing Types with Order Management Header and the Line Type
This the place where you can specify the Operating Unit.
When a user will log in and open a debrief form, then he will be able to see only those service activities which are mapped with the operating unit as that of set in MO Profile Option to the user.
3)
Charges:-
The same as the debrief is applied on the charges TAB.
Here you will only able to see the Service activites which are mapped with the operating unit as that of set in MO operating unit.
If you want ITEM level security, then you will be only able to see the items which are assigned to the Operating unit as that of set in the MO profile option.
Hope this will clear your doubt.
If want more clarification, you can ask me.
Regds,
Vikram

Issue with gui_download function module

Hi All,
         I have an issue with gui_download function module that it is creating one extra line while downloading my internal table data into text file,which i donot want.i have searched for various threads but couldnot get the proper reply.Or please provide me some other Function Module which will not create one extra line.Please help.

part 2
INCLUDE RPPPXD00.
DATA : BEGIN OF COMMON PART A.
INCLUDE RPPPXD10.
DATA : END OF COMMON PART.
INCLUDE PC2RXTW0.
INCLUDE RPC2RX00.
DATA : BEGIN OF COMMON PART B.
INCLUDE RPC2CD00.
DATA : END OF COMMON PART.
INCLUDE RPPPXM00.
INCLUDE RPCMGR00.
AT SELECTION-SCREEN OUTPUT.
CONCATENATE SY-DATUM2(6) SY-UZEIT0(4) INTO REF_NO.
LOOP AT SCREEN.
    IF R1 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
        SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT'"SOC BY ANKITA"
       OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
       OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
       OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
       OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R2 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
         SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
         OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
         OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
         OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R3 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
        OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
        OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
        OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R4 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'"SOC BY ANKITA
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
SELECT SINGLE * FROM T549Q WHERE PERMO = '01'
                             AND   PABRJ = PRD+0(4)
                             AND   PABRP = PRD+4(2).
FR_DT = T549Q-BEGDA.
TO_DT = T549Q-ENDDA.
CONCATENATE FR_DT0(4) FR_DT4(2) INTO FR_P.
CONCATENATE TO_DT0(4) TO_DT4(2) INTO TO_P.
PN-PAPER = PRD.
PN-PERMO = '01'.
GET PERNR.
RP-PROVIDE-FROM-LAST P0003 SPACE PN-BEGDA PN-ENDDA.
RP_PROVIDE_FROM_LAST P0001 SPACE PN-BEGDA PN-ENDDA.
IF PNP-SW-FOUND EQ 1.
   SN = SN + 1.
   ITAB1-SNO = SN.
   ITCC-SNO = SN.
    ITAB1-ENO = PERNR-PERNR.
    ITAB1-NAM = PERNR-ENAME.
ELSE.
    REJECT.
ENDIF.
RP-INIT-BUFFER.
RP-SEL-CALC.
CALL FUNCTION 'RP_EVALUATION_PERIODS'
    EXPORTING
      LAST_CALCULATED_DAY = P0003-ABRDT
      LAST_DAY_IN_PERIOD = TO_DT
      RETROCALCULATED_DAY = RP-SEL-CALC-RRDAT
    TABLES
      DIR                 = RGDIR
      EVP                 = EVP
    EXCEPTIONS
      RGDIR_EMPTY         = 1
      INTERNAL_ERROR      = 2
      OTHERS              = 3.
DESCRIBE TABLE EVP LINES LIN.
IF LIN > 0.
    LOOP AT EVP.
      IF EVP-IAPER = TO_P AND EVP-PAPER = TO_P.
        RX-KEY-PERNR = PERNR-PERNR.
        UNPACK EVP-SEQNR TO RX-KEY-SEQNO.
        RP-IMP-C2-TN.
        READ TABLE BT INDEX 1.
        READ TABLE WPBP INDEX 1.
        READ TABLE TAX INDEX 1."CHANGES BY ANKITA
        ITAB1-BAC = BT-BANKN.
        ITAB1-BKEY = BT-BANKL .
        ITAB1-DEP = WPBP-KOSTL.
        ITAB1-BETRG = BT-BETRG."CHANGES BY ANKITA
        ITAB1-TAXID = TAX-TAXID."CHANGES BY ANKITA
        YEAR = VERSC-PAYDT+0(4) - 11.
        MONTH = VERSC-PAYDT+4(2).
        DAY = VERSC-PAYDT+6(2).
        CONCATENATE YEAR MONTH DAY INTO ITAB1-PDT.
       ITAB1-PDT = VERSC-PAYDT - 110000.
        ITCC-DEP = WPBP-KOSTL.
        LOOP AT RT WHERE LGART = '/559'.
          ITAB1-BTFR = RT-BETRG.
          ITCC-BTFR = RT-BETRG.
         IF EVP-SRTZA = 'P'.
           ITAB1-BTFR = ITAB1-BTFR - RT-BETRG.
         ELSE.
           ITAB1-BTFR = ITAB1-BTFR + RT-BETRG.
         ENDIF.
        ENDLOOP.
      ENDIF.
    ENDLOOP.
ENDIF.
APPEND: ITAB1, ITCC.
CLEAR: ITAB1, ITCC.
END-OF-SELECTION.
CONCATENATE 'Prepared By:' ` ` PREPBY INTO PREPBY.
CONCATENATE 'Approved By:' ` ` APROBY INTO APROBY.
IF R1 = 'X'.
    FORMAT COLOR 2.
    ULINE (127).
    NEW-LINE.
    WRITE: 2 'Sr No.', 10 'Emp Num', 27 'Name'.
    WRITE: 57 'Department'.
    WRITE: 72 ' Transfer Amount' RIGHT-JUSTIFIED.
    WRITE: 92 'Bank Key', 107 'Bank AC. Number'.
    WRITE:1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
    NEW-LINE.
    ULINE (127).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITAB1.
      SN = SY-TABIX.
      WRITE: 2 SN, 10 ITAB1-ENO, 27 ITAB1-NAM.
      WRITE: 57 ITAB1-DEP.
      WRITE: 72 ITAB1-BTFR.
      WRITE: 92 ITAB1-BKEY, 107 ITAB1-BAC.
      WRITE: 1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
      ULINE (127).
      NEW-LINE.
    ENDLOOP.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 PREPBY.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 APROBY.
ENDIF.
IF R2 = 'X'.
    LOOP AT ITCC.
      COLLECT ITCC INTO ITCOL.
    ENDLOOP.
    FORMAT COLOR 2.
    ULINE (44).
    NEW-LINE.
    WRITE:2 'Sr No.', 9 'Department'.
    WRITE: 27 'Transfer Amount ' RIGHT-JUSTIFIED.
    WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
    NEW-LINE.
    ULINE (44).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITCOL.
      SN = SY-TABIX.
      WRITE: 2 SN, 9 ITCOL-DEP, 27 ITCOL-BTFR.
      WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
      NEW-LINE.
      ULINE (44).
      NEW-LINE.
    ENDLOOP.
ENDIF.
IF R3 = 'X'.
    LOOP AT ITAB1.
      CLEAR: ITTF, P3, P11, P13, P6, V_BAC.
      LEN = STRLEN( ITAB1-BKEY ).
      IF LEN < 3.
        CONCATENATE ITAB1-BKEY '***' INTO P3.
      ELSE.
      LEN = LEN - 3.
        LEN = 3.
        P3 = ITAB1-BKEY+LEN(3).
      ENDIF.
      CLEAR LEN.
      V_BAC = ITAB1-BAC.
      REPLACE ALL OCCURRENCES OF '-' IN ITAB1-BAC WITH ''.
      CONDENSE ITAB1-BAC NO-GAPS.
      LEN = STRLEN( ITAB1-BAC )."if length of acc num > limit
      IF LEN > 11.
        IT_FAIL-EN = ITAB1-ENO.
        IT_FAIL-BA = V_BAC.
        APPEND IT_FAIL.
        CLEAR: IT_FAIL.
        CONTINUE.
      ENDIF.
      P11 = ITAB1-BAC.
      CONCATENATE P11 '***********' INTO P11.
above step is for putting '' in place of unfilled chars of P11.
      P13 = ITAB1-BTFR * 100.
      P6 = ITAB1-PDT+2(6).
      CONCATENATE ` ` P3 P11 BTC P13 P6 INTO STR.
      ITTF-ROW = STR.
      APPEND ITTF.
    ENDLOOP.
    IF ITTF[] IS NOT INITIAL.
      CONCATENATE FLN SY-DATUM SY-UZEIT '.txt' INTO FILEPATH.
      CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = FILEPATH
        FILETYPE                        = 'ASC'
     WRITE_FIELD_SEPARATOR           = 'X'
        TABLES
        DATA_TAB                        = ITTF
     OTHERS                          = 22
      SKIP 2.
      IF SY-SUBRC <> 0.
        WRITE:/ 'Unable to Download file at ', FILEPATH.
      ELSE.
        WRITE:/ 'File with following data downloaded at ', FILEPATH.
        NEW-LINE.
        SKIP 2.
        LOOP AT ITTF.
          WRITE:/ ITTF.
        ENDLOOP.
      ENDIF.
    ELSE.
      WRITE 'No Data, no file was downloaded'.
    ENDIF.
    IF IT_FAIL[] IS NOT INITIAL.
      SKIP 2.
      FORMAT COLOR 2.
      WRITE 'Acc. No. of following employees exceeded the length limit'.
      WRITE:/ 'So their entry was not created in the file'.
      SKIP 1.
      WRITE : 'Employee Number', 20 'Bank Acc. No.'.
      FORMAT COLOR OFF.
      LOOP AT IT_FAIL.
        NEW-LINE.
        WRITE : IT_FAIL-EN, 20 IT_FAIL-BA.
      ENDLOOP.
    ENDIF.
ENDIF.
IF R4 = 'X'."CHANGES BY ANKITA
    WRITE:/ 'ERROR LOG - BANK A/C NO. CONTAINS ALPHANUMERIC'.
    WRITE:/ 'EMPID' COLOR COL_POSITIVE,12 '|',15 'Receiving Bank Code' COLOR COL_POSITIVE,
                                                                  40 '|','Receiver A/C No' COLOR COL_POSITIVE.
    PERFORM EXTRACT_DATA.
    SKIP 2.
ENDIF."EOC
RP-READ-PAYROLL-DIR.
Edited by: ANKITA BHARDWAJ on Dec 9, 2009 10:36 AM

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Impact of the MRP module on Financial data

Hi,
I wanted to play around with the MRP module that comes along with SBO - mainly to check out the features SBO offers and to find out the ease of use. I plan to test out on the TEST system and not PRODUCTION (LIVE). The question I have is, since I have financial data also in SBO, I do not want any type of impact on this financial data. So I want to hear if anyone has faced any type of issues in financial module while working with MRP module. Also is there anything that I should be aware about?
Please help me understand the MRP better.
Thanks a lot in advance.
Manoj.

Hi Manoj...........
After running MRP report it creates only recomendations which includes no. of production orders and no. of purchase orders as per need. Once you execute anyof the production order it will perform the accounting activity like how it gets done during normal production order.
Regards,
Rahul

Work flow and tables related with ESS Travel Module

Hi Experts,
I am new for work flow. Presently I am working for SAP ESS / MSS Travel module. Can you please let me know the names of work flows and tables related with ESS Travel module.
Regards,
Gary

Hi Gary,
Check if this [thread1|Let us learn SAP ESS Travel] [thread2|Travel Management Tables] helps you.
Regards,
Saumya

CSS - 11506 - Adding New SSL Services on Single SSL Modules

Hi,
We are having one pair of CCS 11506 currently SSL services are running on slot4 with single SSL module.Now we are planning to add one more SSL application with different certificates & keys on different VIP.
Can we use the same slot4 for new application & using different certicates & keys on same SSL modules.Your reponse is appriecated

Hi Sean,
Thanks for replying back just want few clarifcations in configuration part.
1. If new vlan is given for new application then how to point routes to the new vlan as default routes to exisitng vlan is already present.
2. I've prepare sample config template with details steps & let us know will it work & if changes is required kindly let us know.
1.# ftp-record ssl_record 192.168.19.21 johndoe "abc123"
/home/johndoe
2.# copy ssl sftp ssl_record import rsacert.pem PEM "passwd123"
Connecting
Completed successfully
3.# copy ssl sftp ssl_record import rsakey.pem PEM "passwd123"
Connecting
Completed successfully
4.Enter configuration mode.
# config
(config) #
4. To use RSA public key exchange and authentication:
a. Associate the imported RSA certificate with a file.
(config) # ssl associate cert myrsacert1 rsacert.pem
b. Associate the imported RSA key pair with a file.
(config) # ssl associate rsakey myrsakey1 rsakey.pem
5. Compare the public key in the associated certificate with the public key
stored with the associated private key and verify that they are identical.
(config) # ssl verify myrsacert1 myrsakey1
Certificate mycert1 matches key mykey1
ssl associate rsakey NEWKEY newkey.pem
ssl associate cert NEWCERT newcert.pem
!************************* INTERFACE *************************
interface 3/3
description "****WEB SIDE****"
bridge vlan _ID_X.X.X.X
bridge port-fast enable
interface 3/4
bridge vlan_ID_Y.Y.Y.Y
bridge port-fast enable
description "****PIX SIDE****"
!************************** CIRCUIT **************************
circuit VLAN_ID_X
ip address A.A.A.A B.B.B.0
ip virtual-router 2 priority 101 preempt
ip redundant-interface 3 C.C.C.C
ip critical-service 3 chk-con-pix_Y.Y.Y.Y
ip critical-service 3 chk-con-web_X.X.X.X
circuit VLAN_ID_Y
ip address D.D.D.D E.E.E.0
ip virtual-router 4 priority 101 preempt
ip redundant-vip 4 F.F.F.F
ip critical-service 4 chk-con-pix_Y.Y.Y.Y
ip critical-service 4 chk-con-web_X.X.X.X
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list NEW
ssl-server 20
ssl-server 20 vip address F.F.F.F
ssl-server 20 cipher rsa-with-rc4-128-sha F.F.F.F 81
ssl-server 20 cipher rsa-with-rc4-128-md5 F.F.F.F 81
ssl-server 20 rsacert NEWCERT
ssl-server 20 rsakey NEWKEY
active
!************************** SERVICE **************************
service FRONT_SSL
type ssl-accel
slot 4
keepalive type none
add ssl-proxy-list NEW
active
service WEBSERVER-03
ip address G.G.G.G
redundant-index 3
protocol tcp
port 80
active
service WEBSERVER-04
ip address H.H.H.H
redundant-index 4
protocol tcp
port 80
active
service chk-con-pix_Y.Y.Y.Y
keepalive type script ap-kal-pinglist "N.N.N.N"
ip address J.J.J.J
keepalive frequency 2
keepalive maxfailure 2
keepalive retryperiod 2
active
service chk-con-web_X
ip address K.K.K.K
keepalive type script ap-kal-pinglist "P.P.P.P"
keepalive frequency 2
keepalive maxfailure 2
keepalive retryperiod 2
active
!*************************** OWNER ***************************
owner NEW
content BACKNEW_HTTP
vip address F.F.F.F
add service WEBSERVER-03
add service WEBSERVER-04
protocol tcp
port 81
url "/*"
redundant-index 5
no persistent
active
content FRONTENDNEW_SSL
vip address F.F.F.F
protocol tcp
port 443
application ssl
add service FRONT_SSL
active
content NEW
url "//www.ABC.com/*"
vip address F.F.F.F
protocol tcp
port 80
redundant-index 4
redirect "https://ABC.com"
active
your reply on this would be highly appericated.

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Nexus 7010 with F3 line modules. The modules are not "powering on" ?

Hi,
Just tried installing a new Nexus 7010, With a couple of F3 line modules.
I cant seem to figure out how to get them to come online.
They flash with red LED and from a "show module" they show as powered down.
Its a fresh nexus install, What could I be missing here? Do I need to "provision them somehow?
Thanks
L

Hi,
Its 6. something ( Im not in front of it right now )
And im certain its these ones.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/datasheet-c78-730273.html
They are 48 port , 1/10G fiber. with "8 port groups.."
No idea if this helps at all.
Its a new install,
It contains the default VDC and an admin user. No other config has been done.

Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

anas guellaf wrote:
it still make 3 bips before starting the IMAC.
That is another problem not related to the Mac OS X version you are trying to use.
Three beeps at startup means you have a bad ram module in the computer. Did you install the ram or did it come from another owner this way? The first problem you need to solve is the bad ram.
When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory? If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
On the bottom of the screen there should be a small door that you can remove with a small screw driver. You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules. You can then put two in (if it has four) and see if it starts without the beeps. Do that with each module so you find out which is bad. Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours. So, you need to talk to Apple and have them send the DVD for your particular iMac.

Need help with SAP SD module

Hi i am new to this forum, i need help with SAP SD module. Can you please provide me pointers or links to get started SAP SD module and start facing the interviews.

Hi Aditya,
For understanding the SD module itself, the link - http://help.sap.com/saphelp_erp2005/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm is the ultimate one.
Again you can also refer to the mateial "Implementing R/3 S&D BY GLYNN C.WILLIAMS".
For Cracking interview, You can refer to "SAP SD Interview Questions, Answers, and Explanations By: Jim Stewart" which is available in the market.
Regards,
SARTHAK

New GL impact with MM/PP Module

Similar Messages

Maybe you are looking for