New GPU cooler

Rather than trash an old MSI GeForce4 Ti 4200 card that is noisy (heat sink and fan vibrates) I want to stick a third party cooler on there.
Has anyone tried this? I don't plan on overclocking it. I know that Thermaltake and Vantec both make coolers for the GF4 series but don't know if they will fit.
Thanks.

I also used a Thermaltake on my old MSI GeForce Ti-4600 8x, and they
work great, plus their made of pure copper, which in turn has an excellent
transfer of thermal properties!
The H2O Guru
If You Build The Circuit The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Drivers v3.13
nVidia VGA Drivers v53.03

Similar Messages

Need new GPU cooling module for Qosmio G20

Does anyone know where I can get a new fan for the GeForceGo 6600 graphics on my qosmio G20?

Why do you need a new cooling module?
How ever, I agree with Jaba, an ASP will help you and change the cooling module. You will find an ASP on this website => Support & Download => Find an autohorised service provider.
Regards

Need to remount the GPU cooler?

Sup homies
I bought a new GPU cooler for my 9800 PRO and it fits great, but I'm not able to get as good of results out of it as I though I might be able to achieve.
What kind of compound/grease do you think I should use? My GPU cooler is all copper and lapped to a MIRROR finish.
That also leads to my next question, I might have applied too much. How much do you all think I should apply?

No problem Generally for O/C You can use PowerStrip - with all VPU but this program has non auto-overclocking system http://www.entechtaiwan.net/files/pstrip.exe or embedded in nVidia drivers o/c system. Just change speeds carefully and slowly and make tests to check stability. GreetZ

NEW GpU

Hey Guys, Was planning on buying a new GPU unit specifically a 256 mb 7600gt by ASUS. I just wanna know whether it would be compatible with my PC since i Don't really know how to add up my power ratings. Was reading in the forums that the K8N Ne04 Plat has a lot of compatibility issues with graphic cards so was wondering if this GPU is worth spending on. My specs are;
AMD 64 3200+ Venice
MSI K8N Neo4 Platinum
1 Gb(2*512mB) OCZ OCZ4001024PFDC-K
250Gb Seagate Sata HD
Antec True POwer 480Watts
Thanks again

Quote from: Grayone on 03-September-06, 02:44:43
Glad to help, even though my finger hit the wrong button.
same old excuse. put the cool-aid down and step away from the computer.
nismosiz, glad to hear you're sorted. asus makes great graphic cards and i never had problems with mine.

New GPU Quadro k5200 installed and having problem with my AE, PPro CS6 not using the GPUs cuda.

Hi guys, I recently bought a workstation from BOXX tech with a new GPU Quadro k5200 installed in it.
I am having problem with my AE, PPro CS6 using the GPUs cuda.
I went to Nvidia Settings and use the specific App to select it to use GPU n- Quadro k5200. But still not working.
Please help

If you edited the Cudatextfile in the Adobe Premiere CS6 directory correctly then the acceleration should be enabled. The only way it it's not is if you have the wrong driver for that version of Adobe or did not edit the text file with the exact name of the card. You can use the GPUsniffer in that same Premiere directoy with the command prompt to see the name the GPU should be listed as. The Ray Tracer file in AE has to be edited with the same listing.
Eric
ADK

Online Chat, March 30, What's New and Cool in NetBeans

Find out what's new and cool in NetBeans (such as the latest NetBeans IDE release, NetBeans IDE 3.6, and the follow-on release, NetBeans IDE 4.0) in an online chat with Ian Formanek, chief of technology for the NetBeans project at Sun Microsystems, and Sun senior product manager, Larry Baron. This is an opportunity to find out what's new in NetBeans, and also to get your NetBeans questions answered.
The chat is scheduled for Tuesday, March 30, at 11 A.M.-to-noon Pacific time (6 P.M-7 P.M. GMT). To join the chat on March 30, go to http://java.sun.com/developer/community/chat/index.html and click on "Join the current session".

BTW, the chat starts at 11:00 A.M. PST (2:00 P.M. EST/19:00 UTC).

Skype crashes on startup after getting a new GPU

After I got my new GPU, a AMD Radeon R7 200 skype crashes a few seconds after I log in. It will always lag, and then completely freeze. I have found no solution to this. It used to work perfectly on my old GPU.

First update your Windows 7 installation to the latest Service Pack 1 (SP1) and make sure that you have the latest driver updates available too. http://windows.microsoft.com/en-us/windows7/install-windows-7-service-pack-1 Also, update your Internet Explorer to the latest IE11 version for Windows 7. http://www.microsoft.com/en-us/download/internet-explorer-11-for-windows-7-details.aspx

Skype Freezing PC Competely Ever Since Installing A New GPU

For some reason when ever skype is running, as soon as it starts up, my pc ends up freezing completely. this started to happen ever since i installed a new gpu Pc SpecsAmd Athlon II X4 645Ati Radeon hd 54504gb Ram300w psu

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

New GPU compatibility

I've got an HPE h8-1070t and I want to put an EVGA 750ti in. I've got an EVGA 600B PSU. Everything else in the case is from the original PC. I've tried a few times to put the new gpu in and I always get a few beeps spread out by maybe 5 sec each and then 4-5 beeps in quick succession. Before the beeps the computer stays at the boot screen and I can't press esc/F10 etc. any help would be great!

With the original video card installed, power up the PC and enter the BIOS. In the security tab go to Slot Security and disable security on the PCI Express x16 Slot 1. Don't forget to save the change before exiting BIOS. Once that is done, remove the original video card and install the new card in the PCI Express x16 Slot 1 and power it up.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Acer Aspire m3985 new GPU cant boot, MBO see only half RAM memory

Hi i have a lot of problems with Acer aspire m3985.Default PS is 300w, i upgrade it to coolermaster 500wi put new GPU povercolor r7 260x 1GB ddr5 128 bit, but cant boot pc (black screen and not hear beep from motherboard)i put another GPU ATi 5700 (same spec like prev. GPU) and system boot normal, i hear 1 beep, and work fine...I put again new GPU r7 260x, but again cant boot (gpu is new and work on another PC i tested it)so i try CLEAR CMOS, i finish thatr7 260x card dont boot again, i put ati again, and make date and time in BIOS, but i see another problem now:i have 16 GB paired kingston memory on computer but in BIOS see 8GB ???? (before reset CMOS is 16 GB)I test all memory modules one by one, i tested any slot one by one and all work, but when i put all 4 modules, bios and windows see only half 8gb see from 16 gb installed memory...In program CPUz , write 16 GB ram, and 4 modules installed, with serial numbers on modules, but in bios and windows see only 8 GB of ram...I reinstall system 3 times, windows 7 - nothing getinstall windows 8.1 - nothing getIn wondows 8.1 i upgrade BIOS from site p01.a1 to p01-a2 because last bios cant upgrade i got error message"ROM file size does not match existing BIOS size"I try upgrade UEFI firmware, i read manual on this forum, i work all step by step, and in my windows DONT HAVE OPTION UEFI firmware???also i try windows 10, all same nothing fixed, memory 8 gb, r7 GPU dont work...I remove battery from MB for 10 hours to empty electrolits, but again nothing get...On motherboard next JUMPER near CMOS is BIOS WP jumper (i read on forum this jumper is BIOS write protect jumper) i dont touch this jumper, because i dont know for what is use... (i think i need put in ON bios wp jumper and then upgrade bios, but i first ask what to doo and i hope i get anwser)...Please help me

1. In BIOS have 16 gb ram, windows see 16 gb ram, motherboard name acer m3985 in bios and windows, GPU r7 260x dont boot PC2. I reset CMOS, BIOS see 8 gb ram, windows see 8 gb ram, CPUz and hwinfo see 16 gb ram, GPU r7 260x dont boot again, motherboard name in bios and windows is changed to acer m1935.3. I download last version bios p11.b1 from site, windows flash faild ROM size doesnt match bios size4. i donwload bios p11.a2 from acer site, windows flash, load default settings in bios, bios version p01.a2 write in bios page, motherboar name is m1935 (my pc is m3985), GPU r7 260x cant boot, 8 gb ram see in bios and windows...5. i try install windows in UEFI mode, format SSD to GPT format (someone told me that is wrong need make bootabile USB with windows because CD-DVD rom is not UEFI- in bios i see boot name : UEFI CD DVD drive and i boot from them, boot in windows 8.1 options option in settings UEFI firmware dont exist...6. can someone give me step by step manual how to flash bios in DOS mode, i have USB flash, and i format it in bootabile mode, and wish bios i put on usb last one UEFI (non working) or p01-a2???12 days i cant use PC because i cant solve this problems

P67a gd55 problem with a new gpu

Hi!
I just upgraded to an hd7970. Now I don't get any signal at all to my screen. Not even bios is loading. I've made sure everything is properly in place and connected on 8-pin and one 6-pin pci-express cable. When I plug in old gpu it works again. When I plug in the new card the fans start as usual at startup. I got a thermaltake tough power 750w psu. I've tried to rule it out to three things that can be wrong.
1. Gpu was dead on arrival.
2. My psu is too weak to fully drive the new gpu.
3. My motherboard won't recognize the new gpu.
I recently had problems with trying to flash bios with live update and had to flash back to version 1c.

Quote from: badboy2k on 15-December-12, 20:57:09
ok your psu has 4 +12V rails (+12v1 = 18A, +12v2 = 18A, +12v3 = 18A, +12v4 = 18A) meaning its very spread out!
only thing i can really suggest you do is see if a friend with a relativly good computer will let you try it in ther rig if they have a 600W or better psu in it to see if it works there!
even very old bios versions should see it unless your card is flashed with a GOP VBIOS for use with windows 8 but they usually state that on the box!
Okay, so if i used one of the original PCI-e and one through molex it should have been as good as it gets from my PSU?
This is a thread i started a while ago and got help with flashing back my Motherboard. Maybe it will give you some clues to what is wrong if it's not the PSU.
https://forum-en.msi.com/index.php?topic=164109.0

Question about Northbridge of P965 Platinum (Holes or springs for new NB cooler)

If anybody know if the Northbridge on the P965 Platinum have holes or spring for the heatsink.
I want to install a new NB cooler. So i was wondering if the NB was mounted with screws or springs.
It would be nice if i did´nt had to take out the hole board again. That means if i could use the spring
My new cooler have both systems. Its just a matter of what i can use with the board.
Thx

Hi Maesus
Here is the 2 NB coolers i have.
Either the Extreme Spirit II from Thermaltake or the NorthQ NQ-3880
http://www.northq.com/products/gfx/nq3880.html
http://www.thermaltake.com/product/Cooler/VGAnCHIPnMEM/cl-c0034/cl-c0034.asp
They both have installing system for either Holes or Springs (Anchor clips). But it would be easyst with springs
because then i dont have to take out the MOBO to install the back plate.
But i cant see it right on the picture you gave if it have holes trough the MOBO or just springs
Thx buddy

LR CC - Does new GPU usage work with multiple GPUs?

Hello,
I have two nVidia graphics cards (3 GB memory each) in an SLI configuration. In the spirit of getting something cool and asking for even more, I'm wondering if the new performance feature in LR CC can take advantage of both cards. For the "Use Graphics Processor" option, only one card is listed.
Thanks,
~Steve

Thank you Sandeep. I guess I didn't expect that to be available so quickly.
In case anyone else asks this question, the answer is . . .
Additional Information
The Develop module is the only module that currently leverages the GPU. Processes outside the Develop module are not currently GPU accellerated. For example, the process of merging multiple images to create HDR files or panoramas does not leverage the GPU.
Only the "Main" Lightroom window is accelerated. The "Secondary" window is not accelerated by the GPU.
Leveraging more than one GPU at this time is not currently supported.

New GPU for 2011?

What do you guys think Lenovo will do for the GPU in the new T series for next year? (I bet they go back to ATI and go for the 5000 series)
Thinkpad T500 - Intel Core2 P8400 (2.26GHz), 4 gigs of ram, 160GB/7200rpm hard drive, ATI 3650 GPU, WSXGA+ panel

usually you would get an idea what sort of GPU will be in it, as HP or Dell could be releasing their new models closer to Christmas. Lenovo would do so within few months of that.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

IOH temps higher after new CPU cooler on my X58 Pro

Hi
I have a X58 Pro with 12GB OCZ Platinum 1333 RAM + i7 920 + Antec EA500W. The stock cooler was making too much noise so I installed a new Thermaltake ISG 300 cooler. My IOH temps jumped from 57 to 82C on idle. I have an Antec Solo case which should have good airflow. Nothing else changed ....
thanks
-D

I have seen other boards with similar big coolers (albeit from other companies like Zalman) but the IOH wasnt this hot. I will definitely try the Spotcool and see if that works. My goal was to simply get rid of the loud noise of the stock cooler.
Quote from: Henry on 01-December-09, 11:35:59
Looking at other manufacturers X58 boards those heat sinks don't appear to be much different so how is it that MSI is the only one you need to feel that way. You make a modification then you need to think about the other things that mod may have an effect on. There are other coolers that would have done the job without affecting designed airflow by much if any. If you change the designed airflow characteristics then you must compensate for that. In that case an Antec Spotcool would do it.

New GPU cooler

Similar Messages

Maybe you are looking for