New hard disk full when is not

Hi. I have a Mac 10.4.11. Two years ago the original hard drive died so I took it to the computer store and replaced it with a new and larger hard drive. It's working great.
When I go to disk utility, it says
CAPACITY 297.8
AVAILABLE 219.2
USED 78.2
so why do I get the msg that the hard drive is full. Is there anything that I can do to fix this?
Thanks!

Sorry for my late answer.
Your previous post: Disc Utility to erase free space bring nothing : the free space is free. You should verify your disc to see if there is some problem in the file system.
From your second post I understand that you can try to delete some files. Have you already emptied the basket or you do not empty it from time to time ? There could be a lot of stuff.
Also some Apps have theyr own basket or a place to keep deleted data like mail.
Check if you have duplicates and if you can delete something or move something to an externald Disc.
Best solution whould be to change again the Startup disc with a bigger one.

Similar Messages

New hard disk not detected when plugged into SUN FIRE X4150

Hi
We have a server currently set up as RAID-1. There's a need to have additional space for operational needs so an additional 300GB hard disk was acquired and need not be in RAID-1 setup. It was plugged into the server and the server seems to hang i.e. remote sessions terminated, cannot be ping.
Server was powered down, and after removing the hard disk, powered up. Everything is ok again.
We then powered down the server, plugged in the hard disk, and powered it up. Server boot up into the OS ok but the new hard disk did not get detected.
My questions are:-
1. Is it possible to add a 3rd hard disk in a RAID-1 server?
2. If yes, what are we doing wrong or missed?
3. If it not possible, does it mean in a RAID-1 setup, any additional hard disk to be added MUST also be RAID-1 configured?

Hi.
This server can be ordered with LSI RAID controller or with Adaptec RAID controller.
They are required different steps for configure disks.
Adaptec RAID controller require first create volume at BIOS level RAID configuration menu.
http://docs.oracle.com/cd/E19121-01/sf.x4150/index.html
Regards.

NEED HELP, old hard disk failed, new hard disk not detected.

My hard disk died, not working, not detected when I restart with the MacOS X DVD and attempt to reinstall.
I have bought a new hard drive, 160 GB ATA - IDE Samsung drive, and carefully replaced it following service manual instructions. All connectors have been carfully but firmly reconnected, and the new hard disk is not detected.
What can i do?? where is the problem??
Thank you very much for your help.

Do you know that the new hard drive is working? As it's new chances are it is, just asking .... do you know it's powering up? If you replug the old not working hard drive in, is it recognized? (this is where you don't put the computer back together, but just replace the hard drive and sort of close it back up, but don't use any bolts close the case). Plus you can feel or clearly hear if the drive is starting up or not.

MBP 17" mid 2010 Snow Leopard Native: why not possible to install Snow Leopard in some new Hard disk?It appears "impossibile 'cause you have Mac OS X" 23.1.1."

Guys, I want to install SL in some hard disk. It's the native OS, the one came with the MBP. But after having installed Lion, my MBP doesn't allow me to install from the original dvd of Snow Leopard, telling me "impossible because you have Mac OS X” 23.1.1. istaller".
Someone can help me?

hey thank you for your answers. I've written that I want to install snow leopard in a new hard disk, not over the lion. In other words, I want a hard disk with the faster snow leopard, that was the native OSX of my MBP mid 2010. But using the last procedure you suggested me, the dvd doesn't appear. I repeat, there's something changed in the firmware that blocks snow leopard.
the comunication that appears when I insert the original dvd of SL is something like "impossible to install snow leopard because you have Mac OS X” 23.1.1. istaller".

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

Hi there ricalimo,
I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

New hard disk not detected on openboot

hello guys,
would like to request help if there are any settings i need to enable for a netra t1 to detect the new hard disks that were added on a dell disk array. the netra t1 is able to detect scsi hds 1-3 but not the 8-11. have checked netra t1 manual and it says that it supports both narrow and wide scsi. probe scsi only shows the following disks:
/pci@1f,0/pci@1,1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST318404LSUN18G 8590
Target 1
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 2
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 3
Unit 0 Disk SEAGATE ST318406LC 8A03
the new disks are of the same model. any help is greatly appreciated.

Hello,
the netra t1 is able to detect scsi hds 1-3 but not the 8-11.
/pci@1f,0/pci@1,1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST318404LSUN18G 8590
Target 1
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 2
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 3
Unit 0 Disk SEAGATE ST318406LC 8A03
This is an incomplete output of probe-scsi. Which of these disks are internal (maybe only ID 0?) ?
Set auto-boot? to FALSE at the ok-prompt. Temporarily insert one of the new disks in the slot of one of the detected disks (e.g. ID3). Is the disk now detected at the OBP ? If it is, there is something wrong with the external chassis.
I assumed that this is a Netra T1 AC200/DC200 with only a single channel SCSI controller.
Michael

Pxie 8108 does not boot with new hard disk

Hi
I'm currently using PXIe 8108 with PXIe-1062Q.
The previous hard disk was borken so I had to install a new hard disk.
The new hard disk is fommatted as NTFS format, and it is currently mounted on 8108.
Unfortunately I don't have recovery disk avaialble so I'm trying to install Windows 7 on empty hard disk.
When you boot, the PWK OK LED light is on all the time, DRIVE orange LED is on for few seconds only when I turn the switch on.
Labview RT switches are all off, I cleared CMOS many times from the board but, the screen shows nothing.
I have tried use my DVI monitor with other device as well, and it worked so there is no problem with the monitor.
In addition, I tried to go to window safe mode by pressing F8 or Del it didn't work, so I see nothing on the screen when its booted up.
I tried to put as much information I can it will be very appreciated if you can help me with this issue please.

You said you can't get into Windows safe mode, have you installed Windows on the hard drive? Are you able to get into the BIOS for the controller?
If you aren't able to access the BIOS for the controller, it may be due to bad RAM. If you are comfortable installing RAM and you have some extra laptop RAM of the same type (I think it's DDR3 for your controller) laying around, you can try swapping out the RAM.
Was your hard drive damaged through some event, or did it just stop working?
AC - LV Solver

Recurring Hard Disk Error - New Hard Disk

I've been in contact with HP about a recurring problem with my Pavillion g6 - it periodically has blue screen errors and then won't turn on, displaying a "hard disk error". It then refuses to boot up for anywhere between a few minutes to a few days. I sent it in for a repair, it came back with a new display bezel (???). More hard disk errors. I called in and they shipped out a new hard drive for me.
Today I installed the new hard drive. When I tried to boot it up for the first time, I was greeted with yet another hard disk error. I ran a test, it claimed that the hard disk was fine (it used to say that before sometimes too, which is probably why they didn't replace it initially). Powered down, and turned it on again - it started up fine.
Now it is working, but I don't feel any better about it since it had that initial error. Is it normal for a new hard disk to fail right after being hooked up? It was obviously installed fine, as I am typing this post on a fully functioning laptop now. I am tired of living out of a portable drive (it is a lot like living out of a suitcase), so I would appreciate some assurance that the laptop isn't just going to crash again, but it seems to me that the new hard disk isn't going to be my solution.
I have an extended warranty - but I don't have the luxury of time when it comes to mailing it in, as I am a full-time student and use online courseware every day.
This question was solved.
View Solution.

It is obviously not normal to get an error on a new hard drive. Equally obviously, it is not the drive itself. I wish I could calm your fears but I suspect you have some sort of an intermittent connectivity problem with the SATA port on the motherboard. All you can do is keep using it and see if the problem comes back. I might go in and triple check all the screws and connections, but that is just OCD, really.

Rendered Standard previews, Hard disk full

Hello,
I'm using Lightroom 4.0 on Mac OS 10.7.3 and used the "Render Standard-Sized Previews" option to generate previews overnight. I had about 30 gigabytes of free space and woke up to find my hard disk full.
Since restarting, discarding the *1:1* previews and purging the ACR cache, I have about 10 gigabytes free, but it seems like ~20GB or so is being consumed with previews.
My "Lightroom 4 catalog Previews.lrdata" package is only 3.53GB.
Is there somewhere I can look for additional rendered preview files to delete them?
Thanks!

You may have a corrupted disk but you do not have a virus. Boot using your original system installation DVD and run Disk Utility. Repair the disk.
If you have no Administrator accounts at all, follow this procedure to create a new, temporary Administrator account from which you can fix your normal one.
Power on or restart your Mac.
At the chime or grey screen, hold ⌘ and S on your keyboard to enter single-user mode.
At the prompt, type
fsck -fy
and press Return.
This is a simple check for file system integrity and is optional. It will take a moment or two to complete. Wait for it to finish before proceeding.
Type the following exactly as written, one line at a time, each line followed by the return key. There is a single space preceding the first "slash" ( / ) character in each line:
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
When you restart the machine, it will take you through the entire setup and registration process all over again. When you do so, create a brand new account with Admin privileges. Give it a simple and disposable name since you will delete it later. Do not choose the option to transfer or migrate information to the Mac.
When it completes, log in under that new account, change your previous account back to Admin, and log out.
Log in using your old account, which will now have its Admin privileges restored. Delete the throwaway account you just created.

New hard disk after time machine restore doesn't boot, NEED HELP

Hi,
I just bought a new hard disk for my computer and it works fine if you just install the OS X, but every time I do a restore from my time machine I received a screen after the boot that tells the following:
"You need to restart your computer, hold on the power button until it turns off, then press the power button again."
This message appears in many languages, I do the restart and the same message comes again every time.
I already tried the disk utility when I boot with the OS X DVD and says that the disk is ok. I also tried a PRAM reset.
The result is the same message.
Does any body knows what I am doing wrong or why is this happens?
thanks for any help

This is a kernel panic. They are often, but not exclusively, hardware related. Some reading for you:
http://support.apple.com/kb/HT1392
http://www.thexlab.com/faqs/kernelpanics.html
If this only happens after a full restore from TM, that might suggest something you are copying back over is causing the problem. You may want to ask in the Snow Leopard TM forums about how to identify the culprit, or do a partial restore that might skip the system files likely to cause a panic:
http://discussions.apple.com/forum.jspa?forumID=1342
Good luck!

New hard disk, problems installing Leopard

Hi,
I bought a new hard disk (500GB SATA, 2.5-inch, 5400RPM) and fitted it into my 2008 unibody MacBook. I have a retail copy of Leopard. After inserting the DVD, holding down C and powering up, I get a chime, a grey screen, and then a blank screen. Then I get another chime and a grey screen. This keeps repeating with no option to install leopard.
I have tried resetting PRAM but this didn't help.
Any ideas?

Hi louse101,
There is additional Info HERE.
If you call Apple Customer Supoort 0845 600 1683 and provide the serial number of the MacBook you may be able to purchase replacement original system discs.
They will be for the version of OS that was pre-installed when manufactured and will contain the bundled software that is not included in a Full Retail Version of a newer OS X. The Apple Hardware Test specific to the Mac model will also be included.
ali b

K7T266 Pro2 & new hard disk

Hi
I have just upgraded my K7T266 Pro2 with a 2400+ chip (with modification & bios) and upgraded RAM to 1 GB. All works OK.
Now I am trying to put in a new 250 GB Western Digital hard disk and installing Windows XP Pro from scratch and I am running into problems. The hard disk is on the main IDE connectors.
The BIOS recognises the hard disk. When installing Windows XP, it seems to only detect a 131 GB disk!. Windows installs but when the computer reboots as part of the installation, the hard disk will not boot, even when forced as the fist boot device.
If I boot from the Windows CD and go through the install again same problem.
Any suggestions?
Chris
Adelaide
Australia

harrisc:
You mentioned that you updated the BIOS - the last release (1.9) had a note that it "Support Maxtor 160GB HDD (4G160J8)" so I would expect the board to support the 250 Gb WD drive, as well.
The problem probably is in Windows - XP versions before SP1 did not support 48 bit LBA (Logical Block Addressing) which is needed for drives larger than 131 Gb to be recognized.
Here is a link to the Microsoft Knowledge Base article with a 'fix':
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q303013
If your installation disk is a pre SP1 then that's the problem; if it's SP1 or SP2 then there IS a BIOS limit (contrary to what I assumed above). Your best bet then is to partition the drive with a ~50 Gb primary and 200 Gb extended partition and live with two logical drives.
Good luck,
ss

The storage where the virtual hard disk is located does not support virtual disk sharing

Hi everyone,
I deployed 2 hyper v vitual machines a while ago, and i did that because I needed to test my current game Project, which is an
online game. However, i've had some problems with my Windows installation then I had to reset the pc by making it a refresh
install. I still have the hyper v virtual disks, but i cannot attach it to a new hyper-v virtual machine. it pops up this message:
"the storage
where the virtual hard disk is located does not support virtual disk sharing". I dont know anything about virtual machines, so I
didnt know I had to make the disk sharable. How can I force to attach the hard disk to a new hyper-v? I dont want to go t
hrough the whole proccess of installing the operating system all over again and updating it....
Any help is greatly appreciated!
Thanks in advance,
Romulo Romero

Hi MrDebugging,
>>
When I Try to add a SCSI Controller, and then I click browse to add a UNC I get this:
C:\Users\Public\Documents\Hyper-V\Virtual hard disks\ClienMachine.vhdx
but I tried placing in different location, and the same problem occurs!
By the way, Im not on a server , I am a domestic user and I am running it on my
Windows 8.1
According to the error message , it seems that it is not a permission issue .
The VM is Gen 1 or Gen2 ?
Generally the error message occurs when you enable "shared vhdx" on standalone/client hyper-v host :
Please try to attach the VHDx file to IDE controller if it is a Gen 1 virtual machine (because only the SCSI controller has the option "virtual hard disk sharing" and Gen 1 VM only can boot from IDE )
All in all , please do not use this feature without CSV or Scale-Out File Server with SMB 3.0 on file-based storage .
If it is not the case , please detail steps what you did .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

System seems slower after new hard disk installation.

Dear all:
After a recent hard disk crash that caused me to lose a lot of important professional and personal information I replaced my old defective hard disk (a Seagate Barracuda 1.0 TB internal SATA drive) with a new one (a Seagate Barracuda 1.5 TB internal SATA drive).
The issue I am now experiencing may or may not be related to the new drive but I wanted to post it here and have your opinions about it. It seems to me that since this new hard disk was installed that my system is slower than it was before. Something else I noticed is that iTunes seems to hang every once in a little while, freezing and a while later resuming its operation (as if it were frozen while trying to read the information from its library located on the new hard disk ???).
Since the capacity of the new disk has increased some 50% compared to the older one, could this be the issue ? Can the fact that the 1.5 TB hard disk are new technology be a reason why this is happening (some issues still not completely resolved) or could it be that the capacity being so much greater requires the drive to work harder at finding the data ?
In case the information is relevant the drive's speed is 7200 rpm but I couldn't find any information (including Seagate's own web site) about its seek time spec.
Something else I noticed is that since I've installed the two 1.5 TB internal drives the fans inside my G5 have become more noticeable, raising their speed to a noisy level every now and then depending on what I am doing with my computer. This didn't happened before when I had only one internal hard disk installed (my original purchase configuration) and when I had (2) internal 400 GB hard disks installed.
Any ideas ?
Thank you in advance.
Joseph Chamberlain

Turns out I used screws that were too long above the optical drive which blocked it...

Rebuilding a T42 with a new hard disk

Hi folks, 1st post!
I have a T42 (Type 2373-WAS) that I bought from an asset management company a couple of years ago. The original 40GB hard drive is dying so I have bought a larger one to replace it.
When I bought the machine it didn't come with any build CDs, but had the IBM Access stuff on it with a separate partition for restoring - obviously this isn't on the new hard disk.
What I would like is to have the same structure on the new hard disk - with all the IBM recovery stuff and the extra partition. Is this possible? If so, how?
I suspect what I will have to do is reinstall XP Pro from my other CD, use the serial from the Windows sticker on the bottom of the laptop (hopefully that will work), and download the hundreds of drivers from the lenovo website? I don't really relish doing this, especially as I have read several accounts of people having issues with the wireless card driver...
What's the best solution to this?
Also - how can I find out *exactly* what the spec of my machine (2373-WAS) is?
Thanks in advance!

If you want the recovery partition you would need the Recovery discs, which you can try to purchase through ebay or marketplace on forum.thinkpads.com (you should post a Want to Buy listing the item that you are interested in purchasing).
If that don't work then, you would need to install the aftermarket OS and install the drivers separately.
Your machine spec and all the relevant drivers can be found in the link below.
http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=2373WAS
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

New hard disk full when is not

Similar Messages

Maybe you are looking for