New hard disk not detected when plugged into SUN FIRE X4150

Hi
We have a server currently set up as RAID-1. There's a need to have additional space for operational needs so an additional 300GB hard disk was acquired and need not be in RAID-1 setup. It was plugged into the server and the server seems to hang i.e. remote sessions terminated, cannot be ping.
Server was powered down, and after removing the hard disk, powered up. Everything is ok again.
We then powered down the server, plugged in the hard disk, and powered it up. Server boot up into the OS ok but the new hard disk did not get detected.
My questions are:-
1. Is it possible to add a 3rd hard disk in a RAID-1 server?
2. If yes, what are we doing wrong or missed?
3. If it not possible, does it mean in a RAID-1 setup, any additional hard disk to be added MUST also be RAID-1 configured?

Hi.
This server can be ordered with LSI RAID controller or with Adaptec RAID controller.
They are required different steps for configure disks.
Adaptec RAID controller require first create volume at BIOS level RAID configuration menu.
http://docs.oracle.com/cd/E19121-01/sf.x4150/index.html
Regards.

Similar Messages

NEED HELP, old hard disk failed, new hard disk not detected.

My hard disk died, not working, not detected when I restart with the MacOS X DVD and attempt to reinstall.
I have bought a new hard drive, 160 GB ATA - IDE Samsung drive, and carefully replaced it following service manual instructions. All connectors have been carfully but firmly reconnected, and the new hard disk is not detected.
What can i do?? where is the problem??
Thank you very much for your help.

Do you know that the new hard drive is working? As it's new chances are it is, just asking .... do you know it's powering up? If you replug the old not working hard drive in, is it recognized? (this is where you don't put the computer back together, but just replace the hard drive and sort of close it back up, but don't use any bolts close the case). Plus you can feel or clearly hear if the drive is starting up or not.

New hard disk not detected on openboot

hello guys,
would like to request help if there are any settings i need to enable for a netra t1 to detect the new hard disks that were added on a dell disk array. the netra t1 is able to detect scsi hds 1-3 but not the 8-11. have checked netra t1 manual and it says that it supports both narrow and wide scsi. probe scsi only shows the following disks:
/pci@1f,0/pci@1,1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST318404LSUN18G 8590
Target 1
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 2
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 3
Unit 0 Disk SEAGATE ST318406LC 8A03
the new disks are of the same model. any help is greatly appreciated.

Hello,
the netra t1 is able to detect scsi hds 1-3 but not the 8-11.
/pci@1f,0/pci@1,1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST318404LSUN18G 8590
Target 1
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 2
Unit 0 Disk SEAGATE ST318406LC 8A03
Target 3
Unit 0 Disk SEAGATE ST318406LC 8A03
This is an incomplete output of probe-scsi. Which of these disks are internal (maybe only ID 0?) ?
Set auto-boot? to FALSE at the ok-prompt. Temporarily insert one of the new disks in the slot of one of the detected disks (e.g. ID3). Is the disk now detected at the OBP ? If it is, there is something wrong with the external chassis.
I assumed that this is a Netra T1 AC200/DC200 with only a single channel SCSI controller.
Michael

Sony Smartwatch 2 - device not detected when plugging into laptop

Hi, When plugging my smartwatch 2 into my laptop I get that the USB device cannot be detected / no driver error and PC companion doesn't recognise it too. I know it's not a laptop issue as I connect my Xperia Z tablet and Z1 phone to it fine. Any help would be much appreciated. Gavin
Solved!
Go to Solution.

The SW2 isn't a device that will be detected as an external device being connected - Updates are done via an app update and apps are done via the phone - So you can't transfer files to it merely charge it via your Laptop
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

My new iPad mini will not charge when plugged into adapter. Any suggestions?

my new ipad mini will not charge when plugged into adapter. What should I try?

Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Compaq CQ40-337TU hard disk not detected/#10008-replace hard

i bought a laptop compaq cq40 a past year(2009). now i.m using window 7 enterprise.. the problem is my hard disk not detected.. i have done the start-up test thrugh bios. everythg going fine.. when i.m trying to do check for primary hard disk 1, it show that #10008-replace hard disk 1. what the problem?? n how i wan to solve the problem without changing the new hdd, ofkos without buy new one!!! if any one can help me??

it only means you need to replace your hard drive.but if cant replace it then there are some ways to revive your hard drive but it doesn't mean it will last. you can search it on google revive hard drive.

Lenovo z400 touch (hard disk not detected in boot)

Greetings And Salutations.Laptop Specification:Lenovo z400 touchWin8.1 SGL1TB hard disk I seem to have problem with my laptop not being able to boot operating system.Before all this occurred, I was casually browsing with chrome. Then I noticed a freeze as I was unable to move the mouse pointer, or even execute ctrl shift delete command. This happened after I acquired a blue screen. But it restarted fast into the lenovo white logo before I could make of the error code.Afte that, I was not able to boot into operating system I did bios setup but hard disk is not detected. Until now I am still stuck at not being able to boot my operating system due to hard disk not detected and not in boot menu option..Help anyone? (my probable guess is hardware malfunctioned?)

berayen wrote:
Greetings And Salutations.Laptop Specification:Lenovo z400 touchWin8.1 SGL1TB hard disk I seem to have problem with my laptop not being able to boot operating system.Before all this occurred, I was casually browsing with chrome. Then I noticed a freeze as I was unable to move the mouse pointer, or even execute ctrl shift delete command. This happened after I acquired a blue screen. But it restarted fast into the lenovo white logo before I could make of the error code.Afte that, I was not able to boot into operating system I did bios setup but hard disk is not detected. Until now I am still stuck at not being able to boot my operating system due to hard disk not detected and not in boot menu option..Help anyone? (my probable guess is hardware malfunctioned?) If the hdd is no longer detected in the bios then the possibility is that you have a crashed hdd and therefore need to replace it. Just to be sure, go to bios and set everything to default. Save and exit. See if you can now see the hdd in the bios.

Hard disk not detected during booting or also it does not show in boot menu.

hard disk not detected during booting or also it does not show in boot menu please tell

you may have a failed hard drive or bad cables, i would check first to see if the hard drive is powering on. if it doesn't try a different power connection, and if it still doesn't start spinning i would say that it is bad and get a new hard drive. If
it does start spinning and just isn't being recognized, try a different sata port if you have the option or a different sata cable all together.

IPhone will not charge when plugged into computer

My phone was not working, and so I took it to the apple store nearby. Here were the problems:
-error message saying "this device not made to work with iPhone"
-would not charge when plugged into computer OR wall charger
-person on other end of phone calls said i sounded really far away and had trouble hearing me
-when i shut it off, it restarts itself immediately
-cant do a manual reset holding the power and center buttons at same time
-when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
Is there any way they will replace my iphone at no charge?

Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

My ipad air cellular says it is not charging when plugged into wall socket but after a few hours it has charged but still says not charging

my ipad air cellular says it is not charging when plugged into wall socket but after a few hours it has charged but still says not charging
please help with this little annoying problem

for five weeks since i got it still doing it but it is charging so it is weird

Toshiba backup drive not recognized when plugged into thunderbolt display.

My Toshiba backup drive does not mount to my MacBookPro when plugged into my Thunderbolt Display. It works beautifully when plugged directly into my MBP, and other USB devices work beautifully when plugged into the same USB ports on the Thunderbolt Display.
All my equipment is pretty new. The Toshiba is currenlty configured to be my Time Machine back up drive.
Laptop: 15" Macbook Pro, 2.8 GHz Intel Core i7, 16 GB 100 MHz DDR3, Mac OS 10.8.5
Backup Drive: Toshiba 500GB Canvio® Basics USB 3.0 Portable Hard Drive
Apple Thunderbolt Display: 2560 x 1440, NVIDIA GeForce GT 650M 1024 MB graphics
When I plug the backup drive into the TB Display, usually nothing happens. The blue light on the drive doesn't come on, and it doesn't mount to the desktop. If I wiggle the USB back there, sometimes the blue light will come on, and sometimes it will mount for a minute then go away. This is true for all 3 USB ports. I have not had problems with any other USB devices, but the only other ones I've plugged into the Thunderbolt are my keyboard, bluetooth headset charger, and other items that probably use less power than the backup drive.

But the cable works when plugged into my laptop. Plus, the cable connection is pretty specific to the device; I'm not sure if you can buy another one seperately.

Hard disk not detected once, but now working?

Hi,
I'm Zak, a bit of techie when it comes to playing with software, or re-assembling computers and whatnot. Unfortunately I've got no clue about some other things.
A bit of quick history on my notebook: The fan has been making terrible noises the last few weeks. Initially I thought it was some dust so I got some duster. A lot of dust came out, so that can only be good, but the noises came back after a few days. After some searching I figured the other logical explanation was probably the hard drive going bad. I'm hesitant to send it back to HP because I use it for all my university work and it would really set me back a few weeks to not have it.
So, a few days ago, I booted up my notebook to a "hard drive not detected" - or very similar - message. There were a few options, for f1-f4, they were system information, and 3 different tests (I think). I ran the tests, each one came back fine, noting that there was no OS installed, or hard disk to boot from. I rebooted because I hadn't quite seen it boot up, and wanted to see if there were any other options. Turns out, it started up fine. I restarted once more and again, it did fine.
Next, I scrambled around, backing up all my data, getting together warranty info, installing the HP Support Assistant, etc. I ran all the tests from the Support Assistant and there were no problems detected. Since then I've just been hibernating the notebook when I stop using it, and I haven't encountered any unusual trouble. It all seems fine, but my warranty expires Dec 7th of this year. Is it safe for me to assume the "hard drive not detected" error was just a single misfire? I've read a lot of threads and FAQs on it and it doesn't sound like something that just happens once and goes away. On the other hand, I've never had to use a warranty so am unsure quite how the process works, and like I said, sending it anywhere would put me back in my work.
For the sake of a full post, I have an HP G62-367DX Notebook, running on Windows 7 64-bit OS, and as far as I know there were no changes made between the error and my prior boot. If there's any other information I can provide, just let me know.
Cheers, thank you very much for any assistance, and good day
This question was solved.
View Solution.

The tests from the Assistant are not as comprehensive or reliable as the full hard drive test in the BIOS....tap F10 as you power up, go in there and find the hard drive test. Run the long form test and see what is says. It is not unusual for hard drive issues to start as intermittent and gradually get more frequent. If your drive passes the long form test you can fairly safely assume it was a one-time gremlin of some sort, but it is still a real good idea to back up. I like the idea of the online backup services and I will name Carbonite only because it is well known and not as an endorsement. There are several more and an external drive is also a good idea.
You cannot put off a reboot forever; you are going to have to confront the issue at some point.

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

Camera not working when plugged into certain USB ports

I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
Thanks

Seems like it is a USB 2.0 or not problem
10:38 PM Saturday; August 23, 2008

Phone does not ring when plugged into external speakers

Is there a docking speaker that will allow the iPhone to ring for incoming calls when plugged into speaker listening to music?

Hi Alicia,
All of the iPhone compatible speakers listed here: http://store.apple.com/us/browse/home/shopiphone/iphoneaccessories/speakers?mco=MTU2NjIwMw should allow the iPhone to ring while in the dock.
You can also see a rating and reviews for each dock.
-Jason

New hard disk not detected when plugged into SUN FIRE X4150

Similar Messages

Maybe you are looking for