New Hard drive, adding artwork a pain...

Since yesterday I've been re-upping my library with my new hard drive.
Sometimes I try to drag a picture onto the artwork box where you fill out info for the album, and it doesn't stick the photo. Nothing happens. I try the same photo from a different site, nothing. Try a different album, nothing. Try rebooting iTunes, nothing....weird?
Also, is there a way to get the old browse window back? The one that drops from the top and sorts by album, genre, and artist? I like that one better than the side panel.

I just tried dragging a picture from a webpage and iTunes wouldn't take it. But after I dragged the picture to my desktop I was able to add it. Seems like a bug that needs fixing because it doesn't apply to all music. Some WILL take pics from the net, like I'm used to...

Similar Messages

Adding new hard drive for Flash recovery area

i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

Are you on Windows or Unix? And are you using ASM?
I'll assume you are on Windows....So after allocating the drive, you will format it say as F drive. Then you can create a directory T:\Flash. The parameter determining the location of the flash recovery area is db_recovery_file_dest. But you also need to set the size of the flash recovery area as well. After that's done. You can do your backups to Flash and see if the directory is populated.

My computer recently had a new hard drive installed. Now the music I have added to itunes won't sync over to my ipod

My computer recently had a new hard drive installed. Now the music that I have added to itunes won't sync over to my ipod. I have the selections checked, but still no luck.

See Recover your iTunes library from your iPod or iOS device.
tt2

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one? If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)? If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not... By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis. You probably should have just moved your whole iTunes folder. Still, moving the media folder as instructed should not have messed up the library. Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files? How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you. I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
If you are in the USA you can download some previous purhcases with iCloud, but not all.
Here's a bit on what an iTunes folder should look like:
What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
Once you get iTunes working off the external drive it should just put new media to the external when you add it.
I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

Moving Data from old hard drive to new hard drive

I'm posting this question in this category , I hope it's the right place. Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3. just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it. I hadn't been doing regular backups, so I want to save as much if not all of my data as I can. I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
Here's my plan:
l. Remove old hard drive from laptop
2. purchase new hard drive - I've been told any drive will work, it doesn't have to be designed for a Toshiba. I've been looking at best prices, etc. mainly Western Digital. I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
3. Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
4. Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive. Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
5. Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
6. This is the step I'm not sure what or how to do next. I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install. I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow. I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
I need further help and information about this last step...the critical data transfer method. There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file. Also, would it overwrite or interfere with the clean install on the new drive? I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer. I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer).
My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips. Thanks for any help asap...

Hi!
The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR. This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB). I was told not to go above 120 or I'd have partition problems.
The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead. If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system. Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
My big question now is: Will the Toshiba recovery disc actually reformat my new drive? Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install. I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc. That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do. Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running . (A Knoppix live CD boot disc didn't work either).
I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc. The disc does have drivers, etc. but the question is, are they able to install the OS. I was running XP3 when it crashed, so I know i would have to download that again. I just want to get the darned system back up and running with my new drive and restore disc. IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is.
So, that's where I'm at now! Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

Had to get new hard drive and need to reinstall iTunes

My very new PC went beserk and I had to get a new hard drive. Everything off the old drive is irretrievable. I have my iTunes library backed up to an external drive (everything is also on my iPod). However, I don't want to have to "count" the new computer as one of the five machines on which I can copy my iTunes library, since it's not technically a "new" computer but just a replacement of my not-so-old one, which was barely 9 months old before it went kaput. Is there a way to reinstall iTunes and my library without getting dinged for yet another transfer of the library? Thanks.

Hi I can't figure out how to post a question of my own, so I'm asking it on this one because it is close to mine.
I just switched from a Sony Viao to a MBP, and tried to transfer my ITunes library from the Sony to my new MBP using a USB stick. I put all the music in my music library onto the stick, it said that it used 4.99 GB, and when I tried to put the music onto my MBP it only added 1.98 GB.
I thought that maybe the music it wasn't transferring was the music I purchased on my earlier laptop, but it transfered a few of my movies that I purchased off of ITunes. Please Help?

Switching music library to new hard drive

Hi.
I recently bought a new external hard drive and transferred all of my music onto it from my old external hard drive. I'd like to change the music folder location to the new hard drive. My question is this: if I change it to the new hard drive, will the playlists be lost? I exported the library, but I think if I import it after changing the folder location that there will be double the songs in the library, but only half of them will be valid and I'd rather not have to go through all my songs and delete the ones that aren't found. Or will the library not be imported at all because it's a new location?
Long and confusing question, but I've probably just made it too complicated in my head. If anyone can offer me some advice, I would greatly appreciate it.
Thanks in advance.

If you want to move your library to an external location, do it this way.
Copy the entire iTunes folder over to the new external hard drive (not just the iTunes Music folder you find inside it). Once copied then use these instructions to open the library from its new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
That's it. Nothing else to do. Just start using the library from its new location. Just make sure the external is always powered up and mounted before opening iTunes. If you start iTunes and the external is not on, it will default back to the internal drive location for anything added to the library. You may not notice it for a while and find a bunch of your stuff is spread across the external and the internal drive. You would then have to change the preference back to the external drive location and do a Consolidate library command to correct.
Patrick

Transferring Itunes data and Library to new hard-drive question

Hello,
First I want to state that I made a mistake when I transferred my music to a new bigger harddrive. My bad.
I look here for some guidance, I read this article after the fact: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive so it was too late for me and I got these "!" signs on all my song. I have over 5000 songs (not including podcasts, movie and TV shows.
I tried to move my library (succesfully) in my new hard drive so I could keep my laptop clean of all music.
I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
My question: Does anybody knows what else should be done to fix this issue (if fixable)? I would try to avoid linking all my music one at the time by using the "locate" function that ITunes pop up when you try to start a song.
It is also too bad that you must do it one song at the time, I calculated that if I do 20 songs a day it's going to take me 250 days and more...
Thanks for any idea/solutions you may have
Thierry

I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
iTunes does not use these files.
They are created only for other apps to access the iTunes library.
Does anybody knows what else should be done to fix this issue (if fixable)?
See this -> iTunes Track CPR v1.3
"This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx). Any correct files found will be added to iTunes and will replace the "dead track" in each playlist it appears in (except Smart Playlists). Most tag data will also be rescued."

ITunes won't let me move files to new hard drive

Hey, all...I'm having a really major problem with my computer. I'm trying to move my iTunes library to a new hard drive. Currently, it's in a 1-terabyte Western Digital USB drive powered through the USB, and I'm trying to move it to a Seagate 1-terabyte drive. I currently have 535 gigabytes of media in my library and I have a MacBook with a 250-GB hard drive that I don't store any music on currently.
I move the library file over to the new USB hard drive, and I consolidate my library as it asks me to do. Then, when I go down to "Organize library", it prepares to copy the files to the new disk, then gives me the big red stop sign and tells me "The disk cannot be read from or written to." and that's that. The files work fine when I try to play them, so they're there, and presumably, not irretrievably damaged. They're just impossible to move.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

New Hard Drive- How to upload from iPod Photo without access to old drive

Needed to purchase/install a new hard drive after Windows corruption on my old pc. My iPod Photo is completely backed up with my entire library/playlists, etc. Old music files were copied to my new hard drive but the iTunes application needs to be reloaded. I am hoping there is a way to sync my iPod with the new version of iTunes on my new hard drive and have the iPod used as a backup drive. Everything I read about this suggests I need access to my old hard drive to change settings on the iPod before I will be able to upload to the new software from the iPod. Does anyone know if what I want to do is possible so that I can retain all of my playlists, etc the way they are? Thanks so much.

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using a lot of the utilities your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Vista so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
TuneJack Windows Only
CopyPod Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Time Machine: New Hard Drive Unable to be "formatted"?

Dear community,
I apologize for this post, I searched a little but aside from the current TM bug, I had a hard time finding an answer to this question. I'm also re-installing on my other laptop so I am unable to reproduce this SNAFU.
I recently ungraded my hard drive on my mid-2008 unibody Macbook, now running 10.8.4 (first of the unibodies!). I finally outgrew my 160 gig hard drive and bought a 500 gig WD Caviar Black. I created a TM restore on my old backup, and installed the new hard drive into my mac and restored from my back up (2 days ago). This isn't like the current bug that's going on at this time, I was able to see and restore from the most recent TM point.
Today, I had to force a close secondary to a run away process (Sophos) that was overheating and taking up my processes. I was unable to force quit, so I did a hard reset. At this point, I got the gray screen of death and was unable to progress past the Apple Logo. Safe booting proved that there wasn't any problem mounting the disk and everything would point to some sort of corrupt process.
When I got home from work, I used disk utility repaired permissions, but was unable to progress past the Apple Logo. I used a NEW back up disk last night to back up my TM to make a restore point, and I was going to just restore the whole computer from that. Unfortunately, I had an error when I attempted to restore from the TM backup.
Essentially, it was able to initiate the back up, but within the first 15 seconds it would stop and say something similar to "...Unable to restore from Time Machine back up, the new hard drive is unable to mount/install restore software/image. Please restart to attempt again..." Apparently, it's rare to have this problem, my googling did not find many recent occurances.
Thus my night has been this:
-- Disk utility x2 on the newly installed hard drive
-- Repaired permissions and verified disk (both checked out), the first time the permissions were changed (--r--x--w to something)
-- Reformatted the disk w/ zoroes x1
-- Reattempt to reinstall from TM (with the same error)
I wish I grabbed screens, but I was a bit frustrated. Right now, I am re-installing ML from the web and then attempting to use the Migration Assistant to restore from these Time Machine back ups. I had around 15 gigs of pictures moved onto the new machine last night (hence the back up last night). So, I'm pretty good with terminal, so I'm not going to be shy about poking around.
Any suggestions? Thoughts? I am much obliged for your input.

So, right after I try to restore I get this message,
"An error occurred while adding a recovery system to the destination disk. Restart your computer and then try restoring again."
This is very vague.

New Hard drive, adding artwork a pain...

Similar Messages

Maybe you are looking for