New hard drive and enclosure for the old one

Hi all,
I'm looking at putting a larger hard drive into my Ally PB. I checked OWC and they're so ridiculously cheap I'm gonna put a 160GB into it. I intend to buy a F/Wire 800 enclosure the old 2.5" hard drive. Now, here is my question: If I remove the existing hard drive and drop into a FW enclosure will I have to reformat the drive or will I be able to use it as a start up disc as is with all the current data and apps on it?

Hey Silly Rabbit! We meet again. I didn't even realize who the original poster was. I thought it was odd that the person responding was you but it didn't match the thread I remember you from. Then I noticed that this was a different thread but you were the one asking for help!
Silly me!
That's perfect! The only interface you're missing there is eSATA. Then you'd be set for life, with all current interfaces supported.
There's one for that too, if you're interested:
FireWire 400/800, USB 2.0, eSATA Combo Enclosure
You can find them on eBay too.

Similar Messages

  • I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

    I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

    Make sure you have cookies enabled for your browser.  Try using a different browser if the problem continues.

  • If I create a new Apple ID and I delete the old one, Will I lose my purchases and data?

    If I create a new Apple ID and I delete the old one, my books, songs, docs and all the data that my old Apple ID contained including my purchased Apps will appear in my new Apple ID and its associated Icloud?
    I want to create a new Apple ID but do not lose my data and purchases, How could I do it?

    Are you entering your Existing Email Address for which you have Access and also are you Entering the Password which Matches Apple Requirement ?
    Enter the Email Address that you already have (like Gmail, Yahoo, MSN, Live, etc) but you have never used it for creating Apple ID before.
    Passwork Requirement is Minimum 8 Characters, Alpha Numeric and Password should Content atleast 1 Upper Case and 1 Lower Case Letter. You will find the more detail on the same page when Creating Apple Id and iTunes will give you Error if the Password you enter does not match their requirement.

  • I have a new hard drive fitted, next to my old one, I want to move my bookmarks from the old hard drive to the new one.

    My old hard drive had a problem, I can get info from it, I just want to get my old bookmarks.

    The user data is store in the profile folder. You can copy the data manually by copying the relevant files from the old profile folder into your current profile folder. If it is just the bookmarks that you want, you can just copy places.sqlite from the old profile folder.
    For details of the location of the profile folder, and what the files/folders in the profile folder are for see http://kb.mozillazine.org/Profile_folder_-_Firefox

  • How can I combine the data from 3 old hard drives onto 1 newer hard drive and not duplicate the data?

    Is there an app that will help me do this?

    Finder. Create three partitions, then drag & drop each old HD onto a separate one. Alternatively, create three folders on the new HD and drag & drop each volume onto a separate one.

  • Had to get new hard drive and need to reinstall iTunes

    My very new PC went beserk and I had to get a new hard drive. Everything off the old drive is irretrievable. I have my iTunes library backed up to an external drive (everything is also on my iPod). However, I don't want to have to "count" the new computer as one of the five machines on which I can copy my iTunes library, since it's not technically a "new" computer but just a replacement of my not-so-old one, which was barely 9 months old before it went kaput. Is there a way to reinstall iTunes and my library without getting dinged for yet another transfer of the library? Thanks.

    Hi I can't figure out how to post a question of my own, so I'm asking it on this one because it is close to mine.
    I just switched from a Sony Viao to a MBP, and tried to transfer my ITunes library from the Sony to my new MBP using a USB stick. I put all the music in my music library onto the stick, it said that it used 4.99 GB, and when I tried to put the music onto my MBP it only added 1.98 GB.
    I thought that maybe the music it wasn't transferring was the music I purchased on my earlier laptop, but it transfered a few of my movies that I purchased off of ITunes. Please Help?

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • HT4927 I have just downloaded iPhoto from the app store. The photo library from my old laptop was backed up on an external hard drive and I retrieved the photos from there.  Now when I open the photos on my new Mac Book Pro, they are small - am I missing

    I have just downloaded iPhoto from the app store. The photo library from my old laptop was backed up on an external hard drive and I retrieved the photos from there.  Now when I open the photos on my new Mac Book Pro, they are small - am I missing something?
    I am using 10.8.2 Mountain Lion btw

    I dragged the Photo library icon from the backup drive on to iPhoto on the laptop
    That means you imported one Library to another.
    Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    So the reason you're seeing small photos is because you're seeing the iPhoto thumbnails from the back up library.
    So, what to do?
    Do you still have the back up? If so, trash this bunged up library and restore from the back up again. HOw to restore will depend entirely on how you made the back up, but no version of restoring includes importing the library.
    Regards
    TD

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • Brand new hard drive and still can't get past the gray screen

    i was having problems with my mac last night going to the gray screen, sometimes i'd get the folder with the question mark. i looked up for solutions and i tried every one i could find short of reformatting the hard drive. nothing worked, getting the start-up disk causes the mac to freeze on the screen with the picture of a disk and an arrow after i press the arrow to go into disk utilities. i took it to the apple store, which i wasn't really happy with my service there- i was called up immediately but then was never able to explain  what was happening to the guy he just plugged in the computer, went back to helping someone else and periodically looked at my screen. i understand that they probably take care of multiple people at once so they don't get complaints about wait times, but i don't think i was really helped at all, he just ended up saying that i needed a new hard drive and if i knew how to put one in i was better off doing it myself then sent me on my way. well i bought a new hard drive and upon installing it and putting in the mac os x disk it still freezes and no solution has worked yet.

    So all you need then is to know how to format the drive and install Snow Leopard.
    How to erase and install Snow Leopard 10.6
    https://support.apple.com/kb/HT3910

  • I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
    For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contactin

    I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contacting you

    Okay, so, fast forward from July to now -
    - I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
    - My computer spent at least 8 hours behind their closed doors in the workshop
    - Several complete erases of the harddrive have taken place
    - Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
    The good news is:
    - They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
    - They believe that my problems stem from either 1 of 2 things:
            - Faulty Hard Drive (even though it is brand new)
             - The wrong build of software being installed.
    Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
    - Andrew =)

Maybe you are looking for

  • Aged Debt Analysis by Sales Employee

    Hi Experts I would like to be able to show our customer receivables ageing report by sales employee.  Can any of the experts suggest how to write a query which give me the same information but can limited by a user defined choice of the sales employe

  • How can i convince my parents to bring me ipad mini

    how can iconvince my parents to bring me ipad mini 16 gigs wifi, they say that my iphone 4s is enough and we have an ipad that my brother does not let me use any help

  • Problem in DB13 - standalone gateway installed - error due to env

    Hello, As we have db and ci on separate server and there was no gateway on db server, I installed standalone gateway the rfc connection started working fine. When I try to execute any BR* command through DB13, it gives error. I checked using SM69 the

  • Auto Open on Device Connect

    When I connect my camera to the computer, Lr does not automatically open. I have gone to the Preferances interface to ensure Show import dialog when memory card is connected is checked. Lr does not even show up in the Auto Play pop up window. Any ide

  • Why the resource module size is so big

    i try to make a resource module so that i can loading the resource at run time. what i do is 1` make a lang.properties (1kb) only one key-value in it  just for test 2` run mxmlc -locale=en_US -source-path=locale/{locale} -include-resource-bundles=lan