New hard drive and mac OS installation question- tiger?

I have arrived at the sad conclusion that my iBook is needing a new hard drive. No better time for an upgrade. I have the iBook Dual USB, 800mHZ.
I noticed that OS Tiger requires a DVD player to install correctly? If so, what am I going to do? I only have the cd player on board. If this is the case, am I going to be stuck loading Jaguar on to the hard drive and then upgrading? If so, where does one find a retail copy of either Jaguar or Panther? (I noticed Panther also says it requires a dvd player to install?)

Hi PFMbyNight!
Here is some additional information.
Tiger is available for purchase at The Apple Store (US).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Similar Messages

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

never mind i got it by going into my account and veiwing hidden items and there it was

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

New hard drive and have a question about photo stream.

My hard drive recently crashed. I have a new hard drive and am trying to organize my iphoto again. There are 1,000 photos on my iphone (photo stream) how do I get these onto my mac? My mac only has the last 30 days. Do I have to save each individual photos to the camera roll?

G9daniel wrote:
Is there a way to get user settings returned to what they were before?
Not unless you have a Time Machine backup of your system.
If you kdo you can just boot from the SL install disc and use that yo restore your system to the new HDD.

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

Make sure you have cookies enabled for your browser. Try using a different browser if the problem continues.

New Hard Drive and Snow Leopard Upgrade

I'm getting ready to install a larger hard drive in my MacBook Pro. I am also going to install Snow Leopard. I assume that I just boot from the Snow Leopard disk after I install the new hard drive and it will walk me through the installation. Sorry if this is a dumb question. I'm new to Mac.
Also, I have copied my files to an external hard drive. However, will I be able to access my old hard drive if I put it in an enclosure. This will give me access in case I missed something.
Thanks in advance for your help and advice.
Dave

I am doing the same thing... an Apple Authorized Repair facility installed my new drive yesterday. They were supposed to create 2 partitions for me, but failed to do so. Instead, they just cloned my old hard drive over to the new one. This really *****, because Spotlight and System Profiler say that my disk capacity is only 200GB and available disk space 40GB (same as original drive).
What do I need to do to create 2 partitions, one with FAT32 that is 25GB (for both Windows and Chrome OS/Ubuntu) and the other 615GB partition for OS X 10.6?
The important caveat is that my Samsung Superdrive is dysfunctional, as discussed in this long thread.
When I now try to use Disk Utility to Partition the drive, I get the error:
"PARTION FAILED Partition failed with the error: Could not modify partition map because filesystem verification failed"
And when I try to use Bootcamp Assistant to partition the drive, I get this error:
"THE DISK CANNOT BE PARTITIONED BECAUSE SOME FILES CANNOT BE MOVED. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Does this mean that Apple Computer has totally screwed me over? First they gave me a faulty Super drive, and then they install a hard drive without properly formatting the partition? What should I do now?

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Brand new hard drive and still can't get past the gray screen

i was having problems with my mac last night going to the gray screen, sometimes i'd get the folder with the question mark. i looked up for solutions and i tried every one i could find short of reformatting the hard drive. nothing worked, getting the start-up disk causes the mac to freeze on the screen with the picture of a disk and an arrow after i press the arrow to go into disk utilities. i took it to the apple store, which i wasn't really happy with my service there- i was called up immediately but then was never able to explain what was happening to the guy he just plugged in the computer, went back to helping someone else and periodically looked at my screen. i understand that they probably take care of multiple people at once so they don't get complaints about wait times, but i don't think i was really helped at all, he just ended up saying that i needed a new hard drive and if i knew how to put one in i was better off doing it myself then sent me on my way. well i bought a new hard drive and upon installing it and putting in the mac os x disk it still freezes and no solution has worked yet.

So all you need then is to know how to format the drive and install Snow Leopard.
How to erase and install Snow Leopard 10.6
https://support.apple.com/kb/HT3910

I recently installed a new hard drive and don't know how to install the software.

I recently installed a new hard drive and now when I turn it on, it just shows a blinking file with a question mark on it. What do I do now? How do I install the software if I can't get on the internet from my MacBook? Can the apple store do it for me?

Which operating system version did you have?
We also need to know which exact model Mac (almost always include this information when you post - saying MaBookPro is almost as bad as saying "Ford car" in terms of the variety of submodels) because some newer models can boot from the Internet.
OS X: About OS X Recovery - http://support.apple.com/kb/HT4718 - "OS X Lion, Mountain Lion, and Mavericks include OS X Recovery. This feature includes all of the tools you need to reinstall OS X, repair your disk, and even restore from a Time Machine backup without the need for optical discs."

So I formatted a brand new hard drive to MAC OS (Journal), I then could save on the hard drive. Not two days later Im back at square one, the program wont recognize the hard drive again.

So, hard to beleive, but I am having some trouble with Final Cut Pro X.
This last week I formatted a brand new hard drive to MAC OS (Journal),
so that I could save on that hard drive.
Well it went great.
I saved my project on there and copied a few others over as to free up space on my Laptop.
Then, not two days later Im back at square one,
the program wont recognize the hard drive.
It wont even open the events up off my hard drive,
as to jog the program into reqcognizing the scratch disk (which worked twice before).
What happened?
How do I get the program to re-recongize my newly formatted hard drive?
Please help!

The name of the drive, or the name of some folders inside the drive, may fool FCP X into believing it is a camera.
Also, you should not use the drive for time machine backups.

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

New Hard drive and Window disc

I bought a dv6-6047cl before, and the hard drive is not working now. (No window disc with the laptop)
So i buy a new hard drive,after i put the new hard drive and it shows me
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
What should i do?
Someone told me i should buy a new window 7 Home to RESTORE TO FACTORY SETTINGS. Is that right?
If yes, which CD should i buy? Can you show me the picture?
If not, what can i do?

you download the ISO then you need use the Microsoft tool to make the bootable memory stick or cd.
Use the links in my 1st post for the Microsoft tool & a guide on using it.
Once you have your boot media made you need plug in the usb stick or load the cd & then boot notebook & enter boot option menu & boot from cd or usb drive pending on what you decide use.
A very basic guide on installing windows 7 is in link below, don't follow it blindly, just use it as a rough guide as needed & think twice, do some research or ask questions if hae doubts<>problems ...
http://www.wikihow.com/Install-Windows-7-for-Beginners
Like my post? Click Kudos (thumb+) to show appreciation.

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New hard drive and mac OS installation question- tiger?

Similar Messages

Maybe you are looking for