New Hard Drive and trying to reinstall OS. Have Hp Recovery Discs but DVD drive broke

Hi to all,
 I just put a new hard drive in my HP Dv7. I also ordered recovery discs. When I tried to put the disc in I then found out my  DVD drive is not working
My question is can I transfer the recovery disc to a USB flash drive and then boot from there? 
I would appreciate any insight!!
Thank you in advance,
Marc
This question was solved.
View Solution.

You cannot copy from recovery DVD to USB.
What is the problem with the drive, do you have a boot DVD to try?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

  • I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • I transfered all my G5 files onto a drive and am now trying to transfer to my new Mac Mini.  I've selected my source as "another disc" but my drive (a rugged 500GB drive) isn't being recognized. Any tips?

    I transfered all my G5 files onto a drive and am now trying to transfer to my new Mac Mini.  I've selected my source as "another disc" but my drive (a rugged 500GB drive) isn't being recognized. Any tips?

    Impossible to answer with information provided.
    Allan

  • Wiped hard drive and tried to reinstall Mountain Lion but it installed Lion instead.

    Everything was fine except that it was going slow from 2 years worth of clutter. I wiped the hard drive and continued on with the installation instructions without noticing until now that it installed Lion instead of Mountain Lion. What do I do? If I have to reinstall, I'd rather not have to download it again. I have it on my external hard drive but it won't show up since I did all this.

    Welcome to Apple Support Communities
    You used Internet Recovery to reinstall Mac OS X, so Lion was installed instead of OS X Mountain Lion. See > http://support.apple.com/kb/HT4718
    To install OS X Mountain Lion, open the Mac App Store, log in with your Apple ID, go to Purchases and download OS X Mountain Lion. If you have a USB drive with Mountain Lion, you can use it to upgrade to OS X Mountain Lion

  • I am trying to reinstall CS5.5 from a disc, but I am told my serial number is invalid (student and teacher licensing)

    Does student and teacher licensing expire after a certain amount of time? I know I am entering the correct serial number, but I am told it is not valid. What gives?

    Hello 2minnie,
    in this case I would load down a version from there Download CS5.5 products (not from your disk) and change it with your serial number as described. See
    Read before you download a CS5.5 product
    You need your CS5.5 serial number to complete the installation. Need help finding your serial number?
    Sign in to My Adobe to find serial numbers for registered products.
    Or, see Find a serial number.
    Make sure that your system meets the requirements for Creative Suite 5.5 products.
    Having trouble? Get help from our community experts.
    If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    Hans-Günter

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

    My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
    Can anyone help?

    Yep.  Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI.  I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
    It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column.  Now it's just blank.  Link to screenshot below:
    http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
    Note the install date.  That's when I was able to successfully reinstall it.  Now I can't even do that.  I should also mention I tried Revo Uninstaller.  It deleted one small registry key, but nothing changed.
    By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it?  It refused to run unless I had one in it, so I used my install dvd.

  • I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how d

    I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how do I fix it?

    You can't fix it.  iTunes bought content is DRM protected. so it can only be played on authorized devices.  i.e devices associated with the apple Id used to purchase the content.  Its copyright protection that the rights owners demand.
    Circumventing it, is illegal in most countries, and as such cannot be discussed here.  If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

  • I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    Hi,
    Have you tried the help documents below:
    Error "The serial number is not valid for this product" | Creative Suite
    Invalid serial number error
    In case of any other error message, please specify.
    Regards,
    Sheena

  • I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

    I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

    Try these solutions: Error "Licensing has stopped working" | Mac OS

  • Hard drive crashed, replaced drive and need to reinstall CS5 Extended but I don't have serial number, only product code on box. How do i get my serial number?

    hard drive crashed, replaced drive and need to reinstall CS5 Extended but I don't have serial number, only product code on box. How do i get my serial number?

    Beamer96 if the software has been registered then it will be under your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • I bought a new laptop and tried to reinstall Photoshop elements 11. I saved the original packaging and everything inside(or so I thought). I can't find the serial number anywhere.what if anything an I do?

    I bought a new laptop and tried to reinstall Photoshop Elements 11. I saved saved the original packaging and all contents (or so I thought). I can't find the serial number anywhere. Any thoughts on what I can do?

    If you originally registered your product the serial number will be stored in your Adobe account. Click the red logo (top left on this web page) sign-in, and then click the Manage Account button. It should be possible to browse your purchase history. You are looking for a 24 digit number commencing 1o57.

  • I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

    I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

    If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
    The gray area below the blue bar is a link to start a chat.

  • My iPhoto would no longer open, I uninstalled it, and tried to reinstall it using my software reinstall drive. A message keeps coming up that installation failed, What can I do now?

    My IPhoto would no longer open, I uninstalled it, and tried to reinstall it with my software reinstall drive.  A message keeps coming up, installation failed. What do I now?

    If you have a copy of it backed up, restore that. If not, back up your computer, upgrade it to Mavericks, and then get the current iPhoto version. If you don't have it backed up and don't want to upgrade, go to the Mac App Store main page, click on Support under Quick Links, contact Apple, and see what they say.
    (104007)

  • How do I fix my early 2008 mac pro boot hard disk. Lost everything when it crashed hard, can not reinstal via cd/dvd drive... are there any fix get it boot from dvd drive?

    I have an early 2008 MAC PRO Quad Core 3.0ghz processor. 8 Gig of rams, with a 1 Gig memory  Radeon 5770 HD Graphic Card running the latest Version of Snow Leopard OS.  Last week lighting struck the house take out all of my hard drives (4) thank god the surge protector mitigated the mother board from damaged, use the Parted Magic to check out the motherboard and it intact with no damage. I can boot with the Parted-magic and be able surf and post this question to this forums. I replaced a newly formatted hard  drive and trying to installed OS X Mountain Lions to the new drive, but unable to have it boot in my MAC PRO DVD, I get the usual chimes during the booting processed but the screen remain blackout, but able to boot with Parted-Magic to surf the web and access Apple sites/forums.
    I am not well verse in using the Parted_Magic to repair or get my-mac to boot normally so I can reinstall OS X. Any help would appreciated.
    Thank you
    Disabled Veteran. 

    Go to System Profile and look, does it say "MacPro3,1"?
    That is 2008.
    FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
    You can but take a hit in performance.
    Sounds like MacPro1,1.
    Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
    In 2007 March an 8-core 3GHz did come out 2,1.
    So just to be clear.
    ===========
    It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
    Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
    And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
    Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
    No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
    Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
    You should be fine iwth Windows 7 DVD and one drive, or even XP.
    Make sure you take your time and reconnect cards etc properly and any cables.
    Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
    Why aren't people Cloning as a Backup Strategy
    Carbon Copy Cloner 3.4.2
    How To clone

Maybe you are looking for

  • ITunes not working/iPhone iOS7 won't update

    Alright so apparently all of Apple software has decidede to crap out on me that I'm starting to regret spending money on this phone. A software update came out, iOS 7.1 so I very stupidly decided to download. I say stupidly since it seems like that's

  • Technical Content Activation failed

    Hi guys, I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI. However, I am facing with these problems: 1. If I choose only Activate SAPI DataSources, I will get a time out. 2. If I choose only Activate Tec

  • How do you change the boxes to bubble in messages on a mac?

    I accidently clicked something and I turned the message bubbles to boxes and I dont know how to change them back

  • Help - iPad(Original) won't charge

    I tried hooking it to my computer, tried different adaptors, different outlets, but nothing is working. Any suggstions?

  • How can i call a condition type into my ALV report

    I am developing one ALV report in that how can i call a condition type.I am one condition type PB00 for special price.This special price column should be present at the output list.This special price is not there any one of the database tables.So we