New hard drive but bookmarks still there

Is it even remotely possible that a "new hard drive" with Mavericks freshly installed could have my old bookmarks on it?? Are they stored with our Apple ID or something? Because I'm on my 3rd replacement drive within a couple of months from this Apple Certified dealer/repair shop, and I just got my computer back yesterday and they said they replaced hard drive, and installed Mavericks, but my Safari bookmarks from my original replacement hard drive were still there! There was no other trace that I could see from the old drive though.
I'm going crazy because I keep bring my computer to this place and they keep "replacing" the hard drive and I can't WORK. It always ends up completely freezing after bringing it home and using it for less than a day. I spoke to them yesterday and they said when they ran the diagnostics on my machine, everything else checked out ok. But is it possible that some other component is destroying my hard drive, or that maybe its not the hard drive at all? Even though their diagnostics say everything is in check? Or do they keep giving me the same hard drive (I never wrote down the serial number of it unfortunately, so I can't check) after they "fix it" or something? I'm going crazy.

What build model (identifier) MacBook do you have?
Since this series was manufactured, upgraded, and continued as the main
MacBook model (not MB/Pro, not MB/Air) from 2006 through 2010, you'd
have to specify so replies to technical questions have a specific basis to it.
If not a MacBook basic series, then it may be a MacBook Pro, etc.
•How to identify MacBook models
•How to identify MacBook Pro models
•How to identify your MacBook Air
You may have to consider getting a hard disk drive from a reputable third
party source and if the MacBook is one that isn't too difficult for the user
to upgrade or replace a hard disk drive, use instructions to do so yourself.
An example of such a HDD & upgrade source, with video & other instructions
is OWC or macsales.com, where you match up parts using the Model identifier
or look through their page and read what they say about identifying your MB,
which is helpful if you choose to also upgrade the RAM chips correctly.
A general reference of what a mac-centric reputable vender can offer includes:
http://eshop.macsales.com/shop/powerbook-ibook-macbook/
If you had access to an official retail Apple Store with Genius bar, they'd likely
be able to perform a diagnostic test to see what the problem(s) are with your
MacBook. Then their staff specialist could suggest a course of action, even
if the computer is out of warranty (likely is) they usually do this for free. Where
an authorized reseller may not be set up to do this, without a service fee.
http://www.apple.com/retail/geniusbar/
There may be other Apple Authorized Service Providers not too far from you.
Or there may be a retail Apple Store with Genius bar within half a day away.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
The device should have a complete and thorough diagnostic by those who
seek to resolve the issue and not just throw a limited array of parts at it.
For your own security and complete backups of your system & software, you
could get an externally enclosed self-powered hard disk drive that can support
a bootable full system clone (use carboncopycloner or superduper utility) then
you could restore your computer from that, in addition to a separate device for
use with Time Machine, and so on. Be your own first line of tech support. I am.
You could use Disk Utility to see the serial numbers and other HDD info; also
if you can access the system profiler (different name in Mav 10.9 than old OSX)
that too will tell you a cross-section of hardware items and software in the Mac.
Good luck & happy computing!
edited

Similar Messages

  • Hard Drive crashed.  I have a new hard drive but I cannot log into computer.How do I reset password to my i Mac?

    Hard Drive crashed.  I have a new hard drive but I cannot log into computer.How do I reset password to my iMac?

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.

  • When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine

    When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine.

    SMART is a technology that monitors the drive for signs of impending failure. You can verify that SMART is indicating a problem in Disk Utility. Select the hard drive and look at the bottom of the window. It should look like this:
    If the SMART status is not "Verified" then you should back up your drive and start shopping for a new one.

  • Restore using Time Machine to new hard drive, but last "full" backup was 2012.  how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

    Restore using Time Machine to new hard drive, but last "full" backup was in 2012.  How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user? 
    I entered Iphoto for my user and only photo up until 2012 were in the library.  I thought the restore would do the incremental Time Machine backups too.....
    Running 10.8.2

    It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • Problem: installed new hard drive but can´t boot from leopard dvd

    So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
    As an alternative I just tried booting the comptuer using the original CD and it did read it.
    I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
    Is it that my ibook g4 can´t be booted from leopard dvd?
    Please advise. thanks!!

    OK, so I decided to leave my computer resting all night and give it a new try this morning.
    This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
    In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
    - I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
    - My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
    Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
    NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
    Below is the information I get from coconut battery:
    My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
    The last system profiler I was able to pull shows:
    Battery Information:
    Charge Information:
    Charge remaining (mAh): 58320
    Charging: No
    Full charge capacity (mAh): 58512
    Health Information:
    Cycle count: 256
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 16250
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 15
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 15
    Dynamic Power Step: Yes
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Wake On Modem Ring: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Dynamic Power Step: No
    Reduce Processor Speed: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On Modem Ring: No
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    Clamshell Closed: No
    UPS Installed: No
    AC Charger Information:
    AC Charger (Watts): 26
    Connected: Yes
    Charging: No
    Any help is greatly appreciated.
    Thanks a bunch!!!

  • MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

    So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
    So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
    To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
    but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
    Both hard drives have OS X 10.9.4 installed
    If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

    So after switching the internal SATA cables from each computer, now we have
    His computer, with my SATA cable:
    1) Worked with every hard drive!
    My computer, with his SATA cable:
    1) Works with 1 TB Toshiba hard drive
    2) Works with 500 GB Seagate hard drive
    3) Works with my original hard drive
    4) Flashing folder with question mark with his old hard drive
    So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

  • I transfered all my photos to an external hard drive, but I still get the low disk space message when I try to upload more photos. Help please!

    I moved all my photos from iphoto to an external hard drive, but I am still getting the "low space message" when I try to upload more photos to iphoto.
    How do I free up the disk space in iphoto?
    I currently have 642.1 MB of free space, but I thought that once I moved all my photos out of iphoto, that it would free up a bunch of space.
    Help please!

    Have you told iPhoto about the new location? If you haven't then iPhoto is ignoring it and continuing to use the original one. If you have completely transferred the library to the external hdd then you can delete the one on your internal one, but make sure that the one on your external drive is complete and has the iPhoto library icon on it. Whatever you do, don't lose your photos!

  • Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

    Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
    I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
    My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

    Hello CaptianNike, welcome to the HP Forums.
    I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
    You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
    If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
    Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
    I hope this helps.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Apple put in a new hard drive, but not the computer is VERY LOUD!

    I just got my 13 month old Intel iMac back from the Apple store -- it needed a new hard drive. When I first turned on the computer, it was very loud, and I thought they gave me someone else's computer by mistake, so I checked the Serial Number, and apparently it's my computer.
    I can't take this noise. What's going on? The fan wasn't broken, but this sounds like a new fan in the computer that is much louder than the old fan.
    Also, the Apple geniuses told me the computer would use Time Machine to install all my old settings (I have an external hard drive hooked up to the iMac). But it's not working at all. Whenever I tell the new hard drive to "Restore to a Time Machine Backup" and select the backup hard drive, the computer screen goes gray, and it starts all over again (with the "Hello" screen in all the different languages.
    Please help. I guess the MIP issue is the noise -- I can't work with a computer this loud. It gives me a headache. Should I just take it back to the Apple store, and have the noise fixed first? There never was a noise problem before I took the computer in for the broken hard drive.
    Thanks.

    HI,
    Try resetting the SMC. http://support.apple.com/kb/HT1543
    If that doesn't help, take it back.
    Tip... whenever you take a computer in for service and you pick it up, make sure it's running without problems *before you leave*. Especially in this case where you got it home and now have this noise issue.
    Carolyn

  • New hard drive but troubles with I tunes after re-install

    I've recently had a new hard drive installed on my ibook G4. Its a 250GB Powerbook Hard Drive Western Digital Upgrade.
    I did not have the disk for leopard as this machine was bought as a refurb, so we installed Tiger OS X from another Ibook G4 we have in the house. I used a firewire from the older ibook g4 to the one with the new hard drive to transfer the data.
    Everything seemed fine, but I noticed that my Itunes library was missing. I searched through applications and found a folder marked Itunes with the missing music.
    I tried to import them into the library all at once and it failed. So then we tried
    to import them in batches like all of A then B etc.
    It seemed to work but then when I closed I tunes and tried to reopen it, nothing.
    It will not re open I get a window that says I tunes quit unexpectantly with the 3 buttons
    try again (doesn't work) report and close.
    Another issue that has just come to light is that when I was looking at a website called Edufire
    (a free educational audio resource) Safari automatically shut itself down.
    Not sure what to do next....any suggestions
    And many thanks for helping with the mysterious ticking noise.

    If you have actual music files in a folder, on the desktop, and then
    have iTunes app open and running (not full screen) you can often
    drag music files into the iTunes app this way and they will be seen
    and copied into a file location chosen by the app itself.
    As to the rest of the situation, the process may have worked fine
    in a mechanical way, as far as it goes. However, you need to get
    a correct OS X disc in order to not only maintain a legal license for
    the use of the software (unless you have a Family Pack multi install)
    and also for basic computer and system maintenance.
    If the original software packet contents for that computer have been
    lost, then you may see if (by calling the 800# in online Apple store)
    you could inquire of the possibility of getting a replacement set; that
    would be an original OS X install-restore set, as-shipped, for a fee.
    In order to perform system maintenance, you boot the computer from
    the correct installer disc to run Disk Utility, and all the tools it offers;
    including the proper formatting and partition, repair disk, etc on there.
    And, if used with the iTunes Store, the computer would have to be
    authorized. Having an unauthorized copy of an OS on what is now
    two computers, may be a problem with using these with an account.
    Have you tried a different browser, such as Firefox 3.x or Camino?
    There may be other issues in the browser question. Several answers.
    Good luck & happy computing!

  • I reinstalled a new Hard Drive but cannot get the DVD tray to open to install the Mac OS?  How do I open the Tray?

    I reinstall a new Hard drive.  But I cannot open the DVD tray to install the OS?  All I get the the ? in the folder when the computer turns on?

    Hi copa1226:
    Sometimes the best solutions are the manual ones.  There is a mechanical fail safe built in to these devices,  I have had to use this method several times myself, so ....
    .....   Try this:
    1) Power off your mac pro.
    2) With your finger, pull down the metal bezel on the affected drive.
    3) You should now see the front plastic bezel on the affected drive, it is usually black or grey.
    4) Look for a small pinhole somewhere on the front. It will have a very small diameter, about 0.5mm.
    5) Yes it's there, all cd/dvd drives have one!   Note: a small flashlight comes in handy here.
    6) Straighten out a standard paperclip for about 2 -3 inches.
    7) Insert the paperclip in the small hole and push, you will have some resistance, and then the drive tray will slowly push out about 0.5 inches or more.
    8) Grab the tray and pull it out !!
    9) You are done!
    10) If you do this gently you won't hurt the drive. Boot up and the tray should automatically slide back in. You are good to go.

  • If I install new hard drive can I still restore from time machine?

    I'm planning on updating the hard drive in my macbook to a 320gb drive. I currently have a drive with around 120gb of space. I know there are programs available to back up the entire hard drive. But, I've been having issue with my computer lately and I would rather just start over and just back up microsoft office because I don't have the key anymore and my iTunes library. Can I do all this from just my Time Machine back-ups and reinstall everything else? Or is the best way to make a bootable back up to my new drive and then install the hardware in my mac book.
    Message was edited by: dsheppard20

    I did this just a few weeks ago. I replaced my 80g hd with a 320g hd. I used time machine to backup my computer. All I had to do was swap hard drives. Use the install dvd to start computer. i then used disk utility to properly format the new hard drive (mac journaled). Then I used the restore option. That was all I had to do. Everything from my old hard drive was put on my new one in about one hour. Time Machine backs up your entire hard drive unless you excluded anything. So you can have a clean install of everything just the way it was on your old hard drive just by using Time Machine.

  • Installed new Hard drive, but Mac OS X won't install

    Hi, I posted earlier about installing a new hard drive in my G3 iBook, and well, I did that! After the installation, I put in the Mac OS X CD and opened up the disk utility from the CD, and sure enough the new hard drive was there. So I clicked on the hard drive icon, then clicked erase, and selected Mac OS X extended (journaled). After this was complete, I attempted to install the Mac OS, but it told me that it could not install Mac OS X on this drive! please help me.

    Alas, I too have expirienced the same problem, and I have all your answers. Yes, DO use www.ifixit.com, the instalation looks difficult, bot is quite easy. Check eBay for some HDs, I got a brand new 40 gig one for $70. I had a problem installing the OS with the new one, so if it happens to you try this:
    1. Make sure you have the system restore disks.
    ( your restore disk (there are 4 of them,) shoud restore to mac OS 9 and you probably have a seprate X disk(s))
    2. Insert the OS X disk and boot up (manualy insert disk(paper clip))
    3. At the top there should be some buttons like the apple logo, file, etc.
    under one of the menues there is a button either labled Services or disk utility
    4. Select the erase disk tab.
    5. erase your (empty!) HD.
    6. shut down
    7. manualy insert restore disk 1
    8. Boot up holding down the C key, and run system restore
    9. when that is done, boot up as OS 9
    10. Insert the Mac OS X disk
    10. restart whyle holding down the C key
    11. install X.
    hope it works!

  • I backed up my macbook pro before they intalled a new hard drive but when I reinstalled, my book says it isn't compatible with Maverick and I can't get the last year of pictures or files back.

    I backed up my macbook pro before having a new hard drive installed. They installed Maverick for me, but now My Book says its not compatible and I can't restore my files and pictures from the external hard drive. What can I do?

    Simple if you have a complete backup of your old drive erase the new one and restore from your Time Machine backup. That will put your Mac back to exactly like it was before you had the hard drive changed.
    In all honesty I have no idea why most all the Apple stores upgrade every Mac that comes through to Mavericks.
    To do the erasing and restoring you need to either boot from the original system discs that came with your Mac or if it came with either Lion or Mt Lion use the Online Internet Recovery system. To boot to that at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. Once thje Mac OS X Utilities screen loads use Disk Utility to Repartition the drive as one partiotion to remove all data from it. Then when that is done exot disk Utility and select Restore from Time Machine Backup. Have the TM backup drive connected before you start this process.

  • Installed new hard drive, but now cannot get OS X 10.5 to install?

    Hi everyone,
    I seem to have gotten myself into what is probably a very stupid position, so fair warning on what you're about to read.
    I have a Macbook Pro 17-inch, early 2011, 8 GB Ram, 2.2 Quad-core, Model A1297.  The original hard drive (750 GB Toshiba MK7559GSXF) started warning me of S.M.A.R.T failures and gave me just enough time to move my data off the laptop.  I bought a Western Digital Bare Drive 500 GB (this guy) and swapped the two out.  At this point, my original hard drive was completely dead and it's completely my fault for not catching it earlier (btw I could both verify and repair the failing disk, but the SMART status was failing so it would not allow me to do much more than that).
    Once I installed the new hard drive, I erased/restored the new drive using DU and then tried two different things that have both failed:
    Went to the next steps without partitioning the new drive
    Went to the next steps after partitioning the new drive once using the format of Mac OS Extended (Journaled).  Picture.
    Then I tried to install Mac OS X two different ways that have both failed:
    Tried to "Reinstall Mac OS X" through the online option (accessed through command + option + R on bootup), however this failed and I realized that it probably failed because my macbook shipped with Leopard and it was trying to install Lion.  Tried it anyway and got variation of "this option is not available at this time" error.
    Tried to reinstall the OS using a DVD.  This Macbook came with the DVD for Mac OS X Leopard Version 10.5.1 System build 9B21.  I inserted the DVD and then restarted the laptop holding down the option button.  When I watched videos online of other people doing this, they always got at least two different 'icons' so to speak when they did this (around minute 3:13 of this video for example): the hard drive and the Mac OS X Install DVD icon (picture).  I only got the install DVD icon.  When I went ahead and clicked the arrow to install the OS, the DVD spins for a few seconds and then the laptop freezes (can't move mouse, no discernible sounds that anything is happening)
    At this point, I know I've screwed up repeatedly, but I don't know how to fix it.  Any ideas?

    Hello,
    Not sure what you used to Format it in the 1st place!?
    Once booted from the 10.5.1 Install Disc, try reformatting the drive again, does it show in Disk Utility from the Install Disc??
    When I watched videos online of other people doing this, they always got at least two different 'icons' so to speak when they did this (around minute 3:13 of this video for example): the hard drive and the Mac OS X Install DVD icon (picture).  I only got the install DVD icon.
    Didn't watch the video on my slow connection, but option/alt boot would only show Drives/CDs/DVDs with OSX already installed on them.

Maybe you are looking for

  • Can't open flash

    i can't view flash content with my safari. i followed the window that says get flash player, i've checked my java script and tried safari help, but it still doesn't work. it's all fine on my internet explorer though. i'd be glad if you could help.

  • Function module call with destination

    Hi, how can check if a function module call with destination works or not ? How can I debug. What can be the reason if it is not calles regards ertas

  • Executing custom Transaction from Dialog Task

    Hi all,       I am calling a custom Transaction from a dialog task  (absolutely, from the method of the task). The user will be executing that workitem from ESS. My problem is, while the user executes the workitem it is giving two screen titles in th

  • Product Category Hierarchies

    Hi,   I have replicated the product categories from ECC to SRM without activating the hierarchies. Now, we wanted to use the Hierarchies, so can I just activate the hierarchies? or do I need to maintain the same in ECC? is there any hierarchy concept

  • XI Integation to BW and EP

    Hi We have upgraded our system from version 4.6b to ECC 6.0.  Do we require to do Interfacing with EP and BW to R/3 using XI ????? If Yes then In which scenarios??? Regards Swatantra