New hard drive cant install mac os x

Was having the question mark on start up problem, did everything I could and still didn't work. Ended up taking it to a mac store and they said i needed a new hard drive. Bought a new hard drive at bestbuy installed it and now Im trying to install mac os x.. my problem is that when it gets to the point that says "Select the disk where you want to install Mac OS X" there is nothing to select. Is it still not recognizing the new hard drive? If I start the computer up with out the mac os x install cd i still get the question mark with the new hard drive in. Does that mean the computer might be jacked and its not the hard drive?? Thanks

What ds store said.................
Hold c and boot off the OS X installer disk that came with the computer first.

Similar Messages

Installing new hard drive and installing mac OS X again?

Hi I just ordered a new seagate 160gb hard drive along with 2gb corsair ram and im waiting for it to come in the mail.
Anyways I was wondering when I install the new hard drive in.... do I just put in the macbook os x installation disk or do I have to do something else.
Also when I install it will it ask for the serial number or anything like that? because I dont see the serial number anywhere on the disk or the laptop.
Basically what im asking is what are the steps that need to be done.

thanks a lot, when I put on the new hard drive can I
put on the tab on the old one and put it on the new
hard drive so when I want to take it out I can?
because should I want to sell the laptop one day i
would want to put on the original parts.
Yes, follow this video.
http://eshop.macsales.com/tech_center/index.cfm?page=Video/macbook/macbook/high. html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

Had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Installing new RAM and hard drive and installing mac os x

Hello all.
I have a new hard drive and ram for my macbook that I plan on installing. Would it be okay to install both at the same time and then install Mac OS X from the install discs? Or, would I need to install the hard drive first, install Mac OS X, and then install the RAM?
What do I need to do?
Also, when installing MAC OS X from the discs with a new hard drive, will it allow me to do a fresh install as soon as I enter the disc? Or, do I have to restart the computer with the disc in and hold down the C key?
Please bless me with your wisdom.
Thanks.

Hip Hoppa:
Congratulations on installing the RAM and Hard Disk Drive. Now you need first to format the HDD, then install the OS, and restore from backup.
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger and later) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
Installation Process
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.5.6 Combo Update (Leopard) or
Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
If you have your old HDD in an external enclosure you can connect it to the computer and use Setup/Migration Assistant to move your stuff from the old drive when prompted.
cornelius

Internal hard drive failed - install Mac OS X on external firewire?

Hi, hope someone can help me.
The other day my internal hard drive in my MacBook started to click. I did a hardware test, and the drive now doesn't show up at all, either in the test or when I go to install Mac OS X.
Is it possible to buy an external Firewire hard drive, and install Mac OS X on it, even though the internal hard drive isn't recognised?
Here is the external hard drive I was going to buy http://www.amazon.co.uk/Western-Digital-Premium-External-Firewire/dp/B000F6SGB4/ ref=sr11/203-7120413-7742330?ie=UTF8&s=electronics&qid=1174334464&sr=1-1
Also, is there any thing else I need to know before I do this...
I need to boot from an external hard drive as I cannot go to an Apple store to get it fixed and I am not really in a position to send it off for repair, as I am at Uni.
Thanks for your help!

You need to call AppleCare Support and get the hard drive replaced. None of the MacBooks are a year old yet, so they're all still covered by the original one year warranty. This sounds like a problem that should be covered, why bother with an external drive? If you're not willing to be without it, yes, you can install Mac OS X to a FireWire or USB 2.0 hard drive and run your MacBook from that.
-Doug
P.S. If I were you, I'd spend the extra £15 and get the 320GB version of that drive. I'd get as big of a drive as you can!

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them.

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them from Apple or if I buy them off ebay will they work? Also its A Macbook Pro 2008 15 inch glossy with 2GB of Ram the serial number is worn off what kind OS do I need?

Wondering if there was a way to purchase them from Apple
Yes. Contact Apple Support using one of the options in the Contact Us below. You will need your MBP's serial number and payment method for a nominal fee. If the exterior serial number is illegible look elsewhere for it: MacBook Pro: How to find the serial number
or if I buy them off ebay will they work?
Probably not. Grey discs are system-specific and will work only for the exact model MBP with which they shipped. It's likely that Apple will charge you less money, and it will be guaranteed to work.

I have a power mac and the hard drive is about to die, i have a new hard drive to install, i know how to remove and put the old in the second space and load the new one, then what...when do reinstall the OS and transfer data from old drive

I have a power mac, the hard drive is struggling, I have a new hard drive ready to install, after I pull the old one and put the new one it's place and place the old one in the next slot ready to transfer data....how do I start this next step. Do I down load OS, and go to utililities...please just a step by step after hard drives in position.

Hi Susan, you must have a Mac Pro, Powermacs cannot run 10.6.x
Anyway, once you Install the new drive, you likely must Format it...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
Then Install the OS & on first boot of the new install, after a step or two, avail yourself of Migration Assistant & Migrate everything.

Installed new hard drive in my mac book wont boot up

I installed a new 1TB Hard Drive, it fit perfect. This is the first time I try this.
When I turn on my Mac Book it powers up but only a folder with a question mark appears on the screen
HELP

Here is away of installing a new HDD in a MBP. You do need an enclosure.
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
Good luck.
Ciao.

Tutorial: Clone/Installing new hard drive (hdd) & install windows(FAT NTFS)

This is a tutorial for people looking to clone their internal hard drive and install it into their macbook (usually because you've upgraded to a larger hdd). I have also included an installation of windows vis a vis boot camp style. Ive been battling this for the past 3 days, so hopefully this tutorial will answer some questions and save you some time.
1. Firstly get your external drive (clone) ready. Go to applications---->utilities---->disk utility. Click on your external drive and then partition it. I used 2 partitions, one for mac (200 GB) and one for windows (40 GB). For now partition in GUID partition format (found in options). This is important. You can check whether it actually as in GUID at the end of the format when you click on the drive and on the bottom part of the screen it will give you all the drive information. (NOTE: if you have a standard windows installation you can have 1 partition at this stage and then later let boot camp create a partition for you. Boot camp will only format in FAT, so all windows using NTFS are out of luck).
2. if you ve decided to go for 2 partitions, format the windows partition into FAT or NTFS. If you are using windows 7 (which by the way, is a pretty good effort by microsoft and WAS free to download on beta), anyways if your using a windows which requires NTFS obviously format so. WINXP runs just fine on FAT and is probably the easier option. (This is a note for those formatting on NTFS; sometimes OSX with have some error in formatting NTFS at this stage, God knows why, dont download NTFS 3G or Disk Warrior, nothing will fix it. Just leave it for now and when your finished cloning and ready to install windows, use the XP CD to boot from and then you will be presented with the option of formatting in NTFS. I did this then exited before the actual XP install to get my windows 7 in there. (NOTE: you cannot clone windows installations, ntfs partitions, etc)
3. With your external drive ready. Download carbon copy cloner or super duper. I used super duper. So just choose your internal drive and 'backup all files' to your external. This disk will be bootable. It will not be necessary to use a third hdd to restore to. infact i tried both ways of doing it and both worked just as well as each other. No need for a third drive as some have suggested.
4. Once finished, check out the clone. Restart, just when the mac is starting HOLD down the 'option' key....you will be presented with a list of devices to boot from, choose your external (usb or firewire------> note usb only works for INTEL macs, if your not sure if you have an intel mac. In OSX click on the small black apple on the upper left hand corner of the screen and 'about this mac'....it should say whether its intel or not. Also if your pressing option and you get a padlock wanting a password (like i did), but you dont know the password. Dont worry. Get your OSX installation discs, reboot from those (it will do so automatically). Go to Utilities drop down menu and choose reset firmware password. The other 'reset password' resets the password which would come right before entering into OSX at startup.
5. Anyways, assuming your all good booting from your external drive, check out drive, whether everything is where it should be. if it check outs your good to go.
6. Disassemble macbook to install your clone (not that difficult, get a good youtube tutorial for this like http://www.youtube.com/watch?v=MXqJn465lxs and be careful with disengaging your keyboard cable, otherwise its fairly straight forward. I did this about 6 times trying to get everything right and experimenting with installations. So im pretty blase about it
7. Start up your machine hold OPTION at startup, choose your now internal hdd. Your in. (NOTE: if you reset your firmware password the first time, you will have to do this again with your OSX discs)
8. If you have a standard windows installation you can download boot camp assistant or alternatively it will already be in applications---->utilities---> boot camp assistant. Boot camp will create you a partition and then ask you to put in the windows installation disc, is fairly automated.
9. If you decide to do it manually because you have 2 partitions already. Just restart with your windows cd in there and wait for it to boot, if it doesnt, restart, hold option key. Then just go through the usual windows installation, choose the partition with FAT or NTFS.
10. After all this you will have a working copy of OSX and Windows. I use VMWARE to use windows inside OSX, like a virtual drive. VMWARE has a more straight forward installation then Parallels Desktop (which is apparently faster).... but choose whatever works for you. To look at OSX files through Windows install MACDRIVE and you will be able to view and alter all files as you see fit.
Hopefully this tutorial was of some help. I don t generally read any mac forums so i cant really reply to any questions. I just wanted to post my experience so if someone else out there is searching for answers like i was, then these words will be guide and save you time trawling through numberless webpages......Good luck.

I would approach the situation as follows;
install Acronis, if your new HDD is from Seagate or Western Digital I believe you can download this free from their support sites.
create an Acronis Rescue Disc and when it's created uninstall Acronis as you don't need it any more.
attach external HDD and ODD and boot from the Acronis Rescue Disc
create an image of the current main HDD to the external HDD
remove current HDD from your X61 and insert the new HDD in it's place - this is very important.
boot from Acronis Rescue Disc and recover the image you created to it.
Enjoy your new hard drive.
Alternatively, if you can put your original HDD in the external HDD caddy (connectors are the same) or purchase a 2.5" caddy, you could clone after creating the Acronis Rescue Disc, step by step instructions for cloning can be found here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I need to buy some new hard drives for my Mac Pro

I had an extra internal hard drive in my Mac Pro, a Seagate one, that suddenly stopped working and I needed to send it to a data recovery company, so...
Now I'd like to
- Install a new internal HD
- Install a NAS with two/three disks. (Hitachi if possible, as I have read are the ones that last longer, more reliable than WD and by far more than Seagate).
But to do that I'd like to know how to find out the right type of disks for my computer.
I'd be very gratefull if anyone would tell me where to look it up.
Thank you in advance
In case any of you can help with this, these are the details of my Mac Pro
thanks again
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mac OS X Lion 10.7.5 (11G63b)
2 x 2.66 GHz Dual-Core Intel Xeon
Memory 7GB 667 MHz DDR2 FB-DIMM
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          7 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          Not Available
Hardware UUID:          00000000-0000-1000-8000-0017F20F9F40
+++++++++++++++++++++++++++++++++++++++++++++++++++++
The only HD now
Intel ESB2 AHCI:
Vendor:          Intel
Product:          ESB2 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.10 Supported
ST3250824AS P:
Capacity:          250,06 GB (250.059.350.016 bytes)
Model:          ST3250824AS P
Revision:          3.BQK
Serial Number:                      9ND1P4X7
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209,7 MB (209.715.200 bytes)
BSD Name:          disk0s1
Content:          EFI
HD INTERNO PRINCIPAL:
Capacity:          249,2 GB (249.199.591.424 bytes)
Available:          37,91 GB (37.914.918.912 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650.002.432 bytes)
BSD Name:          disk0s3
Content:          Apple_Boot

NAS is of course external and depends on how you access it. And then t he ideal for RAID5 for instance woudl be WD RED series, but those do not work inside Mac tower.
Look up "TLER" regarding WD drives and RAID.
Apple does not endorse or anything, not in decades and when there were problems - G5 and early adoption of SATA and changing standards and features, it was users that did the troubleshooting.
So unles you are using Apple's PRO RAID card, which I don't think anyone would or should and which is limited to 2TB drives and only instance of a ceiling on supported drives (it is req'd for SAS though), use your own research.

Since installation of a new hard drive on my mac book pro, clicking is now very difficult as I have severe arthritis in my hands. Is it possible to alter the pressure required?

Since having a new hard drive installed on my Mac Book Pro it has become very hard to click since I have severe arthritis in my hands. Is it possible to have the pressure required reduced to make it more comfortable?

I don't think there is any adjustment for that. The battery is under the trackpad. Did you have the HDD replaced at an Apple repair facility?
You may want to ask them to look at it and explain that it is harder press than before, maybe the battery is not nested correctly.
Here is a list of keyboard shortcuts which may help to reduce the amount of clicking that you have to do.
http://support.apple.com/kb/HT1343
All the Best

New hard drive in a Mac Pro - my experience.

After taking delivery of my MacPro I was keen to add an extra hard drive to use in conjunction with amateur level video editing and photo imaging software.
At first I bought a 3.0 Gb/s, 320 GB Seagate 7200.10. and it worked Ok but did not seem any faster than the OEM drive (250 GB Western Digital SE) . XBench confirmed that it was in fact 20% slower overall.
I then consulted this forum and read the many posts re the Seagate firmware problem and other suggestions for suitable hard drives. To be honest it was all great stuff but, for me, a little overwhelming. So today, back went the Seagate in exchange for a 3.0 Gb/s, 250 GB, Maxtor Diamond Max 10 which was all I could afford. I installed the drive, what a dream the MacPro is, partioned it and ran XBench. The Maxtor is 2.5 to 3 times faster than the Seagate and is a quiet drive.
So if you, like me, want a single, affordable fast and quiet drive, the Maxtor does the job. I am sure other drives are just as good if not better but if you find the research confusing, the Maxtor seems to be a safe choice.
Also, congratulations for reading this forum before making a purchase - it saves you the 20% restocking fee for returns!

I want to install another hard drive in my Mac Pro. Just looking for something in the 250GB or smaller range - Western Dig. Maxtor, etc.
I see plenty of SATA 3Gbs drives - what do I look for in terms of specs. The dimensions are listed in the Mac Pro booklet, however, what type of connector is needed or not needed - seems no cables are needed... how many pins, etc.????
Appreciate any help.

After new hard drive, Leopard installed, cannot log in - Help Please!

The local Apple store installed a new hard drive and Leopard on my G5 desktop yesterday. I attempted to restore my applications and documents, using Time Machine from my external G-Drive but am getting the message "you may need to enter the name and password for an administrator on this computer to change the item (Turbo Tax Premier 2007)". I also tried to install the application iWork which I purchased and it too would not let me because it was asking for a password. I typed my old password and user name that I had given to the Apple store (they asked me for it) but it was not accepted or recognized. Should I return to the Apple store and let them do this for me, or is there a reason my password and user name is not being recognized? Also, I do not have the Leopard DVD that they installed from to make any changes or reset the password (I have the original Leopard that I purchased when it became available but hesitate to use it since it caused my Mail App to become corupt which was the reason I went to the Apple Store in the first place as my other Leopard applications and system seemed to be working ok - but when they attempted to reinstall the OS, that's when they called me and said I needed a new hard drive since the attempted installation failed.) Sorry about rambling on, but wanted to give you as much info as possible about my situation and would appreciate any suggestions and help.
Will I have to reinstall all my applications such as Quicken, TurboTax, iLife, ect or should they be restored from my G-Drive? I'm worried about loosing my "documents" as they were created using the older "Appleworks" application; that's why I purchased iWork, to transfer them to.
Thanks again.
Charles

Just thought I'd refresh my recent post to see if any of you current viewers might have a suggestion as how to fix my problem with the "log in". I really appreciate any ideas on this subject.
Thanks,
Charles Adam

How do I reinstall Lion if I get a new hard drive? My mac came with Leopard and I cannot find my upgrade disk for Snow Leopard

My MacBook Pro originally came with Leopard. I have the OS and Applications disks for Leopard but I cannot find my upgrade disk for Snow Leopard. I would like to perform a clean install of Lion on the new hard drive and restore some data from my Time Machine backup. I am not looking to restore the current image to my new hard drive. I have not yet removed the exisiting hard drive nor have I wiped my data.

The only way to do that is to buy a New SL Retail DVD. Or you could buy the Lion Install USB thumb drive from Apple for $69.
You must have SL installed to then install Lion or have a thumb drive with the Lion installer.
You could also create a Lion USB Recovery thumb drive using Lion Disk Assistant. But you need to have Lion already installed and the Lion RecoveryHD Partition on your drive to make the Recovery thumb drive.
Lion Recovery Disk Assistant

New hard drive cant install mac os x

Similar Messages

Maybe you are looking for