New hard drive for macbook pro (late 2009) anti shock or not?

I thought I read somewhere that if you replace a HD in your macbook pro, the new one should not have shock protection as it interferes with the mac's own internal shock sensor.
So I went out and bought a Seagate 7200.4 500GB drive - without the 'G' Suffix - ie the non-shock version of the drive.
I carefully opened my Macbook Pro and was surprised to see the drive in it was a Seagate with a 'G' Suffix!
Does the macbook actually have it's own separate shock sensor?
Is there any published data from apple as to what drives to use for replacement?
Thanks!

Shifty08:
I can speak form experience!
I got messed up 3 times with my Mid 2009 15 inch MB Pro (Some 13 inch units also) with a Seagate 500 GB Sata // 3 gps HD right after the EFI 1.7 update. There may be issue with some other larger 3rd party HDs including WD.
This is my MB Pro present configuration:
+MacBook Pro+
+Model Identifier: MacBookPro5,4+
+Processor Name: Intel Core 2 Duo+
+Processor Speed: 2.53 GHz+
+Number Of Processors: 1+
+Total Number Of Cores: 2+
+L2 Cache: 3 MB+
+Memory: 4 GB+
+Bus Speed: 1.07 GHz+
+Boot ROM Version: MBP53.00AC.B02+
+SMC Version (system): 1.49f2+
This is my present internal HD configuration:
ST9500420ASG:
+Capacity: 465.76 GB+
+Model: ST9500420ASG+
+Revision: 0002SDM1+
The resolution to these issues is now well established and discussed on a different discussion thread.
One has to have Firmware EFI 1.6 installed to avoid the problem. If Firmware EFI 1.7 is installed--back roll it to EFI 1.6. Run the Performance update 1.0.
In order to do this you have to remove the 500 GB 3rd party HD and "back roll" to EFI 1.6 from an external HD. There is a special download for this.
If you have Apple Care or have 3 month coverage for free tech support have the Apple store do it for you. It is about a 20 min routine. Schedule this appointment with the "Genius" through the Apple care. Apple is aware of the issue though some of the Genius staff are not. There is an Apple Engineering bulletin on this. There is a *EFI 1.6 rollback.dmg* file which is on the apple site.
Once this rolled back is in effect, then re-install the 3rd party HD. Then install the Performance Upgrade 1.0--and the MB Pro will work at 1.5 GPS--but this is better than nothing and it does not seem to be an issue for this MB Pro.
Now one likely can install the larger drive in an enclosure and it may work without this modification. I have not done this so I can not confirm this.
I did install the factory supplied 250 GB Hitachi HD in an enclosure and have it working as Universal boot drive.
See below for details.
+1394/USB20 Drive SBP-LUN:+
+Capacity: 232.89 GB+
+Removable Media: Yes+
+BSD Name: disk2+
+Mac OS 9 Drivers: No+
+Partition Map Type: APM (Apple Partition Map)+
+S.M.A.R.T. status: Not Supported+
Volumes:
+Leopard Universal Boot:+
+Capacity: 220.76 GB+
+Available: 171.42 GB+
+Writable: Yes+
+File System: Journaled HFS++
+BSD Name: disk2s3+
+Mount Point: /Volumes/Leopard Universal Boot 2+
This universal boot drive is explained in the Apple KB posting here.
*http://support.apple.com/kb/HT2595*
Best of luck!
bobg

Similar Messages

  • Best portable hard drive for MacBook Pro late 2011

    Looking for a portable hard drive, 1TB USB 2.0 I think.  I googled the model details below and it said it had USB 2.0
    EtreCheck version: 1.9.12 (48)
    Report generated 2 August 2014 10:06:17 BST
    Hardware Information:
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Have never backed up before and not too bothered about it being super fast.  Would like to get one for under £50.  Tried looking myself but getting very confused, USB, FireWire ????
    Can anyone help?

    USB 3 hard drives will work with your MacBook but only at USB 2 speeds. FireWire 800 is your best option for fast data transfers at this point, unless you want to get a new computer.
    Best of luck.

  • New Hard Drive for Macbook Pro.

    Hi,
    My old harddrive completely failed on my Macbook Pro. My new harddrive arrived today, i've fitted it with no issues but thats about it.
    I need to install OSX Lion from the original disk that came with the Macbook. I've tried starting it up from then pressing C after the chime but all I get is a grey screen with the Apple logo.
    Any help would be greatly appreciated and please accept my aologies for my ignorance!
    KR
    Mike

    Be sure your computer is connected to an active Internet connection. Restart the computer without any disc. Immediately upon hearing the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears near the top of the screen. Since you are using Internet Recovery this will take quite some time so be patient. After 12-15 minutes you should see a Recovery screen.
    Install or Reinstall Lion/Mountain Lion from Scratch
    Partition and Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your new internal drive (mfgr.'s ID and size) from the
          left side list. Click on the Partition tab in the DU main window. Set the
          dropdown menu under Partition Scheme to one (1.)
      3. Set the format type to Mac OS Extended (Journaled.) Click on the Partition
          button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Recommended new hard drive for MacBook Pro

    Hi, my mate has a MacBook Pro 2.16 GHz. He wants to upgrade the hard drive to something bigger than the current 5400rpm 120GB.
    Can anyone recommend some of the best drives (or the best) to go with at this point in time?
    I think probably it's worth going for 7200rpm, don't you think? Probably looking for something in the 250-320GB mark.

    Presently the largest drive you can install is the Samsung 500 GB Spinpoint drive. It's the only 500 GB drive that fits in a 15" MBP. It's a 5400 RPM drive with 8 GB cache. Other drives are available up to 320 GBs (they all fit) varying from 5400 RPM to 7200 RPM - some with 8 GB and some with 16 GB caches. Models are available from the main manufacturers such as Seagate, Toshiba, Hitachi, Samsung, Western Digital. You will need to choose between performance and price.
    Good sources for drives are:
    MacSales.com
    Buy.com
    NewEgg.com
    Note that when you buy an OEM drive that vendors do not provide any warranty service. If the drive doesn't work you can get it replaced (right away.) But if the drive fails more than 30 days after purchase then you get your warranty service from the drive's manufacturer. New drives may come with 3 or 5 year warranties from the manufacturer. You will pay extra for the better option.

  • New Hard drive for MacBook Pro 2008

    Hi,
    My 2008 MacBook Pro is really slow and I was told I could update my hard drive on it and upgrade the memory and speed. Does anyone by any chance know which one will work for my laptop??
    It its the fall 2008 model
    Processor: 2.4 GHz Intel Core 2 Duo
    Memory: 2GB 1067 MHz DDR3
    Any information would be really helpful!!
    Thanks
    Leanne

    One more thing, and thanks for your patience:
    Applications > Utilities > System Profiler  (I believe that is where it is located)
    On the left side of the window that opens up will be a section near the top under Hardware that says Memory.
    There will be a section inside memory that says Memory Slots:  Can you copy that?
    Mine (example):
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          8 GB
      Type:          DDR3
      Speed:          1600 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x484D5434314753364D465238432D50422020
      Serial Number:          0x00000000
    BANK 1/DIMM0:
      Size:          8 GB
      Type:          DDR3
      Speed:          1600 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x484D5434314753364D465238432D50422020
      Serial Number:          0x00000000

  • New Hard drive for Macbook Pro 13"

    I purchased a new seagate 500Gb 7200.4 HD, I know I have to format and Im gona do a fresh install should I erase the drive first and zero data even if its a new drive could this help or is it overkill what if the drive is all ready formated also what is a bare drive?

    A 'bare' drive is a drive not in an enclosure. It's what your old drive will be after you remove it from the MBP, and it's what you'll put in to replace it. A bare drive can easily be mounted in any of several kinds of enclosures for more convenient use as an external drive.
    You don't need to sero the new drive before partitioning and formatting it. You do need to partition and format it, because coming from the factory it will be formatted for use only in a Windows PC. Use the GUID partition scheme (a single partition is usually best for your internal drive), and format the partition as Mac OS Extended, Journaled.

  • PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

    Good afternoon.
    I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend.  I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it.  It came with the stock 500 gb 5400 rpm internal hard drive.  At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds.  I am going to buy 16 gb of RAM from Other World Computing to install.
    I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
    I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
    I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
    Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
    But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
    I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014  It's on sale for $94.
    But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
    How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
    Here are my questions about replacing the hard drive:
    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much.  I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
    I would really appreciate any help and advice.  I've never switched out a hard drive before.
    PLEASE HELP !!!  Thanks!
    Here is the "About this Mac" Info:
    Macbook Pro 15-in Mid 2012
    Model Identifier: MacBookPro9,1
    Processor: 2.3 GHz Intel Core i7
    Memory: 4 GB 1600 MHz DDR3
    Software: OS x 10.8.5
    Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled).  This is standard with OS X.
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    There are arguments pro and con.  Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives.  If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time.  But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity.  The jury is still out on this debate.
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    No
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
    The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it.  Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    Not via Snow Leopard on this MBP.  See my response to #4.
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    No.  They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

  • Can I swap the hard drive from MacBook Pro 17 (2009) to MacBook Pro 15 (2006)?

    My MacBook Pro 17 (2009) died. Pushing the power button gets no response. I had had problems with it for some time turning it on, it usually taking many many tries. Plus when I'd try to do a restart after updating software, instead of doing so it'd shut off super quick with a *pop* sound. There was never any of the typical hard drive going bad sounds I've read about and seen in videos. Since it has refused to turn on I've gone through every suggestion I can find to get it to turn back on. Unhook the battery and try starting from just the power cord; the shorting the power pads move; some thing undoing the battery, counting to 10, and then the next steps now escape my memory, but doing more counting to 10 inbetween; unplugging the battery and leaving it sit for 2 days with no power cord plugged in either, then hook it to a power cord and turn it back on; and so many more.
    Also the symptoms just before this fiasco were as follows: I had a CD in the internal drive and was browsing through the images on it via the handy previewer using the space bar. Then I decided to quite, tried ejecting the CD by dragging the icon to the trash, and nothing. I tried again. The same. Then I pushed on the eject key, with the ejct icon popping up on the screen momentarily, but still nothing. Then it appreared as though some things worked and other things were not working. In my frustration I went to the Apple menu and clicked restart with a wince knowing it was going to take forever to turn back on. It did the usual quickly off with a *pop* and made super short lame attempts to turn back on when using the power button. Of course the CD kept trying to spin for a split second and then the little indicator light on the front would go out, then no noise at all.
    Since I do not believe it is the hard drive (of course I could be wrong not being a Mac nerd at all), I was wondering if I can switch the hard drive to my Macbook Pro 15 (2006)?
    I tried this, but it would not read the hard drive. Just a blank grey screen. If it is possible to do this swap, what are the exact steps to do? Please answer like I'm completely illiterate on this, because I really am. I'm super scared of losing everything on the dead MacBook's hard drive. Yeah yeah, I know: then why have I not been backing things up? I had the week prior. Believe me I WILL be doing it daily from now on if I get this mess straightened out!
    Here are the specs for each MacBook Pro:
    Name: MacBook Pro 17 (info gained from the serial on the bottom and then looked up online)
    Model: A1297
    Model Code: mbp_17_early_09
    CPU Type: Intel Core 2 Duo
    CPU Speed: 2.8GHz
    RAM Type: DDR3 PC8500 SODIMM 1066MHz
    RAM Slots: 2
    Max RAM by Slot: 2 x 4GB
    Maximum RAM: 8GB
    RAM Pairing: Modules may be installed individually
    Hard Drive Connection: SATA 300
    Hard Drive Platter Size: 2.5"
    Device Connectivity: USB 2.0, FireWire 800
    Video Output (base graphics option): Mini DisplayPort
    Expansion Slots: ExpressCard/34
    Max Operating System Version: 10.6.8 (I believe that is what was last on the computer)
    Name:    MacBook Pro 15" (retrieved from the System Profiler on this Mac)
      Model Identifier:    MacBookPro2,2
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.33 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    3 GB
      Bus Speed:    667 MHz
      Boot ROM Version:    MBP22.00A5.B07
      SMC Version (system):    1.12f5

    OGELTHORPE really sorry to keep bugging you, but it's obvious you know what you are talking about and I'm stuck on thin ice here getting this fixed, because there are no authorized Apple reps here. I would rather shoot myself for messing up, then to trust someone who "says" they can fix my Mac down here.
    I checked out a company owned by ebay that is the same down here, called MercadoLibre. There are quite a few adapters listed there. I'd like to give you links for some and was wondering if you minded taking a look to tell me if any seem to fit the bill. Some have specs in English, others don't. (Google translater is my friend!)
    #1.  http://articulo.mercadolibre.com.uy/MLU-415826915-adaptador-usb-a-ide-y-sata-con -cables-y-fuente-envio-gratis-_JM
    #2. http://articulo.mercadolibre.com.uy/MLU-416270876-usb-20-to-ide-sata-25-35-hard- drive-_JM#D[S:HOME,L:HISTORY,V:1]
    #3.  http://articulo.mercadolibre.com.uy/MLU-416384859-adaptador-usb-20-a-sataide-_JM
    #4.  http://articulo.mercadolibre.com.uy/MLU-415596152-adaptador-usb-20-para-sata-e-i de-manhattan-_JM
    #5.  http://articulo.mercadolibre.com.uy/MLU-416061182-adaptador-de-usb-a-sata-o-ide- 3525-con-fuente-externa-_JM
    #6. http://articulo.mercadolibre.com.uy/MLU-416061069-convertidor-usb-20-a-sata-hdd- 25-soporta-hasta-1tb-_JM
    These are all cost effective enough that I don't care the price - cheap, expensive - whichever will work the BEST!
    I've also looked for the 7200 rpm HDD, and although I found some, I'll be danged if they are not 3.0, instead of the 2.5 that I have. Grrrr! I was willing to spend the $90 for 1tb... or being the non-techie that I am, can this 3.0 go into my 2006 MBP??
    Just so you can see what all is listed right now:
    http://listado.mercadolibre.com.uy/7200-rpm-hdd-2.5-macbook-pro
    Another newbie question: How do I check what the amount if RAM is presently installed in it? (I might be a greenhorn, but I take pride in not being a dumbie and I learn when taught)
    Right now, I'm willing to spend almost anything. I want a few files that are on the HDD at the moment that I was stupid and did not backup on my external. One file I worked on all day due to the dimensions I had to design it at and each effect took a long time to render. I really don't want to do that one again!.. I'm also willing to spend anything that won't cost me the price of a new iMac. Figure that should be the next one I buy that is affordable, but won't be overworked like the MBP was.
    Once again, thanks much for all of your help!

  • I/O timeout all the time on console - what can I do with my hard drive? Macbook pro late 2011

    My macbook has been extremely slow for a while and after looking on this site I discovered I should look at the console - and noticed I had I/O timeouts all the time which I gather are a problem.
    What can I do with my hard drive? If I back it up using time machine and erase the disk with zeros will the problem continue if I simply restore from time machine?
    Or should I invest in a new hard drive - but if I buy a new hard drive is there something on my computer that will wreck that one as well? i use final cut pro/studio a lot and it's got to the stage where I can barely use it - do I need a 7200rpm hard drive? My current one is a 500gb 5400rpm.
    I have 16gb of RAM in but since upgrading this from 4GB it made a difference to the speed for all of two seconds then the computer returned to its normal slow speed.
    Would appreciate any help on this issue as I'm not particularly technical.

    I wouldn't worry too much about what the Console logs are showing... although I/O timeouts, if related to reading/writing to your disk may be a problem. I would have to see the whole Console message to know for certain...
    Your hard drive is sure to be slowing you down with FCP. Your best bet would be to upgrade to an SSD, if you can afford it. It's the only way you're going to see a real speed increase in FCP as so many large temp/cache files are written to the drive.
    If you can't afford a SSD, you may want to look at a 7200rpm SATA III drive (if your MBP supports SATA III - which model do you have? 2011 or later, I'm assuming, since you note that you've 16GB of RAM?).
    You should also update your OS to 10.7.5 if your profile reading of 10.7.2 is correct. Won't help speed, but will be more reliable -> http://support.apple.com/kb/DL1582.
    Clinton

  • What is the best external hard drives for macbook pro?

    I am looking to buy an external hard drive for my macbook pro urgently.
    I was intending to purchase a time capsule but am really concerned with the reliability concerns of the time capsules where they stop working after 6 months to 18 months as posted on various forums.
    I was considering purchasing a western digital external hard drive but they also receive a lot of negative feedback.
    I have never used firewire previously but am interested in getting feedback as to how useful forum readers find this feature.
    In terms of size am looking for 1TB approx.
    Thanks in advance for your assistance as i need to purchase one immediately and i do not have time to research fully. Make, model number and approximate cost would be very helpful as well as where i could purchase hard drive in london. I am more concerned with quality rather than cost.

    Welcome To  Discussions CJMCJM!
    I have requested that a Host relocate your Topic to a more appropriate Forum.
    As it will be transferred it is not necessary for you to repost elsewhere at this time.
    But for future reference, please review the first entry How To Post A New Topic, on Feedback About Discussions.
    That is the Forum where you erroneously posted your issue.
    Enjoy Your Stay In  Discussions!
    ali b

  • Using time Capsule to replace new hard drive on MacBook Pro?

    I am replacing the internal hard drive on my MacBook pro (early 2008).  I have a time capsule that I would like to use to restore the entire back-up on the time capsule to the new hard drive.  What is the procedure to do this?  Thanks.

    First, prep the new drive:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    Second, install Snow Leopard on the new drive.
    Third, after Snow Leopard starts for the first time you will be in the Setup Assistant. When you complete the registration you will be presented with the options for continuing or restoring from a TM backup or another Mac. Select the TM option and restore your data.

  • Install new hard drive into MacBook Pro?

    I have a MacBook Pro from early 2008 and I've just run out of space on the 200GB hard drive which came with the computer.
    I've read in a few forums that a 1TB hard drive WILL fit in this computer, and in some other forums I've heard that it won't, because it's too big. A terabyte would be ideal as I'm a media student and use this computer for literally everything.
    However, if the Terabyte won't work, I'd be happy to live with the 750GB version of it. I'm looking at the Western Digital Scorpio Blue ones at the moment.
    Now, my question is this; Will my computer be able to handle the new hard drive? Or should I just buy a 1TB external, run everything off that, and just upgrade the RAM?
    I'd also look at getting a cooler mat for my computer if that would help.
    Any help would be greatly appreciated.

    Refer your guy to this:
    http://eshop.macsales.com/item/Western%20Digital/WD10TPVT/
    "Description: 1.0TB WD Scorpio Blue 5200RPM SATA 12.5mm HD with Advanced Format Technology - Fits all Apple MacBook/MacBook Pro 'Unibody' Models (13/15/17"), *MacBook Pro 'pre-unibody' 17",* and PC Laptops which support 12.5mm SATA Drives. New with 3yr WD Warranty. (WDGWD10TPVT)"
    OWC is one of the most reliable online vendors of Mac-related stuff. You can believe that description.
    The confusion arises from the fact that Apple says the height limit for drives in all MBPs is 9.5mm. Obviously Apple doesn't support the use of thicker drives in them, but in fact they do fit and work in some models, as the quote above describes.

  • New Hard Drive in MacBook Pro Early 2011, can't reinstall Mountain Lion.

    My computer started having issues for some reason, it would just restart randomly about every 5-30 minutes. Disk Utility said that the drive needed to be reformatted, so I went into Recovery mode and erased the Hard Drive and then tried to reinstall it and it crashes EVERY SINGLE TIME I try to install it.
    I will say this though, my computer has two hard drives instead of 1. I took out the optical drive and replaced it with a hard drive. For some reason the bootable drive was the optical, so I tried installing it on the main system drive. Well, I can't get Mountain Lion to install on either drive so I went and got a new one, but that one is having problems as well.
    I took the computer into Simply Mac and left it with them to get an estimate on a trade in value and to see if they could Mountain Lion to install. Well they did something, because they got it installed, but my computer is still restarting quite often. I want to install it on the system drive (new hard drive) and then have the other drive for memory storage.
    IF YOU HAVE ANY ANSWERS OR HELPS PLEASE FEEL FREE TO ABSWER. I'll try my best to give you guys all the information you.
    15.4 inch Early 2011 MacBook Pro
    2.2 GHz Quad Core i7
    16 gig Ram
    SSHD 1 TB Hard Drive as main drive
    5400 RPM 1 TH Hard Drive as optical drive
    1 gig dedicated AMD RADEON (7850?)Graphics

    What I am primarily interested in right now is how do I install Mountain Lion on the new Hard Drive. I don't have an Optical Drive in the computer because I put in another Hard Drive for more space in the computer.
    I can't boot from an External Disc Drive, I can from a bootable USB drive, but it crashes everytime.
    Even downloading from the Internet Recovery doesn't work. When it gets nearer to the end of the download, it says that there is 8000 more hours of download time, and then shortly after that it crashes back to the Main Recovery Screen. It won't install it on the new Hard Drive, this is what it does on the USB stick of Mountain Lion.
    Can anyone help me?

  • What is a good hard drive for Macbook Pro 2011?

    My hard drive is pretty much done with
    im looking for a hard drive to instal and the thing is idk which to purchase..
    what type of hard drive should i be looking for for my Macbook Pro LAte 2011 Model with a 500MB
    please inform me what brands and data size are appropriate for my laptop

    juneguz,
    you’ll need a SATA disk (either HDD or SSD) with a 2.5-inch form factor, up to 9.5 mm tall. Your Late 2011 model will support SATA III speeds, so for best performance, choose a SATA III drive. Different people have different preferences here; my own HDD preference would be for Hitachi drives with five-year warranties.

  • What is the best audio production hard drive for macbook pro 13" 2.53 ghz?

    I'm new to mac, this has been a big transition.
    I've been looking on newegg and there are tons of choices.
    Looking for a good hard drive for music production in live 8, 7200 rpm has been recommended. Should it be internal or external?
    I'm making minimalist oldschool synthpop so I don't need too many plugins or tracks at once but I am gigging so I want gear that's simple, I love everything about the apogee duet in this respect.
    I have macbook pro 13" 2.53 ghz 4GB ram
    Apogee Duet
    Ableton live 8 standard

    For internal, you can't go wrong with the Hitachi Travelstar. They work very well with the MacBook Pro and right now you can get 300 GB of 7200 RPM for less than 75 dollars at Newegg. You could try that and see if you really need an external given the type of music you're working with.
    If you decide to get an external, I would steer away from all-purpose drives and get one designed for audio, like the Glyph drives. Along the Apogee Duet simplicity lines, they're designed for music production and they just work. Most of them come with carrying cases. Just plug the Glyph into your MacBook Pro, plug the Duet into the Glyph, and that's it.

Maybe you are looking for

  • DON'T HAVE A HELP TAB IN MY MENU BUTTON. CANT EVEN COPY A URL IN MY ADDRESS BAR OR REFRESH IT ?

    how on earth can you help people when all you do is direct them to another page to click on something that doesn't help. this new version is awful . i cannot even put a url address in my address bar, nor can i refresh the address bar as it won't high

  • IMovie can't find my location

    The guide to iMovie says if the location doesn't come up with the gps button, or you want to add a custom location, then type it into the box. Nope. If you type a custom location in, then it will search it's internal database which is unfortunately a

  • Rendering a blank page not working for multiple xdp's in assembler

    Hi, we are trying to append different .xdp's witht he assembler service to get the resultant .pdf Main xdp :docin.xdp 2nd .xdp : doci2n.xdp there are multiple xdp's that would be combined together with the ddx, the main xdp (pdf from the main .xdp) s

  • SQL query against ConfigMgr DB causing 100% cpu usage on SQL server throughout day

    Hi, I am hoping someone here may have an idea of what I can do to resolve this as I am not much of a SQL guy. Here is what I know. Throughout the day, monday-friday, my ConfigMgr SQL server sits at 98-100% processor usage. Using the following query I

  • AllowInsecureDomain

    Problem opening a browser window from CD production in Flash 8 I am trying to produce a CD in Flash 8 that needs to open some html files. I have tried using 'externalInterface'which works fine on my local machine but not as a CD or on any other machi