New hard drive issues

I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
or,
2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
I think it would be best to:
Install Mac OS
Download updates
Bootcamp and Install Windows 7
What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.

So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
And: http://www.cirrus.com/en/products/cs4207.html
I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
https://discussions.apple.com/thread/2534313

Similar Messages

New hard drive issues - need help please!

So I just installed a new hard drive on my Ideapad S10 and having the following issues. I get a PXE-E61 : Media test failure check cable & PXE-M0F : Exiting Broadcom PXE rom message. I've uninstalled and reinstalled the drive to check the connection and still get the error, it's a brand new drive. Also I noticed in the BIOS that the hard drive is showing up under ssd disk and SATA hdd shows - none. If I restore the BIOS settings to original then the drive will show up under ssd but the SATA controller mode will show the AHCI setting instead of the Compatible setting it should use.
I'm really stuck here and don't know what else to check. My orginal drive is dead so I'm trying to get this working so I can install windows. If anyone could help out it would be greatly appreciated - Thanks!

Full Disclosure: I don't know your machine.
That PXE error probably doesn't indicate a problem - or not the problem, anyway. Your machine boots, doesn't see an operating system on the hard drive (or doesn't see a hard drive at all) and tries to boot over the network and fails. That's what the PXE error is about.
As to the SATA problems, what happens when you boot your Windows install media? Does that see a hard drive?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Leopard re installation on new hard drive issue.

Hello,
Recently my girlfriend and myself took a vacation so we had to bring the Macbook of hers... Unfortunately the laptop fell out of the luggage and landed FLAT on the bottom. Looking at the Macbook we got the dreaded gray question mark of death! I actually am a network engineer at a company and fix many Windows computers so I tried my luck on this, but nothing. I decided to bite the bullet and took it to a local Mac repair shop and they told me the hard drive was destroyed, which I was grateful it was not the motherboard. I bought a 500 GB laptop hard drive to reinstall it myself (How hard can it be right?) and of course I run into the problem I am starting this thread for.
Whenever I put in the OS disk for reinstallation I of course am supposed to hold the Option key or potentially the C key for the disk. Nothing comes up...
I cannot boot to that dang disk to save my life. It is Leopard 10.5.
Being in an IT field for Windows I thought I could hook up the new hard drive with my jig and install the OS that way. Seems I did not know about Macs as I thought I did, as I could not do it.
I was wondering if anyone had the same issue as I am having trying to reinstall Leopard. Kind of didn't want to dish out money for a new Macbook (which we are) yet. Of course if you need anymore information I would be happy to give it. If it is a simple solution you have the right to call me dumb cause I don't care at this point lol. Thanks.
Kurrman

Hi Kurrman,
Is it the original 10.5 Install Disc for this Book, or a Retail Install Disc?
Could the keyboard not be connected properly?

MBP 15" (late 2008) new Hard drive issues in 10.6.8 but not in 10.8.5

I have a 15" Macbook Pro (Late 2008) with an up to date EFI firmware (ver 2.8).
When I went to replace the hard drive (Hitachi 320GB hard wired at 1.5Gb/s) with a new hard drive (Seagate 1TB SSHD).
This new HD runs at 3gb/s or 6gb/s and my MBP which will only do 3GB/s (link speed) DOES select this speed.
Now I've read over 1000 posts (no, really) about this topic of SATA drives in older MBP's but problem is a bit more nuanced.
I partitioned the new HD as follows (disk1-250GB, disk2-250GB, disk3-500GB). I have to do this because I run two versions of OSX.
I run OSX 10.6.8 for mobile audio recording and some post-production video editing and my software runs GREAT in Snow leopard.
Of course, there are some good reasons to have a newer OSX and so I put 10.8.5 on disk2.
On my old HD I had two partitions (disk1-150GB, disk2-170GB) and then used disk utility to copy the old drive to the new.
Here's where my problem is more nuanced. The new drive works AWESOME when running 10.8.5 at 3GB/s.
In 10.6.8, however, I get pinwheels, beachballs, hiccups, etc when running the hard drive at 3Gb/s.
I'll play an aif audio file in Quicktime player and it will stop producing audio, BUT it keeps track of the time. I swap back in my old HD and everything runs fine.
I'm planning in getting a different drive (one that works at 1.5 and 3.0GB/s) but I'd like to keep this drive as it boots up 10.8.5 FAST! In about 15 secs or so. OR, I could just swap out hard drives when I need to use 10.6.8 (which is really easy on my MBP but not preferable) and dedicate the old one for 10.6.8 only.
QUESTION:::::
Does anyone have any idea why the same physical HD would work fine in 10.8.5 but have constant (every 15-20secs) read/write errors in 10.6.8??
The fact that it works great in 10.8.5 has me a bit puzzled of whether or not there's an inherent hardware incompatibility.
Sorry for the long post, just trying to give as much info as possible.

Melophage-
I did try booting from the external SATA enclosure and all was fine; no hiccups. I used disk utility to restore my Snow Leopard partition to a newly purchased HD; a Western Digital 1TB(Mainstream) drive that operates at 1.5 or 3.0 GB/s. I noticed it's power requirement is about 3/4 of the factory drive which is also good.
Amazingly this drive actually works with a link speed of 3GB/s with 10.6.8. And no pinwheels/beachballs.
Possible Conclusions:
My MBP SATA onboard controller is OK with a HD that's 1.5/3.0 GB/s but NOT quite OK with 3.0/6.0GB/s. Although both drives had a link speed of 3.0Gb/s, only the newly purchased "slower" drive worked flawlessly. I'm fine with this being that my Apple factory drive was hard wired at 1.5Gb/sec and its speed was adequate for the audio/video recording I do in 10.6.8. Hopefully it works fine with 10.8.5. Still restoring that partition to the Western Digital drive.
In the end, I have a HD with over 3X the capacity as before and a link speed of 3GB/s.
I may not have the 15sec boot-up time as I did with the hybrid drive, but I won't miss it.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I need help re-installing my OS on a new hard drive. Having MAJOR issues with this simple task.

I have a MacBook Pro 15" (mid 2009) I recently needed to get a new hard drive for it, the old one stopped working. It came with OS X Snow Leopard already installed from Apple, and it also came with the install disks. I have booted up using the install disks and put OS X Snow Leopard back on the computer.
I tried booting with a USB install disk of OS X Lion (10.7) but had no luck on multiple occasions. It would only get through the initial step of the install and then say it couldn't download additional components needed for OS X
So finally, I decided to try a full erase and reformat of my brand new hard drive (less than a week old) and stated with the basic software that came with the computer. Installing that worked fine, until I tried to do a software update through the built in program. My computer refused to download 10.6.8 from the apple servers, so I had to find it on a 3rd party website. Once I found it and downloaded it, I finally got it installed. There were 12 more updates after I did 10.6.8 and none of them worked when I tried downloading and installing as a group. I had to do each one individually, the last one being a security update.
Up to this point, the Mac App Store didn't work (even after the 10.6.8 update), I couldn't download any of my previous purchases. I needed to download lion, to see if having it on the Mac hard drive itself would help with the install, but I couldn't do that until after the security update.
Other than that, the Mac worked normally except for during each start up, the apple logo would flash along with the forbidden sign and the folder with a question mark on it. It flashed for a few seconds randomly, then would boot up normally or say that my computer would need to be restarted.i figured this issue would be fixed after I successfully installed lion.
FINALLY I got the App Store to download lion, and began the install process. Halfway through the install, it failed and when I tried to restart the computer, it continuously flashes through those three symbols at startup. I can't get it to do anything else. I'm so ****** off I'm ready to just sell it for parts.
My questions are:
      1. Can I install OS X Lion OR OS X Mountain Lion clean from the start after a full format of the hard drive?
      2. How do I go about installing clean and get my computer to stop flashing those symbols during start up?
*I have performed the Apple Hardware extended test and all systems are reporting normal function*

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
        - Faulty Hard Drive (even though it is brand new)
         - The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer. The hard drive, issue free, was placed in external drive enclosure. How do I recover iTunes?

I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer. The hard drive, issue free, was placed in external drive enclosure. This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop. How do I recover iTunes?
I'm switching from a 3G phone to a blank 4GS in the process. I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
Thanks

iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

Set up issues with new Hard drive

Hi all,
I bought a new hard rive for my late 2008 aluminium macbook. I've got it booted and had issues restroing from time machine back up using the REcovery partition. Such research showed this is an issue and said I should just use migration assistant or via the usual set up when rebooting my macbook with the new hard drive in.
Unfortunately the keyboard does not seem to be responding well of at all and I get stuck part way through the set up process and cant even get to my desktop now.
Any ideas about what is happening and how to solve this???!!
Many thanks,
Greg

time machine backups are specific to the mac that creates them, since you had the HD replaced the time machine thinks it's a different mac therefore it won't let you "restore" the data to the mac. that is why you have to "migrate" from the time machine backup to restore it.
this is done either using migration assistant or during the setup assistant (whichever applies in this case)
if the wireless keyboard is not connecting properly, i would suggest using a USB keyboard and mouse to get the data restored and then go into settings and figure out why it's not connecting correctly.
following article tells how to migrate from time machine backup:
http://support.apple.com/kb/HT4500
hope all goes well for you!

New Hard Drive for HP DV6 & Recovery Issues

Greetings everyone... Happy Holidays to all!
As luck would have it, on the first day of the Holiday break, my wife's laptop hard drive decided to go on strike - luckily, I could mount the hard drive on another system and get most of the files off that were needed. In replacing the hard drive and doing my research on the web and on these forums, it appears there is a fair amount of disparity between those having success and complete failure when running the recovery disks after a hard drive failure and, thus far, I am in the second camp (not going as smoothly as advertised). As a side note, I created the recovery disks from the system upon receiving it and the disks were verified as part of the creation process as being 'good.'
I am working on an HP Pavillion DV6t, product number XC100AV that originally shipped with a WD Scorpio Blue 640GB drive (WD6400BEVT, 5400 rpm). We have had this system about 13-14 months (just past that 12 month warranty period) and the system is very lightly used (nightly facebook'ing is about as strenuous as this system has worked). Since I have a high degree of experience and confidence in working with computers, I didn't have any reservations in going down to the nearest electronics retailer and picking up a new drive to put into the machine. I picked up a Seagate Momentus XT drive (500GB, 4GB SSD hybrid, 7200 rpm) and put it into the machine in a few minutes, adjusted the BIOS settings to boot from the CD drive and disable the HP Web flash capability, and proceeded to load the CDs through the HP system recovery manager. The system progresses through the recovery manager without incident or error (indicating the recovery disks are 'good'). However, when booting the system after the recovery CDs complete, I get the nice message that no boot file can be found. This tells me that there is no MBR (master boot record) created during the system recovery process and there is no way to boot into the operating system.
Given this information, I have a few questions to those experienced in this area:
1. Am I required to contact HP to purchase a new hard drive to get the recovery to work properly? To put it another way, is there an HP 'tatoo' (as alluded to in other posts around the Internet) that would prevent me from using a HDD that is technically compatible?
2. If the answer(s) to #1 is no, what am I missing in getting the recovery to work properly? Are there any MBR utilities that I should use in addition to the recovery processes outlined by HP?
3. Am I required to purchase the same HDD (size, manufacturer)? I decided to stay away from WD after it failed after only 13 months of light use...
Thank you in advance for your advice!

You're very welcome.
That happened to me too (after testing windows 8), and the only way I was able to get W7 back on my PC was to install XP, and have it format the drive. I let XP install and didn't bother installing any drivers.
I booted from the W7 disk and it worked without incident.
You have to have advanced knowledge to install XP on a modern notebook, because you need to know how to install the necessary sata drivers in order for XP to even see the drive.
I noticed that MS has re-established the W7 ISO file download links again in the last day, so see if you can make your own disk again and try using that to install windows and then try to use the recovery disks if you want.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...

All of my computers have had hard drive issues and I can't authorize the new hard drive. What can I do?

I have itunes on 5 of by 8 computers and 6 of the 8 had hard drive issues.
I was unable to deauthorize any of the computers and now I can't watch or listen to any of the tings I've purchased from the iTunes store.
Help
Tsuki56

Can you not deauthorize all?

Potential Driver Issues with OS Install on New Hard Drive?

I want to upgrade my laptop's hardrive, but my laptop did not come with recovery discs. I did purchase a full copy of Windows 7 Professional, but I have been saving it...for when all else fails, I suppose. Whether I am able to reinstall Win 7 Home or whether I have to install Win 7 Pro, how can I be sure to reinstall all the necessary HP drivers (e.g. trackpad, cool sense, beats audio, etc.) for my machine? Is it best to download the drivers prior to installing the new hard drive and have them ready on a flash drive; or is there an easier method? Thanks.
This question was solved.
View Solution.

Yes that is a very good question.
It's very much advised you do a HDD error check, hard drive test from BIOS and SFC scan lastly.
You can then undergo a disk cleanup and disk defragmentation of the HDD & then proceed with backing up or cloning tools.
I do back up regularly into my 2TB external drive using Macrium reflect, AOMEI back upper and also have all my latest drivers downloaded and copied to another USB along with another bootable USB with Windows OS ISO.
Note: I've already created my recovery media after I setup the laptop first time for additional safety.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Migration Assistant issues and losing files (Mt. Lion on new hard drive)

I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over Leopard and Snow Leopard previously, and did not rewrite the drive before I did that.)
The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
Thoughts appreciated.

I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over Leopard and Snow Leopard previously, and did not rewrite the drive before I did that.)
The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
Thoughts appreciated.

New Hard Drive

After installing Leopard on my new hard drive (Western Digital Caviar Blue) I used Migration Assistant to transfer everything from the original hard drive that was still in the computer. It ran into some issues with 2 iTunes music files and transfer stopped. So I selected the option of continuing to set up. Not sure if I messed up there. After that was complete I trashed the files in question and ran Migration Assistant again, but it completely skipped iTunes and went onto Applications, where once again it ran into problems with Application Support Files from Adobe/InDesign Templates, etc.
Now I'm not sure what to do. The new HD is the 10.5.6 version (didn't run Software Update because I assumed Migration would automatically update everything) and of course the original HD is the 10.5.8. Should I run Software Update first on that followed by Repair Permissions then attempt to transfer everything again? Or should I start from scratch - erase and reinstall then run Migration again?
Also, with having a very large iTunes library is this the best way to transfer those files?
Thanks!

Hi-
Sorry, I may have been a bit obscure....
To be precise, one should boot to the OS X install disc and use Disk Utility to repair the original hard drive and permissions.
You can't repair the boot drive while started to it.
Permissions, yes, but not directory repair.
After that, restart to the usual boot drive, download and install SD!, let SD! do it's thing.
SD! will erase the target drive for the new clone, so using Disk Utility again isn't necessary.
Once SD! is done, you can open System Preferences/Startup drive, and select the new clone as Startup volume.
Restart, and check that all is as it should be (there is no reason that it shouldn't, but DO check).
Once the clone has been verified for function and content, you're all done.
A full clone of a large drive can take a while, so don't do this when you're in a rush.
Maybe start SuperDuper! and go have dinner or something......

New hard drive issues

Similar Messages

Maybe you are looking for