New Hard Drive, New Snow Leopard, WRONG admin name

My brother gave my dad his old macbook pro and I had a brand new hard drive and install of snow leopard done on it, BUT before he sent it out my brother set up a user id under his name to copy a few pictures on to the computer. I really want to GET RID of that admin and set up from scratch for my dad but without having to reinstall (since I just had that done professionally). Is there anyway to do the "setup" process all over without re-installing Snow Leopard.
Thanks for any help

If you've never used target disk mode, I would then transfer by disc. That amount of data through any network will be slow. I would use either DVD's or CD's depending on what type of superdrive is on that older mac.. more than likely it will have to be CD-R's. Once you have the discs go into the "home" folder and copy the "Library" folder (which has the keychain, preferences etc..) you may have to do them in segments since the Library folder can be rather large. So maybe copy in half segments (or whatever you can fit). But I will be honest, (because I deal with this daily) only transfer files, (songs, pictures, and documents) anything else that is coming from an old mac like that.. has no business being on a computer with Snow Leopard on it. They're two different kinds of architectures.. you will only be asking for problems. With a new computer it's best to start with a "clean" OS and only bring the kind of "files" I listed. It will save you from a ton of headaches.

Similar Messages

  • I have Lion as my current and main OS. Is it possible to partition part of my hard drive for Snow Leopard?

    I have Lion as my current and main OS. Is it possible to partition part of my hard drive for Snow Leopard? I'm good on partitioning but when I insert the Snow Leopard install disk a message tells me I can't run the install program because I currently have Lion installed... obviously. Have I gone about this the wrong way? Do I need to boot the computer using the Snow Leopard install disk instead of my main HD?

    Apple will never update that as for the most part it is true, and the fact that they really don't want you to run older OS X versions (for whatever reason).
    Now this probably won't work with the next line of MBPs and MBAs that come out. But it is for the current builds.
    But as I stated you need one of the lastest builds of SL for it to even boot the system.
    It won't work with the retail 10.6.3 DVD disc. That version does not have the correct drivers for the newest Mac's.

  • Can I have mavericks time machine on one partition of a WD  external hard drive and snow leopard data on another

    can I have mavericks time machine on one partition of a WD  external hard drive and snow leopard data on another

    If you want to and it is so large that it has room (350% is a good estimate for TimeMachine), then use a partition(s) to hold system restore images or bootable clones. Or VM images.
    Using SSDs most Mac Pro models can easily hold 6 or more storage devices inside, except the nMP cylinder 6,1's;  which do need external Thunderbolt and USB3.
    System drive / data / scratch / backup data / backups of system / ....
    I recommend a couple system backups, especially when faced with dual boot situations as well as an OS that is still undergoing updates and changes.

  • I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

    I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
    The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
    -Steve

    Booting From Snow Leopard Installer Disc
    1. Insert Snow Leopard Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    Drive Preparation and Installation
    1. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

  • Got a new hard drive for Snow Leopard, but what about all the applications?

    Hi,
    Installing Snow Leopard revealed a faulty hard drive, but Genius Bar got me a new hard drive and installed Snow Leopard and the rest of the Mac Box Set for me.
    I'm putting my computer back together, and I had all my files backed up on a Passport, but what do I do about the applications that I had? I could use a reinstallation of Office for Mac and Final Cut Express. Can I ask the companies directly?
    -James

    JimClive wrote:
    Since I bought my computer, I've moved four times and have probably lost those installation disks. Is there any way I can get or download new ones?
    More reason to back up your +*entire system,+* whether with Time Machine, a "clone" app like CarbonCopyCloner or SuperDuper, and/or some other way.
    You should still retain the original discs, of course, but having a full system backup greatly reduces the chance you'll need them.
    For info on Time Machine, you might want to review the Time Machine Tutorial
    and perhaps browse Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    For info on others, see Kappy's post on Basic Backup, complete with links to the web sites of each product.

  • New Hard Drive and Snow Leopard Upgrade

    I'm getting ready to install a larger hard drive in my MacBook Pro. I am also going to install Snow Leopard. I assume that I just boot from the Snow Leopard disk after I install the new hard drive and it will walk me through the installation. Sorry if this is a dumb question. I'm new to Mac.
    Also, I have copied my files to an external hard drive. However, will I be able to access my old hard drive if I put it in an enclosure. This will give me access in case I missed something.
    Thanks in advance for your help and advice.
    Dave

    I am doing the same thing... an Apple Authorized Repair facility installed my new drive yesterday. They were supposed to create 2 partitions for me, but failed to do so. Instead, they just cloned my old hard drive over to the new one. This really *****, because Spotlight and System Profiler say that my disk capacity is only 200GB and available disk space 40GB (same as original drive).
    What do I need to do to create 2 partitions, one with FAT32 that is 25GB (for both Windows and Chrome OS/Ubuntu) and the other 615GB partition for OS X 10.6?
    The important caveat is that my Samsung Superdrive is dysfunctional, as discussed in this long thread.
    When I now try to use Disk Utility to Partition the drive, I get the error:
    "PARTION FAILED Partition failed with the error: Could not modify partition map because filesystem verification failed"
    And when I try to use Bootcamp Assistant to partition the drive, I get this error:
    "THE DISK CANNOT BE PARTITIONED BECAUSE SOME FILES CANNOT BE MOVED. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    Does this mean that Apple Computer has totally screwed me over? First they gave me a faulty Super drive, and then they install a hard drive without properly formatting the partition? What should I do now?

  • Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

    My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
    How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

    thetrudz wrote:
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
    Hi, and welcome to the forums.
    That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
    Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
    He could do it with Snow Leopard but I am scared.
    If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
    Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
    What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
    See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

  • Restoring a home folder backed up using the Backup application (with the umbrella) to a new hard drive running Snow Leopard

    I was running OS X 10.4 Tiger on a 2006 iMac.  My home folder is backed up on a My Passport 500GB USB external drive using Backup (the original application that came pre-installed with the orange umbrella symbol).
    I was intending to upgrade tp Snow Leopard so that I could sync a new iPad with iTunes and iPhoto so had ordered the disc from Apple and was waiting for it to arrive.
    2 weeks ago my hard drive stopped - and I took the iMac to a support store (I am currently in Belgium and there is no Apple store here).  They confirmed the hard drive was dead and as I had my receipt for Snow Leopard installed this for me.
    Now I am trying to restore my home folder but the new OS does not recognise the data.  I can see there is nearly 200GB of data on the external drive - but the folders contain small files call backup.log, backup.log.gz, InfoPlist.stringscat, stat0.....  all under 5MB.
    Applecare told me they did not know about the Backup application and it was not theirs..... then suggested I tried migration assistant.
    With migration assistant, I just get a spinning wheel at the initial 'select your disk' page - spinning now for more than 8 hours.  I checked on line and the only advice I saw was to use firewire - but my external drive works with the new high speed USB...
    Can anyone help?

    Thank you for your help - I now have a solution  ...in case it helps someone else.....
    ...I also think I may have been a bit silly...
    The solution - thanks to a great guy in Apple Support USA - thank you Matt!!
    first I partitioned my hard drive using disk utility - and set 235GB for a separate install - I called it Tiger install disk
    this allows your hard drive to act as 2 totally separate systems (by holding down the option key when you start the computer you can choose which you want)
    then I reinstalled Tiger from my original discs onto the new part of my hard drive
    then I read my backed up home folder and copied it to the Tiger system on the new hard drive section
    then I rebooted and started up Snow leopard on the original part of the hard drive
    then I used migration assistant to transfer from the 'Tiger install disc' drive - it was recognised by migration assistant
    Where I think I may have been a bit silly
    I am now not sure if the orginal backup was always visible in Snow Leopard
    in Tiger I found backup.sparseimage - which when double clicked opened up my home folder
    now that I have istalled Tiger as well - I can also find this in now Leopard...  ...so maybe I just hadn't opened all the original folders on my backup disk...
    ...but for sure migration assistant could not read the backup copy

  • I'm trying to boot my new iMac running Mavericks from an external hard drive with Snow leopard but it fails with a window telling me to power down manually. It works with my old iMac.

    I have made a bootable copy of OS 10.6.8 onto an external G-drive from my 2007 24" iMac with success. I can't boot up my my new 2013 imac that has Mavericks installed. Any suggestions?

    trey4 wrote:
    I have made a bootable copy of OS 10.6.8 onto an external G-drive from my 2007 24" iMac with success. I can't boot up my my new 2013 imac that has Mavericks installed. Any suggestions?
    Why do you want to run Snow Leopard on your new 2013 iMac with Mavericks?

  • Installing New Hard Drive and Snow Leopard

    I bought a used MacBook Pro with a 100GB drive running Tiger. There's nothing on the drive I want to keep. I have a new 500GB drive that I want to put in the machine and install Snow Leopard. I have no problems physically installing the drive. My question is, when I put the new drive in the computer, do I insert the SL disk before turning on the computer? And will it be an easy install from there? I've done this with Windows, but wasn't sure if the Macs work the same way.

    Just insert the disk shortly after you power up. You may not need to, but hold down c while you are starting. You need to make sure that your disk uses the GUID partition table. After you select your language, look at the menus at the top; select Utilities; and start Disk Utility. Select your drive and make sure it uses GUID. If not, go to Partition and change the partition to GUID. Doing so will format the drive Mac Extended (journaled) (recommended). If not, then you can format again. Just use the quick format option if you need to format. After all of this, quit Disk Utility and continue your installation.
    Message was edited by: donv (The Ghost)

  • Installed new hard drive, loaded Snow Leopard from disk, how to get back to Lion?

    Our 2006 24" iMac, 2.16 C2D (EMC 2111) running the most up to date version of Lion had a hard drive failue. I replaced the hard drive and used the Snow Leopard disk we had to load the OS X. During installation I went through the migration assistant to load our most recent Time Machine backup. It loaded all apps and files just fine, but it did not update the OS to Lion. So, many of our most used applications (Aperture, iTunes) were versions that won't run on Snow Leopard 10.6.8. I thought I could just go to iTunes and view my purchased items and redownload Lion from there, but iTunes version installed from the backup doesn't work with anything less than 10.7. So, I erased the HD, re-installed Snow Leopard and did not use the migration assistant this time. Thinking I could run iTunes and get my Lion purchase downloaded and then resotre from Time Machine. That doesn't appear to be working. I've updated a couple of times, including iTunes, and it doesn't appear that I can find Lion. Would it be in my iTunes library  on my external? I haven't reconnected my external yet as I don't want anything to be modified during this attempt to fix things.
    How do I get Lion re-installed from this point? I paid $29.99 when it first came out. The iMac won't run Mountain Lion, which seems to be available for download.

    Yes, the retail version of Snow Leopard is a full install that can be put on a blank drive.
    Order a Snow Leopard 10.6 install disk for $29 from The Apple Store as long as you have at least 1gb of RAM. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
    Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
    You can now follow the instructions on the install screen
    To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.

  • Can I boot an internal hard drive with snow leopard?

    Hi, I Have an Mid 07 macbook which i'm in the process of upgrading. I have a hard drive that i am up grading from 160gb to 500gb. my problem is i dont have a boot disc, because it's ethier been lost or didn't come with one. my question is can i just format the new hard drive with a copy of snow leopard?

    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled, if supported), then click on the Partition button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.

  • Can't boot from external hard drive with Snow Leopard

    I bought a new Macbook Air with Lion. I have my old Snow Leopard installation cloned onto an external hard drive, and I want to boot from it. I can choose my external hard drive during boot, it shows the Apple logo, but after that the screen goes black and nothing happens. Is there a way to fix this?

    Can't be done.  Snow Leopard does not contain necessary drivers and perhaps other items required for OS X on the 2011 MBA.  In fact, the version of Lion on the App store won't install on the 2011 MBA.
    This is totally normal in Apple's world.  A new version of MAC hardware that comes with a new version of OS X installed usually will not operate correctly with previous versions of OS X.

  • Mac Pro can't find hard drive with Snow Leopard installed on

    Hello there,
    I have a three harddrive setup.
    Harddrive 1 is in bay 1 and has two partitions.
    1: For system and apps
    2: For Documents and stuff
    Hard drive 2+3 are in Bay 2+3 and are combined to a RAID 0 drive.
    Some time ago I installed Leopard and the brand new an formatted hard drive.
    It happened that it always took 2 start ups to run Leopard because always on the first time it didn t find the system on hard drive one. Pushing the 'D' button often helped.
    Of course that was nothing to work with, although I at least could get some work done, once I loaded Leopard successfully.
    So I tried Disk Utility, fsck without success.
    I also tried the way of using fdisk to mark the partion as active, which only resulted in now not being able to boot at all.
    Booting from DVD I also tried choosing my Leopard install on my hard drive as boot device (it has always shown up here) but still without success.
    I am afraid things are quite messed up, since there were a few things happening at one time, which I am not overly happy about now. (Installing new RAM, installing SNOW LEOPARD on the new harddrive 1 in bay one, having still the RAID with LEOPARD on in bays 2+3).
    I am already certain to do a fresh and complete reinstall of the system, I have my backup, but still there is some iTunes music and a few documents I haven't backed up yet, which I'd rather would not like to lose...
    Put it short:
    What could I do to get my system running at least once?
    Thanks a lot,
    max.

    After some research I found out about the nice TargetDiskMode which I used to save all my important data with my MacBook.
    http://support.apple.com/kb/HT1661
    Ready to perform a complete and fresh install now!
    Max.

  • External Hard Drive with Snow Leopard/Windows 7

    I just bought a 500GB external HD that I would like to be able to use with Snow Leopard AND Win 7. I won't be using it for any Time Machine backups. I just want to be able to read/write files on it with both Leopard and Win 7.
    Is there any recommended format procedures in order to be able to do this. I may be wrong, but I don't think I can read/write to my external Time Machine external hard drive with my Windows lap top running Win 7.

    a TM drive must be formatted mac os extended and windows can't even read that without extra software like Mac Drive. It also requires that the partition scheme be GUID which it's most likely not at the moment so repartition the drive with correct partition scheme now if you do decide to use it for TM in the future. also, snow bootcamp drivers once you install them in windows will let you red (but not write) to mac os extended formatted drives.
    the only FS which is natively read+write from both OS X and windows is FAT. but it's very old and has many deficiencies especially on the OS X side.
    but it's good for interoperability.
    or you can format the drive NTFS and use some software like NTFS-3g or NTFS for mac by paragon to make it writable from OS X.
    you may also wish to split the drive in two partitions and format them differently.

Maybe you are looking for