New hard drive not booting osx from external

Hi guys, I currently installed a new hard drive into my macbook, and I tried holding down the alt//option key to try and boot osx from my external hard drive ((Connected through USB)) but nothing happens.  My mouse cursor appears, but nothing shows up.  I tried 5 minutes ago to make sure that I was actually able to boot to my external drive from my old hard drive, and it worked perfectly.  But nothing shows up on this end.  Any help or suggestions?
thanks!

any one have any insight?

Similar Messages

  • New Hard Drive Not Booting Up OSX

    Hi,
    Ive just purchased and installed a new blank hard drive, using "Carbon Copy Cloner" ive cloned the original hard drive to the blank new hard drive. Once the clone is complete i cannot boot up from my new internal hard drive. When i startup i get a finder icon with a question mark inside, I can boot from my old external hard drive but i want to wipe this and have everything running from my new internal HD as it has a much greater capacity.
    Can anyone help with this???

    Welcome to the Apple disucssions.
    For Cabon Copy Cloner to create a bootable drive, the following conditions have to be met:
    1. The target volume cannot be a disk image -- you cannot boot your Macintosh from a disk image.
    2. The source and target volumes must be local volumes -- CCC cannot determine the bootability of a remote volume.
    3. If the Macintosh is a PowerPC Macintosh, the target device must be an internal volume or on a Firewire hard drive.
    4. The files and folders required by Mac OS X must be present on the source volume. These include: /Library, /System, /bin, /etc, /mach_kernel, /private, /sbin, /tmp, /usr, and /var.
    5. The files and folders that are required by Mac OS X must be selected to be copied to the target volume (applicable only to the "Incremental backup of selected items" cloning method).
    6. If the Macintosh is a PowerPC Macintosh, the hard drive on which the target resides must be partitioned using the Apple Partition Map.
    Does your setup meet these requirements?

  • Mac OS X (10.4) Clone To New Hard Drive - Not Booting

    Hello folks,
    I have recently bought an iMac G3 Snow, w/ 500MHz processor. This things works well with Tiger installed, but has quite a noisy hard drive. I wish to replace the hard drive with a newer, faster, and quieter 30GB hard drive that I happen to have spare.
    I had booted the iMac in "Target Disk Mode", fired up my Macbook Pro, and connected the two computers via Firewire. I had then made a successful image of the iMac's HDD using Disk Utility. I then removed and replaced the hard drive in the iMac, and proceeded to restore the image to the new hard drive using Disk Utility again, also via Target Disk Mode.
    Upon successfully restoring the image, I rebooted the iMac, only to find that the iMac cannot find the appropriate boot files. (ie, Question-mark w/ Finder folder logo error).
    Any help to fix this would be muchly appreciated.
    Many thanks,
    Andrew

    Hi Jeff - many thanks for your help. Unfortunately, I am still unable to boot from a clone made with SuperDuper or Carbon Copy Cloner.
    I'm starting to focus my troubleshooting toward the iMac, or hard drive itself. These are my thoughts, if anyone could suggest any other places to poke around for inquiry.
    - the Maxtor 30GB replacement hard drive is being recognised successfully in Target Disk Mode by my Macbook Pro. This shows that the hard drive works correctly, and that the iMac can access all of the data on the hard drive. The hard drive is set to "Master".
    - when creating clone in either SuperDuper, or Carbon Copy Cloner, the clone processes report that the final clone on the new hard drive will be 'bootable'. This is reiterated when I look for the 'information' on the one partition in Disk Utility.
    I have also reset the PRAM and NVRAM and the Open Firmware, to no avail of the hard drive booting into Mac OS X.
    I have looked into my Open Firmware settings to see whether there may be a setting to specifically direct the Mac's bootloader toward the "BootX" file on the hard drive. When querying the 'boot-device', the Open Firmware's response is "hd:,\\:tbxi" - is this the correct function to have?
    When I purchased the iMac, the Tiger 10.4 PPC DVD/CDs were not included with the purchase. I'm trying my best to fix the problem without the discs if at all possible.
    Any suggestions as to where I can go to help my mac boot into Mac OS X again would be muchly appreciated. Thanks.
    - Andrew

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

    hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

    See E-10 in the first link.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • New hard drive not detected.

    Hello all -
    I've spent the better part of the last hour searching this forum, and haven't been able to find a solution, so I hope you folks can help me out...
    After five years of dutiful, uninterrupted service, the original internal hard drive on my G4 QuickSilver 867 finally went kaput. Everything I really need is backed up offsite, so when the Apple Store Genius told me I'd need to start over with a new hard drive, I wasn't really upset. The Genius informed me that they'd be happy to replace my hard drive and get me up and running again for nearly $300, but then leaned over the counter and said that to save a ton of money, I should really just run out to Best Buy, pick up a new ATA hard drive and pop it in there myself. I happily followed his instructions.
    Now I have a new Samsung 80GB ATA hard drive in my machine (set to Master and properly connected), but when I boot to my OSX install DVD, the computer evidently cannot see the new Samsung drive. When it asks for a destination volume on which to install the OS, there are no options available to select.
    In searching the forum, it seems like everyone with a similar problem was trying to 'add' a drive, so I'm not sure the other information applies to me (since I have no OS installed, I can't use Disk Utility). Please note that I'm starting from scratch here... Just one hard drive in the machine, straight out of the box.
    If there's something really simple that I've failed to do, please forgive this novice and lend a hand! Thanks in advance for your help. It is very much appreciated.

    Thanks for the input, Rodney! Unfortunately, I can't seem to figure out how to reformat it. Here's exactly how far I get...
    1.) Boot up the computer to the OS Install DVD.
    2.) Installer asks me what I wish my primary language to be. I select English and hit Continue.
    3.) Installer shows OS description and tells me to hit Continue if I want to install. I click Continue.
    4.) The license agreement comes up and I hit Continue and then Agree to move forward.
    5.) I am asked to select a destination volume for the OSX installation. There are no options to select. The only button I can press is 'Back'. There is an 'Options' button as well, but it is ghosted.
    Any ideas?

  • New hard drive, itunes library on an external drive... why doesn't it see it?

    My internal hard drive died, has to reinstall snow leapard on my older macpro.  Even though I have pointed itunes to the library I want it to use in preferences, the library isn't seen by itunes.  If I click on a song from the external drive, itunes suddenly finds the song and it is sees it.  Is there any other way to do this?  I have way too much music and video files to click on each one...

    Well, I can say that the question is partially solved.... while most of my music library popped up, much of it did not.  The only common denominator I can see is that the music I transferred off of disc may not have transferred over, only the itunes purchases?  I can't see for sure.  I am still trying to figure out how to get the new itunes app on my new hard drive to see everything without me having to click on every file thats missing.  Let this be a lesson to all to back everything up on time machine.  I thought that having my data on a seperate hard drive would be ok.  Seriously wish I had used time machine.

  • HT201250 My macbook pro crashed and I had to install a new hard drive. I restored from Time Machine backup all the files from my old hard drive onto my new one.

    Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!

    If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
    I guess you'll have to erase and start over again now.
    Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
    TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
    With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
    Most commonly used backup methods

  • New hard drive - restore vs. transfer from time machine

    The hard drive in my MacBook went bad and the shop was unable to salvage any of the data. They installed a new hard drive and installed OS 10.5 from the disk I had.
    I have a backup on my TimeMachine device that is probably 2 weeks old and want to restore from that. I was instructed to boot up my MacBook with the TM connected and then do a restore. However, when I do this, I am prompted with a welcome, I pick my language and then it asks me if I want to TRANSFER from a device. I am not given the opportunity to get to the Utilities menu, from which I could do a restore.
    From reading the various posts, it appears that you can get to the Utilities menu if you boot up from the Leopard DVD, but I have an OS installed on my drive already.
    My question is, if I do a "Transfer", as it's being presented to me, will that result in the same state as that of a "restore" from the utilities menu? If not, should I put in the DVD and boot up from that, even though I've got it installed on my hard drive already?
    Thanks,
    Melba

    Yes, tell it you want to Transfer from a Time Machine disk. The word "transfer" can be a bit confusing but it is what you want.
    What you're seeing is essentially the same thing the "Migration Assistant" does (which is in the Utilities folder). Migration Assistant was originally created to let Mac users just "move in" to a new Mac if they buy a new machine. It connects to the "old" machine, finds all the applications, user accounts, and a few other things, and then copies them over to the new machine so that everything is all set up and ready for you to go.
    When they invited Time Machine, they implemented a restore by putting it into the same Migration Assistant. It sees the latest backup on the Time Machine pretty much exactly as if it were looking at the hard drive of another Mac and it's transferring all the info over to your new hard drive.
    Both methods would restore your applications, and ultimately even all your user data. But the advantage of doing it now (vs. letting it finish booting the system and doing it later) is that if you tell it you want to do it later, it'll end up prompting you for your name, etc. and building a user account for you. Then when you try to do a restore via Migration Assistant later (to restore you apps & data) it will complain that an account under that name already exists and to pick another name.
    If you just let it run the migration now it will create your user account exactly as it was from the last backup.

  • New hard drive not appearing in iTunes, can't burn discs

    Just got a new hard drive.  iTunes does not see either of my Superdrives.  Any ideas on how to "connect" iTunes with my drives again, or if that's necessary.  I have checked out the Help info in the app and didn't find an answer.  Thank you!

    Hi:
    What happens when you run the HDD diagnostics test in the BIOS?
    It is doubtful the notebook's HDD will boot with W7 already installed on it from another PC unless it is the same model as yours.
    Quite often that is what you get when you try booting from a HDD from another PC that already has Windows installed on it -- nothing at all.
    Paul

  • New hard drive not working

    I just bought a new hard drive to replace my exhausted 12G HD in my G3 iMac DV graphite. I started up using the original OS 9 disc and the HD was not recognized. I loaded OS9 onto the new HD via fire wire from my G5 successfully, still no joy. So here's the specs: Maxtor Ultra Series 100GB, 7200 rpm, Ultra ATA/133. I got it pretty cheap at Staples. The package info seemed to indicate this would work. If not compatible I guess I can add it to my G5. Thanks in advance. If this is the wrong drive....can I get the specs for what type of HD I should be looking for? Thanks.
    MJC
    G5 and iMac DV Graphite   Mac OS X (10.3.9)  
    G% and iMac DV   Mac OS X (10.3.9)  

    Do the following:
    1, Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    You should now be able to install OS X.

  • Imac has crashed..need new hard drive....had external drive connected...was using time machine.....so...itunes file should be on external drive....how do i import them to my new mac mini?

    my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • New hard drive not showing up in select a destination window of install

    I just installed a 500G hard drive and went to install OS X leopard and the new drive isn't showing up in the destination pane. Do I have to format it first? It shows up under disc utilities. If I have to format it what format should I use there are a few listed (journaled, etc)

    I have had a new hard drive installed. When I go to Disk Utilities and click on Info it shows that it the following:
    Connection Bus: Serial ATA
    Connection ID: Device 0
    Partion Type: ApplePartionScheme
    Total Capcity: 298.1 GB
    Format: Mac OS Extended (journaled)
    However, the drive does not show up to install the OS to. Where do I go from here?
    Sunny

  • HT4718 Installed new hard drive, click on restore from time machine, get to 'select a destination' but just keeps searching for disks.. any help please?

    Installed new hard drive and want to restore from time machine.
    Get as far as 'select a destination'  then it goes no further - just keeps 'searching for disks'
    Help anyone please?

    1. Be sure your drive is attached and mounted.
    2. If you have already written any data to the drive, back it up before proceeding to the next step.
    3. In the Finder, choose Go > Utilities. The /Applications/Utilities folder will open.
    4. Launch Disk Utility.
    5. Click the icon for your external hard drive in the sidebar on the left.
    6. Click the Erase tab along the top of the window.
    7. From the Volume Format menu, choose Mac OS Extended (Journaled).
    8. Enter a name for the external hard drive in the Name field.
    9. Click the Erase button.
    Make Sure that you choose the correct drive

  • New Hard Drive- How to upload from iPod Photo without access to old drive

    Needed to purchase/install a new hard drive after Windows corruption on my old pc. My iPod Photo is completely backed up with my entire library/playlists, etc. Old music files were copied to my new hard drive but the iTunes application needs to be reloaded. I am hoping there is a way to sync my iPod with the new version of iTunes on my new hard drive and have the iPod used as a backup drive. Everything I read about this suggests I need access to my old hard drive to change settings on the iPod before I will be able to upload to the new software from the iPod. Does anyone know if what I want to do is possible so that I can retain all of my playlists, etc the way they are? Thanks so much.

    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using a lot of the utilities your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Vista so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    TuneJack Windows Only
    CopyPod Windows Only
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

Maybe you are looking for