New hard drive replacement on my MacBook Pro.

I bought a new hard drive for my laptop but I do not have the disc to reboot the new hard drive, can someone help me?

Do you know the exact model you have?
You can try booting while holding down Command Option R keys. If you have a more recent machine it'll boot to Internet Recovery.

Similar Messages

I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVDS

I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVD my original os was 10.6.7 now running 10.6.8

Download & install this:
http://support.apple.com/kb/DL1512

TS1591 I have an iPod Nano generation six, and since I had a new hard drive installed in my Macbook Pro, iTunes does not recognize it. I have followed all the troubleshooting tips, many times, and nothing works. My other devices are recognized.

I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.

This is the ipod touch forum

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

New Hard drive installation difficulties in MacBook pro 15"

I have a MacBook Pro 15" mid 2010. I was having difficulties with it getting slow, and the hard drive reaching out of capacity.
I did get the following:
- 2* 204pin, DDR3 1066MHz of 4GB each
- HGST travelStar hard drive 1TB 5400RPM, 8MB cache, SATAIII
I did install both of these without incident. When I try to boot the computer holding the "Option/alt" key, i do get the blank screen asking to choose network and booting disk. However, I only see the DVD drive. When I choose the DVD drive in any case, the computer just gets frozen and I have to reboot again!
Should I try to put back the old hard drive and see if it is a problem with the RAM or new HD? Is there anything else I should be doing?
Thanks!

Addendum to my question:
I did put back the old drive. The RAM memory seems to be working fine. I did put the new hard drive in a case and I was able to access it and format it!
However, when I put the new HD back in, it does not appear on the main screen after I press "option/alt"! And, once again, the computer freezes when I choose the DVD for booting! Why is it freezing? What should I do differently?
Thanks!

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

Trying to instal a new hard drive in my old macbook pro laptop but it wont recognize the disk to install osx

I want to give my old macbook pro away as a gift & bought a 250 GB SATA internal hard drive and installed it, then popped in the osx install disk. When I start it up it begins well, but when it gets to the point to install the software on the drive, the drive simply doesnt show up on the menu to be chosen to instal the software.
The cables are on right and should be working well, so I don't understand why this brand new, never used hard drive doesn't allow the software to mount. Thanks for the help!

jcbarker wrote:
It's a toshiba 250 gb. The place I bought it from said it was, but as I type this, I'm startting to think it's not. Could I simply take it out of the laptop, put it into an enclosure and format it using another mac?
Would that work or is there a better/ different way? Thanks again.
How about an exact model number, there are a lot of 250G Toshiba drives, but even if it is formatted for Windows it should not be necessary to remove it just to format it.
Can you see the drive in Disk Utility? (Applications>Utilities>Disk Utility)

A year ago I had a new hard drive put in my Macbook pro. I cannot log onto the computer to change settings as I do not know the password. The tech said he left it blank, but I have not idea what it is now. Can this be fixed. I have been they only owne

I had the replacement hard drive installed and the tech said he left the password open. My old password does not work. I can use the computer, but I cannot log in to add new wireless devices or to download programs. I recently tried to download Adobe Flash player, and I needed to log in but could not. I can downloan security updated from Apple and the machine will shut down and restart, without me needing to enter a password. I bought this computer from Apple directly in 2007. Is this a case where I need to send it to them since they can verify that I own it, or can I get help with this online or from a local computer tech?

If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
resetpassword
If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

Having problems cloning a new hard drive to install in Macbook Pro 2012

I have a 2009 MBP and I just bought a Crucial 256GB SSD drive. I have cloned it a couple of ways (SuperDuper & CCC) and also tried installing my MBP hybrid drive into the new 2012 MBP. Nothing I have tried has worked. What happens is when I boot I hear a loud beep and then in about 15-20 seconds I get the circle with a cross through it. The original drive in the 2012 MBP works fine but obviously I want all my data from my 2009 MBP + my shiny new SSD drive.
Any ideas?!?

Do this:
Install the drive back to your Macbook 2012. Put your Crucial SSD in a USB enclosure.
Go to your utilities folder and open Migration Assitant and copy the files or apps over using that.
Once you've done that and you can see your files and apps on the 2012 Macbook.
You can now proceed in formatting or erasing your SSD using Disk Utility. Format it MAC OS Extended Journaled.
Open Carbon Copy and start cloning. Source Drive your macbook hard drive. Destination: your SSD.
Now hit clone - you will get a pop up sayingt that a recovery partition is was not created. Create one using Carbon Copy. Once that's done, proceed with the clone.
Once the clone is done, then install your SSD in your 2012 Macbook and everything should now boot up fine.
If you find your boot time is taking too long after you've installed your SSD, go to system preferences - startup disk and select your SSD as the startup, restart and you should be up to speed now.
Good luck and don't do any short cuts - follow these steps so you won't have any issues.

HT2476 I recently had the hard drive replaced on my Macbook Pro; now the app store icon is missing from my dock

When my hard drive was replaced by Apple, I had to re-install iTunes myself. Then I noticed that there was a question mark on my dock where the App Store Icon was supposed to be. I did a software update, and now the question mark is gone. How do I get the App Store Icon back on my dock?

Locate it in the Apps folder and drag it to the dock.

Win7 install does not see new hard drive (640gb Samusung) on MacBook Pro

Replaced MBP 5,4 (mid 2009) hdd with a Samsung HM641JI 640gb drive. OS X installation went fine using SL install disk, updated software to 10.6.4. Problem is with Windows 7 installation using Boot Camp. Partition is created (tried 32 to 300 gb). Windows 7 install disk loads but after "Install now" and accepting license agreement, it does not recognize the drive or any partitions. XP install works fine. Had same Win7 problem with 2 identical hdds and 3 different install disks which were full version, not upgrades. Installed Win7 using boot camp on 320 gb Samsung drive (also 3.0gb/s SATA) without a problem. Tried formatting the bootcamp partition on the 640 gb drive to NTFS, but still not recognized. Any suggestions?

Odd you can't see anything. I'd use Windows 7 recovery tools to do a full initialize and map out bad blocks if necessary. Or initialize from OS X drive and then do full slow format etc from Windows DVD.
Every drive vendor has their own linux/dos/windows utility to recertify and test sectors and does a better job than anyone else's. WD Lifeguard for all my WD drives, can be very handy.

I recently had to have my hard drive replaced on my macbook pro,

when i got it back it doesnt have imovie, iPhoto, or photo booth on it. how do i get thse back without paying for them through the app store?

Did your Mac come with reinstall DVDs? If it did use the Applications DVD to reinstall the iLife Apps.
If your Mac came with either Lion or Mt Lion then logon to the Mac App Store and they will be in your Purchases area.

My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard.

My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

Can anyone enlighten me as to how I can transfer data from an extracted hard drive off of a Macbook Pro onto a new Retina model? No SATA port!!!

Hello,
I'm trying to transfer data from my old hard drive (taken out of Macbook Pro 2009) onto a new Macbook Pro Retina. My ignorance is vast and I purchased an eSATA device to do so, not thinking that there is no SATA port on this new computer. Is there a special cable or anything anyone can recommend? I'd be very grateful for some help here.

I would just get a cheap USB enclosure from OWC, put your old drive in it, and use it it transfer the data to your new rMBP. Cheap and simple. The one I spec'ed is for a USB 3.0 enclosure as you have USB 3.0 ports on your computer - much faster than USB 2.0.
Clinton

New hard drive replacement on my MacBook Pro.

Similar Messages

Maybe you are looking for