New hard drive, trouble starting from disk

I just installed a replacement hard drive. Now when I hold "option" on startup and choose "install disk" (that is the ONLY option), nothing happens... just the apple and spinning flower circle...

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Similar Messages

Cannot get brand new hard drive to work. Disk utility states operation not supported when I try to erase or partition?

Without any success, I cannot get my hard drive to work in disk utilities. I am able to see the disk in the upper left hand column, but when trying to initiliaze the software always reads operation not supported. Any ideas?

You probably have too new a hard disk. Contact the hard disk manufacturer and ask what jumper setting is needed to drop to 1.5 Gbps SATA speed.
Either that, or return the disk, and go to http://www.macsales.com/
They can be sure to equip you with a proper hard disk.
Note formatting is key as well:
http://discussions.apple.com/docs/DOC-3003

New hard drive: Trouble re-installing CS4 Student License.

So, the hard drive in my Macbook died.
I installed a new hard drive and tried unsuccessfully to restore from Time Machine backup several times before giving up and installing a fresh OS Mavericks.
I still have the original discs, however, the optical drive on this machine quit long ago. So far I've been successful dragging applications over from the backup on my external drive, but when I go to open my Adobe software I am getting error messages: InDesign says something about missing Roman.txt, Photoshop says I need to restart, etc.
I'm fairly certain this is linked to serial numbers and the limited student license, but not sure how to fix it.
HALP!
Thanks.

uninstall (if you can), or delete (if you can't uninstall) everything adobe that you 'dragged', clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and properly install adobe programs with the adobe installers.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

New hard drive - wake up from sleep gets "stuck"

My original 80GB drive died, so I replaced my primary hard drive with a new 160GB SATA drive. I just created one big partition and I re-installed OS X 10.3.9 and did all the software updates. The only software installed is Adobe CS2, Flash 8 and MS Office.
Now, any time my iMac goes to sleep, when I wake it up, it gets "stuck" for about 2-3 minutes, then the mouse appears and everything is fine. Why is this happening and how can I fix it?
Stats:
iMac G5 17" 1.6GHz
OS X 10.3.9
160GB SATA
2GB RAM
Nothing external connected (no USB or firewire drives etc).

You did go to System Preferences and open Startup Disk and select your new drive as the startup disk, right?
That shouldn't have anything to do with waking from sleep.

New Hard Drive - Cannot Boot From Install Disc

Hi guys,
I just replaced the hard drive in my macbook and I want to re-install Tiger on the new drive. When i insert the install disc and hold option on startup, the cursor appears but no boot options. When i hold c, nothing happens at all.
When i put the old hdd back in, both the hdd and the install disc appear as boot options, but nothing with the new drive.
Any ideas??
Thanks

Use the original OS X Installer Disc One that came with the computer. Insert it into the optical drive and restart the computer. After the chime press and hold down the "C" key until the spinning gear appears below the dark gray Apple logo. The first thing you must do before installing OS X is to prep the new drive:
Extended Hard Drive Preparation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Once formatting has completed quit DU and return to the installer. Complete the OS X installation.

New hard drive, Leopard upgrade, restore disks needed?

Hi
I have a macbook which shipped with Tiger and ilife 06.
Several months ago I upgraded to Leopard and ilife 08 - both great.
Now I want to upgrade my hard drive to a bigger one, so I just need a bit of advice please.
There is plenty of advice here and on the apple support site about how to upgrade your hard drive, but not when you have upgraded the OS.
The simplest way would be to use CCC to clone it, but I want a clean install. I hope that I don't have to use the restore disks, then upgrade both OSX and ilife - that would be painful!
Anyway, here goes.
I have a SATA enclosure.
What is the best way to proceed? Do I need either of the restore disks that came with the macbook, or do I just need the new Leopard and ilife (retail) upgrade disks?
I am happy with taking the old drive out (after doing a last time machine backup - just in case!) and putting it into the external enclosure and putting the new drive in the macbook.
Then, what is the best way to restore my data? Time machine? Migration assistant? Dragging and dropping everything? (what about preferences & settings?)
Thanks for all your help.

Thanks - do I need the old restore disks that came with the mac at all, or are they just Tiger, ilife 06 and a bit of free software, therefore not needed. I am a little concerned that they contain some drivers etc that i might need.
I have retail disks of Leopard and ilife 08, bought separately.
Thanks
Karl

OS X Mavericks does not recognize my hard drive as start up disk. What can i do? I own an iMac early 2009

I recently downloaded OX Mavericks and run the installer. But at the moment of choosing the start up disk, it didn't allow me to use my internal drive as start up. Any ideas how to fix this issue?
Your comments are most welmcome. Thank you

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

How would you re-install lion onto a crashed or new hard drive with no install disk ?

lets say my hard drive crashed or i bought a new one and wanted to install OS X Lion, due to it being a file you download , would you burn it to a disk or toss it onto a flash drive?

You could use either. There already has been posted information on the procedure: Burning A Lion Boot Disc.
Oh, I should add: it would require a Dual-Layer DVD or an 8 GB USB flash drive. You can also clone it to an external or internal hard drive or partition on a hard drive of around 10 GBs.
Cloning to disk drives should be done using Disk Utility or Carbon Copy Cloner. As of now SuperDuper! is an unknown. Use Disk Utility to burn to a DVD.

New hard drive, reinstall upgrade from CS2 to CS4 Question

Hi,
I upgraded my CS2 to CS4 Extended early this year, my hard drive just bit the dust and I have to re-install the CS4, will I have to call customer service again to get my copy of CS4 Extended activated, again?
Thanks, Charles Grubbs / futurexboy

Like you, I've completely recovered from a hard drive failure - one of two in a RAID 0 arrangement in my case. Windows Backup restored it completely, likewise without re-registration, etc. A key difference is Windows Backup runs for me late at night, in a set-it-and-forget-it fashion (my computers stay on 24/7). I don't have to boot up a separate system to run it.
But I don't doubt Image is a good product.
It's good to have good alternatives to choose from.
-Noel

I got a new hard drive and my recovery disk won't work

I need help with my laptop satellite C650D model no. PSC0YC-02V026
I had to change my hdd and my recovery disk won't work.
When i run the disk i get an error saying that some files can't be read from file or disk.
if i click on the ignore button, i get the same message with a different file.
BOOT64.WIM
BCD
BOOT.SDI
ETFSBOOT
and at the end i get another error message:
Restore Wizard: initrecarea.exe - Application Error
The instruction 0x7656FF26 level refers to the address
0x01D70000 memory. The required data was not placed
memory because of an I / O 0xC000009C standard error.
Error 09-0000-0000
I even try with an windows 7 iso but when it start, i'm being asked for the cd/dvd driver, i download the driver but that didn't work either.

Satellite C650D-02V (PSC0YC-02V026)
When i run the disk i get an error saying that some files can't be read from file or disk..
You can obtain new recovery discs for that Canadian model from Toshiba by calling 800-663-0378.
-Jerry

I'm trying to install a new hard drive on my Touchsmart but the recovery disks won't boot.

The Touchsmart 300-1120 is only 1.5 years old and it's hard drive is already fried. I bought a new hard drive, ordered the recovery disks, and it still won't boot. I've changed the boot order to go from the CD drive first, but all it does is click and then give the same error message it gave when the fired hard drive was in. I checked the diagnostic, and it can see the new hard drive...it just won't boot.

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Pavillion dv7 new hard drive goes to black screen with cursor

A couple weeks ago my computer suddenly started going realy slow so I rebooted, and it wouldnt boot. Just gave me an error in the upper left corner (I dont remember the exact message). Anyway I took it to a family fried who fixes computers he said the hard drive probably had a bad boot sector. We couldnt boot to it, but he could read from it by plugging it into his own computer like an external.
Anyway we got the new hard drive in (upgraded from 320g to 500g) as well as the old one with the intention of making it a slave drive. I tried putting in a windows 7 install disk (originally had vista), when I turn it on first I see the hp splash screen, then it says "windows is loading files" and goes to a "windows is starting" splash screen. After that its just a black screen with an arrow cursor and doesnt appear to be doing anything else.
Any idea what the problem might be? Is it just trying to install to the wrong drive? Or could something more serious be wrong like the processor or motherboard that would mean the whole thing is trash now?

Test your memory
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/How-to-test-RAM-and-HDD-Hard-Drive/td-p/301638

Hard drive not recognized in disk utility

I'm trying to replace the hard drive in my MacBook Pro , the old hard drive was not recognized in disk utilities after the computer crashed .After installing a new hard drive and booting from the original Mac OS install DVD,( leopard?) the new hard drive is not recognized either ? Help

It may be the internal connecting cable that is the problem. If you can install the new HDD in an enclosure, connect it to the MBP, then see if you recognize it using the OSX installation disk. If so, the internal connector should be replaced.
Ciao.

New hard drive, trouble starting from disk

Similar Messages

Maybe you are looking for