New Hard Drive Wiped Out Photoshop and Have Tried Reinstalling but it Hasn't Worked

I have a license for photoshop CS5. I recently had a new hard drive installed on my computer. When it was installed, it wiped my photoshop off. I've tried to re-install with the disk/serial #, but the disk pops out every time I put it in. What can I do here? Any help is greatly appreciated.

download the installer and simply input your serial number during installation:
Download CS5 products

Similar Messages

  • Need advice on new hard drive for Time Machine, and have Firewire questions

    I have an Intel iMac 2.66GHz with 500GB internal drive. I am going to buy an OWC 1TB drive to use for Time Machine.
    I also have an older 160GB external drive with Firewire 400. I'd like to continue using it for extra storage, and would like both the iMac's internal drive and the 160GB external drive to be backed up to the new drive.
    OWC's 1TB drive is available with Firewire 400 & USB 2. For an additional $30, it will also have Firewire 800. If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
    Also, will it make much difference whether I use Firewire 800 or 400 for a drive dedicated to Time Machine?
    Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
    Thanks!
    Message was edited by: Patrick Houlihan

    Patrick Houlihan wrote:
    If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
    I believe it will operate the entire bus at the slowest speed, but can't say for sure.
    Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
    I went with the cheaper, smaller cache OWC drives for my backups on the theory that if caches speed repeated access of the same data, and a backup is always a single-pass stream of non-repeating data, then with a backup the data that goes in the cache doesn't need to be fetched again and therefore the cache isn't much help for backups. I'd love to hear if that's true.
    I didn't answer the one about FireWire 800 for Time Machine because my Time Machine backups are over the network to Time Capsule. However, having a faster Time Machine drive interface should be faster. FireWire 800 certainly speeds things up for non-Time Machine backup software like SuperDuper which I also use.

  • I can connect to the internet and display my iTunes but I am unable to connect to the iTunes store.I am using the latest version of iTunes and have tried reinstalling but the problem still exists.

    I am able to play my music in iTunes but am unable to purchase music from the iTunes store.No connection.The screen is blank.

    Guys Check this Out
    The Solution is There
    https://discussions.apple.com/thread/3275295?tstart=0
    Best wishes : )

  • I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

    I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

    deactivate (help>deactivate) on your old hd.
    then install using the installation file(s) and your serial number.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT1351 I recently had my hard drive wiped out by a virus and had to reinstall windows and itunes. When i hooked up my ipod it didnt automatically sync my songs on my ipod with the library. How do I do this manually?

    I recently had my hard drive wiped out by a virus and had to reinstall windows and itunes. When I hooked up my ipod it did not transfer my songs from my ipod to my itunes library. How do I do this?

    iTunes syncing is generally in one direction only, from the computer's iTunes library to the iPod.  You cannot use iTunes to transfer song files from iPod to computer (except for songs purchsed from the iTunes Store).
    However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like "ipod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once the song files are on your computer's drive, you can add them to your new iTunes library.  (Going forward, you should use a backup strategy, and include your iTunes data in what gets backed up.  Then, you would be able to recover your complete iTunes library, including things like playlists and ratings.)

  • Just got new hard drive installed from apple and my old password doesn't work and it won't let me change it

    just got new hard drive installed from apple and my old password doesn't work and it won't let me change it.cant install anything ,pls help,thx

    Camera works. Now gotta find out about this mic thing

  • HT1329 I've had to replace the hard drive on my PC and have lost all my music apps etc on i tunes. How do I retrieve them ?

    I've had to replace the hard drive on my PC and have lost all of my itunes !!! How can I retrieve the music ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

    If I got a new hard drive on my computer and plugged in the time capsule afterwards, would I be able to recover the information from my old hard drive that was stored on the time capsule prior to the replacement?

    This may be of some help to you...
    http://pondini.org/TM/14.html
    From the FAQs Here...
    http://pondini.org

  • Just put a new hard drive in my IMAC and I bought a lion OS license online so how do i get the software on the imac

    Just put a new hard drive in my IMAC and I bought a lion OS license online so how do i get the software on the imac

    You need at least 10.6.7 installed. If that's the case, since you didn't indicate anything, update to 10.6.8, launch the App Store.app in /Applications, and click on the Redeem link.

  • The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad.  Restrictions are not enabled and when they are those applications are grayed out.  I have tried everything but restoring my iPad to its orginal condition. What do I do?

    The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad.  Restrictions are not enabled and when they are those applications are grayed out.  I have tried everything but restoring my iPad to its orginal condition. What do I do?

    todaywillbegreat wrote:
    '''  I have tried everything but restoring my iPad to its orginal condition. What do I do?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • TextEdit.app is corrupt. I have tried repairing and I have tried reinstalling but it still says You can't open the application TextEdit.app because it may be damaged or incomplete.

    TextEdit is  not working. I have tried repairing and I have tried reinstalling but it still says "You can't open the application TextEdit.app because it may be damaged or incomplete."
    Can anyone give me some other ideas as to how to fix.  Thanks.

    Thats the first thing I tried last night. And reinstalled just textEdit but no luck, then I deleted TextEdit and reinstalled it again and I was still getting the same message.  Tried pacifist this morning again but this time I tried reinstalling the whole apps package half way through its says it cant reinstall due to multiple missing files.
    Tried the repair option on the OS  disc it says everything is fine

  • Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OS X.

    Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OSX 10.10.3. Any suggestions?

    Re: creative cloud hangs at 42%

  • TS1398 help!!!  i am unable to connect to a wifi network and ive tried everything but nothing seems to work!!! can someone help pls

    help!!!  i am unable to connect to a wifi network and ive tried everything but nothing seems to work!!! can someone help pls

    try connecting to another wifi network to isolate the issue. at this point it's impossible to tell if it's your phone or your network

  • I just had to install a new hard drive, windows 7,itunes and outlooks 2010 on laptop and want to import contacts, calendars and photos. it seems sync wants to wipe out my phone with whats on the computer unidirectionally. whats the fix?

    Hi guys newbie here. My HP laptop crashed and i had to install a new hard drive, windows 7, outlook, itunes, etc. i need to get my contacts, calendars and photos off the phone and into Outlook and My Pictures. Syncing seems unidirectional PC -> iphone and i think wants to wipe out the iphone 4s with whats on the laptop - which is nothing. Need help to do this right...

    -Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

  • I have a G5 with a brand new hard drive,when I try and install the os I get a panic we are hanging error. What can I do to load the os

    I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5

    Yes, the hard drive needs to be formatted and OS X must then be installed.
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
    It's only a lost cause when nothing else works.

Maybe you are looking for

  • Pull multiple excel files in a folder into a table.

    Hello, I am using the instructions available in the link below to pull multiple excel files in a folder into a table. http://stackoverflow.com/questions/6190578/how-to-import-excel-files-with-different-names-and-same-schema-into-database  The instruc

  • Getting the time of a particular keyframe

    Hi There, I took a look at the Scripting Guide, but after a cursory search + read couldn't find the answer to my question there, so I thought I would reach out here.  How can I get the time value for a keyframe in any given property?  I know I can it

  • Hosting your IWeb site

    Hi, I want to change my local IWeb site and upload it to a server host....(For example: "http://www.machighway.com") Will I be able to upload files just as they are locally and drop them unto the server? Otherwise, who offers the most affordable mont

  • XL Reporter error - MetaInfo.xml not found

    User encountered following error message when running XL Reporter reports on Excel 2003 running on OS Windows 7 with window administrator rights. However, same XL reports can be generated on Excel 2003 when running on OS Windows XP on another B1 clie

  • Oracle lite with CLOB

    Hello all I have a need to inserts large CLOBS in the Oracle Lite database. However the data goes in fine, but when i retrieve it back, i recieve null. I could see that the data is stored in the database. I use the sun.jdbc.odbc.JdbcOdbcDriver driver