New harddrive in MacBook - restore from time machine not working correctly

Recently put a new Samsung drive into my White 2007 MacBook. I put the snow leopard disk and selected restore from backup onto the newly formatted Samsung drive. After 4 or so hours it says it has completed successfully and the computer needs to re start.
After this the computer boots the apple logo appears and the spinning thingy spins. It stays at this screen and won't go any further. Any ideas?
Should I install a fresh copy of snow leopard first then restore from backup?

Hi William:
Should I install a fresh copy of snow leopard first then restore from backup?
According to this article, yes (the new HD fits the description, I think):
http://support.apple.com/kb/TS3243
Barry

Similar Messages

New MBP set up - restore from time machine

My old MacBook (mid 2007) running Snow Leopard has died. I just got a new MBP Retina running Yosemite.
Now, I have a few question that I googled for answers, but I am confused. I would appreciate any help, guide, orientation.
(1) Will I have problems restoring from Time Machine, created on a Snow Leopard, to a new MBP running Yosemite?
(2) Should I say yes when the set up assistant ask me to "restore from a back up"?
My goal is to have all the files, apps, and configuration from my old Mac into the new one keeping the new OS.
Is that possible?
Thanks in advance for your help.
Vero.

I got "stuck" here:
"For details and instructions, see the appropriate page:
Using Setup Assistant on Mountain Lion or Lion
Using Setup Assistant on Snow Leopard or Leopard
Using Setup Assistant / Migration Assistant on Panther or Tiger"
I have Yosemite, should I follow the instruction for Using Setup Assistant on Mountain Lion or Lion?
I apologize if my question is "dumb" I just don't wanna mess up anything. I also realize my time machine has been created in Lion not Snow Leopard.
Thanks again!

Brand new iMac, Can I restore from Time machine or start new?

My Mac Pro died a month ago so I am replacing it with a 27 Inch iMac. I had a time machine back up on my Mac Pro. When I get my iMac can I restore from the time machine so that I don't have to go through installing all of my programs again or should I start fresh and install everything fr

It's probably "better" to put a fresh install of everything but it certainly isn't the easiest or fastest. I'd say if everythg was running fine at the time of your last TM backup I'd restore from the TM probably using Migration Assistant. Installing and registering a bunch of software can be a pain. I've always used Migration Assistant when I get a new Mac. What happened to the Mac Pro? Is the hard drive still available? You could stick it into an external enclosure and migrate from that.

Restore from Time Machine not recognizing External Drive

Hi all,
I woke up the other day to a black screen and a frozen macbook pro (4 months old). It wouldn't boot up past the gray screen, so I tried to repair the drive with the install disc. It said that there are no errors (liar!), so I wiped it and tried to restore from my latest Time Machine backup (should be the day prior).
However, when trying to restore through the install disks, I only see a backup from April (5 months ago). Even if I try to restore from that one, it says that I don't have enough disk space and won't do anything for me.
Migration assistant in OSX doesn't see my external drive, even though I can access it through finder.
I just want my system back to what it looked like prior to my crash. Shouldnt Time Machine have this capability?
Thank you for any help.

Robin Ryan wrote:
Hi all,
I woke up the other day to a black screen and a frozen macbook pro (4 months old). It wouldn't boot up past the gray screen, so I tried to repair the drive with the install disc. It said that there are no errors (liar!), so I wiped it and tried to restore from my latest Time Machine backup (should be the day prior).
However, when trying to restore through the install disks, I only see a backup from April (5 months ago). Even if I try to restore from that one, it says that I don't have enough disk space and won't do anything for me.
Migration assistant in OSX doesn't see my external drive, even though I can access it through finder.
I just want my system back to what it looked like prior to my crash. Shouldnt Time Machine have this capability?
Thank you for any help.
You should take your question to the Time Machine forum. More experts there on TM than you can ever imagine.
http://discussions.apple.com/forum.jspa?forumID=1342

Restore from Time Machine, not bootable?

I had some problems on my hard drive, so I erased my OS X partition and restored it from a Time Machine backup. Now, the OS X partition will not boot. Does anyone have any suggestions on what I can do?
I do also have a Windows XP partition installed via Boot Camp.
edit: As far as I know, I did not exclude the system folders from my Time Machine backups.
Message was edited by: kjb

Before trying the restore, I had a problem with, for example, System Profiler crashing. I first ran Disk Utility from the boot drive, and when I tried to verify the disk, it suggested running Repair Disk from the install DVD. When I tried to repair the disk, using the Disk Utility on the Snow Leopard DVD, it tried three times to repair the disk before giving up, with "invalid node structure" each time. It then suggested erasing the partition and restoring from a backup; after that, I get the circle with the line through it when trying to boot OS X.

Migration Assistant from Time Machine not working, Migration Assistant from Time Machine not working

Hello,
A friend of mine recently bought a new Macbook Pro. I believe it is a 2.8 Ghz i7 model.
Anyway, they wanted to transfer all of their stuff from a 5 year old Macbook (running Snow Leopard) to their new Macbook Pro (running Lion) and they asked me for help. I suggested they run Migration Assistant from a Time Machine backup. They did that last night and everything ran fine until the very end, when they got this error message "Superdrive firmware Update 2.1 is not compatible with this version of Mac OS X." Also, it appears that nothing had been transfered.
Any suggestions?
Thanks!

Thanks a lot both. The thing was that I couldn't find any DVDs that belonged to my new computer, so I just used my old Leopard DVD thinking that it didn't matter which one I used anyway. When you said it did
matter, however, I looked a little closer and found two DVDs in my new computer's box. I'm doing a clean installation as we speak.
Thank you for your help!

Restore from time capsule not working

Like many others I received this email last week:
Dear iMac owner,
Apple has determined that certain 1TB Seagate hard drives used in 21.5-inch and 27-inch iMac systems may fail. These systems were sold between October 2009 and July 2011.
My imac is backed up every day to my time capsule. When they replaced my hard drive they suggested that since I was using time capsule that i do a complete restore and not copy info from my old hard drive since there was a problem with it. After doing a complete restore I find there are many applications that did not get restored, like iPhoto, Microsoft Excel, Word, Outlook, Photoshop, and many others. I can see individual photos that are in iPhoto, just not the application. When I go into time machine I see none of these programs. Needless to say I am in near panic mode, having no idea how this could happen or how I can get them reinstalled. Your suggestions are greatly appreciated.
Gary in Oregon

You can erase & install the system again, and when finished migrate your data within the setup assistant from the backup volume. With this method the system files are installed fresh from disc and not transferred from the backup.

Restore from Time machine on new 13" Macbook Pro 2.8 i7 after replacing with OWC SSD

I have new 13" Macbook pro with Apple 256SSD. I am replacing with OWC 480GB 6GB SSD because out of space. When I bought machine I used time machine to restore from backup of other macbook pro. I simply held a key on keyboard at startup (dont remember key?) and it appeard to boot from the cloud to a screen where i selected time machine. Will it work the same this time or because I am replacing hard drive i have to create the USB key thing to restore from time machine? ie does apple have the restore from cloud capability only from their own drives?

You should consider restoring or migrating first only data that you absolutely need and want on the SSD. Then restore selectively.
On the latter, and in general on the topic Time Machine, here is good advice.

Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html

During upgrade to Lion on Macbook Pro the upgrade stops at OS utilites after rebooting asking to restore from time machine backup or install new copy

My Daughter is currently upgrading her MacBook Pro to OS X Lion. During the upgrade the system rebooted and then stops at the OS X Utilites menu. I have installed this same upgrade on My MacBook Pro and the family iMAC without issue. Did the upgrade encounter a problem? The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.
I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.
Please help.

I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

After restoring from Time Machine to new Hard drive, system will not boot

I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

Same exact problem here just yesterday, folks.
Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
I only managed to transfer my old disk content by using CarbonCopyCloner.
Having said that, your solution looks uselful, Portland Mac! :
Portland Mac wrote:
... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
But I would not say the following:
Portland Mac wrote:
... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

Struggling to restore from Time Machine (2007 MacBook; Snow Leopard)

The hard drive failed on my 2007 MacBook. I had it replaced and the shop also installed Snow Leopard (this was what I was using prior to the fail).
I tried a restore from Time Machine and while a huge chunk of my new hard drive disappeared, I couldn't locate the files. I have since found them in the hidden /Volumes folder.
I have also learned that to do a full restore, I should have used my Snow Leopard install disk alongside the drive with Time Machine backups.
So...
1. Should I delete the restored file in the /Volumes folder and start again using the Snow Leopard install disk?
2. I want to upgrade to Lion (this is the furthest I can go with this MacBook). Can I do step 1 using a Lion install disk even though the Time Machine backup was created in Snow Leopard? (Confession: I'm not sure where my Snow Leopard disk is and I'm trying to avoid going through cupboards and boxes to find it)
3. is it laborious and risky to try to restore everything manually from the /Volumes folder? Where do I start if I decide on this route?
Thanks in advance for any advice.

I would try recovering the files manually first. If the result is unsatisfactory, then I'd boot up using the Snow Leopard DVD, run Disk Utility/Repair disk, erase and reformat the drive, and then install Snow Leopard. Reboot normally, and use Setup Assistant to restore from Time Machine. Completely update to 10.6.8 and then consider if you want to upgrade to Lion. There are no Lion disks - it is a download.
10.6.8 Combo Updater

Cannot restore from Time Machine or Reinstall - MacBook Pro Yosemite

Hi all,
I recently started using a new Mac (Macbook Pro 15" with Yosemite) about 2 weeks ago. Upon startup it asked whether I wanted to encrypt and I said yes. It then froze for about 30min with the spinny wheel. After the startup was finally complete I used it normally for the next two weeks but the FileVault encryption in Security & Privacy never completed. It was stuck on "encryption paused" and underneath said "Connect to power adapter to continue encryption". Nothing I did fixed the problem. I then did a Time Machine Backup onto a USB with plans to restore from Time Machine. The backup went successfully with no issues. I put the Mac into recovery mode (command+R) and did Restore from Time Machine Backup. It was able to find my Time Machine Backup on the USB, and in the next window "Select a Destination" it found my HD. I clicked restore and there was an immediate error saying that I should restart the computer and try again. From then on in "Select a Destination" it now says "No Time Machine backups were found." This is strange because I already selected the time machine backup and should be looking for a destination now, but regardless nothing can be found.
From there I went to Disk Utility and verified. There didn't appear to be anything wrong. I did repair disk and it didn't seem to do anything.
Then I tried to do a Reinstall OS X. On "Select the disk where you want to install OS X" the only options are my USB with the backup, or "Recovery HD". If I click Recovery HD there is a pop-up saying "This disk is locked." There are no other choices for install, and leaving Recovery mode doesn't appear to be possible.
Does anyone have a solution to this? So far my experience with Yosemite on two different macs has been torture and I do not recommend.
Thanks!

You have a warranty. Take it back and ask the store to fix it for you. You do not need to encrypt the drive, but the Yosemite installation does so automatically unless you select the option not to do so during the install process. You need to look for that carefully. As of now you would need to turn off FV2 to decrypt the drive which takes about as much time as encryption does - quite a while unless you have a small capacity SSD.

HT201250 I recently replaced my 2009 Macbook Pro's hard drive. I had the Apple store upgrade the OS to Mountain Lion while it was being repaired. I want to restore all of my old files and data, if I restore from Time Machine, will it revert to the old O

I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?

No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software

Install new hard drive, restore from Time Machine, File Vault Problems

Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

New harddrive in MacBook - restore from time machine not working correctly

Similar Messages

Maybe you are looking for