New Hardware / DAQmx Install, LabView 7.1 Now Missing DAQmx VI's?

Hello -
I've been running Labview 7.1 and some applications we've built with it for some time now.  Due to an old DAQ board failure, we had to upgrade.  Upon receiving the new (PCI-6225M) DAQ board, we had to update DAQmx (to 8.9.5) in order for this new board to be supported.
In doing so, it appears that the DAQmx VI's I had for Labview 7.1 were actually removed from the system.  When I try to load my 7.1 applications, I get errors saying that it can't find various DAQmx VI's (like the DAQmx Create Task and Read VI's).  Since it allows me to browse for them, I browse to the directory structures that *do* have them now (intended for LV 8.2+, which we don't have).  If I select these VI's they seem to be found okay, but then I get an error for each VI saying that it's only for a newer version of LabView, not v7.1.
So what gives?  What can I do?  Why on earth would a newer DAQmx installer actually go in and remove already existing files from my previous install that previously worked fine?  I am not impressed.  What should have been a simple board upgrade now appears to be setting us back some significant time.
Thanks,
Brett

Hi Dennis,
I also have common issue.  I am using labview 7.1 with DAQmx version 8.8.  Recently, I just bought the cDAQ-9178, which requires me to upgrade my DAQmx to version 9.4.  After installation completed, I discovered all my DAQmx missing.  My question is:
1. Do you have any patch to let me stay @ LV version 7.1 with the new DAQmx 9.5 without missing DAQmx vis?  I need the new DAQmx to be able to connect with cDAQ-9178.
Thanks you for your time, Dylan

Similar Messages

  • Lion install in BootCamp.  Now "Missing Operating System"!  Help!

    Just installed Lion w BootCamp on a white MB and now when I boot to the Win7 side, I get "Missing Operating System".  Any ideas how to fix this? 
    Thanks in advance.

    This is the same problem that I find myself. Help me.
    Este es el mismo problema en el que me encuentro.
    Re: Lion install in BootCamp.  Now "Missing Operating System"!  Help! 
    02-ago-2011 4:49 (in response to William Cochran)
    hey can you tell me how to do that?
    because when I press the option/alt button on the keyboard, there's just two boot source option , because before upgrade into lion, I have windows 7 too in my mac
    There are only two boot option : 1.Macintosh HD , 2.Recovery HD
    I just finished downloading the Bootpicker, and got no idea how to use it to change the boot and getting back my windows 7, I have lots of critical data in there

  • Installing LabVIEW 8.2.1 with DAQmx 8.0 on Suse 10.2 for Linux.

    We recently installed LabVIEW 8.2.1 on Opensuse 10.2 for Linux.  After some work, my advisor was successful at getting the install to work with DAQmx 8.0 and NIKAL 1.5.  I thought I would post the install notes for anyone who finds them useful.  Everything seems functional thus far.
    Jeff Hay
    Attachments:
    installnotes_2007aug13.txt ‏12 KB

    Jeff,
    Thanks for the extremely detailed post.  I have actually been experimenting with this combination of software for the past couple weeks (i.e. OpenSUSE 10.2, DAQmx, LabVIEW 8.2.1).  Your steps match mine very closely.  I did have a one thing to add, and one question about your steps.  First, I just want to mention that NI-KAL 1.6 has been released and it fixes several issues when installing NI-KAL with newer kernels.  This is available at:
    http://joule.ni.com/nidu/cds/view/p/id/850/lang/en
    I would highly recommend using NI-KAL 1.6.
    Second,  I wanted to ask about step #2 where you modify the modpost.c file.  When I ran updateNIDrivers I was not required to make this change.  However I did have to increase the allowable symbol length.  I changed the line:
    #define SZ 500
    to
    #define SZ 1024
    in modpost.c.
    I then proceeded to follow the steps you mentioned and was able to run updateNIDrivers without error.  Could you test to see if changing the allowable symbol length fixed the problem without having to ignore the "parse error in symbol dump file."  I don't exactly know what the read_dump function does but it always makes me nervous to ignore errors.  Since NI-KAL uses modpost to install a kernel module, this failure may be important, although I don't know for sure.
    Once again thanks for your awesome post.
    Regards,
    Neil S.
    Product Support Engineer
    Multifunction Data Acquisition
    National Instruments

  • No Disk-New Hardware Not Installed Successfully .

    I have been trying to get my pictures and videos from my new Samnsung Reality for about a month now and add music to it and everytime I plug the USB in ,it tells me I need a disk .Well I did not receive a disk when buying the phone and apparently without this disk ,it will not install to my computer right .
    I am going out of town a week from today and would really appreciate it if I had music to listen to on my 8 hour drive .And ,my pictures and videos are piling up in my phone and on my card memory .I have never had this problem before with my last two phones from Verizon and didn't have a disk then either ,I don't understand what the problem is this time .
    I also am not finanicially stable to afford any Vcast or Rhapsdy at the moment . 

    That's cool -- I didn't know that there were phone drivers at that link, too. We've been downloading our drivers from http://www.vzam.net/download/download.aspx
    I looked at your link
    http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
    and I think the driver you linked to is not for the Reality but instead for a different model the Rogue u960. Unfortunately I don't see the Reality listed among the Samsung models at http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
    We have the u370 which is basically a re-release of the Reality. There's a link for a driver for the Reality u820 / u370 here: http://www.vzam.net/download/download.aspx
    When you run the file, it will first install the driver:
    "Installing Samsung Mobile USB Driver, this may take a few moments ..."
    Then it will try to install a second component which has *not* been necessary for our needs called VZAccess Manager
    "Welcome to the InstallShield Wizard for VZAccess Manager"
    Just click cancel to cancel the installation of VZAccess Manager.
    Upon the driver being installed, we haven't had any problems transferring files back and forth between the phone and the computer.
    I want to forewarn you about playing music on the Reality / u370. They have a bug which has never been addressed by Verizon or Samsung. There's no problem playing music through the speakerphone or through bluetooth headphones. But many many people including myself have reported that when you plug in either headphones or a headset to listen to the music that the phone will eventually freeze and/or suddenly be unable to be aware that there's a memory card inserted into the phone. If that occurs, you have to turn off the phone then turn it back on. There are some lucky people out there who have not encountered this bug while headphones or a headset are plugged in.

  • NI-DAQmx 8.3.0f0 installed but Found New Hardware Wizard shows up when plugging in a USB-6008

    I have NI-DAQmx Device Driver 8.3.0f0 installed with LabVIEW 8.2 but when I plug in a NI USB-6008 I see the "Found New Hardware Wizard" in Windows XP.  Since the DAQmx driver is installed shouldn't Windows recognize the device immediately?
    I cancel the driver and I get the taskbar message "A problem occurred during hardware installation.  Your device may not work properly."
    The USB-6008 does not appear under Devices and Interfaces in MAX. 
    Help would be appreciated.
    Thanks,
    Dave

    Ahh, I thought Windows performed an automatic search after cancel is clicked. 
    I clicked next and allowed Windows to search and it says:
    "Cannot Start this Hardware"
    There was a problem installing this hardware: USB-6008
    The device cannot start.  (Code 10)
    I tried uninstalling and reinstalling the device but the results were the same.
    Any ideas?

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • 9i migration to new hardware

    does anyone know of a migration guide for moving a 9i database to new hardware?

    Other than
    1) install new hardware,
    2) install Oracle, preferrably 10gR2 since 9i is in extended (expensive) support
    3) export/import OR (if same hardware platform and OS and DB version) copy database (all files) and configure tns files.
    I don't know of a guide, per se. And I could not give details unless you decided to give details.

  • Just Installed Labview, it won't recognize previously loaded DAQmx

    Just Installed LabView 7.0. Previously had Evaluation version working, even using DAQmx.
    Now DAQmx is not recognized by Labview 7.0 (no DAQ assistant express VI at Functions>>Input palette).
    Device Driver CD won't load because it's already there... Should I punt by removing all and reload or what?
    SIDE NOTE:
    Also tried to register this new S/W (purchased from NI last week) but web site (ni.com/register complains that this S/N is already registered... which is not likely as I opened the package myself)

    Try running the Driver CD again to get the DAQmx support for LabVIEW 7.0. It is quite possible that when you uninstalled, eval copy, DAQmx support went away because you don't have LabVIEW anymore.
    Now that you have LV 7.0, run the DAQmx installer to get the support files.
    A Rafiq

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • New Hardware found but not automatically installed.

    Hi there, Could someone please help me I've just bought a 5th gen 80gb and my computer recognises it but doesn't automatically install the hardware. It takes me to the install new hardware wizard and can't automatically do it. So I can't do anything with it.
    5th gen 80gb ipod   Windows XP  

    Hi jenny,
    Ive just tried what u say its not workin' plus I tried my 0404 in my friends computer too it says the same thing "not supported product" when i try 2 install from the cd...
    Im using windows xp sp1 should I try sp2 or go for the technical service (but i was using this card with latest drivers in sp1 like 2 months)
    ps: one interesting thing is when i boot my computer it says creative audigy etc found now, my friends computer says "multimedia audio controller"..
    update (I tried with sp2 its not workin)
    Message Edited by whatudid2me on 10-27-200604:44 PM

  • I had to have a new hard drive installed.  Now programs load slowly and pinwheel spins a lot.  Any suggestions?, I had to have a new hard drive installed.  Now programs load slowly and pinwheel spins a lot.  Any suggestions?

    I had to have a new hard drive installed.  Now programs load slowly and pinwheel spins a lot.  Any suggestions?, I had to have a new hard drive installed.  Now programs load slowly and pinwheel spins a lot.  Any suggestions?

    It's likely that the new drive isn't working, or it wasn't installed correctly, or you had some other hardware fault rather than a bad drive.

  • Authorization issue with new hardware install

    I recently had a motherboard go bad. I replaced the MB and processor and installed the original HD which had survived the failure. After setting up the machine with its new hardware, I turned on Itunes. It asked for a password to authorize the computer. I typed in the password and Itunes became functional but it now says I have three computers authorized when I only have two. Perhaps I should have asked the question before authorizing the same machine twice but I did not realize that that was what I was doing. Is there a way to solve this problem?

    arequai wrote:
    I recently had a motherboard go bad. I replaced the MB and processor and installed the original HD which had survived the failure. After setting up the machine with its new hardware, I turned on Itunes. It asked for a password to authorize the computer. I typed in the password and Itunes became functional but it now says I have three computers authorized when I only have two. Perhaps I should have asked the question before authorizing the same machine twice but I did not realize that that was what I was doing. Is there a way to solve this problem?
    This happens from time to time and nothing we can do to ever predict the outcome with technology in knowing our machines that will be used.
    iTunes Stores allows you to Authorize 5 total machines. Once this 5 is reached if you have access to any of the machines you can de-authorize them.
    What do I do when I no longer have access to this Machine?
    Once a year iTunes Store Support will allow you to reset permissions for all the accounts.
    This is Typically accessed via the following and is available once you reached your 5 machine limit.
    iTunes Menu Bar - Store - View My account - Confirm Password - De-authorize All computers
    This will reset the count to 0. And you can start fresh.
    Personally I would not worry too much about it till you reach 5. Otherwise you got to wait a full year to perform the action again.
    About iTunes Store authorization and de-authorization
    http://support.apple.com/kb/HT1420

  • Installing labview with DAQmx

    I am trying to install labview 2009 on a new
    computer with windows xp but am having some problems. I installed labview and the f3
    patch.Everytime i try to install Ni-Daqmx 9.1 I get an error saying
    that 
    The system cannot read from the specified device
    This
    happens when it tries to install support for  labview 1.13.0. Any
    suggestions on how to rectify this would be helpful
    Thanks
    Priam

    Hi Prima,
    Where are you installing this driver from a DVD or a folder?
    I suggest that you download it from here and run it on your machine from a
    folder on your desktop. It might be a corrupted download or a bad Disc/Drive if
    you are using a Media. You might want to try to copy the disk to your desktop
    and trun it from there as well.
    Thanks and have a great day.
    Esmail Hamdan | Applications Engineering | National
    Instruments  

  • Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.  ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

  • I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

    I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

    If it's the same machine (same CPU) there should not be any need to activate.  The actiovation is tied to your CPU.
    If you run into problems, then:
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Maybe you are looking for