New HD and time machine restore was interrupted. Only half of data transferred.

My HD has been replaced and when backing up from my time machine the transferred got interrupted. When Mac book booted only half the data. So I erased the hard drive to start again although I now can't restore from my time machine  as its saying not enough space on HD to restore. Please help coz I'm freaking out!

Follow these instructions for reinstall 10.6, you will need to erase the ENTIRE drive by selecting the drive makers name and size on the left while booted from the 10.6 disk that came with your machine as this is the machine specific version with your free iLife included.
How to erase and install Snow Leopard 10.6
If you use the white 10.6 disk, (it's 10.6.3) then that doesn't have the free iLife, but if you later purchased it from AppStore it can be redownloaded when you get to 10.8 again.
(ideally that older machine should stick with 10.6.8, but you have your files already in 10.8 on the TM drive, so...)
Make sure you erase the entire drive with the Security Erase Zero All Data option, this will "pre-map" off any potentially failing sectors on the drive before they fail with your data on it, it makes your machine a lot more reliable.
Reducing bad sectors effect on hard drives
Once that's all done, log in and setup with your same user name as before (important) and Software Update to 10.6.8, log into AppStore and hold the option key down and click on Purchases, redownload 10.8 and install.
Revisit and redownload other software like iLife etc.
Use the TM drive to bring back copies of your files into their respective folders.
Reboot the Mac holding the command and r keys down, use Terminal and enter resetpassword, a window appears, select your boot volume and user, then reset ACL's, should fix your user permissions issue.
Note: What the AppleStore should have done is installed the 10.8 Recovery HD on your new drive, then you could have just reinstalled 10.8 from that.

Similar Messages

  • Drobo NAS and Time Machine restore problems

    My HDD crashed.  I installed a new one.  Reinstalled OSX Mavericks and tried a Migration Assistant from a DROBO 5N NAS (holding the Time Machine sparse.bundles).  Profiles reinstalled, no data, no applications.  Weird.  I have tried Drobo, I have tried Apple consultant - recommended by Apple's support website.  No success in getting the restore to take place with Apple software.  Wondering if I can do this file by file.  I really only care about the 1TB of movies, music, photos I have on iTunes and Aperture backups inside of the sparse.bundle files.  Everything else I can reload.  Please help.  I have been down since July 15 on my home theater and photo library.  Need to get this up and running ASAP.  Everything looks OK on the backup file.  When I try to simply copy the data files to my new HDD I get the dreaded OSX file copy error after about 200GB - which takes an incredibly long amount of time on my wireless home network (about 5 hours).  Really need an expert to help out on this one.  Please let me know if you can. 
    Thanks,
    GJM120

    Hi Bret,
    You state it's running 10.5.8 but that it's only 9 months old; those two don't match up. If it is only 9 months old, bring it in to an Apple Store ("genius" bar appointment) and have them check it over. It sounds like it may be a HD issue to me.

  • Will Time Machine restore software problems as well as data?

    Hi all -
    I've got a 20" aluminum (2007) iMac with Leopard (all updates installed) and Time Machine. I'm having a shutdown problem that I'm trying to resolve. Yesterday, the computer started powering itself off randomly, as if someone pulled the power plug. I ran both the quick and extended Apple Hardware Tests, and both came up clean (no errors). I'm thinking this may be a software problem.
    I'd like to reload Leopard to clean up the software. However, I already tried doing a Restore via Time Machine yesterday, and the problem did not go away. I restored to the previous day - prior to when the shut downs started happening.
    My question is - If I reload Leopard using the "Restore" feature of Time Machine, does that also copy any problems I had backed up in software to the reloaded system? My guess is yes, since all of my applications remain intact after the Time Machine Restore.
    That said, I find Time Machine to be absolutely brilliant in its simplicity and functionality, and think it should be in every single computer user's hands.
    At any rate, I'm fearing that I'm going to have to do a clean install and then reinstall all of my software manually to get a truly clean system, then restore data manually via my Time Machine backup. I hope I'm wrong.
    Can anybody shed some light? Thanks,
    Shelly

    it really does back up almost everything, even broken files. Go back to the initial backup and restore from that. If that doesn't fix it, you've got hardware problems.
    Crashes are one thing, hangs another, but actual shutdowns where the computer just goes completely off really indicate hardware problems. Software by itself won't do that, even if it's broken.
    - gws

  • Old FileVault crashed my MacBook Pro, had to delete, reinstall and Time Machine restore failed. Trying to manually rebuild. No iPhoto pics, no iTunes music and NO DOCUMENTS found! Any thoughts?

    Here's the ordeal. I'm running a 2007 MacBook Pro 17 inch with Lion OS. When I converted to Lion, I didn't have enough room on my harddrive to convert to the new FileVault, so I remained on the old system. Less than a week ago I reboot my computer because iPhoto seems to be stuck on "cataloging" my photos, though after days of letting it run, it doesn't do anything. After the reboot, my computer appears as if it had been reset to factory settings with all my programs gone, etc. I'm like, hey, I've got Time Machine, I'll restore it. After the restore is run, when I go to login, I get the dreadful error message, "You are unable to log into the FileVault user "John" at this time. Logging into the account failed because an error occurred". I searched the internet via my iPhone for suggestions and followed everyone of them, all the way down to erasing my harddrive and reinstalling Lion. So I get back into my computer and think I'm golden. I go to restore my computer via Time Machine and wham....I'm right back to that error message. I think, ok, I'll do it again. This time it messes us even more, giving me two login screens, one for the new Lion like before I restored the computer and then a second, as if it were restored, but unable to login. On top of that, I couldn't get back to the Command-R page! I thought I was really screwed! Well, I finally figured a way back, or maybe it was just that it finally decided to cooperate, I don't know, but I erased my harddrive again, and reinstalled again and thought, well, I'll rebuild manually by selecting what I want to restore from the Time Machine drive. I was able to get all my applications back and running, but to my dismay, I seemingly have lost all my iTunes music (except that which Apple has graciously setup to redownload now "thank you!) plus all my iPhoto's and even worse, all my DOCUMENTS!!!! Here I thought Time Machine from backing all this stuff up, but with over a years worth of back-ups I cannot locate any photos, music, or my documents on my drive to extract! Needless to say, I will never be using Time Machine again to back up my computer, I'll find another program or at least do it all manually. But my question is: am I looking in the wrong places for this files? Are they hidden under some unknowning folder that doesn't list it as music, photos or files? I can manage with the music, I can live with the photos because my wife has many of them on her computer and I have many uploaded to Facebook, but my files! My documents, thousands of them, many with information I won't be able to compile again, seemingly gone unless someone out there has any ideas?!!!
    I even had iPhoto search the drive for photos and after hours of the barber shop pole spinning I cancelled the command for I figured it wasn't going to find anything.
    If anyone has any suggestions, or if Apple, you are reading this and can provide some direction, I would greatly appreciate it.

    Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
    That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
    ... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
    If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
    Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

  • New MBP and Time Machine won't let me search out my NAS to save too. Any ideas?

    When trying to set up time machine and using a NAS drive in my wireless network Time Machine won't let me search and select the storage device. I can access the storage and save/retrieve files so I can see and use it. Anyone got any ideas please?
    Brand New MBP running Mavericks.

    I'm having the same issue with Mavericks - and it appears to be Mavericks specific. I don't have this problem with Mountain Lion. Mountain Lion can see both of my NAS drives.
    Additionally, with Mavericks Time Machine won't see your backup properly. It may only see the most recent backup. Though in my case it wouldn't load either one (I had two on different drives). To recover some files I had to use a machine running Mountain Lion to mount a backup file then I was able to extract the files to a USB drive, which I then moved to the Mavericks machine.
    I've tried using terminal to run tmutil commands without luck. I have mounted the volume I want to use - it shows when I do "ls -l /Volumes". Then when I do sudo tmutil setdestination /Volumes/VOLUMENAME the system seems to go into an infinite loop. I have to ^c to get back to terminal.
    Clearly with Time Machine on Mavericke Apple has really screwed the pooch.
    MacBook Pro 2.3GHz i7 with DVD drive and standard resolution display.

  • Ridiculous & grotesque HD crash and Time Machine restore failure!  Help?

    Trying to make this short. iMac 24" 2009 2.66GHz, 640GB HD, NVIDIA 9400, 4GB ram.
    Bought used, installed operating sys from disks, then upgraded to Snow Leopard. All was working fine. Set up Time Machine and it made several backups over two days.
    Tonight, for reasons unknown, came into office and screen was on (instead of asleep or screen saver) and fan going 1000 MPH--LOUD!
    Cut it off, rebooted, would not boot. Gave me "No bootable device" msg. Booted with OSX 10.5 disk, did UTILITIES/RESTORE FROM BACKUP, restored from Time Machine.
    When it rebooted, the gray apple showed up and seconds late a gray shade descended and a black box in center of screen says "You need to restart your computer. Hold down power button until it's off, then press powerbutton again." Says this in 5 languages.
    So I did, and the box keeps coming back. Repeatedly.
    So then I reboot from OSX 10.5 disk again, go to UTILITIES/RESTORE FROM BACKUP, and restore from ANOTHER Time Machine backup from the iMac 24" I'm replacing, also Snow Leopard updated.
    Same result. Black box, "You need to reboot," etc.
    ***? Am I missing a key step in the full restore? Please advise ASAP as this is driving me batty. not only do I not know what went wrong in the first place (somewhere early on I ran disk utility and did all 4 of the repair/verify options there; all said HD was fine), I have no clue why Time Machine won't restore like I assume it's supposed to!
    Please help me before I kill again!

    BeerBellyBilly wrote:
    My Mac wouldn't boot. Since I had my trusty Time Machine Backup I formatted the drive and tried to use Migration Assistant to use Time Machine Backup to restore everything but when I tried the backup had an error. Is there anything I can do to restore my mac?
    You do not use migration assistant to restore from a TM drive.
    You boot into your Leopard DVD and use it to restore from TM drive.
    You do not need to do anything with your internal drive. Just follow the instructions.

  • 40gb free space appeared after clean install of Mac OS X and time machine restore? What happened?

    Recently, my computer had a display problem, and I brought it in to the Apple store to get it fixed. When they returned it, they had replaced not only the display but also the logic board, and the hard drive, and they did a clean install of the operating system. After OS X was clean installed onto my computer, I restored my files from Time Machine, but my hard drive now shows about 40 gigs more free space than I had before, when I originally brought my computer in. All my files seem to be in place. What am I missing? I was guessing that the cache of my web browsers have been cleared... But 40 Gigs seems like a lot of space to recover solely through clearing the web cache. Any ideas?

    Hi, one question & one suggestion...
    What possible things are connected at home but not at the store, inlude every cable, etc.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • New MBP and Time Machine

    I have an iMac and I use Time Machine to backup to a 1TB WD Studio II.
    Tomorrow I take delivery of a new 13" MacBook Pro.
    If I set this new Mac to backup using Time Machine as well as my iMac will it integrate itself into my existing iMac TM backup, or will I need to erase the current iMac TM backup and start again?
    The iMac has a 750GB HDD with about 500gb free space remaining. The MBP will have the smaller option of the internal HDDs (250GB?) available for it. The WD Studio II is set to RAID 1 mirrored.

    It depends on the space available, and how you answer the "re-use" prompt, per #B5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    Is this an additional Mac, or a replacement?
    If it's an additional Mac, select +Create New Backup,+ so you can continue to back up both Macs.
    If it's a replacement, select +Reuse Backup.+

  • Initial Time machine backup was interrupted

    I interrupted my initial Time Machine backup.  How do I reinstate the initial backup?

    Turn off TM, erase the external with Disk Utility, turn on TM and re-select the external HD.

  • Mavericks - clean install with filevault and Time machine restore

    Hi All,
    I will update my MacBook pro mid 2011 with the new Mavericks OS.
    I've activated Filevault on my HDD due to corporate security rules.
    I want to make a clean install of the new OS.
    I plan the following action:
    1 - Make a full backup with Time machine
    2 - Create a USB drive with Mavericks on it, I'm using Diskmaker to create it
    3 - Start MBP with the USB
    4 - With disk utility erase my HDD
    5 - Install Mavericks
    6 - Reload my data from the Time machine Backup
    Question:
    I'm a bit Scare about the Time Machine backup and Filevault, any experience with the same configuration, do I risk anythink if I follow my plan ?
    Do I need to desactivated Filevault before to lunch my clean install and make the backup after that ?
    Thanks in advance for your feedback
    Regards
    Alain M.

    Hi Alain,
    I see you never got a reply to this, but I'm wondering what you finally did? I have very similar questions, but I'm "upgrading" from 10.6.8 Snow Leopard. I also have FileVault activated and use a Time Machine backup. Any comments/suggestions/experience you (or others) would like to share would be helpful.
    Thanks

  • How to recreate Mavericks OS X Recovery partition on Macintosh HD after HDD replacement and Time Machine restore?

    Replaced my HDD in my Mac Mini.  Restored Mavericks from Time Machine Backup.  OS X Recovery partition is missing.  How can I recreate the OS X Recovery partition on my HDD?

    It actually did restore.  Thanks!  disk1 is the disk replaced and I see the recovery partition.  It just doesn't display in the GUI Disk Utility.
    $ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD 2          499.8 GB   disk0s2
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:                  Apple_HFS Macintosh HD            252.4 GB   disk1s2
      3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *320.1 GB   disk2
       1:                        EFI EFI                     209.7 MB   disk2s1
       2:                  Apple_HFS MyBook 320GB            319.7 GB   disk2s2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk3
       1:                        EFI EFI                     209.7 MB   disk3s1
       2:                  Apple_HFS Time Machine Backups    2.0 TB     disk3s2
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk4
       1:                        EFI EFI                     209.7 MB   disk4s1
       2:                  Apple_HFS GOFLEX500GB             499.8 GB   disk4s2

  • How to handle migrating files to a new drive and Time Machine

    I have recently moved to an SSD in my Mac Pro.  As such, I am going from a 2TB main drive to 256GB.  This is no problem, as the majority of my 700GB of files are old work and don't need to live on the speed of the SSD.  My plan is to leave them on the 2TB, which will no longer be the boot drive.  However, what will become of my Time Machine backups?  If I leave the HDD directory structure the same, I presume it will keep the backups of my files.  However, this means everything that I moved over to my SSD won't have any backup history.  In addition, if I rename the HDD, or restruct it, then I will lose everything.

    You nedd the Install Disc 1st.
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html

  • Cannot sync my iphone to imac after new hard drive install and time machine restore. Does not see device

    Had a new hard drive installed
    IMAC does not see iphone therefore cannot sync

    Did you already try these suggetions?
    iOS: Device not recognized in iTunes for Mac OS X

  • I got a new laptop and when I sync my itouch only purchased music where transferred to my iTunes

    When I tried to sync only music purchased through Itunes was transferred.  All the music from CDs where not!.  I couldn't backed up my itouch because my old computer crashed.  And now my itouch has only about 200 songs which is not even the same numbers of songs that i have in my purchased itunes. 
    There is one thing though!  WHen I connect my itouch, and see the music folder, I can see all my songs.  DOes that mean that they are not totally lost and that i can recover them?  If so, how?
    Pleaseeee I need help.

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My Macbook Pro was stolen, and I have replaced it with a Macbook Air. New hard drive is too small for a Time Machine restore. How do I restore my more-expensive apps (ie iWorks) on my new Macbook without repurchasing them?

    My Macbook Pro was recently stolen, and I have replaced it with a Macbook Air. I attempted to simply do a restore from the Macbook Pro's Time Machine backup, but since the new Macbook Air's hard drive is significantly smaller, a Time Machine restore was not possible. I even tried to choose only settings or only my User Profile (option) when restoring, but the backup was still too large to do a restore onto the new machine. How do I restore my more-expensive apps (ie iWorks) onto my new Macbook without repurchasing them? Also, I reaad somewhere that if you went to the Mac App Store and attempted to repurchase the app and clicked BUY, it would simply alert you that you have already purchased the app (and trigger a re-download)... NOT THE CASE... So I just dropped another $19.99 for a second copy of Pages... Not my intention....
    Any help would be greatly appreciated.
    LM

    you should get a usb backup drive as well.  time machine has limited use in my eyes. it saves things. but older things can be errased ad space drops without telling you
    nothing beats data redundancy.  2 saves is. 1.    and 1 is none
    im personally not fond of time machne though i use it only for a recovery parameter for a mac
    id never ever myself consider time machine a genuine data backup tool.  though most do consider it as such
    drive clones such as superduper and carbon copy cloner can clone your entire drive for emergency recovery.  and you can boot from them as well o. another mac

Maybe you are looking for