NEW HD BOX

My father in law just recieved his new HD box. There is no RF socket at the back. How can he watch sky on othere TV's in his house. Thanks

Check first in the tv manual that it actually has an analogue tuner. If it doesn't, no amount of tuning will help!
How you tune in to the Sky signal varies from one tv to another. You'll need the setup menu, then look for a scan for channels option or something similar in the tuning section. Some tvs give you the option to include analogue channels in the scan or not. If so, select to include them. Other TVs require you to be watching analogue tv (ATV) before going to the setup menu to do the scan.You can usually select ATV from the input/source button on your tv remote. Sometimes there's a button on the remote labelled ATV/DTV. If in doubt,check the user manual.

Similar Messages

  • E mail. I can not send email to a contact from my list. When I hit their email address, the new message box comes up but the send icon is not highlighted and I can not send it. Why? How do I fix it. Happens on both I pad Air 2 and I Phone 5

    WWhen I press the email of a contact, the new message box appears with the address but the send icon is not highlighted. Even after typing a message, I can not send it. This is on both I Phone 5 and I Pad Air 2. this just started and not sure what I did. Help please?

    Read this thread, it's a bug that many are experiencing:
    Cannot send emails from contacts

  • I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

    I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

    Another View.
    the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

  • Lightroom 5.4 backup hangs upon finish, relaunches new dialog box

    Is this a bug? I have a recurring Lightroom 5.4 issue on quitting. I have it set up to backup catalog every week upon exit. When the time comes each week, the backup proceeds, but doesn't end -- it just hangs while a new, second dialog box asking to backup once again appears. Lightroom will not quit until i click on this new dialog box -- this happens each time I backup, no matter what my settings change to. Is it backing up twice, or once, or not at all? Why do I have to be present in order for the backup to actually finish? Please help!
    Here's a screenshot. Note the new, second dialog box at bottom. Thank you!!

    Is this a bug? I have a recurring Lightroom 5.4 issue on quitting. I have it set up to backup catalog every week upon exit. When the time comes each week, the backup proceeds, but doesn't end -- it just hangs while a new, second dialog box asking to backup once again appears. Lightroom will not quit until i click on this new dialog box -- this happens each time I backup, no matter what my settings change to. Is it backing up twice, or once, or not at all? Why do I have to be present in order for the backup to actually finish? Please help!
    Here's a screenshot. Note the new, second dialog box at bottom. Thank you!!

  • Having been without my Mac for a month I've been using iCloud mail. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail?

    Having been without my Mac for a month I've been using iCloud mail.on a PC. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail? Thanks.

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system but I can't get it to activate. I'm trying to us

    I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system (Win XP) but I can't get it to activate. I'm trying to use phone activation because the machine I will be using is not net-connected. How can I activate this s/w?

    You won't be able to.  You will need to acquire a special copy.  See the following:
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

    After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

    Even simpler than that.
    Clicking once in a text box selects it.
    Clicking once in a selected text box places the insertion point in the box.
    The clicks do not need to be close enough in time to be read as a double click.
    The same behaviour applies to table cells in Pages and in Numbers.
    Regards,
    Barry

  • I just bought a C4680 all-in-one new in box. It puts an irregular border around "borderless" prints

    I just bought a C4680 all-in-one new in box.  It puts an irregular border around "borderless" prints (at least in 8.5 x ll size) --border is about 1 inch on right, 3/4 at top, 3/8 at bottom and 3/16 at left.  How do I eliminate this?
      Using win XP.

    In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
    In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
    Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

  • Undesired bullet pointed text automatically upon creating a new text box

    Hi there! Due to the snow I'm working from home today but I have a little problem back in work that would be nice to get some help on before i go back hopefully tomorrow so i can continue at full speed!
    I'm using Mac OS X (can't remember which version from the top of my head but something quite new!), and InDesign CS3. Basically, every time i create a new text box, or place an excel file into the document (having to do a lot of that at the moment, creating a price guide), it is in bullet point form, and although it's quite easy to go and turn it back off, with me having to do this quite a lot it's getting somewhat frustrating. It does it every single time i create a new text box even if i have turned it off for the previous one
    I'm pretty sure this is going to be one of those "oh, you just need to..." problems with a really simple answer...i hope so anyway!
    Cheers dears!
    Linz

    Thanks guys, i now seem to have a related problem at home. Here i am using CS2 but working on the same document as at work. I have made sure nothing is selected and set my character and paragraph styles to basic, and hey presto, when i create a text box, all is well. However, when i create a table, and i type in a cell, the bullets return! I have just discovered that turning them off in CS2 doesn't seem to be as simple as CS3 - so firstly - how do i do that?! And secondly - any ideas why it is happening but only in tables?!

  • Problem connecting new hd box

    Hello I have just been given a new hd box by sky to replace the old sky+ box. In the instructions is says i can connect via hdmi cable if i have an hd ready tv, or skart lead if not. (It is not hd ready) However my old sky box connected with an aerial as the skart lead from the tv goes to the dvd player. How do i connect to the new hd box, i can't find anywhere to plug in the aerial? thanks ....

    Just a scart socket i think. Bit disappointed that i was told this was a free upgrade but i've now got to buy some more equipment! I guess a 3-way scart socket extension is relatively inexpensive though.

  • Business Content Installation in BI 7.0 (New Dev Box)

    Hi Bi Experts,
    its my first assigment in BI 7.0 and we have a new Dev box for the BI 7.0
    Now the thing is that i have identified which DS i would be working (0CO_OM_CCA_9)..the IC is 0CCA_C11
    Can any body please guide me down the steps for installation of the objects and what special care do i need to take ..coz I want to purely develop the Data Model in BI7.0 format and not in BW 3.x..
    thanks

    Hi Beekay,
    I am looking for the routines to populate 0PART_CCTR, 0PART_ACTTY, 0PART_COORD, 0PART_WBSEL, 0PART_ABCPR, from 0PIOBJSV &  0PIOVALUE as you indicated.
    Do you by chance have more information on these routines?
    Thanks!

  • Adding a New Check Box field in Business Partner

    Experts,
    I know there are hundreds of thread on this topic. But i'm not clear with that.
    I have to add a new Check box in the Business Partner Screen. We are on SRM 5.0.
    The check box should be placed in "Business Partner Status" Frame of "Company Data" Tab.
    How to go about this, Kindly please expalin the steps.
    More over the Check box will be used for further processing in other tabs.
    Pl throw some light on that aspect also.
    Rgds
    Immediate Rewards for Sure
    SV

    Hi
    Try this link, already copied by ..
    Re: vendor master extensions by customer
    It is not possible to display F4 help for customer fields in BBPMAININT Transaction.
    Supporting link ->
    F4 for customer table fields
    Other useful links ->
    Note 675800 - Business partner enhancement SRM on maintenance screen
    Re: How I can save customer fields in Vendor master?
    Re: Adding new fields in VEndor master data in EBP
    Hope this will help.
    Regards
    - Atul

  • Cloning the db to new Linux box

    Hi,
    There is a new linux box and I need to clone the db from the production to this box. I have done the preclone steps on the production db and then copied the entire set of files (Home and Datafiles) after the shutdown to the new linux server.
    When I run adcfgclone.pl dbTier, I am getting an error
    The 806 installer uses the oratab file.
    The file oratab needs to exist at: /etc/oratab
    Is there any pre-reqs that needs to be done on the target server.
    DB: 11.2.0.1 on Linux 5.0
    Apps: 11.5.10 on AIX 5.3
    Neel

    When I run adcfgclone.pl dbTier, I am getting an error
    The 806 installer uses the oratab file.
    The file oratab needs to exist at: /etc/oratab
    Is there any pre-reqs that needs to be done on the target server.Create /etc/oratab manually and try then. If you still have the same issue, make sure you have an entry in the file to the new ORACLE_HOME as follows:
    SID:ORACLE_HOME:N
    Where <SID> is the database name, <ORACLE_HOME> is the new ORACLE_HOME
    Thanks,
    Hussein

  • Option to mass migrate function modules in a function group to new SAP box

    Hi All,
              We have a requirement wherein we have to move all the existing function modules to a new SAP box.
    I heard that there is an option to download all function modules in a function group to text files and upload them to a new system at once without much progamming.
    Please let me know if anyone knows how to do this.
    Thank you,
    Vasu

    Hi Vasu,
    why don't you just use CTS?
    Create a transport that contains the objects you want to move. Then. assuming the target system is not in the same CTS landscape, move the files to the transport directory of the target system. Then in STSM goto the Import Queue and select Extras->Other Requests-Add to add your transport to the queue. Then import it as normal.
    Cheers
    Graham Robbo

  • New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working

    New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working or some setting is changed? How do I fix this?

    edith28 wrote:
    New Otter Box for iPhone G4S,
    No such model exists.

  • When best to set up a new G4 box?

    I've just signed up for Infinity, and my conversion date is 9th April.  I decided it was time to retire my old Youview box, which is 2.5 years old and slowing down...so I signed up for a new G4 box and the TV Entertainment package.  So post April 9 I shall be able to watch BT Sport through my box and see the various channels that are available for streaming... :-)
    So my question is this - can I set up my new G4 box in advance of the changeover to Infinity, and things will sort themselves out when it detects I am getting Infinity, or am I best to wait until after the changeover?
    cheers!
    m
    Solved!
    Go to Solution.

    Agree with Jam2000,
    Use the new G4. When Infinity is installed it will obtain a different ISP configuration over night, or you can do it by checking for a Software Update in the youview Menu.
    Steve
    BT TV Expert
    I am a BT Employee and an expert on TV queries. I am here volunteering my own time to give advice, primarily on the BT Vision+ and YouView boxes. Go here for more info.
    If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

Maybe you are looking for

  • Need help writing a Java rule in PDF Forms

    I have created an invoice for my contractors via "forms", and in turn made each cell either a drop down list or "read only" field so they cannot change the rate of pay, etc.  Here is my issue...My first drop down cell is titled "Job Description".  Wh

  • How can I add my Sold to field in the infocube via transformation if it is a separate infoobject?

    Hello all, Really need your help...I want to include the Sold_to field in my Revenue BEx query but it is not available in the infocube I am sourcing from. It is however in BW as a separate infoobject. Is it possible to include the data in my infocube

  • Trying to install features and Roles

    OK I've selected my features and Roles. When I run the install from a PXE boot using the Lite Touch Windows PE (x64). The OS installs and reboots and then attempt to run the roles and features install, at which point it dies and return the summary sc

  • Map excel columns to oracle table column using forms 6i

    Hello, I am importing data from excel to oracle table using oracle forms 6i. Suppose my table have 3 columns id, name,sal. The excel sheet i am importing having 3 or more colums, also excel sheet columns are not in order as per table columns. i.e my

  • How do I create a direct URL link to my iBook product page?

    How do I create a direct URL link to my iBook product page? The Apple iTunes linkmaker webpage appears to have been updated recently --- and I can't create a direct link to my iBook, or any iBook for that matter.