New HD for a Mac Pro

This is my first time buying an internal hard drive so i want to make sure I buy a good one. The one I'm looking at right now is the Seagate Barracuda XT ST32000641AS 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive. Will this work with an 8 Core Intel Xeon Mac Pro G5 (early 2009 I believe)? Also I'll probably get 2 if I buy this HD, if that makes any difference.

Hi Manged,
The early 2009 Mac Pros have Intel Xeon "Nehalem" processors, and, as Clio 1 has already advised you, G5s are not Mac Pros.
Mac Pros were first released in 2006, and have always had Intel processors, whereas their predecessors were Power Macs which had PowerPC G5 processors.
There were no 8-Core Power Macs, and so it would seem that you have an early 2009 8-Core Nehalem Mac Pro.
You can confirm what model you have by clicking on About This Mac/More Info, and then looking at Model Identifier under the Hardware Overview heading. If MacPro4,1 is listed, then you have an early 2009 Nehalem Mac Pro.
Very few Mac Pro users would recommend Seagate drives. Western Digital and Hitachi are regarded as being better and more reliable.
The Western Digital Caviar Black is an excellent choice, and is probably the HDD which is most often recommended on these Mac pro pages
http://macperformanceguide.com/Storage-Drive-WesternDigital-CaviarBlack-2TB.html
The above link is a bit out of date, and this is the manufacturer's current website page for its Caviar Black Range:
http://www.wdc.com/en/products/products.aspx?id=100
You have stated that you want to make sure that you buy a good drive. So my advice, is to disregard the Seagate Barracuda, and buy Western Digital instead.
Buy the WD Caviar Black, unless you intend to set up a RAID configuration with these drives, in which case the more expensive RE4 Enterprise is a better option.
If you do intend to set up a RAID, one very important consideration is that all the drives in the configuration should be identical.
Regards,
Bill

Similar Messages

How can I buy an new Superdrive for my mac pro without having to take my computer to a apple store?????

I have a Mac Pro and my optical drive is not working anymore.Thus, I went to the online store to buy another one.
Surprisingly, the only one I found was the macbook air (external) superdive.
I did not buy it online on that day. However, I went to the Apple Retail Store in Sydney to buy another external hard drive and asked to one of the costumer supports in red if the "macbook air" superdrive would work in any mac. The answer: YES!!! So, I got one. When I was paying the products I asked to the other "red mac guy" the same question... Again, the answer was YES!!!
So... Do these costumer support guys have any training. It is written in the box that requires a macbook air... That's why I asked for two different guys!!! Why did they say YES???
Ok! Lets not put the fault on the red guys... So I ask Apple:
Why apple does not make a external superdrive for pros?? Or one that works for all macs!!
or simply
Why can't we buy internal superdrives anymore? Neither the online store or the retail store sell them anymore!!!
How do I solve my problem? I have to waste my time, making an appointment and taking my Mac Pro to a apple store and wait untill all iphone user in the line learn how to send their photos to their facebook??
It is really strange how apple is leaving the pro costumers behind to become a ipad and iphone industry!
Let do not forget that mac only is where it is now becouse of the pros who made it name and did not leave it die.

You know you don't have to buy a replacement dvd drive from apple. For example, take a look at OWC's selection.
You don't say what year your mac pro is so I use a 2008 as an example. On that page click the little picture that shows a 2008 mac pro. That will take you to this page. And there's an example of a Lite-On drive.
In addition, on the right side of that page are links to instructional videos on how to add the drive to your machine. Click, for example, Optical, med (medium) and you will see how straight forward it is to change the optical drive.

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of noise! The noise disappears in sleep mode. What can be done?

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?

I bought it from Other World Computer last week for $95. 3rd party, I suppose.

How much is a new screen for a mac book pro

how much is a new screen for a mac book pro? - mine is cracked and shattered, everything else seems to work at mo?

check this link ifixit.com

Are the new displays for MacBooks only - Options for a Mac Pro User?

I am currently running 23 inch displays in our small design studio (4 workstations). I need a new or a second display for my own Mac Pro. I hate the new 24 inch display. I cannot imagine running Final Cut Studio on this glossy screen. So is anyone else out there in this situation? Looking for other choices? I want to stay in the Apple line up if possible but now I am even looking at Dells, as I feel Apple will only continue with the glossy screens.
Are any pro-users in video or photography using the new 24 inch displays? and I mean users who do this for a living. Thanks everyone?

Hello!
Sorry it took a while to notice your post. There are two options for your mac pro to use the new 24 inch cinema display. The ATI Radeon 4870 HD has the mini-display port on it, and the Nvidia GT120 also is an option. Personally, I'd go with the 4870 as its a much better graphics card.
You can find them on the Apple store's site under DISPLAYS/Graphics
Hope this helps.
Now, just to clear something up. If you have a 2008 mac pro, you can run the GT120 if you prefer.

Help with new video card for 2008 mac pro

I was looking to upgrade the speed of my 2008 Mac Pro Video
I currently have a nvidea 8800 512mb
Looking for any suggestions?
I need something that will not block the 2nd 2.0 pci slot?
From my understanding my mac has two 2.0 pci slots and one is used by the video card?

http://www.ebay.com.au/itm/Nvidia-GTX-780-3-GB-for-Apple-Mac-Pro-/331071998403?n ma=true&si=TLQfb78DRSdpDaz0cZAp4FFlvP8%253D&orig_cvip=true&rt=nc&_trksid=p204767 5.l2557
this Nvidia GTX 780 is the best your mac can handle safely, the card can work on 1 slot at around 95% according to another site:
http://www.techpowerup.com/reviews/Intel/Ivy_Bridge_PCI-Express_Scaling/3.html
this is what i plan to use in my mac pro 3,1

Please help me ,i forgot the synchronising password for my mac pro lion backup disk

please help me ,i forgot the synchronising password for my mac pro lion backup disk

If the backup volume is encrypted, and you forgot the password, then you'll have to erase the volume and start a new backup. There's no way to recover the password.

New hard drive in Mac Pro showing 0 bytes after partitioning

I bought a Western Digital Caviar 2TB internal hard drive for my Mac Pro (2 x 2.66 GHz Dual Core Intel Xeon (late 2006), 12GB RAM, Mac OS 10.6.8). It already has two 500GB internal drives in two of the four slots.
I slotted the new WD hard drive in and started up the Mac, getting an alert saying there was an unrecognisable disk and did I want to initialise it? Yes, so it opened up Disk Utility.
This showed my two 500GB drives plus the new WD drive at 2TB. To initialise it I erased the disk which failed with an error ("POSIX reports: The operation
couldn't be completed. Input/output error").
I next decided to use Partition instead, choosing just one partition of 2TB, Mac OS Extended (Journaled). After 7 minutes it said the process had been completed and the volume was mounted, though it didn't appear on my desktop, just in Disk Utility. I thought a restart would refresh and show it on the desktop.
Once the Mac was up and running again there was nothing there at all - and now it wasn't even listed in Disk Utility. I shut down, took the hard drive out,
looked at it, scratched my head, replaced it, and turned the Mac back on.
Once again I got an alert telling me the disk was uninitialised and would I like to format it, so clicked OK and Disk Utility opened. This time the disk was
there (WDC WD20EZRX-00DC0B0) but no volume. The info said the drive had a size of 0 Bytes and I could not erase or partition as all buttons were greyed out,
with the Partition tab saying 'this disk is too small to contain partitions'.
So what can I do now? According to macupgrades.co.uk this drive should work in my model of Mac (they recommend and sell it, though I purchased it from NORDPC via Amazon as it was a little cheaper).
http://www.macupgrades.co.uk/store/product_info.php?products_id=532
I tried, with the help of my more computer-literate brother, to erase the disk from the command line via the Terminal, getting a result of "Error: 6: POSIX
reports: Device not configured". (Actually we first tried to reformat it, with an error of "does not appear to have a valid file system format").
Does anyone with more knowledge of such things have any ideas or advice? It would be much appreciated.

Unless the drive and sled are not inserted properly - unlikely - or that other drives don't work in that slot - watch out if true, unlikely but loose SATA cable - it IS a bad drive.
If you don't have a PC, setup Windows VM and use WD Lifeguard which is excellent and tests for things like bad SATA cable communicating.
You could also - I always use Partition tab btw - go in there and set it to exFAT and Windows Master Boot Record. All you want is a good drive. This one is not.
GUID tests first and last 10,000 sectors or more to insure that the partition tables and hidden areas work (they are not it is failing). Use to be that a "backup volume information block" was treated as optional if any sectors failed, now it is not.

8800 GT cards ARE available for older Mac Pros...

http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?s=topSe llers&fnode=home/shopmac/macaccessories/displays&nplm=MB560Z/A&mco=OTkzNDY

Frank Einstein wrote:
do you think windows will auto-detect the card, since i used my bootcamp install cd to install the drivers for my current windows installation, would it have the drivers for this card installed or no?
currently using the x1900 right now with just the bootcamp drivers.
Before you swapped cards I would download the nVidia drivers now and put them somewhere on your Windows drive, make a folder for them. I'm not sure if you are using XP or Vista. Vista has a larger driver library (and newer) and I would think would detect it, but I'd still want the latest and greatest from nVidia's site.
Worse that can happen is you'd have to start Windows in Safe Mode (basic VGA drivers) and then run the nVidia driver setup from the file you had previously downloaded.
I just ordered the card for my Mac Pro. I had to downgrade my ATI x1900XT due to stability issues.
Steve

Thunderbolt retrofit for Intel Mac Pro available?

Is there gonna be a retrofit for older Mac Pro (2009) to use Thunderbolt?

A quick search brought up AMD's statement from a year ago, so ancient history but "AMD Does Not Believe in Intel Thunderbolt" might mean they didn't think worth investing in R&D and engineering such a card in 2011.
http://www.xbitlabs.com/news/other/display/20110228163206_AMD_Does_Not_Believe_i n_Intel_s_Thunderbolt.html
ADC is deal. Long live ADC, remember that?
AMD is apparently not impressed with Intel's Thunderbolt.
An unnamed AMD representative reportedly said that Intel's new Thunderbolt tech will become another proprietary standard that may not be widely adopted. The obvious reason is the current overall lack of devices that can take advantage of the extreme throughput.
http://www.tomshardware.co.uk/Thunderbolt-PCI-Express-DisplayPort-10-Gb-s-Propri etary-Standard,news-35083.html

Where can i find a list of compatible ssd's for Apple Mac Pro 3.33GHz Six Core Mid 2012 Desktop/PC.

where can i find a list of compatible ssd's for Apple Mac Pro 3.33GHz Six Core Mid 2012 Desktop/PC?

http://www.storagereview.com/best_drives
http://www.storagereview.com/buying_an_ssd_the_top_10_brands_that_matter
Prices have crashed. Look and you can find Samsung 128's and others for $89 sometimes.
It is not just moving the OS and data apart, though it does matter, and more from you should never have the OS cluttered with data, been doing that for... 35 yrs. 0.01 ns vs 10 ms. 60k IO's per second. Reads in 220MB/sec but held back from making full use of SATA 6G.
OWC Mercury Aura Pro Express 6G SSD, the first and only third party SSD compatible with the new 2012 MacBook Air.
http://thessdreview.com/category/our-reviews/

RAID setup for a Mac Pro

I'm trying to figure out what would be the best configuration for my Mac Pro tower as far as storage and backup is concerned. I want a RAID drive with hot swappable slots but I'm not sure what the best solution is. Apple's SAN and xServe seem far too sophisticated for my needs (not to mention pricey). I bought a Norco DS-500B eSATA RAID storage array but the RAID controller card is a PCI-X and incompatible with my machine (although the documentation says it's totally compatible...weird). And so in my investigation as to what card to get to replace the one provided, I couldn't find any reviews on this product, save one which said that the array is very bad and will destroy all your hard drives. Sooo...I'm returning the array in search of a new one, but again my investigation has turned up very little. Am I the only one? Or am I out of touch with the real solution?

What's missing in your post is two of the most important elements.
How much storage do you need?
There is a myriad of options if you want 2-5TB of space. Not so many if you want 2-5 petabytes of space
How much are you prepared to spend?
You have many, many options at $100,000, but no so many at $100
The other thing to consider is that by and large, price reflects quality - either in reliability or performance (or both).
If your budget is, say, $2000 you have to decide whether you're better off buying a budget 5TB system or a pro 2TB system - the latter system clearly has less capacity but may offer higher performance and/or reliability. Any RAID system is only as good as all the parts, and the physical drives are only a small element there. The controller, internal electronics, cabling and even interface can have just as much impact on a reliable RAID system (almost any RAID system can recover from a failed disk, but a burned-out controller is harder to recover from).

CPU stand for a Mac Pro?

Does anyone know of a good source for a CPU stand suitable for a Mac Pro? I know of a couple that I could get in Japan, but shipping or a plane ticket is a bit more then I want to spend.
Something like the following items.
http://www.assiston.co.jp/?item=831
http://www.pawasapo.co.jp/products/mac/prs56.php

Kujako- I do have a CPU 'skate' that I had a Mac Pro on for 4 yrs. I don't know what the metal is but after 4 yrs use it doesn't flex so is sturdy.
I received the skate 4 yrs ago as a gift; it has no identification on it (manufacturer or source), giver not around so can't ask for info. Needs a bit of cleaning but not hard & can do.
It looks a lot like the pics of the Japanese one but not as shiny, wheels smaller.
The base ht is ~3 1/4", wheels are nylon & ~1" diameter, length of inside bed=17.5", width=8".
Wheels don't lock, only go forward & back, not side to side.
If you're interested I'll take pics -1st ones didn't turn out, need better lighting, also not sure how to get in in here but will try if you are interested and I can get instructions for getting a pic on this site. Embarrassingly non-techy at the moment.
The Mac Pro went south--something elect. & I've given up, not worth my effort to do more. Have a new iMac.
So I'm willing to UPS the skate if you're interested in it. Feel free to say No. Just would like to find a good home for a Useful Object.

New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
If your cinema display goes dark:
1. shut down computer
2. restart
3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
4. keep holding keys for 2 startup cycles
5. release and go back to work if you're lucky to have a restored screen

Power consumption for latest mac pros?

I read on Apple.com somewhere that the 2008 Mac pro's maximum power consumption is 260+ Watts for a Quad-core. How different is it for the new Mac pros?

I guess English is a lost language now.
For the Mac Pro it is really really simple and based on 7 yrs of PowerMac G5s and then Mac Pro owners: 1500VA - you can get by with slightly smaller 1300VA and some people, because of better build, used SMART UPS 1000VA.
And as I said in another thread, the Mac Pro 'suffers' from inrush current that can knock out smaller UPS, and people that have tried to use 500-900VA units got into a lot of trouble and had to upgrade.
No one can know the total system watts used other than use a KILLAWATT on the power cord.
Look at the case, can an iMac dispel as much heat as easily? no. It is designed for lower power and much fewer components.
Core i7 has HyperTransport and Turbo boost for one thing. Apple had a huge coding problem with audio (incl iTunes and others), flash and Nehalem based systems. High cpu temperature and lost processor cycles and performance.
The 2010 Mac Pro can do more for the same, and DDR3 lowered heat and watts noticeably.
There are sites where you can plug in various components and get an idea of how large a PSU would be needed. Try one of those, too. PSU efficiency, and there is "overhead" needed for the motherboard chips and to run PCI Express for graphics, Firewire, etc. It all adds up.
Apple's example is low-end system configuration, the chart says CPU MAX, not SYSTEM (but then, most everything on hardware requirements lately needs a grain of salt).
Quad-core 2.66GHz configuration:
One 2.66GHz Quad-Core Intel Xeon "Nehalem" 3500 series processor,
3GB memory (three 1GB 1066MHz DDR3 ECC DIMMs),
640 GB Serial ATA 3 Gb/s 7200-rpm hard drive,
18x double-layer SuperDrive,
NVIDIA GeForce GT 120 with 512MB of GDDR3 memory
APC we know, whether PowerMac 2.0DP from 2003 or Quad G5, or Mac Pro, that 1500VA is strongly recommended.

New HD for a Mac Pro

Similar Messages

Maybe you are looking for