New HD installation on a G5

I just installed a new sata hd for my g5. I am trying to install os x on the hd, but when I go to click continue twice, there is no volume to choose for installation. I ran disk utility and nothing shows up there either. I am positive that i installed the hd correctly, because my old hd worked again.
Does anyone have a clue what's going on? Is there something i'm doing wrong?

I emailed Hitachi suppport and got this response.
It works, just a pain
Hard drives of SATA type interface does not have jumpers to configure. You
can still use a SATA 3.0Gb/s drive (set to 3.0Gb/s) in your system, but it
will only work at 1.5Gb/s.
If your have a PC system, you can temporarily install the drive internally
and use our utility called Feature Tool that'll allow you to change various
ATA settings. This utility has the diskette and CD version. If you do not
have a floppy drive and are unable to create a Feature Tool diskette, you
can select the Feature Tool CD image. The fourth download link is for the
image file. This file will allow you to create a bootable CD version of
Feature Tool when a floppy diskette drive is unavailable. For instructions
on how to properly use this file, please refer to the documentation
included with your CD burning software.
If you have any questions regarding the usage of Feature Tool, please refer
to the User's Guide (see page 17 on how to change the drive capacity). The
Feature Tool and User's Guide can be downloaded from the following URL:
http://www.hitachigst.com/hdd/support/download.htm#FeatureTool
Before running Feature Tool, ensure that your system boot sequence (in your
system BIOS) is set to boot to your CD ROM drive as the first device.
Insert the bootable Feature Tool diskette or CD that you created and let
the system boot to this CD.

Similar Messages

How do I move my iPhone to a new iTunes installation?

Hi folks,
I have a new Windows 7 computer and want to sync my iPhone with it, but iTunes says it's going to delete all of my data. My old computer that I used to sync with is gone; the drive has been reformatted.
I don't care about the music on the phone; I have all of that on my server. However, I'm worried sick about my apps and the data stored within them!! I have years worth of life data, journals, etc, in apps on this phone. How do I tell iTunes, "This is my new computer now; back up and sync here from now on?"
Here's what I've done so far:
1. I authorized the new iTunes installation with my iTunes account.
2. I right-clicked on the phone within iTunes and selected "Transfer Purchases." It appeared to work, said it was copying all of my apps. But when I go to the Apps tab and click "Sync Apps", it tells me it's going to replace all of the apps on my phone with the apps in iTunes. However, I only see two (out of dozens) of my apps there! Did "Transfer Purchases" not do what I expected it to? How can I fix this?
Thank you!

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.
The iphone will sync pics and itunes content with one and only one computer at a time. If you sync to another, it will indeed erase the current content and replace with content from the new computer.
Also if you sync contacts/calendars to a blank computer, they will be erased as well. Another reason a backup is critical.
If you have failed to maintain a backup ( not good)then, transfer purchases will transfer itunes purchases. Make sure you have authorized the computer for your itunes account(s).
About iTunes Store authorization and deauthorization
Backup your iphone:
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
Enter one unique contact and calendar entry on the new computer. When you first sync you should get the option to merge the data.
Than make a backup copy of your computer and always maintain it.

New Server Installation, now client computers can't connect to services. Where to go from here?

Hello.
I recently had to setup a new Mac Mini Server (Mavericks). We had one previously but one of the raided hard drives failed. No backup.
Our office of 6 Apple MacBook Pros used to connect to all file sharing and calendar services, easily.
On the new Server installation, I added the same users with the same passwords etc. The client computers cannot access calendars, file sharing etc. On the clients, I have opened up System Preferences > Users & Groups > Login Options > Network Account Server and added the FQDN of the server, but I get an error ' Unable to add server. Connection failed to the directory server. (2100) '
2 of the clients are on Mountain Lion. The rest are on the latest Mavericks.
I'm a bit lost on where to go from here and would appreciate your help before I wipe everything and start from scratch.
Thanks.

Hi Strontium90
Ha! There was a time machine backup, but we had a storm here which rendered it and the server useless. We are such a small team without an 'IT' guy, apart form me as I have a vague interest in all things Apple.
What is your DNS name space?
Do you need the name here?
Do the servers and the client agree on this name?
Not sure what you mean. The domain name works as when I type it into a web browser, I can see the 'Welcome to Server' page.
Did you enable an Open Directory Master?
Yes. Open Directory is running.
Did you grant the users/group access to the service you are offering?
Yes. All services are checked for each user.
Make sure the user/group is permitted to access your enabled services.
All allowed, too.
Oh, and implement a backup strategy
Will do, once I sort out this problem. Time Machine and off-site, I think.

Sync iPhone 4 with new Mac installation

I've just replaced the hard drive in my MacBook Pro with a fresh new OS 10.6.8 installation. The old drive is still accessible via a USB external case.
I did not use Migration Assistant, as I didn't want to inherit any mess from the old system, and MA's options seem extremely unrefined - most checkboxes are very non-explicit about what it will migrate.
I have transferred all music, book and app files to the new iTunes from the old. My new iTunes is logged into the same iTunes account as the old.
I've manually set up Apple Mail, but my Address Book is currently waiting for contacts, and iCal is also empty, which I presumed I could sync directly from my iPhone.
But I would like to re-sync my iPhone 4 with the new iTunes WITHOUT erasing the phone. I have many hours worth of user configuration data within my many apps - favourites in GPS apps, saved game settings, documents in reader apps etc.
From everything I've read, this seems impossible! The new iTunes installation insists on erasing the phone. SURELY this can't be true. How do I store my phone in it's current form and retain all current data and settings?
Any assistance greatly appreciated.

1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, DO NOT SYNC at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Transfer Songs from Ipod to New Computer and New Itunes Installation

Hi,
I want to transfer songs on my Ipod to a new installation of Itunes on a new computer. I get a message that my Ipod is synced to another library and that I can only be synced to one library and that my ipod will be erased and synced to the currently libary. The problem is my current library is empty since it's a new itunes installtion and I don't want to erase my ipod and delete all my songs.
So how do I transfer songs from my ipod to the new itunes installation on my new computer?
Thanks for any replies.

I think I've read in a post before that you can't do it that way. That you can only transfer music from the computer to the iPod, and not the other way around. I believe they suggested backing up your library (to disk, I guess) and installing it on the new computer. Something like that. It seems silly that the transfer only works one way, but there you are.

Performing "offline" compliance module update to new ISE installation

Hi everybody,
I am just wondering if anyone knows how perform compliance module on a new ISE installation to get the AV and AS updates, while the ISE is "offline", (not connected to Cisco/Internet).
The ISE has Advance Service license, but the customer's security poilcy prohibits connecting any device on their IntraNet to the internet, and if there is any updates to get from the Internet, then it has to be received on the internet network and manually transport it to the IntraNet.
Appreciate your input.
Mike

To upload offline posture updates, complete the following steps:
Step 1 Go to https://www.cisco.com/web/secure/pmbu/posture-offline.html .
Save the posture-offline.zip file to your local system. This file is used to update the operating system information, checks, rules, and antivirus and antispyware support charts for Windows and Macintosh operating systems.
Step 2 Access the Cisco ISE administrator user interface and choose Administration > System > Settings > Posture .
Step 3 Click the arrow to view the settings for posture.
Step 4 Choose Updates . The Posture Updates page appears.
Step 5 From the Posture Updates page, choose the Offline option.
Step 6 From the File to update field, click Browse to locate the single archive file (posture-offline.zip) from the local folder on your system.
Note The File to update field is a required field. You can only select a single archive file (.zip) that contains the appropriate files. Archive files other than .zip (like .tar, and .gz) are not allowed.
Step 7 Click the Update Now button.
Once updated, the Posture Updates page displays the current Cisco updates version information under Update Information.

HT5655 The new Flash installer from Adobe still isn't working, right?

The new Flash installer from Adobe still isn't working, right? We get the "installation failed" messages, and we're awaiting Adobe's follow-up on it?

AdmrlLocke wrote:
Adobe Acrobat 8 has two problems on my iMac. The lesser problem comes when I go into the Print command and click "Preview." I get a message that says that Preview isn't supported.
Preview is not supported because building a preview of a print job under OS X involves creating a .PDF file. You already have a .PDF file open if you're using Acrobat, so there's no point creating a new one.
The greater problem just cropped up as I was writing about my problems with Quicktime and Real Player: Acrobat tried to update itself and then gave me a message that says, "Cannot overwrite file /Users/(myname)/Documents/Update5/AdobeUpdater/acrobat8pro-en_US/AUMProduct.dmg .
That's not a problem with Acrobat. The system is saying that you have a file named AUMProduct.dmg in place already, and you don't have permission to update it. You need to change the permissions on that file so that you can update it, or to use an account which has update permission. Or it might just be locked and you need to unlock it. Locate it using the Finder (you have the complete path to the file listed above) and see what permissions are on the file and whether or not it is locked.
You might also just put the entire Update5 folder into the Trash and try updating again.
The file maybe be locked or you may not have sufficient access rights. Please make sure you have write access to this file." Can anyone help? Thanks.

New driver installation

Hi,
I installed JDBC driver- ojdbc14.jar for oracle 10.2 and it is working,now I want install JDBC driver ojdbc14.jar for oracle 9.2 (I am on Unix & PI 7.1) for that I add the ojdbc14.jar file in .SDA file and deploy it using JSPM.
but still the server is accessing 10g driver it is not detecting 9.2 drivers.
what to do? is there any process like I have to undeploy old driver and then deploy the new driver?
some suggest about CLASSPATH entry where can I locate it in unix,(but in my case jar file name is not changing so it is not requried)
please guide

Hi,
Please go through the below document for new driver installation:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
Thanks,
Prasanthi.

Disk Space of a new 2004s installation

Hello guys,
i want to build up a test system on a linux vmware system (no development system - a test system for us)...
So i need to know the disks space that a "empty" installation is using?
How many disk space is used in case of a new 2004s installation?
Regards
Stefan

Hi Stefan,
It depends upon which it scenario you are choosing, for example whether it is ABAP or ABAP + JAVA , usage types ( EP / BI / PI / MI.. etc) you have selected, and so on ... You can use Installation Guide to calculate minimum required space for different scenarios.
Blank installation of ECC 6.0 system takes around 73 GB of space.
Jay

ODS activation failures after new hardware installation..urgent

Hi All,
I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
Task 0040 during SID specification without confirmation
and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
Please advice me what to do.
Thanks,
Manjula

What is the patch your currently on at the moment.
It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
Check SM21 and ST22 for the more information on the issue.

B1 Upgrade failed to launch the new version installation

Hi all
I encoutered the following problem when upgrading SAP B1 V8.81 SP0 PL5 to PL6. The Upgrade test showed no errors and the upgrade on the server finished properly. But then i started the client and got the message "The system cannot find the file specified. The B1 upgrade failed to launch the new version installation."
It is not possible to deinstall the SAP Client because there is no such point under control panel > software! Does anyone know this behaviour? When i try to start the client from the b1_shr folder the message appears that there is already another version installed.
Could it be a problem upgrading from PL5 to PL6 because they are both upgrade packages and not patchlevel updates?
Thanks for your help.
Greets
Marco

Hi
I do not understand this sentence:
>> When i try to start the client from the b1_shr folder the message appears that there is already another version installed.
You have to run the SAP B1 client in the server to start the upgrade.
Did you open SAP B1 client in server machine? Did SAP show you message to upgrade?
All the best.
Agustin.

Ichat won't open since new hd installation? help.

ichat won't open since new hd installation? help.
since installing a bigger hd my ichat won't open. the shortcut is still there and when i click it it bounces in the toolbar a few times then dissapears. i have tried to delete and re-install but i cannot delete it.
im on osx version 10.8.3, on a macbook pro.
please help, thank you

HI,
I feel there is slightly more to this story.
Mountain Lion (OS X 10.8.x) does not have iChat.
It has Messages which is iChat+ as it has had iMessages added to it.
(I think that a Mountain Lion Upgrade is part of the picture.)
This suggests you Changed the Hard Drive and either Installed or cloned the OS on to the (new) Drive.
At this point you may have migrated your Mac User Account from different computer or the old Hard Drive.
If you were Migrating apps from an old drive or computer then it is technically possible to "install" iChat in the Applications Folder but it will not work.
Each version of iChat has to "Match" the OS it is on.
Broadly speaking that is iChat 4 is in Leopard (OS X 10.5.x) and iChat 5 is in Snow Leopard (OS X 10.6.x)
In fact it goes deeper than this in that incremental updates in the OS include (sometimes) the updates to iChat.
This means that by OS X 10.5.8 at the end of the Leopard Updates iChat is at version 4.0.9
Snow Leopard gets to OS X 10.6.8 but iChat 5 only gets to version 5.0.3 at this point.
Open your Applications Folder.
Does this contain iChat, Messages or in fact Both ?
If you then highlight and then use CMD and i keys (Get Info) what version information do the app(s) display ?
The Messages App should not be put inside any other folder.
I have seen where people have created "Messaging" folders putting MSN, Skype and Messages or iChat in the same folder to "tidy" the Applications folder.
This can mess up updates.
In fact if you have done this the DOCK item may point to something that did not get Updated to Mountain Lion.
10:16 PM Saturday; April 20, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to detect a new NIC installation

Hi all,
I'm new to the Solaris (Sun) environment, so for most of you the question will sound pretty stupid.
I've heard that under solaris 8, there is a way to force the os to autodetect new devices installation. What is that sequence of arguments that I have to give Reboot?
Or, what is the software that will autodetect the new sun NIC i've isntalled?
thanks a bunch.
phil.

Hi
At the OK prompt, just type "boot -r" .
The r option will tell the kernel to identify any new hardware and
rebuild/reconfigure itself.HTH
Shridhar

New OIF installation - Very slow response from OHS

Hi,
I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
If anyone here has any insight into this problem, please let me know.
Thanks,
Jim

Hi,
I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
Jim
======= POSTED to Application Server - General forum ============
I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
1) What's the effect of dms not working?
2) Is it possible to just disable dms?
I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
Jim

Pressed 'Install Lion' on existing copy of lion and the new Lion Installation started. I have cancelled it. Now, will it reformat (and so remove) all the files or will it replace the lion files only, leaving my files alone if I continue?

Hi
I wanted to reinstall the existing copy of lion on my Macbook Pro, leaving my files alone. So I started the Lion Installation and I thought that after the mac reboots, the window will pop-out asking what I want to do. It didn't however and it started new lion installation after which I immediately aborted it. My question is: Will my files stay untouched if I carry on installing?
Thanks for the answers in advance.

The Lion installer won't ask you if you want to repair. If you boot into the Recovery HD you can then select to reinstall Lion, which willl reinstall the Lion files but leave your Home folder alone. If you want a clean install, then from the Recovery you can open Disk Utility to wipe the Lion partition and then use the transfer function to retrieve your data from your Time Machine backup.

New instance installation on hardware

Hello gurus!
I am new to installations on UNIX platforms. I intend to install a new SAP application on an existing hardware which already has an installation.
There is an existing ERP installation on the hardware and I intend to install a BW system on the same hardware.
I have tried the installation and have permission issues each time i run the installation.
my questions are:
1. Are there prerequisites for this kind of scenario?
2. Do I need to change environment variables
regards,
Tolulope

Can you post the permissions errors?
You should be able to install two systems on one server. The biggest requirement is that you use different system numbers.
J. Haynes

New HD installation on a G5

Similar Messages

Maybe you are looking for