New HD Templates available

Hi guys,
This is Szymon Masiak from motionVFX.com
I just wanted everyone know that besides Apple Motion Templates, you can now get High Definition After Effects Templates at http://www.motionvfx.com/
I hope you'll love it.
Szymon.
motionVFX.com

Thanks Andrew,
I just downloaded your free skin and it looks really nice. I like the colours you have used throughout all of your samples there...
Some of the packaged themes with APEX are a "bit stark" and whilst I am looking at the blue gray theme that was released recently I think I will start having a bit of a hack and see what I can come up with - or maybe just buy one from you :>)
Thanks again,
Mike
Message was edited by:
Mike C

Similar Messages

Creation of new layout templates

Hello,
in the portal there are some layout templates available for pages. They are used for the innerpage of default frameworkpage ,too. I like to change the width of first column of the narrowWide 2 columns layout. Found in online Help that you have to use the developer studio or change the *.jsp file directly to get a customized layout (template). I don`t like to change the available jsp files. Best idea would be to have a new jsp file in place on which a new template is based. I found the narrowWide.jsp in the file system where you can change easily the width of colums. But how can I get a new jsp File? Is this only possible by using the developer studio or is there another way to do that?
Thanks for every response.
Regards
Alex

Hello Ganesh,
I like to go closer to your solution.
Ok, my steps would be:
1. Searching the folder where the narrowWide.jsp and the related portalapp.xml is found (usr\sap\...).
2. Make a copy of the narrowWide.jsp, rename it to narrow35Wide65.jsp and save it in the same folder where the narrowWide were found.
3. Edit the new *.jsp file and change the width of narrow column to 35% and wide column to 65% (result should be increasing the narrow column width)
4. Rename the extension of current portalapp.xml in the same folder to portalapp.xml.bak and make a copy of the file in same folder giving the original file name.
5. Editing the portalapp.xml and paste a new component entry based to the narrowWide component entry. Here I have to change the component name and the jsp file name only like in this example, right?
</component>
- <component name="<b>narrow35Wide65</b>">
- <component-config>
<property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout" />
<property name="ResourceBundleName" value="pagebuilder_nls" />
<property name="SafetyLevel" value="no_safety" />
</component-config>
- <component-profile>
<property name="ComponentType" value="com.sapportals.portal.layout" />
<property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)" />
<property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the left" />
<property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld" />
<property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld" />
<property name="com.sap.portal.reserved.layout.TemplateFile" value="<b>narrow35Wide65.jsp</b>" />
<property name="AuthScheme" value="anonymous" />
- <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
<property name="plainDescription" value="Column 1" />
<property name="orientation" value="vertical" />
<property name="designClass" value="prtlPageConL" />
</property>
- <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
<property name="plainDescription" value="Column 2" />
<property name="orientation" value="vertical" />
<property name="designClass" value="prtlPageConR" />
</property>
</component-profile>
All other values can stay same?
6. Is a restart of portal server necessary?
7. It should be able to create a new layout template in PCD based to narrow35Wide65.
Will this work?
Thanks and regards
Alex

New Web Template: Slimbox for Lightroom!

I've produced a new gallery template for Lightroom's Web module using Slimbox, a very nice Lightbox clone.
Check it out:
http://theturninggate.com/blog/adobe-lightroom-slimbox-template
Matt

G'day folks,
Nice to see such lively conversation! Thanks to everyone for providing such good answers to the questions posed about my template before I was able to get on here to answer them. ;)
I've updated the template to version 1.1. Changes:
- Added a Watermark checkbox.
- Modified the tables around the thumbnails to produce smaller gallery pages and slightly faster loadtimes.
- Gallery now looks for images in content/bin rather than just in bin.
I also reordered the CSS a bit. KBPhoto's changes will still work, but the CSS has been moved within the file, and I deleted a few of the labels in the CSS. Had I read these postings prior to updating the code, I'd have left them in. Sorry! Anyway, shouldn't be too difficult to figure out if anyone still wants to make the modification.
Hopefully my changes will help to remedy the "somewhat strange" rendering, but maybe not.
Not sure about rolling KBPhoto's modification into an official update of the template, as I tend to favor more reliance on CSS, but if it's a major issue for users, I'll consider it.
I also removed the 4x4 corner PNGs from the thumbnail slides. The difference is hardly noticeable, but if anyone misses them, let me know and I'll put them back in.
The latest version is available from the usual page:
http://theturninggate.com/blog/adobe-lightroom-slimbox-template
Cheers,
Matthew

Are there templates available for Numbers 08?

I'm trying to create a sales account profile in Numbers. Is there a template available for this?

d,
Just be careful when you browse for Numbers Templates that you're getting an 08 version. The newer ones are likely to be for 09. You can use the trial version of 09 to open, browse and Save As 08 if you wish. There will likely be some fix-up to do in that case, but it would be better than nothing. It's amazing how the Numbers Templates on the sharing sites have improved in the past several months, and of course the best will be done is Numbers09.
Jerry

No templates available on Enterprise CA

I asked a question previously http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e935915-89ec-4c82-ae4f-36a8aeb56074/various-certification-errors?forum=winserversecurity, which was marked as answered before my issue was resolved.
I have an Enterprise CA on which the CA certificates have expired, I need to create new certificates, however when I try, there are no templates available for me to select. The account that I am using is a Domain Admin, Enterprise Admin and a Schema admin.
Please can someone help?

On Tue, 22 Apr 2014 10:27:37 +0000, AmandaJayne wrote:
I asked a question previously
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e935915-89ec-4c82-ae4f-36a8aeb56074/various-certification-errors?forum=winserversecurity, which was marked as answered before my issue was resolved.
I have an Enterprise CA on which the CA certificates have expired, I need to create new certificates, however when I try, there are no templates available for me to select. The account that I am using is a Domain Admin, Enterprise Admin and a Schema admin.
Please can someone help?
In your original thread you didn't indicate that you'd also let the CA
certificate expire. If that is the case, you're going to have to rebuild
your PKI completely.
Paul Adare - FIM CM MVP
LISP: To call a spade a thpade.

Print Quote the report is in PDF but need to be new RTF template

We have 11.5.10 apps, the Quote screen is an OAF screen.
When clicking Print Quote the report is in PDF, They want to include a new RTF template for printing instead of PDF.
The new RTF template is created. But what I do not know is how the quote screen will take the new template. I can use XMLP to upload the RTF template but that may not be sufficient to make it appear in the Quote screen.
I am looking at the profile ASO:Default Layout Template. Am I headed the right way?

Hi,
Please refer to the following documents, it should be helpful.
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1
Regards,
Hussein

I am unable to install the latest version of Muse 2014. When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up wit

When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up with 'Muse is downloading now'. It will then take me back to the Muse app again with the same 'install now' message. The new version has not installed, could some one please let me know the reason why it isn't installing.

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

My iPhone 4s says that my software version 5.0.1 is up to date. Why am I not receiving the notification that the new update is available for me to download?

I have an iPhone 4s, not jailbroken. I was able to update to 5.0.1 when it came out last year. When 5.1.1 came out, I noticed that I never received the
notification that a new update was available. I updated my 2 ipads and my wife's iphone 4. I didn't bother looking into it, since I didn't feel the need to update to 5.1.1. Now I want to update to ios 6, but when I go to Settings > General > Software Update. It checks for updates , but still shows me that my 5.0.1 is up to date. I plug into itunes and check for update there and it still indicates that 5.0.1. is up to date as well.
Does anyone know what this is happening and how I can update to ios 6?
Thanks for the input.

muneer86 wrote:
hi, i have iphone 4s with version 5.1.1(9B206). im unable to update the version to ios 6? if im updating my phone in middle it says this an error occur while updating . can anyone help me to update my phone to latest version?
Follow the instructions that were already given in this discussion.

Automatic MOLAP cube : Proactive caching was cancelled because newer data became available

When I process the cube manually after processing Dimension, It works fine. But when I append data into database column, It performs proactive caching, at that time it fails.
Sometimes: It does not get key attribute because measure gets processed before dimension
and sometimes it gives error:
Proactive caching was cancelled because newer data became available Internal error: The operation terminated unsuccessfully. OLE DB error:
OLE DB or ODBC error: Operation canceled; HY008. Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'call dim Monthly 201401 2', Name of 'call dim Monthly
201401 2' was being processed. Errors in the OLAP storage engine: An error occurred while the 'MSW' attribute of the 'call dim Monthly 201401 2' dimension from the 'callAnalysisProject' database was being processed. etc....

I have also seen this error occur in other scenarios.
In the first if you have set Pro-Active caching to refresh every 1 minute and your query takes 2 minutes to refresh the error above can be displayed. Solution increase your refresh time or tune your Pro-Active caching query.
In connection with the above if your server is limited on available resources this can also cause the slower query response times during refresh and the message above.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Hi,
I scoured the web looking everywhere for a solution to this.
Exit Code 15
OSX 8.5 with Work@Home DVD media for CS6
I followed instructions to run 3rd party cleaner software
I tried the adobe removal tool
removing all copies of adobe software manually
installing from a new account, safe mode, plist everything suggested that i found did not work.
A colleague suggested that removing the below folder would allow the installation:
/Library/Application Supports/Adobe
They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
Cheers,
Smokey

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

Hi Christianjr,
When you say you reset your network settings, what do you mean, exactly?
I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
If none of those things work, then need to have details on what you did to reset your network settings....
Cheers,
GB

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available. I'm using iTunes 11.3 on a MacBook Pro, OS X 10.6.8. I can't save my library in iTunes, the message just keeps popping up.

From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Although there is no formal list of OSX error code some of the old codes still apply to OSX .)
First, try simply restarting your computer.
Try quitting iTunes, then deleting the .xml (not .itl !) version of the library file in the iTunes folder (iTunes will generate a new one).
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814 - various things to try.
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/ts1277
Troubleshooting permissions issues in Mac OS X - http://support.apple.com/kb/HT2963

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it says that my Muse is up to date. It was last updated in May but you have a new update today and it will not update. I thought maybe I am not suppose to have the Creative Cloud update because all I have is the individual app Muse and the photography program. So I uninstalled the CC desktop. Then when I open Muse it says I need the CC desktop to help with the update. So I get stopped either way. Now I also had a Pre-Release Muse on my computer and I don't know if that complicated things. Please advise.

All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
Are you on Windows or Mac? What OS version?

Problem while creating a new project template

I am trying to create a new project template under one operating unit newly created.
I am using P A Super User responsibility for that operating unit.
In profile setting the above responsibility has been assigned the new operating unit under Mo operating unit profile.
Now when I go to Setup>>Projects>>Project Templates and click on New, the form to create new Project template opens up but in the field where I have to select the operating unit, it shows no values in the LOV.
Can anyone please help me to know what setting do I have to perform so that I can select the operating unit in this new Template creation Form.
Regards
Hawker Hunter

Dear Mr. Govind,
we have followed all the Project Implementation Setup for the new operating unit except for the Implementation options which we have to fill up for each operating unit.
In the implementation Options form in the first tab 'System' there are many fields to be filled up.
For 'Summarization period Type' we choose 'G L Period' and based on this the fields 'Calendar Name' and 'P A Period Type' automatically gets populated.
But in our case the 'P A Period Type' is not getting populated.
Can you let me know where we can link the 'P A Period Type' to the chosen 'Calendar name'?
Also there is a check box - 'Maintain common PA and GL Periods'. If we tick this check box, a message says: 'The Period Type and Calendar of the PA Period does not match the Period type and Calendar of the corresponding GL Period.'
Can you please let me know where to create the PA Period based on the corresponding GL periods?
Regards

An error occured while generating a new report template

I have installed the Crystal Reports 2008 V2 and also the support pack. Installed the SAP Integration Kit XI 3.1 and the latest service pack 2.7. When I try to use the SAP Tool bar from Crystal Report , I can connect/see the queries but when I select any query to create a report I am getting an error message
"An error occured while generating a new report template". Any advise ? How do I turn on the trace in the client ?
Thanks,

Hi,
Did you update your Fix Pack...
Here is solution for Client...
To turn tracing on for client applications, you can use the following steps:
1. Click Start > Settings > Control Panel > System > Advanced > Environment Variables button.
2. Under the User Variables, add the following variable and value:
For Enterprise XI:
Variable Name: BOE_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logs
For Crystal Analysis, Crystal Enterprise, and Crystal Reports version 10 and earlier:
Variable Name: CRYSTAL_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logging
Regards,
Bashir Awan

New HD Templates available

Similar Messages

Maybe you are looking for