New headset issue

Hi, last November 7, i bought my first blackberry, 9360 to be specific. after trying everything it seems that when I'm listening to my music with full volume doesnt sound good. It sounds really bad. does any one experiencing this too. coz if ever I'm the only one got this kind of new headset. i will be asking for a replacement. pls reply guys. need your help.
thanks,
Jover

pegs4art,
Being able to have a conversation clearly is definitely important when using a phone and it does concern us to hear you are having this issue. We will work together to get this resolved for you however. I would just like to clarify a few things to make sure we are on the same page. When you say headset are you speaking of the phone itself or do you have headphones? Do you notice the same result when you are using the speakerphone?
CandiceH_VZW
Follow us on Twitter at @VZWSupport

Similar Messages

New headset, but certain programs are transmitting sound through speakers and not headphones.

Spoiler (Highlight to read)
Hello,
Hello,
I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
This question was solved.
View Solution.

Hello @LayneStaley,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
1. Click the Start button
2. Click Control Panel
3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
7. Click Apply.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Curve 8330 Stereo Headset Issue.

Hello, I purchases a new Curve 8330 a few days ago and the headset which was included with it (the 3.5mm 4 Pole Stereo Headset) does not work when I play music from the Internet or from the Media. It also doesn't work with any calls. The volume always comes out of the speaker in the phone, not the headphones. Is the headset exclusively for Bluetooth use? My iPod headphones work on my Curve and the Curve headphones work with my iPod, so I'm confused.
I read the previous posts related to headset issues and I couldn't find an answer to this. Thank you!

I'm having a similar problem... my blackberry headset does not work properly. I mean.. it was working when I first got it-- and then all of a sudden, it stopped. It was cold outside, and I never really thought about it again. I was frustrated... and about a week ago I called tech support to inquire...
They siad my blacberry headset jack was most likely damaged, as:
My boyfriend also has a blackberry, and I had the same problem with his out-of-box blackberry headset. (It would work, and then not work unless I pulled it out of the jack slightly).
Regular headphones I use with my ipod worked just fine in my blackberry (curve, by the way).
My headset worked in a sales associate phone when I took it into the store. Granted... my store doesn't fix blackberries-- they just have you send them in.
Luckily... I'm under warently. I wish I weren't so in love with this phone... it seems to be really fragile. My last one was coming apart at the seams in the back around the battery come day 2....
... wait until you try to upgrade your phone's software...... whew. It's rough.
--- ps. it's working plugged in right now and i'm indoors...

Looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only?

looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only? Can appl,e has any plan to migrate their Ipad 2 customers to use or take new Ipad with some exchange offers ?
please I expect a quick responce to my queries. I am waiting eagerly what to do now?

Ipad Air dead after installing IOS 8.0.2
I have just downloaded and installed this version of IOS on my Ipad Air and it is DEAD.
It won't start up.
When I connect my Ipad to my MacbookPro, Itunes tells me the following:
"iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
What now? restore? try to remove 8.0.2?
what a misery!!

New ARB Issue: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
 
 
 
A new ARB issue has been posted to the flex open source site: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
 > contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

New format issues

Hi,
I guess these might be issues with incomplete migration to the new format but I'll post them here nevertheless:
Incorrect post count - The "total number of posts" in the user information seems to reflect the total number of posts online at the time of the transition instead of total number of posts to date
Joined date changed - the "date joined" in the user info seems to have changed for me - no biggy but this might point to other problems
Incorrect migration of old formats - the old discussions had the editor shortcuts "ii " at the beginning of a new line to create italic text - all these post now display "i " at the start of such lines (with the text not being in bold)
Level info missing - according to the help file, a user should be able to see his/her level per topic as well as overall - I was not able to find this information at all
But then, I am happy to see that you are keeping to make improvements to this forum and I thank all of you for your work - I am especially happy about the new "Preview" button for new messages!
Andreas

Another items is:
Email Notification do not use subject of topic -
In old system the email notifications showed for example "New Formatting issues", or "Re: New Formatting issues". On new system email notifications so as example:"Apple Discussions forum "Feedback about New Discussions" has been updated by Andreas Amann", or "Apple Discussions forum "Feedback about New Discussions" has been updated by John Smith", and so on. Makes it impossible to thread post by topics because all notifications only change if the post is from another group.

Testing new headset

I am new to a mac and I need to know how to test a new headset with microphone to see that it is working.

go to apple system prefs and click on sound then click input and select the input you want and watch the meter plus make sure the the input volume is loud enough

Iphone 6 headset issue

Issues I have when playing music trough my headset
- When I plug inn my headsett, music starts to play automatic.
- If the cord bump into things, musikk stops (cant listen to music with phone in pocket)
- Somethimes Siri starts
- If i press down the cord the muic stops and start.
This is on a new iphone 6, 64g
I have tried diffrent headsets, same problem.
Any idea what to do?

Any one have any suggestions?

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

New iMovie '08 problems -- FireWire or new device issues?

Not sure if this is an iMovie '08 problem or an OS X problem. Here's the story --
Prior camcorder was a Panasonic, MiniDV format. Hooks up nicely with iMovie, via FireWire (400). I also have a WD My Book (500 GB) device to store the raw data (Event Library), which connects via FireWire (800). In the past, all three devices (Panasonic, My Book and MacBook Pro) all played nicely together.
Fast forward to now. Bought a new camcorder (problems with the Panasonic). It's a Canon ZR950 (MiniDV). With iMovie running, I first connect the WD device which is successfully mounted. I then hookup the new Canon and within a few seconds I get an error about a "device not cleanly shut down" (or words to that effect). Odd .... and when I try to connect to my new camcorder, I get a "no camera connected" error.
Rebooted, retried .... same issues. Another time I first connected the Canon and this time, iMovie successfully sees it. I go to connect the My Book and then the camcorder drops out.
So, it seems I can have only one FireWire device connected at a time, which is odd since I didn't have this issue with the old Panasonic.
Help!

Interesting that you based your purchase on CR magazine because I too use it like a bible. However, when it comes to video cameras, I think they are way off base when not considering the editing side of video making that goes along with any camcorder. Who shoots video simply to plug it into a TV for playback?? If they were doing responsible reporting on this particular subject, they would also include computer capture and editing details in the reviews. Lots of the new format cams don't even work with Macs and the ones that do generally give lesser quality after conversion than what you can still get with tape. At least you made the right decision there!

Opening a form in a new window issue

Hi..
I have this requirement where I have this page(say XYZPG.xml) which contains a table which is auto populated based on a particular setWhereClause and all this happens in the processRequest as the page loads.
This page opens on clicking a button in a previous page from where all the parameters for the setWhereClause is sent using fireAction.
Each Row in the results table in XYZPG has a "detail" button which opens another page in a new window using _blank in the Target Frame.
The issue is that when Iam clicking the "detail" button,the new form opens in the new window and after closing the form that opened in the new window when I start to perform any action in XYZPG a null pointer is encountered in the processRequest while trying to fetch the setWhereClause parameters.
Please help in this issue.Its urgent.
Thanks

That's because when you close the child window, control returns back to parent form's processRequest. Which version of EBS you are working on? OAF has in-built popup windows feature supported on latest EBS versions which is very useful on many occasions as it has good features like popup closing automatically when a submit button is clicked etc. Check JDev user guide and see if you can use popup windows for your project. If not, you have to capture the event in processRequest and perform required actions again.
Thanks
Shree

Help me find a new headset for iPhone!

Apple sure can design some awesome products, but sometimes they think a little too different or not different enough on the simplest things. Like their mice. The Mighty Mouse has some awesome functionality, but I never owned one whose scrollball lasted more than a few months. Their earbuds suck too. The problem is so simple: the speaker on each earbud is placed so that your ear canal never receives the full sound. It almost seems deliberate. Why, even after a redesign, are the centers of the speakers placed in the middle of each bud, even though the wire coming out of each bud is off center so that it can slide into your ear and rest on your tragus. How can they not see the problem? The sound quality is actually not that bad, but you never get to hear it all without shoving the buds farther in with your fingers.
That's what I like about Sony's earbuds.
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=1055 1&storeId=10151&langId=-1&productId=11038782
You can't see it there, but the speakers are placed closest to where the bud meets the ear canal. You get more sound. And they're also really affordable.
It's just too bad that Apple doesn't want you using any earbuds other than their own on iPhone! The headphone jack is under that friggin' opening that just so happens to allow the supplied headset to fit perfectly snug in it. My L-shaped Sony connector doesn't fit. But even if I could get it to fit, it would be hard to give up that little remote/mic combo that Apple's supplied headset has. It's a headset that's cool and crappy at the same time.
So what would you recommend? I listen to music a lot on my iPhone, so I want better sound than Apple's willing to offer. However, I also want to be able to pause and skip music and answer calls without showing the world I own a hot new iPhone. What solution offers the best of both of those worlds as well as comfort? Bluetooth, wired... it's all good.

Keep in mind, they do not (yet) have the button
included with the mic, the next version will. From
v-moda:
"The first generation VIBE DUOs do not have the
control button. This keeps them lightweight for an
active lifestyle and universally compatible with all
cell phones with the use of an adaptor. The next
generation of the DUO, set to come out next month,
will come equipped with the answer/play/pause/skip
control! This handy feature will provide the
convenience you are accustomed to, but it will only
be compatible with the iPhone. Keep checking our
website at www.shop.v-moda.com for updates and
release dates.
Rock on,
Thanks for the heads up. I knew there was a reason I had not ordered them yet. I guess I can wait a little bit.
What I would REALLY like to have is a set of Bluetooth headphones! I've seen a pair for iPod but not specifically iPhone. They do use a little adaptor but I'm hoping someone will come up with a more elegant design. I really wish they had just built in A2DP in the first place.

FI-New GL Issue - Inconsistencies in time of creation in Table FAGLFLEXA an

Hi,
We are facing the following issue in ECC 5.0 with New GL Active
When a journal entry is created, the current time is captured (EST) at the header level of the document and is available in the BKPF table. The same document is also updated in FAGLFLEXA table. However, in this table the current EST time is not shown as the time at which the document posted. It is showing corresponding GMT time.
So for example if the document is created at 13:00:00 EST, in BKPF the time shown is 13:00:00. However in the FAGLFLEXA table, for the same document, the time stamp is 18:00:00. (which happens to be GMT time).
This is resulting in inconsistencies with respect to BW extraction.
All the configuration relating to time zone at the general settings level are set to EST.
If any of you have faced this issue and resolved it, please inform as to how you had resolved it.
Regards
Kiran I

Hi,
Use the safety interval (lower limit) as a buffer.
Safety interval = Difference ( EST - GMT) + Actual safety interval (example 1800 s).
Hope this helps.
Kind Regards,
Kurt

N80 V4 still has bluetooth headset issues

As above really, thought this was resolved in the new firmware, but i am still having major problems hearing anything through the headset. It connects and pairs fine, and connection seems stable, but regardless of me changing the volume, i still can't hear anything through either a Sony Ericsson or Plantronics headset.
Any ideas as to a resolution, or am i stuck with this annoying bug till the end of time....?

The solution is very simple guys, though not pleasing to your hip pockets.
Ultimately, Nokia has never been able to get the Bluetooth technology reasonably compatible across all other brands. It was atrocious at the first inception of it back in 2001 and whilst vast improvements were made over the years, the reality is my theory continues to remain true. That theory is, Nokia bluetooth audio products are the only products that work best with Nokia bluetooth capable phones. They don't work necessarily 100% (I lost count as to how many times I had to power cycle my HS-4W headset before it got stolen), but they do give you more mileage than a 3rd party product. The only exception I find to this is their ridiculous move with the 610/616 car phone kits in which several handsets made after 2005 seem to work only with the later model 616 car kit thereby forcing the user to spend more money. What's the point of going bluetooth if Nokia is going to screw the customer like this?
Until Nokia learn to get it right, preferably using a Toshiba or Sony Ericsson based chipset, bluetooth audio will continue to be an absolute pain in the **bleep** outside of the Nokia accessories realm. Of course, maybe Nokia has a method behind this madness in terms of cornering the bluetooth accessories market but they won't fess up to that.

New iTunes Issues

I share my iTunes Account with my family, we all have our own computers with libraries so this has never been an issue. However when iTuens updated the new verison has ALL of our music on my libary page, and it comes up in shuffle. How do i Remove their music from my library?

Have you tried this?
1) Press and hold the button marked Menu then, whilst holding this button down -
2) Press and hold the white 'select' button (in the middle) for about six seconds until a grey Apple Logo appears on screen.
Wait for a few seconds more until the screen lights up again and/or your playlist appears once more.
Hope this helps

New headset issue

Similar Messages

Maybe you are looking for