New Homehub - Lots and lots of errors?
Hi,
I recently upgraded to the black homehub 2.0 (version A even though I asked for a version B) from my old white version 1.5. Plugged it in, everything went smoothly. The download data is half what it was before, but Im guessing it'll settle out in a few days or after a few power cycles as the broadband is a bit unstable at the moment (off and on.. off and on..)!
The weird thing is, is that Im getting a ton of Errors apparently, I dont know if its normal so I thought I'd post here and find out!
ADSL line status
Connection informationLine state Connected
Connection time 0 days, 0:01:50
Downstream 2,902 Kbps
Upstream 547 Kbps
ADSL settingsVPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.3
Latency type Interleaved
Noise margin (Down/Up) 6.1 dB / 6.0 dB
Line attenuation (Down/Up) 64.0 dB / 39.0 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 11
Loss of Signal (Local) 1
Loss of Power (Local) 0
FEC Errors (Down/Up) 390 / 4
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 20
Error Seconds (Local) 2
Is this normal, or has something gone wrong?
Regards,
Tom
Dont worry, I repasted all the hub details but forgot to update the previous paragraph . Speed has returned to normal now at around 2200. Its already in the master socket, so I'll just plug it into the test one.
Before plugging it into test socket:
ADSL line status
Connection informationLine state Connected
Connection time 0 days, 0:01:32
Downstream 2,336 Kbps
Upstream 563 Kbps
ADSL settingsVPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.3
Latency type Interleaved
Noise margin (Down/Up) 1.5 dB / 6.4 dB
Line attenuation (Down/Up) 62.0 dB / 39.0 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 22
Loss of Signal (Local) 12
Loss of Power (Local) 0
FEC Errors (Down/Up) 9219 / 0
CRC Errors (Down/Up) 356 / 2147480000
HEC Errors (Down/Up) nil / 8
Error Seconds (Local) 7
Plugged into test socket:
ADSL line status
Connection informationLine state Connected
Connection time 0 days, 0:01:01
Downstream 2,983 Kbps
Upstream 520 Kbps
ADSL settingsVPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.3
Latency type Interleaved
Noise margin (Down/Up) 5.8 dB / 5.5 dB
Line attenuation (Down/Up) 62.5 dB / 39.0 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 33
Loss of Signal (Local) 15
Loss of Power (Local) 0
FEC Errors (Down/Up) 749 / 0
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 8
Error Seconds (Local) 172
I also have a ADSL plate on my master socket (it has a microfilter built in) so to test the test socket of course I plugged in an external microfilter.
What does these results say, the internet has been dodgy all day.. not staying up for ages (but reconnecting quite quickly).
Thanks,
Tom
Similar Messages
-
getting error code 8003 when trying to empty trash, lots and lots of stuff in there but it won't let me empty the trash.
Thomas...
Try Trash IT for Mac > http://www.macupdate.com/app/mac/8214/trash-it!
It helped users with the same issue here > https://discussions.apple.com/message/16995454#16995454 -
Lots and Lots of video tracks...
Hello Ya'all:
Just reporting some bugs/discoveries I made in FCP 5.0.3, when using storage which is almost infinetesimally fast. I know FCP supports a maximum of 99 video tracks, but I wonder how many have actually been tested (realistically): Here's some problems I have when doing lots and lots of video tracks:
Qty. Description
Up to 10 Fine - no problem.
12 Program intermittently crashes with no error, when
sitting idle.
14 The scroll bar on the right side of the video
portion of the timeline stops drawing properly,
but the crashing above goes away.
16 Crashing is back - scroll bar still not operating
properly.
20 Crashing stops, but scroll bar still not drawing
correctly.
24 Same as above.
25 Seem to have hit some sort of maximum, as the
video portion of the timeline header turns red.I rant for lots of reasons...as does Jim.
I rant when someone with NO CLUE as to the post production process tries to tackle a complex process thinking that FCP is easy. Especially when said people, who previously edited home movies or short films on FCP, suddenly think they can edit broadcast television.
I rant when people think a simple plugin will edit for them, or suddenly make everything ready for broadcast.
I rant when someone assumes that FCP can do something it cannot, and is mad for FCP not being able to do it.
I rant when people don't do their research, buy gear, shoot hours and hours, only to find that it won't work on ANY system...and they blame the system for not working with the new gear, even though the gear came out AFTER the system.
But mainly I rant for the first reason. Too many people think that editing is easy and that they can just buy a G5, monitor, camera and a few books and be ready for Prime Time. No no no. Even Robert Rodriguez, the ultimate film rebel, took a long time to learn what he learned. I have spent a large part of my career learning post production...broadcast standards, specs, color correction, show timing, audio post...not to mention the art of storytelling. And it really gets on my nerves when someone thinks that they can take an Mac Mini and camcorder and edit a broadcast show...and get angry at Apple for things not working properly.
Get the proper tools. Get the proper training. Cut your chops by editing a lot and a lot and a lot. Research everything before you buy and jump into a project with a huge deadline. I am venturing into HD...I start editing next week...I have been researching the topic since July and am STILL testing gear and my workflow.
I am sure there are plenty more reasons I rant, but those are the ones off the top of my head. I just have little patience with people who think that editing is easy and instantaneous. It is hard and time consuming, and if I didn't love it to death I wouldn't do it.
Shane
"There's no need to fear, UNDERDOG is ranting!" -
Hi there,
I have used illustrator now for a long period of time. Recently I purchased Adobe CC. Had no problems with it untill now.
It's like this. Whenever I try to make a circle (or, square, line or other forms) Illustrator makes lots and lots of more circles within it.
From the moment I click on the page untill I release my mouse, it keeps making circles. (see enclosed picture)
I have really no idea whatsoever how to undo this. I have used Illiustrator CC before for another project, and it worked fine. Now however, it doesn't.
Can anyone help me out here? I have payed projects to deliver, and I really need this to work really soon...
Thnx for your help!
btw, I work on a PC with Windows 8. (don't really think it's relevant, but still..)Thnx!
I didn't know that could cause it. Which is actually weird since I've recently bought a new laptop. >,<U
Thnx for your help! -
Initial Faces scan skips lots and lots of photos
I have over 5000 photos. My initial scan took about 30 minutes. I thought it was fast, now I realize it was TOO fast - lots and lots, I'd guess over 50%, of photos were skipped.
When I look at the photos, some have boxes around the faces but most do not. It skipped even extremely clear, front view, unobstructed faces.
I took the advice of others here and deleted the "faces" files within the iPhoto package and restarted. Again the scan was really fast but flawed - I saw the same result with lots of photos seemingly skipped.
I verified by taking some photos that had NO face recognized (high quality - closeup, unobstructed front view of a child). I exported them, then re-imported into iPhoto. On importing, it did find all the faces.
This proves to me that the initial scan is FLAWED and skipping photos. If it found a face on re-importing, it should have found a face initially.
I see other people here are seeing the same behavior. Comforting to know that I'm not alone, but VERY frustrating. I don't want to take days and days to draw my own boxes around faces if there's a chance that Apple will release a fix for this.My initial scan failed (as in not one single face box inserted). I deleted the files and started it over, and it seemed to work okay. No, it didn't get every face, but it did quite a few.
But then I imported a large number of new photos, thinking I should finally consolidate my numerous photo libraries on separate computers... and iPhoto didn't find faces in those either.
It seems like if I import a small number of photos (<200 as an estimate) it does scan them, but any more than that and it screws up. -
I just got a new iPhone 4 and the (-1) error keeps popping up on my screen as it is restoring filmware, what's wrong with it?
when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email
-
Please help me! What can I do to stop receiving lots and lots of emails with all participants questions? I tried what was suggested but it didn't work.
You got your answers in this thread here and you marked it as correct.
https://discussions.apple.com/message/16541734#16541734
When you get to the email preferences page to make the changes, did you click on "Save" at the bottom of that page to lock in the changes that you made? -
Connection errors (lots and lots of them) between HDV and FCP 6
So this is a tragedy for me so far. I have a $3500 Cannon XH A1, and an equally expensive Macbook Pro. The problem is, I can't get a connection via firewire between the two. I've changed the presets a bunch of times to what I think the correct specs are, nothing has worked. But when I flip on the the right settings on my school's computers (which run FCP 5), it works fine.
I'm out of ideas. I've updated everything, I even tried this pointless apple tutorial telling me to delete QT receipts. Can anyone help me?Well, it might take a bit of time to straighten out, but probably not a tragedy.
First, was your move to 10.5.1 a clean install? If you just installed over the old OS, problems can arise. Worst case scenario is you'll have to strip the drive, reinstall the OS and updates, then install FCS 2 and the updates.
But, some things to try first:
Shut everything, computer, camera, etc. off
Connect the camera to the mac via firewire, and remove any other firewire connections, even if the other connected equipment will be off (unless, of course, you'll be capturing to an external firewire drive).
Turn the camera on to VCR mode, load the tape. (I'm assuming you want to capture TO FCP, not print back to video.
Now turn on the Mac, fire up FCP. If any projects open with it, close them.
Now, choose an Easy Setup; probably HDV 1080i60, or another HDV preset.
Next, open a new empty project, and open the log and capture window.
Are you now able to control the camera from the keyboard? And, are you able to see your footage in the log and capture window? If so, proceed with the capture.
If this doesn't work, you may want to erase and reinstall everything on a clean drive. -
I bought a new Macbook Air, and got an error when trying to register it with my Apple ID
So, I bought a new Macbook Air and tried to register it with my Apple ID, however I get an error about the product being already registered.
I haven't registered it yet. How can I fix this?A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best. -
Brand new white Macbook - lots and lots of scratches all over!
I have recently purchased a white Macbook, and after less than a week of usage, I have noticed countless smudge-looking scratches all over the outer case. Both the top and bottom are covered with them; they only show up when reflecting light, and aren't deep (i.e., you can't feel them or anything).
I did not notice this before, but I'm not sure if they've been there since I got it. I haven't been putting it in a case or anything yet. This is upsetting to me since everything else about the computer is great, it's been a good first mac experience otherwise.
Is there a way to bring it into a store and swap out the case without much of a wait or delay? Or am I better of trying some kind of cleaning product?
I'm just disappointed that I have to do something like this within 4 to 5 days of owning the thing. I am very careful with it and I don't understand how I could have done anything to leave so many marks this quickly.I completely understand your frustration with the scatches - it's a new computer and you spent a lot of money for it.
But - remember - its just a tool, and as long as it works great, you're a winner. Besides, after few months you'll wont treat it so carefully anymore. -
I work at a nonprofit, and we've just been given a new
website provided to us by a team of volunteers. However, the
template has some minor typos that I need to fix. Whenever I save
the template, I get error after error, primarily along the lines of
"Unbalanced #EndEditable tag" or "Nested Editable Regions," but
some others have popped up, too. I can't ignore the error, either,
because the rest of the pages in the site won't update.
The volunteer team was working in two different versions of
Dreamweaver, and the following part of the code seems to be source
of several of the problems. There's two different versions of the
"begineditable" and "endeditable tags," with a section beginning
with "#begineditable" and then containing a
"templatebegineditable." When I try to standardize the tags or
remove them from within each other, the content region drops to
below the left nav. I don't understand what's happenning, or how to
fix it. Any ideas?
Thanks,
Jodi
<!-- BeginEditable "leftnav" -->
<table width="205" border="0" cellpadding="0"
cellspacing="0">
<tr>
<td height="32" align="center"
background="../IMAGES/left_nav_top.gif" bgcolor="#FFFFFF"
class="nav_links">
<!-- TemplateBeginEditable name="left_nav_title" -->
<table width="190" border="0" align="left"
cellpadding="0" cellspacing="0">
<tr>
<td class="nav_links_title">About Page </td>
</tr>
</table>
<!-- TemplateEndEditable -->
</td>
</tr>
<tr>
<td align="center" valign="top"
background="../IMAGES/left_nav_middle.gif" class="text">
<!-- TemplateBeginEditable name="left_nav_sections"
-->
<table width="190" border="0" cellspacing="0"
cellpadding="0">
<tr>
<td height="25"><img
src="../images/button-arrow.gif" width="13" height="13"><span
class="nav_links">About
Us </span></td>
</tr>
<tr>
<td height="25"><img
src="../images/button-arrow.gif" width="13" height="13"><span
class="nav_links">Board
of Directors </span></td>
</tr>
<tr>
<td height="25"><img
src="../images/button-arrow.gif" width="13" height="13"><span
class="nav_links">Meet
Our Staff </span></td>
</tr>
<tr>
<td height="25"><img
src="../images/button-arrow.gif" width="13" height="13"><span
class="nav_links">Partners</span></td>
</tr>
<tr>
<td height="25"><img
src="../images/button-arrow.gif" width="13" height="13"><span
class="nav_links">Funding
and Financials </span></td>
</tr>
</table>
<!-- TemplateEndEditable -->
</td>
</tr>
<tr>
<td height="32" align="center" valign="top"
background="../IMAGES/left_nav_bottom.gif"
class="text""> </td>
</tr>
</table>
<!-- #EndEditable -->
<table width="205" border="0" cellpadding="0"
cellspacing="0">
<tr>
<td height="32" background="../IMAGES/left_nav_top.gif"
bgcolor="#FFFFFF" class="nav_links"><font color="#000000"
class="nav_links_title">What's your
Footprint?</font></td>
</tr>
<tr>
<td background="../IMAGES/left_nav_middle.gif"
class="text">
<p><a href="
http://www.myfootprint.org"
target="_blank"><img src="../images/logo_eco_fp.gif"
width="180" height="80" border="0"></a>
</td>
</tr>
<tr>
<td background="../IMAGES/left_nav_middle.gif"
class="text"><a href="
http://www.officefootprint.org"
target="_blank"><img src="../images/logo_off_fp.gif"
width="180" height="26" border="0"></a></td>
</tr>
<tr>
<td background="../IMAGES/left_nav_middle.gif"
class="text"><a href="
http://www.kidsfootprint.org"
target="_blank"><img src="../images/logo_kid_fp.gif"
width="180" height="28" border="0"></a></td>
</tr>
<tr>
<td background="../IMAGES/left_nav_middle.gif"
class="text"><a href="
http://www.ecologicalfootprint.org"
target="_blank"><img src="../images/logo_nat_fp.gif"
width="180" height="51" border="0"></a></td>
</tr>
<tr>
<td background="../IMAGES/left_nav_bottom.gif"
class="text"> </td>
</tr>
<tr>
<td height="32" background="../IMAGES/left_nav_top.gif"
bgcolor="#FFFFFF" class="nav_links"><font color="#000000"
class="nav_links_title">Learn about
EJCC </font></td>
</tr>
<tr>
<td background="../IMAGES/left_nav_middle.gif"
class="text"><a href="
http://www.ejcc.org"
target="_blank"><img src="../images/logo_ejcc.gif"
width="180" height="60" border="0"></a></td>
</tr>
<tr>
<td height="14"
background="../IMAGES/left_nav_bottom.gif"
class="text"> </td>
</tr>
</table> </td>
<td width="803"> <!-- #BeginEditable "content"
-->
<table width="763" border="0" cellspacing="0"
cellpadding="0">
<tr>
<td height="31"
background="../images/content_top.gif"> </td>
</tr>
<tr>
<td background="../images/content_middle.gif">
<!-- TemplateBeginEditable name="content" -->
<table width="760" height="491" border="0"
cellpadding="0" cellspacing="0">
<tr>
<td class="text"> </td>
</tr>
</table>
<!-- TemplateEndEditable -->
</td>
</tr>
<tr>
<td height="31"
background="../images/content_bottom.gif"> </td>
</tr>
</table>
<!-- #EndEditable --></td></table>
<!-- #EndEditable --></td>
I think somebody worked on the page with dw3 or dw4.
If the code you showed was from the Template, it should work
if you strip
out the #BeginEditable and #EndEditable and leave the
TemplateBegin and
TemplateEnd.
Then scan the code to see if all template syntax is correct,
and everything
you need to edit is in an Editable region. dw
menu-->modify-->Templates-->Check template syntax.
My guess is the dw4 person made one big editable area, and
the MX or newer
person put in a group of distinct editable areas that are now
nested inside
the old template syntax editable area.
Strong Suggestion- Make a backup copy of the site's Local
Site Folder before
doing anything- template syntax problems can cause loss of
content.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Lots and lots of hotplug output
i recently tried copying my arch install from one partition to another partition. i just used cp...i think it works so far, everything seems to work as before.
but i got a new problem that's annoying. hotplug during boot would display a whole lot of useless info, which it never did before. what's most disturbing is that this affects BOTH partitions old and new. so i have no clue why or how copying partitions would do this.
anywho, the output is reproducable my restarting the daemon. this is the output:
[1;34m:: [1;37mStarting Hotplug Daemon[1;0m [71G [1;34m[[0;36mBUSY[1;34m][1;0m ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
[71G [1;34m[[1;37mDONE[1;34m][1;0m
any ideas to hide all that junk?reinstalling initscripts and hotplug didn't do the trick. i have a feeling it's probably the bash 3 update. i probably booted up to my old install, updated to bash 3, and then copied my partition over....so then both partitions displayed all that output.
anyways, i recompiled my kernel to have practically no modules (only my ati and iptables are modules). almost everything else is compiled in. most importantly the usb ones, cuz i have a usb keyboard and mouse. anywho, i can avoid all that ugly output....for now... -
How do I create an application with lots and lots of text?
I was asked to create an application for the iPad. This application contains a lot of static text. With "a lot" I mean Mb's of text which should be represented in a visual attractive way. One can think of this application as a website but than in application form with added features. When building this application there should be a couple of things kept in mind:
The modularity of the application. How easy will it be to add text or update it.
How does the markup for the text work. Should everything be put in labels? And what to do with images than? Or is there an alternative?
My question is: What is the proper way to setup this application? Preferably I don't want to manage the text myself. It will take ages to position everything correct. Especially since I will be working with artistic people...
Thank you for your help!You can always retrieve updated text (html or any other format) from a web service or other channels. That really is up to you. If you decide to stick with HTML, there is not too much benefit in paring HTML out of an XML feed.
-
PERIPHERALS - Lots and Lots of Peripherals
I love my G5 and am very happy I switched from PC to Mac, but for the life of me, I don't understand why there are so few places to plug in peripherals.
With lots of large files of photos and videos, etc., I have 4 external hard drives, as well as 2 printers, a scanner a digital card reader and a few other things to plug in.
I'm looking for an efficient way to deal with this, so I don't have to constantly be crawaling under my desk plugging and unplugging things.
Any suggestions would be most appreciated.
J.Thanks for your input.
I don't know what a lot of this means:
"Actually it's better to go with SATA PCI cards and drives, unless you already have a investment in Firewire.
For instance Sonnet has a 8 channel SATA PCI card and there are external powered SATA drive enclosures like the Mini-G.
Apple of course is trying to get you to buy their X-RAID hardware with Fiberchannel PCI card with 400 mb p/s and 3 TB max capacity.
I will go begin to look into it. In the meantime, if there's any light you could shed on this from personal experience, that would be helpful.
Do you have a set-up like this?
Why/how is this better than firewire?
Thanks.
J. -
hello thats pritty much it.. up there ^ i have a screen shot of lots of plugins while i was typing this firefox was using up 79kb wich is normal for my laptop but as i said before it uses up 200k+ kb i was wondering why and if this could be sorted thanks
That is a problem with the Flash plugin.
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
Maybe you are looking for
-
Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.
-
Why does object sequence change once exported to PDF?
I have a two-page spread that shows exactly how I want it to in Preview. But once I export to PDF the sequence of the objects has changed (blocking an object that needs to be on top). I can see the object when the pdf is opened, but just for a seco
-
Displaying the PDF ByteStream on to the browser?
Hi, I want to display a pdf on the browser. I have with me the byte stream, using which I need to display the pdf directly on the browser. Currently, I am storing it in my local file system by creating a file output stream. But its taking a lot of ti
-
Install linux 11.1.0.7
Hi, I am sure that this has been addressed before and if so please post a link to the appropriate thread. I am trying to find 11.1.0.7 for 32 bit linux. I have 11.1.0.6 and am not sure if I need an install download or to apply patches to my 11.1.0.6
-
Slideshow using Quicklook?
I recently upgraded to OS X Lion on my MacBook Pro. I'm trying to use the instant slideshow option with the quicklook button, but it isn't working. Previously, and what help says it should do, is select the images you want and press spacebar. Then th