New HP drives

I have lost the ability to print to my Photosmart 8450 and also been unable to install and activate my new AOI. I've reviewed all the posts about printing issues and pretty much concluded that the recent "upgrade" to 10.5.2 may have been the problem and that only new drivers would help. Sure enough there's a software update from Apple that I just noted today that included HP Drivers. I installed it but am not sure how to proceed from here. Any ideas? I'm was hopeful this update would get me going again-along with lots of other folks apparently.

Donald-I considered resetting the printer system but I believe in the process all existing printers are deleted. I do have an hp 1320 laserjet still functioning and it is my workhorse printer. If it deleted and can't be reinstalled I am in disaster mode. Also I have some concern that the most recent download for my photosmart 8450 is from 10/07-a lot of changes have occurred since then. But-I am running out of options so may give it a try the way you recommend. If I do I'll post the results here. Thanks.

Similar Messages

Have Old Hard drive and want to move old data onto new hard drive in imac.

I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.

Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage

New Hard Drive

After installing Leopard on my new hard drive (Western Digital Caviar Blue) I used Migration Assistant to transfer everything from the original hard drive that was still in the computer. It ran into some issues with 2 iTunes music files and transfer stopped. So I selected the option of continuing to set up. Not sure if I messed up there. After that was complete I trashed the files in question and ran Migration Assistant again, but it completely skipped iTunes and went onto Applications, where once again it ran into problems with Application Support Files from Adobe/InDesign Templates, etc.
Now I'm not sure what to do. The new HD is the 10.5.6 version (didn't run Software Update because I assumed Migration would automatically update everything) and of course the original HD is the 10.5.8. Should I run Software Update first on that followed by Repair Permissions then attempt to transfer everything again? Or should I start from scratch - erase and reinstall then run Migration again?
Also, with having a very large iTunes library is this the best way to transfer those files?
Thanks!

Hi-
Sorry, I may have been a bit obscure....
To be precise, one should boot to the OS X install disc and use Disk Utility to repair the original hard drive and permissions.
You can't repair the boot drive while started to it.
Permissions, yes, but not directory repair.
After that, restart to the usual boot drive, download and install SD!, let SD! do it's thing.
SD! will erase the target drive for the new clone, so using Disk Utility again isn't necessary.
Once SD! is done, you can open System Preferences/Startup drive, and select the new clone as Startup volume.
Restart, and check that all is as it should be (there is no reason that it shouldn't, but DO check).
Once the clone has been verified for function and content, you're all done.
A full clone of a large drive can take a while, so don't do this when you're in a rush.
Maybe start SuperDuper! and go have dinner or something......

Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one? If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)? If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not... By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis. You probably should have just moved your whole iTunes folder. Still, moving the media folder as instructed should not have messed up the library. Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files? How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you. I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
If you are in the USA you can download some previous purhcases with iCloud, but not all.
Here's a bit on what an iTunes folder should look like:
What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
Once you get iTunes working off the external drive it should just put new media to the external when you add it.
I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

How can I restore my iPod touch data to a new hard drive when the old one crashed

My computer crashed and I want to put the contents of my iPod Touch back on the new hard drive. How do I do this without accidentally Syncing and copying over my data? The vast majorioty of the music on my iPod is my own from DCs I own.

You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
Next, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials.
If possible, either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync. To do this, right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
http://support.apple.com/kb/ht1766
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
http://support.apple.com/kb/ht1414
B-rock

Suggestion for a new Hard Drive?

I'm thinking about replacing the 250GB hard drive that came with my G5 with a larger one. I'll relegate the old one to backup duties and the new one will end up being my new media drive. (Currently, I'm running my OS off a 150GB Raptor via a SATA card.)
I'd like to know what you'd suggest as a good 500MB-750MB drive to replace the existing one? I'm plan on using as a media / backup drive (for when the new OS comes out). I'd like one that's not too noisy, however. At one point I got a 320MB Western Digital that I ended up relegating to offline backup due to the whining noise it made when operating. It was noisy enough I could easily hear it above my computer's fans. I'd like something that isn't particularly noisy since it will be operating at all times.

WD would be my choice. Either 500GB or 750GB. And by the looks of it, the 750 is an excellent drive for replacing the (loud) 10K Raptor. I've noticed that Raptor bought couple months ago is much quieter than one from a year ago.
I have 3 x Caviar SE16 500GB, 2 x 320GB RE series, and 2 x 160GB RE as well. Along with a couple 10K Raptors and 3 x MaxLine Pro. The ML Pro run warm-ish and make more noise than Caviar.
Samsung 500GB would be quiet too.

Data migration from rescued drive to new internal drive

Need assistance! I recently experienced a hard drive failure on my MacBook (OS 10.5). Apple replaced my hard drive with a new one (running 10.6), and a data recovery company was able to resuce the data from my failed drive; they put it all on an external drive. I then used migration assistant to get my old data back onto the new drive. The problem is that my old home folder was encrypted with File Vault, so that data would not transfer -- i.e., my photos, music, bookmarks, old emails, etc.
I've tried booting up from the external drive, but no dice. The laptop sees the drive and looks like it attempts to start up from it, but it just keeps spinning. Are there any other tricks to access my old home folder in order to turn off File Vault so that I may transfer that data onto my new hard drive?

I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
The server is Win2003 with 4GB memory.
From Samson
Edited by: samson leung on Sep 21, 2009 6:40 PM

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

I purchased mountain lion from apple but never got a disk. How do I install it on my new hard drive, old hard drive failed and is not recoverable according to Apple and Recovery Specialist?

I have a mid 2009 MacBook Pro with newly installed SATA HD + SSD, I can get mavericks download free but I can't recover photos, apps, files etc from time machine (1TB Time Capsule), I think I was running lion when I started backing up on it but I had updated to mavericks before the HD Failure. When I tried to transfer info from Time Capsule it says " no volumes detected" or something to that effect. I had mucho info backed up on that capsule. Any help appreciated, please spell it all out for me if you can help, I am not at all tech savvy and desperate to get up and going as I am an online student with a fast approaching deadline for course paper. Thank you in advance :)

Step 1: Buy a new Hard drive that can be installed in your MacBook Pro later, and an External enclose to place it in for now.
The MacBook Pro before 2010 can not contain the stand-alone firmware to go to the Internet and get a fresh copy of Mac OS X and install it.
You will need a working Recovery_HD, or to drop back to a 10.6 DVD (if it will Boot on your Mac).
There may be a functioning Recovery_HD on your existing Boot Drive. If you were running 10.7.4 or later and Time Machine, there may be a Recovery_HD on the Time Machine Volume.
To check:
Hold down the Alt/Option key as you restart. This will slowly draw a gray screen and then add an Icon (over several minutes) for each potentially-bootable volume. If any Recovery_HD shows up, take it, and you will be able to get to Internet Recovery and re-download some version of Mac OS X that can be installed on a new drive.
It is generally far quicker to set up a new drive and install Mac OS X than to struggle with only the primitive tools available only on a DVD or a Recovery_HD. Once you get any version of Mac OS X running, you can get some work done and attempt to salvage first your data, then your drive (if either will be possible).
By NOT trying to Boot from and use the possibly-damaged drive, you improve your chances of being able to salvage some files off it, since blocks will not be over-written by running Mac OS X from it.

I have a G5 with a brand new hard drive,when I try and install the os I get a panic we are hanging error. What can I do to load the os

I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5

Yes, the hard drive needs to be formatted and OS X must then be installed.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
It's only a lost cause when nothing else works.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

Do I need a new hard drive & can I use Leopard?

I have a PowerBook G4 17" 1.5Ghz with OS X 10.3.9 on the original 80GB hard drive, I've been getting a lot of problems with the computer acting very slowly and getting 'hung up' with the color wheel spinning endlessly, during which nothing responds, I can't force quit, the only thing I can do is force a shut by holding down the power key. Sometimes it takes a long time to start up. I've tried re-installing the OS but still the same problems. I ran the Apple Hardware Test which gave this error code "2STF/4/3:ATA-100 ata-6-MASTER".
Does this all mean that my hard drive is going down and I need a new one?
Can I use any size hard drive e.g. a 250GB one?
Also - If I put a new hard drive in can I then install Leopard?
All info received with many thanks.

Welcome to the Apple discussions.
That code means there are problems with your hard drive. If you look at Disk utility (on your hard disk in applications/utilities) you may see that the S.M.A.R.T. status shows a problem. Or if you have SMARTreporter installed, it may not be green.
You can certainly use up to a 160GB hard drive. There was a discussion recently suggesting a BIOS (basic input output services) limit to 160GB ... I don't know if that's real or not.
If you do replace your hard drive, you might consider the slight price premium for a 7200rpm drive. You'll appreciate the extra snapiness in response time. And yes, you can install Leopard on it. After installing the new hard drive, boot from the DVD drive and use disk utility to format the hard drive in mac os extended (journaled) format. Then you can install Leopard.

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

Cannot Install OS 8.1 on new hard drive, 233 G3 Powerbook

Ok, so here's the deal.
I have an old Powerbook G3 Wallstreet. 233 Mhz 13" screen.
I recently ran into a problem where I booted up, and the hard drive (original 2GB) was erased. Completely reinstalled, and as soon as it rebooted after the install, the hard drive was empty again. Weird.
So, I decide to reinstall OS8 on a new hard drive. I have an older 20 GB drive from a compaq Armada M700, which I had replaced with a newer 120 GB drive, so I used that in the Powerbook.
Anyway, I've tried lots of things. Fully empty nonpartitioned drive, single 8GB partition by using MacDisk in windows, multiple 8GB partions, what have you. Disk Setup does not see any hard drive I place in the powerbook. I tried both the 120 and the 20 GB.
Any suggestions? I only have a Windows machine to work with, as the G3 is my only Mac. (Well, I have a graphite iMac, but it's suffering from the screen shrinking/power down problem common to those units, so I can't really do anything with it.)

ShatteredOne,
When you have installed the OS and restarted, did you get the blinking '?' alternating with a folder? If so, try resetting the PRAM to possibly correct this issue.
http://docs.info.apple.com/article.html?artnum=2238
Will the Wallstreet boot to the MacOS 8.1 CD? If so, try Drive Setup on the 8.1 CD again after resetting the PRAM.
The original Wallstreet shipped with a special OS 8.1 CD (green label) since the retail MacOS 8.1 CD will not have the necessary Powerbook G3 enabler file.
You do not have to partition the HD, but just make sure you are have formatted as HFS Extended although HFS Standard will work. However, on a large drive like the 120GB, you will have a lot of wasted space due to the block size.
If still having problems, install the original 2GB HD > boot to the 8.1 CD > open the utilities folder on the CD > Drive Setup and select 'zero all data' when you initialize; now run the Test Disk test and see if it passes. If it fails, zero/test one more time.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

New HP drives

Similar Messages

Maybe you are looking for