New i pad set up problem to connect wi-fi

I have difficulty to cneect wi-fi when I set up my new ipad

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Why can't I sync my I-Mac calendar to my new I-Pad? No problem with my I-Touch or I-Pod.

Why can't I sync my I-Mac calendar to my new I-Pad? No problem syncing to my I-Touch and I-Pod.

Do you have the settings in iTunes correct to sync the Calendar?
Perhaps you could try using iCloud to coordinate your calendars rather than syncing with iTunes.

New iPhone 5 set up problems

Hi all,
I have recently upgraded my iPhone 4 to an iPhone 5. I am in the middle of setting it up, and have come to the screen on the phone that says "Connect to iTumes". I did this and have put stuff that I backed up on to iTunes from my old phone onto my new phone. However, the new phone will not go past this screen and so I don't know what to do. I have disconnected it from iTunes, switched it off and on again to see if that worked, but it hasn't.
One problem I did have was that I accidentally upgraded my phone but downgraded its storage capacity . Should that make a difference to being able to get past this screen? I have chosen the photos and music that I want on this phone from iTunes and it said that there was just under 11 GB space left.
Thanks in advance for any help with this issue.

Hi, I've just realised I stated my old iPhone is the iPhone 4 but it's actually an iPhone 3GS.

With new update 6.1.3 problem wifi connection each time to connect

Hi every one
i am facing new problem with update iOs 6.1.3 wifi conectivity problem already we are facing battery problem if we comapre with apple company standard.
each time when i try to connect my wifi in my home lawn IPHONE 5 giving wifi connectivity issue. i am very worry about this issue!
apple is the still fast and soft usage phone in the world as we compared with modern use.
i request to apple please try to slove battery and wifi connection issue to make iphone 5 much pretty by his hardware and software
Thanks
Muhammad Ali

Save battery
1. Lower brightness (Major)
2. Turn off WiFi when not using
3. Turn off 3G when not using
4. Turn off Bluetooth when not using
5. Minimize use of Location Service; you can turn it off for certain apps
6. Turn off push notification (Major)
7. Fetch new data less frequently or manually
8. Turn off push mail (Major)
9. Auto-check fewer mail account

New Apple TV has 2 problems - internet connection and remote disk

Hi,
I have a TimeCapsule as main router, connected to a wired Modem for Internet access. My PowerBook G4 connects to it wirelessly using WPA2 no problems connecting to the internet and the TC disk.
I've just added and synced my new Apple TV which has thrown up 2 problems, not sure if they're related: after copying the WPA2 password, ATV connected successfully to the network, but can't find the internet. It has a correct IP address on the network, I checked that in settings. As it can't find the internet, it can't register for my iTunes account, so can't sync protected content.
On top of that it has problems syncing items on the TC Drive: I have my main iTunes library on the PowerBook G4 hard-disc, and that part synced fine, but most of my movies and TV Shows are stored on the TC disk due to lack of space on the PB. Although they're in exactly the same format as the items on the PB, when I synced, I got an error saying the file type was not compatible with ATV, so iTunes obviously has problems syncing items on the TC although it plays them fine on the PB (well it takes a bit of time connecting, but provided the TC is turned on, it plays them fine). I don't fancy moving them one by one onto the PB, syncing, deleting, etc so I need to get that fixed.
Any idea on why either problem happens, and whether they're related?
Thanks in advance.
Nadine xxx

The modem is an ethernet modem connected directly to the Time Capsule, not the Powerbook.
I checked my ITunes account, it says 3 devices can play my purchased material, so that would be my PowerBook, iPod, Work PC - AppleTV missing. I need to somehow kick it into connecting to Apple's Servers and registering with them, which it obviously didn't do at the initial setup.
The Network issue seems resolved - I started playing one of the movies that wasn't syncing on the PowerBook, which started the Network Disk, the sync obviously didn't try prompting the drive to wake up. It seems to be synching those films now (which obviously takes ages, so can't check for sure until later).

P67A-GD65 new system bios setting recommendations and sata connections

Hey all,
My old dual core HTPC (after many hours of use) finally gave up the ghost and moved on to the great PC grave yard . I have ordered all the new upgrade parts from Newegg and am looking for recommendations on what bios settings and setup procedures I should use on the initial bootup and Windows load. I'm not looking to overclock I just want a fast stable system for video decoding and playback. It's my understanding from the manual that SATA 1-2 are controlled by the Intel P67 chip and 7-8 are controlled by the Marvell chip but I am unsure of SATA 3-6. Can SATA 3-6 do raid 0? I want to use the Crucial SSD as my primary boot drive and the 2 WD drives on raid 0 as my secondary drive. SATA connection advice (which SATA ports) and Raid Bios setting would be helpful. Should I install the raid 0 drives after I have Windows 7 loaded on the SSD? Any other setup advice is appreciated.
Here is my setup.
Windows 7 64bit
Bach HTPC case
Ultra LSP 750Pro PSU
Intel i5-2500 3.3G CPU
MSI P67A-GD65 Motherboard
Sapphire HD5570 1G RT Video Card
Crucial CTFDDAC128MAG-1G1 SSD 6.0Gb/s SATAIII (Primary boot drive)
2 WD3200KS Hard Drives SATA 3.0Gb/s (Raid 0)
Lite-on 12X Blu-Ray Burner SATA
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600

Two questions answered. SATA 3-6 are controlled by the Intel P67 chip and do support Raid 0 but I still wonder if I should wait to install the drives until Windows has finished it's install.
SATAIII controller integrated in Intel® P67 & Marvell SE9128 chipsets
- Up to 6Gb/s transfer speed.
- Supports two SATAIII ports (SATA1~2) by P67 PCH
- Supports two SATAIII ports (SATA7~8) by Marvell SE9128
- SATA1~6 ports support RAID 0/1/5/10 mode by Intel P67 PCH
- SATA7~8 ports support RAID 0/1 mode by Marvell SE9128

Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
when i use i pad with apple tv for see my photo,youtube and movies all ok.

I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

Set up problems with my new I pad

I am trying to set up my new I pad. It asked which network to join but it will not accept the password I put in.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

My new I pad air has a problem - it froze during a face time call and now it reboots and turns dark grey - Siri says 'connect to Internet' but blank screen so can't - help !

The brand new I pad air has just a grey screen and Siri says "connect to internet" but obviously no graphics to enable to do this

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad. Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
Thanks.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.

My daughter has put a four digit code into my new i pad!! i havnt set it up with my laptop so when i tried to sync it i get a msg to enter my four digit code to sync the i pad? which i dont have!!

can anyone help me? my daughter has set up a four digit security code to access my new i pad.(with out my knowledge)
I havnt set the i pad up to my lap top so when i went in to sync it so i could restore its settings it wouldnt let me unless i put the four digit code in,which my 8 year old daughter has forgot....

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

I have the new i-pad and cannot get signal at work. My original i-pad did not have this problem

I have the new i-pad and cannot get a signal at work. My original i-pad did not have this problem. Any clue?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

New i pad set up problem to connect wi-fi

Similar Messages

Maybe you are looking for