New i-pod with old playlist

I bought a new i-pod and want to download from my existing playlist - I named the new i-pod a different name than the old - can I still load my music?

Each iPod gets its own sync settings. Plug in new iPod, give it a name then sync with library.

Similar Messages

  • Problems with old playlists

    Hi,
    I have some problems with an old playlist. I changed my laptop from a MacBook (white) into a MacBook Pro. In the MacBook, I did in the past some playlists, but now I want to re-use them. How can I transfer them from the old mac to the new one?
    And another thing, If I have to choose other songs and they are of differents volumes and they sounds too much or at the contrary they don't sounds... how can I setup the level of the music??
    Thank you so much for the help

    There seems to be a problem with smart play lists.
    Unchecking 'Live Update' on the properties of a smart playlist seems to fix the problem momentarily, but the playlist is not updated anymore when you add files to iTunes.
    Hope this bug will be fixed soon.

  • LabVIEW2009: How to replace new Icon Editor with old one?

    Colleagues,
    I really don't like the new icon editor introduced in LabVIEW 2009:
    That was nice attempt to make "embedded Photoshop" with lot of features:
    But I really don't like it, because:
    - it opened EVERY TIME on the RIGHT monitor (I have three monitors, and primary monitor in the middle) 
    - it takes lot of time for launch (old icon editor was started momentally)
    - from usability point of view - it was wrong to place tools on the right side. Commonly they located on the left side (and only in old icon editor, but also in imageprocessing software like Adobe Photoshop). Also front panel UI design... hmmm... this can be better...
    - some bugs or changed functionality (for example - select ROI, then press <Del> button - nothing happened)
    etc...
    Is it possible to replace it with old one:
    Ideal solution will be - simple switch between both editors (some introduced features are not so bad).
    Thanks in advance, 
    Andrey.
    Message Edited by Andrey Dmitriev on 01-29-2010 11:00 AM
    Solved!
    Go to Solution.

    Go into <LabVIEW>\Resource\Plugins and rename lv_icon.vi. This is the plugin that's called when you invoke the icon editor, and if it's not there, LV reverts to the built-in editor (at least today. I'm not sure how many versions ahead they will keep the code).
    You should note that the editor is open source, so you can go in and change what you want (or save yourself time and use the changes others have made, such as PJM's thread here. You may also want to look at the other discussions in that group).
    Try to take over the world!

  • Can't you add new songs to an old playlist in iTunes and update your iPod?

    I made a playlist a few days ago and yesterday wanted to add about 10 songs to it. I dragged the new songs into the playlist and they all appear in iTunes. I then updated my iPod and headed off to work. However, once I got to work I noticed that the playlist was still the same and the new songs were not on it. Shouldn't they have been?

    Are you using automated iPod sync or manual? If you dragged the original playlist to the iPod (manual), then you have to manually update the iPod contents with the new entries.
    An auto sync method should automatically load the new entries from the iTunes playlist to the iPod. Did you change the name of the playlist? Check the iPod Options area to verify your sync settings (right-click on the iPod in the iTunes Source list on the left).

  • "Combine" New Apple ID with old one?

    As a fan of Apple and their products i'd thought, that i have to sign up on the Apple Support Communities, so yeah, i did it and .. "here i 'am". As i am German, i have to say sorry, if i use bad English. Complaints please to my former English teacher ^^
    Just let me say at this moment "A Big Hello" to you!
    My first discussion is thought to be a question: Can i "combine" my new Apple ID with my old one?
    > Till recently, the Apple ID i used was the one of my dad (so his eMail-adress of course). Now i've created my own Apple ID with my own eMail-adress. It would be great, if i could "transfer" the purchases, i've done with the former Apple ID (my dad's one) to my Apple ID. So, i'd have a better survey over all my purchases too, because i don't have to think "What apps have i bought with the Apple ID of my dad, which one's with my own Apple ID" and so on..
    Is there a chance to do this?
    Oh, and while i talk about "combine": is is possible, to combine "Purchases" and "Purchases with iPhone" in iTunes? I mean, that ALL purchases (the ones i've done via iPhone too) are listed under "Purchases" and the "Purchases with iPhone" could be shown off?

    Haha! Thanks.
    Aw, really? I was actually thinking about your discussion question because I was wanting to merge my new iCloud account into my same old iTunes account so I wouldn't have to deal with two separate ones...
    Excellent! That'd be very great! Let's hope that comes through. I'll be keeping my eye out for that one.
    Haha! Is that true? I feel stupid because I speak English. Since I don't know any other languages fully... So I feel like anyone could understand me if I were in a different country without challenge. Which is good if I want to get my point across, but I just feel like it'd be nice to speak the natural language, ya know?

  • CAN"T EXTEND RANGE OF NEW AIRPORT EXTREME WITH OLD AIRPORT EXPRESS

    Hello Everyone,
    I am having a heck of a time getting my new network setup with this new 802.11n Airport Extreme... Here is what I currently have going on:
    I have a G5 1.8 it is my main computer and in ROOM #1... Connected to it is my NEW AIRPORT EXTREME via an Ethernet cable to one of the available ports. Also connected to the NEW AIRPORT EXTREME is my CABLE MODEM... This works great, It is setup and I have internet via Ethernet... I CAN EVEN CONNECT IN ROOM #2 with a PC and an Apacer wireless adapter...
    Here is the problem
    When I try to add an Airport Express V6.3 to extended the range of my network it can NEVER seem to connect to the network. I have checked the option to allow extension of the NEW AIRPORT in AIRPORT UTILITY and tried both with WEP security and with NO SECURITY... I cannot get the Express to extend the range of my network period... It has an error when joining the network???
    Can Anyone Please Help Me?
    PS. The reason to extend the network is so I can use the Notebooks in ROOM #3 and so a TIVO can see the Network! It is not far away!
    G5 1.8 (2003)   Mac OS X (10.4.8)  

    Also am having problems with my roomates HP Laptop... It connects for only a few seconds/minutes then has an issue... Really shady??? Any Ideas? He is Running Windows XP
    G5 1.8 (2003) Mac OS X (10.4.8)

  • New macbook and getting old playlists to show up

    I have 2 external HD's with music in itunes folders one is a small 150 GB and the other a 650 GB. The largest external is my old computer (now in an external firewire case) with OS 10.5 and itunes and all my good playlists which had some songs linked on the 2nd 150GB external. When I boot from the 650 gb on my macbook i see the playlists but now with some missing audio when I boot my new MacBook from 650GB external while the 150GB is attached via USB.
    So now my question, after buying a couple of utilities which do not merge everything to the one large external, how do i get all the songs and the 650GB playlist from my old HD to show up on the booted macbook and not when I' m boot from the 650GB external. I have on both external HD approximately 200 gb of music, audiobooks and audio class course material.
    I need the playlist (at least) from the 650GB external and then all the itunes backed up on that external. I really don't need to access the stuff everytime i boot up or attach ipod. But i would like the playlists to be there so when i do decide to update the playlist on my iPod 80 gb i can and just so i don't worry. LOL.
    any help GREATLY appreciated.
    tia,
    kc
    [email protected]

    I have the exact same problem.
    The first time i turned the machine on, I got part way through setup assistant and it froze. I turned it off (by holding the power key down). The next time, I got only slightly into setup assistant, and it froze again. The third time, all i get is the crazy picture of how to replace batteries in a wireless mouse. I've tried to restart from the CD and with a variety of restart options. All I get is the battery replacement diagram. Any help out there? Extremely frustrated!

  • New Airport Extreme with old Time Capsule?

    I just bought a new 802.11ac Airport Extreme to increase the speed and range of my home network.  My network currently runs on an 802.11g Time Capsule.  I would like to continue to back up to the old Time Capsule.  Should I just set up the old Time Capsule with wireless off in bridge mode or should I place the Time Capsule somewhere else in the house strategically, leaving wireless on, to improve range?  Someone told me adding a G-speed access point or client to the network would slow things down. 
    Thank you SO much for the help; I'm sort of a wireless networking dummie. 
    Steve

    My network currently runs on an 802.11g Time Capsule.
    I assume you meant to say 802.11n Time Capsule. There are no 802.11g models.
    I would like to continue to back up to the old Time Capsule.  Should I just set up the old Time Capsule with wireless off in bridge mode or should I place the Time Capsule somewhere else in the house strategically, leaving wireless on, to improve range?
    You can do either. If you hare happy with the coverage of the 802.11ac AirPort Extreme, then I would recommend that you go with your first idea. I would connect the Time Capsule directly to the new Extreme using an Ethernet cable, disable its wireless and reconfigure it as a bridge.

  • Cant charge new i touch with old wall charger

    I bought an i-touch recently because I was going on vacation. In the purchasing store they were ,out, of chargers (wall charger) Went to another store and learned they were on recall, not in prior to my departure. Was assured by employees at both stores Corte Madera and Emeryville that the i-pod charger would work. So now am in Japan and i-pod charger does not work (is not supported) and so for the remainder of my trip my I-touch is useless, which is of course v. frustrating! Any suggestions?

    Yes, they changed the charging circuits to only work with the new Apple charger, sorry.
    See if you can find a PC anywhere to charge it, maybe.
    Hope this helps.

  • Synchronisation - new Mac Pro with old iPhone

    I have recently bought an Macbook Pro and want to sychronise it on iTunes with my Iphone (3GS) and my Ipad 2.  However, it only seems to be giving me an option that would wipe the existing contents of my iPhone.  How do I do this?

    Copy everything from your old computer to your new one.

  • New itunes installation with old itouch - cant sync without deleting - HELP

    hey guys...
    after a recent virus went through my pc, a friend had to delete heaps of programs and itunes was one of them. unfortunately he didnt back up my music, and now i have just re-downloaded the new version of itunes and my 2000 songs have gone!
    they are all still on my itouch - but i cant even play them now through my pc - is there anything i can do??
    thanks!

    If your iPod is set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
    If at any point you get a message that your iPod is linked to another library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    Once you are safely connected, if you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to the iPod and iPhone. However there are a few third party utilities that are advertised as iPhone and iPod Touch compatible which can be used to retrieve the music files and playlists etc. Have a look at the web sites and help pages for these ones and see what you think or check the web for reviews:
    SharePod Windows Only (iPhone and iPod Touch compatible)
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

  • New Macbook Pro with old Macbook HD

    Is it possible to upgrade to a new macbook pro and use the old HD from my current macbook. I would like to get the performance upgrade without having to reload all my programs and other things. It will also make it easier to put the new HD from the new macbook pro into the old mb and have it as new without my info inside and have all the latest software installed and clean. Also , what is the max amount of memory on a 15" mbp.

    The OS version being the same is irrelevant - the hardware is different. One example - your new MBP has dual graphics cards. The 'old' OS won't support that, because the hardware wasn't present on the old machine, so necessary components (call them drivers if you like) weren't installed.
    To be blunt, if you swap the drives or clone over the old system, you will have problems. You can do that with _the exact same model_ but not an older one.

  • Imovie11 substituting new movie files with old files?

    Hi Bought new imac in dec 2010 with iMovie 9 and used to import movie files from Panasonic SD60 - no problem. Upgraded to iMovie 11 this week and now, imported files are being substituted for old files - the import thumbnails show correct file, but preview pic above is showing different images. Even stranger, it seems that iMovie is reading files which were never imported onto the new mac and have been deleted from SD card? Anybody got any suggestions?

    Update:
    I notice that in "Manage Sites", if I choose a new "Site", then I get all the nice friendly Advanced options (including whether or not to cache) that the first article described.  However, if I choose "FTP or RDS Server" (which all of my connections are), then I do not.  What I do get instead is a nice friendly pop-up informing me that "Server connections allow you to work directly on the server..." etc etc.  Why then if we're working "directly on the server" are we still getting issues with multiple instances of a single file existing?  One of the most common annoyances I'm running into is that I can open a file (which of course also opens dependent files), and then immediately go to save that file and receive a warning that the copy of one of the dependent files on the server has changed since my last 'get' operation, and that saving may blah blah blah.  Nevermind I JUST opened the file, directly after opening DW and Refreshing my FTP connection (and no one else is working on the site).  We've also seen where files and folders with a same name but different case will appear in the structure, which REALLY gives us some buggy grief.  If I have the file "css/mystyle1.css" on the server, but I open a file that links to "CSS/myStyle1.ss", it'll create that folder and file parallel to the actual folder and file, and any subsequent changes to the REAL file cannot be saved due to "a file already exists with that name" issue.  The obvious fix is to go through all my files and make sure my case structure is universal, but this bugginess is just absolute madness, and the synchronization thing today cost us some MAJOR changes to a file that has not been touched in over a week.

  • New COPA datasource with old append extractstructure

    Hi Experts,
    my problem is to add a new field to a COPA data source with KEB0.
    I know that I have to delete the data source and install a new one, but I cannot as-sign it to the old extract structure. And if it is not possible, I need to define new DTP and Transformations in my BI system, because of new replicate (PSA).
    I hope someone has an idea.
    Thank you in advance!
    Best regards
    Florian

    hi,
    if u have a new field for u r excisting datsource ....right
    it is not a issue to delete the datasource simply activate the datasource and replicate in BI/BW  and change the transformation and simply activate the DTP and schedule DTP
    Regards,
    Lakshmi

  • Adapter - New lightning dock with old iphone

    Hi all
    I have new speakers with an iPhone 5 dock / lightning adapter.
    I'd like to use my old iPhone 4 or iPod 3 to play music on this device.
    I can see plenty of adapters out there that transfer from the old connector to the lightning connector, but are there any adapters out there that transfer from the new lightning connector to the old?
    Thanks

    Copy everything from your old computer to your new one.

Maybe you are looking for