New iMac 27" port forwarding

I just changed my 24" iMac (mid 2007) wit a new 27". I always used to connect with amule getting a high id, even after installing Lion.
With the new computer my id is always low. Of course I made the same settings as before. I didn't change my Router (Linksys WAG320n).
- Is there a hardware difference that could prevent freeing the ports?
A different procedure, may be?

I add further details to the above message
I tried this: http://www.amule.org/testport.php
I input the port choosen in amule preferences, but I got this message:
Error: TCP port 8662 is unavailable. Make sure your firewall or router is allowing/forwarding this TCP service port and your ED2K client is running (i.e. aMule, eMule).
Detailed Error Message
TCP Error 110 Connection refused
Explanation
The connection timed out, meaning the port is being blocked or incorrectly forwarded by a firewall or your computer is turned off

Similar Messages

Is the new iMac a step forward for video editing?

Hi,
Do the changes in the new iMacs make them better video editing machines?
Thanks

Faster system, more RAM (which can be added to the previous model) and new graphics system (which won't affect graphics editing much if at all). That's basically what I see. Since I have no complaints about video editing with my year old iMac I'm not rushing out to buy.

Help for my new E2500 router port forwarding

My home web hosting used to work. But because of changing ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own Linksys E2500 router. Both Verizon and TWC services I subscribed are Dynamic IP. I use a third party to redirect the web traffic to my home.
TWC gave me a simple modem-router in a box. Input is coax and outputs are 4 ethernet ports. I use one of the 4 ethernet outputs of the TWC box to connect to the internet ethernet input port of the E2500. All my wire and wireless devices are now feeding off the E2500. All wireless and wired devices work and can browse internet through the E2500.
I have assigned one computer as the web server and set the internal IP addess of this computer as 192.168.1.128. This is the same for the setup with Verizon before.
I loaded the CD came with the E2500 router and can see the LAN 192.168.1.128.
My problem starts from here, I do not know how to set the port in E2500 to make the web traffic to 192.168.1.128
1. Using the E2500 CD, I click to "APPLICATION AND GAMING", then "SINGLE PORT FORWARDING". under the APPLICATION NAME, I select one of the box to HTTP and type in 128 under "TO IP ADDRESS". I then click ENABLED, then "save settings" . The 192.168.1 is fixed in this window, I can only type 128.
This does not work. I can browse internet but cannot access my website from any machines using domain name.
Then I tried:
2. with item 1 above, I continued to do SETUP>>BASIC SETUP>>DHCP RESEVERSATION. I can see the compute/sever name and the 192.168.1.128. I then click the "select" and save the client.
I restarted the computer/server, I unplug and plug the E2500 power. I check the server internal IP address and it is still the same. But I just cannot browse to my website. I can browse other places.
Any idea of what is wrong on my doing? Please help.
Solved!
Go to Solution.

Your modem is a router. Any incoming internet requests end at the modem/router. You have to configure port forwarding on the modem/router first before the E2500 will see anything incoming from the internet.
Alternatives:
1. Set the modem/router into "bridge" mode which turns it into a simple modem. Then you can connect directly to the internet with your E2500.
2. Set up the E2500 as simple access point and keep the modem/router as your main and only router. Then all forwarding is done on the modem/router.

Can iPod Classic work with new iMac USB3 port?

I want to purchase a new iMac20 as my six years old one is starting 'to go', but wonder if my Classic will work with the USB 3 ports.

Hi there philipfromjennings,
The short answer is "it should." Take a look at the article below for more information.
Using USB 3 devices on Mac computers FAQ
http://support.apple.com/kb/ht5172
What happens if I plug my USB 3 device into a USB 2 port?
Your device should be backwards-compatible with USB 2 ports. However, you won't get USB 3 speed and power may be limited to 500mA.
-Griff W.

How to connect old LED Cinema Display to new iMac

How to connect old LED Cinema Display (Mini DisplayPort)
to new iMac (thunderbolt port)?
Ideas?

Just plug it into the Thunderbolt port. That port directly supports mini-DisplayPort screens.
http://www.apple.com/thunderbolt/
Regards.

New iMac-Questions for musicians/computer experts

Friends,
My primary reason for buying a new iMac has to do with home music recordings. (Especially w GarageBand, but other music programs as well.)
Spent the day trying to get things going with my brand new iMac. (Specs below).
Things went pretty well, except when I got to peripherals. So, for some of you musicians out there who might have encountered similar situations when upgrading computers/operating systems:
1) *Presonus Firebox* preamp. On my old iMac, all I would do was plug in the firewire to the computer and the preamp turned on. (Usually left the firewire plug into the preamp all the time.) Never used the AC adaptor. Apparently wasn't necessary. The cable was a 6-pin to 6-pin. (Meaning, I think, 400 to 400.)
a) Tried to get the preamp going on the "new" iMac. Used a new 6-pin, coming out of the PreSonus Firebox, to 9-pin, going into the new iMac firewire port, cable. Nothing happened. Firebox didn't turn on.
b) Thoughts? Why didn't it work? Do I need to go to the PreSonus Firebox web-page to download an updated driver that will work with +Snow Leopard+? (Been to that site and it said +Mac users do not need to do this+.)
c) This is critical for me. I don't want to by a new preamp to do my recordings.
2) *Yamaha DGX-305* keyboard/synthesizer. I've used this for many recording purposes...sole piano work, comping, effects, etc... bringing it in as either MIDI (via USB cable) or analog (headphone out to iMac audio line in). But...
a) when I tried to bring it into my new iMac (same way: USB cable for MIDI), nothing happened. Tried to record....settings were all the same as on the old Mac (i.e. to a MIDI track in GB, line in/out were correct after setting them on the computer)....pushed "record" button, played, marker/track moved, but nothing was recorded.
b) It would seem that I would have to go to the Yamaha web site to download the latest driver to make this work.
Following a visit to the HP site and a phone call, was told that HP stopped making the printer I have (about six years old) and, therefore, do not make drivers compatible with +Snow Leopard+. So, today, I purchased a brand new printer. Certainly did not think I would have to do that after buying a new computer. And wasn't particularly happy about it. Present printer works just fine.
I will be visiting the websites and calling +PreSonus Firebox+ and Yamaha tomorrow morning to inquire about workable updated drivers for +Snow Leopard+. My great fear is that either or both will say the same thing as HP: "Stopped making those models and do not have downloadable drivers" for my new computer/operating system.
If that would be the case, it would mean that the "critical" peripherals for my home music recordings would be obsolete. Effectively negating the usefulness of my brand new iMac.
*THE MAIN CONCERN:*
*I do not want to buy a new preamp, keyboard, or whatever to enable me to resume my recording efforts. I didn't sign up for that when I bought my new iMac.*
Anxiously awaiting your thoughts.
The only reason I bought a new iMac (the old one...which I will still keep, works perfectly fine, just pushed to capacity) was to make my home recording efforts easier. Meaning, less stress on the processor, more space available on the computer itself for those huge music files, and more speed with much more RAM.
But it never occurred to me that buying a new computer would require buying everything else to go with it: printer, preamp, keyboard, etc.
And, just a quick p.s. regarding GB: on the old version I have, GB2, when you double-clicked the "instrument" icon at the very left of the track, it brought up a window where you could adjust things, change instrument sound/audio font, turn monitor on/off etc. However, when I double-clicked the instrument icon on the new GB, nothing happened. It would seem this is a typical problem with updated programs. Nothing, or at least not enough, is where it used to be. A real problem for an old guy like me to re-learn everything. I'm sure I'll have to do a lot more exploring to find out how this new GarageBand works.
Thanks for any comments/suggestions. (If it weren't for the invaluable resource of Apple Discussion Forums, I wouldn't even have considered buying a new computer. At least I know you guys are here.)

• Firebox: There is a problem with the Firewire card in newer Macs - I have the same problem. It will not sync up with some interfaces (I have the Inspire) when they have no external power source. There's only two solutions: use the power adaptor, or chain it with an externally powered hard drive. After everything is up and running, it should be okay to unplug the power adaptor.
• Keyboard: The device that your computer is connected to is not the keyboard but the midi interface (which you call "cable"). You can plug any midi instrument into that, the Mac doesn't care. So you'll have to update your interface's driver, but you don't tell us what it is. If it's a yamaha intereface:
http://www.global.yamaha.com/download/usb_midi/
(And a note: Lengthy posts like yours, with a lot of talk about why you bought your computer etc., don't attract a lot of people to give you answers. A short but concise description of your problem - like what interface you are using - is a lot more helpful.)

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

New imac doesn't locate old imac hard drive via usb port

I have an old iMac from ~2006 that recently stopped reading the harddrive. I pulled the HD out and connected it to my new imac via USB port but I can't locate it. The HD spins/powers up so I know the connector is strong enough to supply power. We connected it to my husband's PC and he can see that there is a harddrive but cannot see any files to read. He even tried Catacombe to try to read files but it didn't work. My first issue is how can I locate my HD on the new mac? But the main issue is how can I pull data/pictures off of the old harddrive and import them to my new computer. I don't hear any clicking sounds from the harddrive so it seems to be working. I can't reformat it because I don't want to lose the pictures on it. I don't need the old harddrive to work/write. I just need to pull the information off of it. TIA.

I was not familiar with catacombae , but now I am .
You have a problem with either a corrupt file system on the hd or a hardware problem with the hd. I'd say try mounting in disk utility. Try reparing filesystem on hd. Try one of the disk repair utilities. Some have a free trail that let's you know if they can do anything. You pay to get the data. Seek profession help. Pay $$$.
How to mount with disk utility.
Repair the file system. see repair disk button on lower right.
here are some more data recovery apps. I left out a few & am posting my complete list.
Perhaps Disk Warrior will be of some help:
http://www.alsoft.com/DiskWarrior/
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
"Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
http://www.prosofteng.com/products/data_rescue.php
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
-- been accidentally deleted.
-- become unreadable due to media faults.
-- been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
"TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
http://en.wikipedia.org/wiki/TestDisk
Wondershare Data Recovery for Mac
"Recover lost photos, video, documents, email and archive files from any Mac-based hard drive or external hard drive, iPod, USB drive, SD card, digital camera, mobile phone, and MP3/MP4 player, due to accidental deleting, formatting, virus infection, improper operation, unexpected power failure, and other unknown reasons. Also, iPhone recovery allows you to recover lost photos, videos, SMS, contacts, note, calendar and call history from iTunes backup file. With the free trial, you can preview all your recovered images, videos, music, documents and archive files prior purchasing this Mac Data Recovery."
http://software.bigbigsoft.com/data-recovery-mac

How to transfer files from an iMac without upgraded Migration Assistant to a new iMac that doesn't have a firewire port?

Hello.
I just purchased a new iMac. He's awesome. However, he didn't come with a Firewire port. (Bummer, because I have one from the last time (2007) I had to transfer stuff from my iBook...)
When I turned him on, he wanted to use Migration Assistant to transfer files from the older iMac; she doesn't have the most updated Migration Assistant, though. (She works just fine, but she only has Snow Leopard.)
Okay, so what I'm wondering is if I just have to use a huge external hardrive to move everything? If I do that, will my programs (Microsoft Office) move? I fear they won't move/transfer that way. Ugh.
PLEASE HELP.
Ideas? Advice?
Thank you in advance!

Firewire 800 (what the new iMac has) is 9 pin. FireWire 400 is 6 pin (what your old iMac has). Hopefully you didn't damage your new iMac by trying to insert a FW400 cable into its FW800 connector. The numbers are important in the case of the ports. They don't interchange!!! Get the proper cable or risk damaging your new iMac.

Where is the output mini display port in the new imac 21,5 ?

Hello all,
I have buyed a new imac 21,5. In the apple web store says that the imac have a output for mini display port but I can't find it.
I need to connect an other screen in my imac.
Who can help me in this question ?
Thank you very much in advance.
Xavier

Dear John,
thank you very much for your quickly answer.
But now, please, could you say me which is the exactly adapter that I need for to can connect a VGA monitor with the Thunderbolt port ?
There are many models but any specify about the Thunderbolt connection.
Kind regards,
Xavier

How can a video editor use an NTSC studio monitor on the new iMac without a Firewire 400 port?

Looking at the new iMacs (hungrily) and wondering how I will be able to continue using my Sony DSR-11 and NTSC monitor in the absence of any Firewire 400 port. I suppose there may be cables that will allow me to use the Firewire 800 port and am thinking they may be difficult to locate.

No they're not - they're available from many sources; i.e. I bought a FW 400 > 800 cable when I bought my iMac last August (at an authorized local reseller). Just google Firewire 400 > 800 and you'll get plenty of results. You can also opt for an adapter if you prefer. Both are also available at the Apple store online.

Connecting a Canon HV30 camcorder vai a thunderbolt port to a new imac

Hi all
I was using imovie 11 with my old imac (purchased Summer 2008) using the firewire connection to transfer DV/HDV video from my Canon HV30 camcorder (tape). I just bought a new 27 inch imac with the thunderbolt ports and now I am stuck as there is no firewire
The camcorder had a 4 pin firewire output so I have tried the following
Used the original camcorder cable (Firewire 400), converted to firewire 800 with an adapter and then used the Apple firewire to thunderbolt adapter
Used a cable that converted the 4 pin firewire to firewire 800 and then used the Apple firewire to thunderbolt adapter.
In each case, imovie is not seeing the camcorder.
I know that my camcorder is not listed as being supported by imovie but has worked fawlessly on my old machine running the same software and operation system (Mountain Lion)
Any ideas - thanks
Kevin

Hi epjustin,
What I said in the previous post (Oct 9 2013) works for me but I can try to explain in more detail if that helps.
Firstly. remove the battery or the ac power connection from the camcorder. - VERY IMPORTANT
Turn on the Imac and login
Attach a thunderbolt to firewire 800 adapter to the IMac thunderbolt port - you can get this from the Apple Store
Now attach a firewire 800 to firewire 400 adapter to the the end of the previous adapter. You should now have the appropriate firewire 400 connection so that you can attach the original firewire cable that came with the camcorder.
Now connect the camcorder cable to complete the connection between the camcorder and the computer
Now connect the power supply or the battery to the camcorder and turn on the camcorder. Set the camcorder up so that it exports through the cable as normal
You should now be able to detect the camcorder in imovie. If you can't see the camcorder in imovie, go into system report from about this mac and you should see an entry in the thunderbolt section relating to the connected camera.
As I mentioned above, turn on and disconnect the power from the camcorder before disconnecting the camcorder from the Imac or turning off the Imac
If you can't get things to work, you may want to try connecting the camcorder to another computer as there is a chance that the board is fried if it doesn't work
Please let me know if you need any further help
Kevin

Is anyone else super mad about not having a cd port for the new iMac?

I just bought this new iMac as an upgrade from my old '09 one. I thought this was to have a cd port but it doesn't! I'm super mad because i always used to burn my iMovies onto cds so I could watch them but now I can't. I guess I should've read the box but seriously? If it was good on the old macs they should have it here. I paid the same price for this mac as my old one and I lost one great feature. I need to produce products for people but I can't do that when THERE'S NO FREAKING PLACE TO PUT THE CDS!
Is there any solution?

Doing a search here reveals several threads including this one:
https://discussions.apple.com/message/20853750#20853750
It's been discussed for some time and external burners are available. I've had one for years.

Adding an esata port on new iMac?

Is there a way to add an esata port to the new model iMac?

OWC has offered this in the past, but I don't think it's possible with the new model iMacs, they way the teardown would have to be done.
On the other hand, with Thunderbolt on the new iMacs, why bother with eSATA?

New iMac 27" port forwarding

Similar Messages

Maybe you are looking for