New iMac can't find OSX when firewired to G3 flatscreen iMac with 10.3.9

I just purchased a new iMac with Leopard, and I have an old flatscreen g3 imac running 10.3.9. I started up the new computer, plugged in the firewire cable, held t on th old comp, the symbol popped up, but then the new computer says It can't work w/out osx, and that osx isn't installed on the old mac, even though it is... I need to firewire sync.. how?

No no... I fixed it now. I was trying to get the old data from the old comp to the new one... It worked on the fifth try.

Similar Messages

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates.

I can't find folder when I make Search with new OS X Mavericks update?

1- I can't find folder when I make Search with new OS X Mavericks update? I have 4 Tr HD when am looking for my file I have to make search but now search can't find files?????
2- alt is not working?

Hello,
I use to do search like this before I update my Mac, how I can do it now?

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

Wacom Intuos Tablet and Pen not working on new iMac with OSX 10.9.4

Hi there, I've been using an A3 Wacom Intuos tablet and pen for many years now on a 2006 iMac for my illustration work, but I cannot get them to appear or work on my new iMac with OSX 10.9.4. I think they are the original Wacom Intuos tablet and pen. Does anyone know if they are just out of date now and aren't supported on the new OSX 10.9.4? Any advice would be greatly appreciated as I need to work and it's frustrating!
Many thanks,
Steve

Barbara B.
I have done as you suggested; I uninstalled PSE 11 and set my wife's account up as admin and reinstalled from there. Still have the same problem with my wife's account, but when I went to mine it is working correctly. Any ideas on why that would be? I'm sure it should work on both accounts. I have 2 accounts on my Mac Mini running OS X 10.6 Snow Leopard and it works on both.
Thanks for your help; at least it's working on my account so that's a great improvement.

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

Glenfern wrote:
The reason I'm considering partitioning is - I'm going to transfer about 50 GB of family photos & music to the iMac. Over time the photos & music library is going to grow. My idea was to point the iphoto & itunes library to the new partition so that the application programs (that will will reside in partition 1), will not get congested with photos & music over time & degrade performance. Also, I dabble a little bit with the music editing program LOGIC & Sound Track Pro, which creates lots of little music files in the process.
In your case I would strongly recommend against partitioning, as dwb mentions a drive loaded with data on an
O SX system doesn't equate to performance loss. However partitioning does. If you were going to tell me you were partitioning to load different OS's on the computer then you would have a good reason to think about partitioning. My suggestion is do not partition.
What I would also recommend is getting some high quality high speed external HD's to store your photo and music libraries on. This helps keept the 2GB drive available while maintaining performance. I have 3 external HD's attached to my iMac, two are backup drives (1 Time Machine & 1 Bootable Clone) the third drive is for storing my my music, photo & movie libraries on. If you go this route the 3 drives I'd recommend are:
http://g-technology.com/products/g-drive.cfm
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
http://www.lacie.com/us/products/product.htm?id=10330
Personally I use the Lacie's however OWC or G-Tech would also be welcome on my desk.
Again if you want to take this path Apple has instructions for how to move the libraries to EHDs, if you want those links let me know.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Have new iMac with iPhoto sharing turned on. When the shared library is clicked the library disappears or starts to load then disappears? What is wrong?

Have new iMac with iPhoto sharing turned on. When the shared library is clicked the library disappears or starts to load then disappears? What is wrong?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then your current library is damaged and needs repair.
Therefore make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If you experience the same problem with the test library then try this basic fix a try: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the source it came on originally.
OT

I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

How do you print in greyscale I can't find option when in print preview?

How do you print in greyscale from iMac desktop, I can't find greyscale when in options for print preview?

Please again in the print preview, the drivers are supplied by the printer mfg to Apple, if your printer offers that feature you may need to dig a bit for it.

Where can I buy a new iMac with Snow Leopard on it?

Hi Folks,
If I go to the Apple Online Store I can only purchase imacs with Lion on it. My software does not run on Lion. Where can I purchase a brand new iMac with Snow Leopard on it?

It is a little late in the game to find one at Apple, much less one from an Apple Reseller like Fry's or Best Buy. For example, late last year I found a new 2010 Mac Mini that was still on Snow Leopard at the Sacramento Fry's, but it was there last one.
Actually your best bet at this point in time, is to buy used from a private party or "yuck" reconditioned from a second hand reseller.
see > The Mac Store - Pre-Owned / Used Macs - Used MacBooks, Mac Pros & More
or > Used Macs & Apple Computers - MacBook Pros, iMacs & Cheap Macs - All Tax Free | PowerMax
and/or > Used Macs, Refurbished Macs, Buy and Sell - Mac of All Trades

How can I use Aperture 3 on my new iMac with Maverick?

How can I use Aperture 3 on my new iMac with Maverick?

Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie

New iMac can't find OSX when firewired to G3 flatscreen iMac with 10.3.9

Similar Messages

Maybe you are looking for