New Imac generates thumbnails that I can't see on my powermac running OS 10.4.11

Images created on my new Imac OS 10.8.2 can be copied accross to my Powermac G5 OS 10.4.11 but the thumbnail is missing. Is there a setting that I need to unlock to allow the older mac to see these thumbnails?

I have now connected the iPhone directly to a USB port on the bottom of the Cube. According to the System Profiler the Cube is seeing the iPhone, but the iPhone does not show up in iTunes.

Similar Messages

  • I hear a lot of disk I/O from my iMac 1TB drive.  How can I see apps may be running in background?  Time Machine is not running.

    I hear a lot of disk I/O from my iMac 1TB drive.  How can I see apps may be running in background?  Time Machine is not running.

    If you wnat to see the applications that are running, open the Activity Monitor application (it's in /Applications/Utilities). After opening it, select "All Processes" above "Show" in the toolbar, and you will see all the processes that are running.
    I/O errors often happen on a damaged hard drive. If you are receiving that error, you should make a backup with Time Machine or Carbon Copy Cloner as soon as possible and take your Mac to an Apple Store or reseller to get another hard disk.
    If the warranty is void, you can try installing it yourself, but note that there are some iMacs which are very difficult to have the hard drive replaced. Search the steps in iFixit > http://www.ifixit.com

  • I have a brand new iMac (late 2012) that keeps losing its internet connection

    I have a brand new iMac (late 2012) that keeps losing its internet connection - like every five minutes. I have had it for three weeks. During the first two weeks, it worked flawlessly. However, just as the refund period ended - it became desktop dead weight. Suggestions?

    did u ever get a solution to this?  I have the same 2012 mines 27". It drops after sleep sometimes and can't find anything. Wifi. Connection to the Internet. I pull up network assistant it just gives me blank stares and restart everything. It doesn't even see the time machines and they are still there. I have it right now in full error and my iphones allowing me to see everything as connected and I'm posting here in the forum while my iMac cannot. Doesn't happen all the time. Not sure why it happens or what's goinng on with It. Works great and then sudden wifi failure to recognize.

  • When syncing iPod to new iMac will playlists that are on iPod get transferred to iTunes on new iMac or will i loose those playlists already on iPod.

    when syncing ipod to new imac will playlists that are on ipod get transferred to itunes on new imac or will they be lost?

    This thread may help you:
    https://discussions.apple.com/thread/2577582?start=0&tstart=0

  • I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

    I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
    Help!
    Thanks

    Deleting an iCloud account only deletes it from the Device, not from iCloud.  In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens.  Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device.  It will redownload to the device should you sign back into the account.
    The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days.  When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question.  However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days.  When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload).  Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this.  If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

  • IMac G4 - Black screen (but can faintly see)

    I am having problems with my iMac screen. The computer works fine, it's just that you can barely see anything on the display. You need to take a light to it to see what you are doing. I looked everywhere online for something like this, and what I keep finding is "turn up your brightness..." The brightness is at full. I called an Apple retailer and he said that it might be a loose connection or that my backlight is burnt out. I would love it if someone who has had this issue please help me!! Tell me what you ended up doing.
    Thanks.
    iMac G4   Mac OS X (10.4.7)  
    iMac G4   Mac OS X (10.4.7)  

    You could try resetting the PRAM
    http://docs.info.apple.com/article.html?artnum=2238
    but since your iMac has an LCD display, the backlight is probably not working. By the way, this is the forum for iMac (G3) with the CRT (tube) display, so better expertise will be found in the forum for "iMac (Flat Panel)."

  • Updated to Mavericks and I get the upper left quarter of the screen blacked out on Time Machine. This means that I can't see the files. Any suggestions for getting rid of the black square?

    Ive tried disconnecting and reconnecting the Time Machine. And I've tried rebooting the iMac, but I still get the top left hand quarted of the screeen blacked out. I can scroll back through the back-ups but the back square means that I can't see the details of any file.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My thumbnails have all disappeared.  If I view events there is the same one for all 270 events and if I open an event I have clack thumbnails. I can only see the photo if I open it individually.

    If I view events there is the same thumbnail for all 270 events and if I open an event I have black thumbnails. I can only see the photo if I open it individually.The only way I can then see the thumbnail is by editing each photo. Then to even further complicate matters the last editted phot is replaces as the thumbnail on all events foders!...grrr. This is what I awoke to two mornings ago after inly backing up my machine which I do every night.

    No.  Quitefrankly I didn't know I could even use iPhoto on iPad, I just have the photos app that came on it.  This is on my laptop.  I don't particularly like iPhoto I use it essentially to take photos off my camera and store all the originals.  I use Photoshop. To work on them and store them in Dropbox (don't get me started on iCloud!). As I said this is a problem that seemed to crop up overnight after backing up to my external HD. 

  • I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

    I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

    Red21Gerard wrote:
    I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
    FaceTime:
    Check Settings>FaceTime>ON and check Settings>General>Restrictions>FaceTime>ON.  There is no icon, on the 4 & 4S FaceTime is accessed through contacts.  Go into your Contacts, access the contact you want to FaceTime with and you will see a tab at the bottom of their contact card.  You can also access FaceTime by going into your Phone app, select dialling keypad, dial number, press call and an option for FaceTime on the keypad will appear.   It should be noted that FaceTime has been removed from iPhones sold in some Middle Eastern countries at the express wish of the respective Governments.
    iMessage:
    Check Settings>Messages>iMessage>ON.  The icon is the same as your SMS icon. This support document will explain how to use iMessage http://support.apple.com/kb/HT3529

  • HT4559 i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting notification

    i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting>notification
    how can i work with the facetime app??? plz reply me

    FaceTime is not available in KSA or UAE.
    See this -> http://support.apple.com/kb/HT1937

  • I have a new iMac with OSX 10.9.3 on it, will Illustrator CS6 run on it ok

    I have a new iMac with OSX 10.9.3 on it, will Illustrator CS6 run on it ok

    72point,
    It will, see system requirements here (10.9.3 is Intel based):
    System requirements | Illustrator

  • The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

    The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

    I have the same problem with new 11.0. Presentation of album data now seems scrambled in 'Album' screen. Instead of albums in alphabetical order with all album tracks I now get albums in the order of the Album Artist. Unless the album artist is EXACTLY the same, the tracks on any one album can be spread all over the screen (hopeless for compilations). Does anbody know how to get the Album screen to sort solely on the Album title?

  • I am new to Photoshop Elements.  How can I see the exif data of my photograph?

    I am new to Photoshop Elements.  How can I see the exif data of a photo?

    I have Elements 10.  Sorry I am really struggling with the programme and I
    don’t see the word Menu anywhere on the editor screen.
    Rev. Dr. Jill Morley
    PO Box 51059
    Musgrave Rd.
    Durban.
    [email protected]
    0837791978 (c)
    0312080473 (h) and (f)

  • I created a new playlist on iTunes but I can't see it on my iPhone?

    I created a new playlist on iTunes but I can't see it on my iPhone?
    This is iPhone 6 latest OS version

    Hi ik-graphics,
    So you synced a new playlist to your iPhone but it isn't available on the phone?
    When you synced the playlist to your iPhone with iTunes, did you have the music set to sync the Entire music library or Selected playlist…?
    3.  Select the Sync checkbox, then select the items you want to sync automatically each time you connect your device.
    If you had it set for Selected playlist, please make sure the new one is selected to sync.
    Take care,
    Nubz

Maybe you are looking for

  • How to use a FILTER in a normal table in ABAP WEB DYNPRO

    Hi Experts, I need to Filter my table in UI using the 'onFilter' event, BUT I want the first row of the table to be my INPUTS  to do the filtering - JUST LIKE IN ALV TABLE, since i dont want to use an ALV table, i want the same to be done in a transp

  • Down payment process for Poland - correction invoice

    Hi, In note 1007635 is a statement: "Apply code changes given in this note to include ZXVVFU08 (being     part of EXIT_SAPLV60B_008), save and activate the project." Does anyone know where I can find this code?

  • Odd SDM Behaviour

    Hi everybody My local AS is 7.0Sp12, customer dev AS is 7.0Sp16 pre release. I used to have two DCs, one for models and one for apps. Everything worked ok locally. Then I tried to deploy the two DCs on customer's AS: what happens is that model DC dep

  • How to run a Java class in JDeveloper - with Input parameters

    Folks, I need to run Forms 10g trace and do not have access to the Dos command line (no Programs-ACcessories-Comand prompt). I am allowed to run Batch files though. So really I need to run class "oracle.forms.diagnostics.Xlate", but need to give Inpu

  • Sticky issue when failed server become active

    Hi, We are operating the ace(csm) and using the sticky option. Assuming that We have two servers with sicky for redundancy and being opreated active - active,  I realized that if one server go down and go up, Csm dosen't forword packet to restored se