New iMac Hard drive age

I'm getting a new iMac 20" with a 250GB hard drive and Leopard on it. One question though, what about the hard drive. Is it known to fail? Or is it a goodin'. This might help me decide if I need to buy a backup HD, just in case.

I want a iMac!! wrote:
Applecare!!!!!!!!!!
I'll buy a backup HD and i'll bet you it will cost less than Applecare overtime
I dont belive in that extended warrenty crap
ROFL when the cost of a new LCD or logic board come your way, let me know how much it costs. For less than 200 bucks I get an extra 3yrs of safety knowing I can get things fixed at no cost to me, I'll take it.
To each his own. Let's put it this way, I bought home warranty for my house (house was already 10yrs old), 5yrs later my wife had same mentality that you just showed, and canceled it. End of that year BOTH our HVACS went out. Not one but BOTH. Now, let's see, less than $800 a year versus almost $10,000 for 2 Hvacs? not including the labor to install them. With home warranty 2 hvacs would have only costed me a grand total of less than $200.
Sorry, most things I don't buy extended warranty on, and some things it's just common sense to get it.

Similar Messages

How do I move files, photo's and itunes to new imac hard drive permanently?

Hi, just bought (on route) new iMac and want to know how to move all files, photos and itunes to it hard drive permanently from my MacBook.
MacBook being given to daughter after so want to transfer everything and then wipe clean. I am ok with computers wbut not the best. I am running a network through my time machine if that helps?
Many thanks

Follow the steps in Setup new Mac.

PSE 8 fails to run on new iMac hard drive following Time Machine backup

I had to have my iMac hard disk replaced last week as part of the Apple replacement programme. Following the installation of the new disk I restored the entire Time Machine backup onto the new disk. Most things work perfectly but I get an error message when I attempt to start up PSE 8. The error is Error 150:30 stating "Licence has stopped working". I have attempted a number of things to correct this as described in http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html, but found that much of the FlexNet data that the article refers to does not exist on my machine, so I am unable to complete the recommended steps (I have made hidden files visible). The Flexnet files also don't appear on the backup volume. When I attempt to reload the software with the original disks I just have the disk drive make a bit of noise and then eject the disk. All other CD/DVD's work as normal. Any ideas very welcome

Download PSE 8 from the trial download site and use your current serial number to activate it:
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.

Can't locate restored files on new iMac Hard Drive

My hard drive failed on my iMac (Intel), Apple Store replaced the hard drive, brought it home, hooked up the Time Machine, selected a backup date, restore... it showed the content loading for 4 hours... once complete, the iMac still looks nothing like the old. Open the Macintosh HD and Info shows that the 230 GB transferred, but I can't find the folders anywhere. When actually opening the Macintosh HD, its only new folders and the new setup. Where do I find the restored content?

Hello, on the Desktop open Macitosh HD,look for the Ysers folder, is another User there?
Can you log into that othe user?

Suggestions for new iMac, hard drive and Thunderbolt vs FW800 vs USB3?

Ordering a new iMac 27" and leaning toward fusion drive, and wondering if anyone has any suggestion or experiance with this drive? Any suggestions for drives would be welcome.
I am going to have to decide what to do as far as storage and I assume USB3 will be the best choice - been using FW800 and lots of new things coming.
Thanks for any input and suggestions.
Don

anybody have any comments on the use of Thunderbolt vs USB3? I am using FW800 not and will be changing my 2 external drives. I have to keep FW800 on them so I am able to daisey-chain them. My use is normal and wondering if I should stay with USB3 & FW800 for external or make the TM drive a Thunderbolt. Those seem to be priced higher just wanted some suggestions, recommendations.
Thanks,
Don

External hard drive that had my itunes on it crashed; had to recover data on new external hard drive; not can't access iTunes from my iMac - how do I name it correctly in order to make iTunes work again

how do I set up a new external hard drive with my recovered iTunes (from a hard drive that crashed & had to be replaced) so that I can access iTunes on my iMac again?

Take a look at this link, http://support.apple.com/kb/ht2519

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

How do I transfer an existing Aperture library to a new external hard drive

I have a new external hard drive where I want to store my pictures to free up room on my iMac
How do I take an existing Aperture library and move it to the external hard drive so that Aperature can find and use it? Once it is moved can I delete the library from my iMac without causing problems with my new hard drive library?
thanks

Hello Barty,
is your library referenced or managed?
If your Aperture Library is managed, then you can simply copy it to your new external drive using the Finder. Make a backup of your old library and convince yourself that the backup is working.
If your library is referenced, then use Aperture to relocate your master image files to the external drive (select all images, then File -> Relocate Master), then copy your Library to the external drive using the Finder.
To point Aperture to the new library location, double click the new Aperture Library to open Aperture with it. Test it thoroughly, before you delete the original library.
You might consider only to relocate the master images to your external drive and to leave the then much smaller Aperure Library on your system drive. That way Aperture will work faster, and you will be able to browse and share your images, even when our external drive is not connected.
Regards
Léonie

Getting my backed-up photos into iPhoto on the new external hard drive

I managed to use Time Machine to restore the back-up of my external hard drive (that died) to a new external hard drive, however, while I can see the .jpeg images that were in my original (ext. hard drive) iPhoto library on the new Passport Drive, they are no longer set up in an iPhoto library. I might have confused the system because I had thought I needed a shell structure iPhoto library on the new hard drive, so I basically moved the new "budding" iPhoto library established on my iMac's internal hard drive to the Passport drive before restoring the Time Machine backup. What I see now is 1. a 4GB iPhoto library existing on the internal drive. 2. an identical 4GB iPhoto library existing on the external Passport drive and 3. a folder named Simpletech with the entire contents of the failed hard drive including all the photos from my original 54GB iPhoto library that resided on the old external hard drive, which are accessible as independent .jpeg files, but no longer organized as an iPhoto library.
Would love to know the steps to having just one iPhoto library on the Passport external hard drive that contains all my images without accidentally losing/deleting any images and messing up pointers. I would not mind eliminating the iPhoto library on the internal hard drive either, provided I could get all the images into the main one.
Angie in Charlotte

while I can see the .jpeg images that were in my original (ext. hard drive) iPhoto library on the new Passport Drive
When you enter Time Machine and go to the Pictures folder do you not see the iPhoto Library in it at different dates?
Click to view full size
If you used Time Machine to backup your hard drive then the iPhoto Library package should be in it. If you did something different please explain in detail what you did.
OT

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

I want to buy a new external hard drive.

I want to buy a new external hard drive, I have an iMac now, I most likely will buy a mac pro this winter. I want to buy a hard drive that will be able to handle the highest quality video, AND work with my iMac now. Thanks
Andrew

And finally:
Make SURE you format the drive as Mac OS Extended, journalling optional but recommended.
Disk Utility Help: Erasing a disk or volume
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1009.html
In step 4, DO choose Mac OS Extended (Journaled).
WARNING: All your currect files will be erased.

Time Machine incomplete backup on new External Hard Drive

I have a LaCie 2TB firewire external hard drive I bought 2 years ago. I made 3 partitions, one called "Time Machine" for TM backups of my iMac HD, one called "Video" for video files, and one called "HD2" that I used to install new programs and store edited photos and img files. I ran TM onto this HD for the last 2 yrs with no problems. I recently decided that I needed to have a backup of my iMac HD --- AND the 2 partitions (Video and HD2) on my LaCie. So I bought a Seagate 2TB external USB HD that I planned to use ONLY for Time Machine.
So I hooked it up and formatted it (no partitions), then went to TM options and selected the new Seagate Hard Drive to backup to, and in the options I excluded the Seagate (by default) and the Time Machine partition on my LaCie. Nothing else was excluded. In other words, I wanted to backup my entire iMac HD, and my Lacie Video and HD2 partitions.
My internal iMac HD has 116 GB used, my Lacie Video partition has 355 GB used, and my Lacie HD2 partition has 175 GB used. So I was expecting the Seagate to backup 646 GB.
When my Time Machine backup started at 1 AM, I was happy to see that the status box showed "Backing up 1 GB of 646 GB." When I woke up at 8 AM, I was happy to see that the status box showed
"Backing up 536 GB of 646 GB."
But it stayed stuck on 536 GB until 12 Noon, then started slowly working again. By 7 PM, the status showed "Backing up 623 GB of 646 GB." Then at 8 PM, the status box disappeared and it seemed like everything was backed up. But my Seagate HD shows only 629 GB of used space. So I decided to check the backup in Finder to see what went wrong.
In the Seagate backups folder, I have three folders - one named "Macintosh HD" which shows 112 GB on disk, one named "Video" with 341 GB on disk, and one named "HD2" with 175 GB on disk.
So it appears that my iMac HD was only backed up 112 GB out of 116GB, my Video partition was only backed up 341 GB out of 355 GB, but my HD2 partition backed up the entire 175 GB out of 175 GB.
So my question is - is this normal, or is my backup really missing 4 GB of files from my iMac hard drive and 14 GB of files from my video partition? I started to look at them file by file to see if they matched, but there are so many files, so I thought I would ask in case any of you might have heard of this before. If your answer is that my backups are corrupt or incomplete, should I reformat the Seagate and start over?
Also, is it safe for me to manually delete all the files in my time Machine partition on my LaCie hard drive, since I won't be using that anymore for Time Machine backups? Or is there a process I must follow to delete those older backups?
Thanks for reading this far and for any advice you can shoot my way.

Thank you for your well thought out response. It was really helpful by showing me where to look at things more closely.
Time Machine automatically excludes some things that aren't necessary for a restore, such as system work files, most caches and logs, and trash.
This is good to know. Although I didn't have anything in the trash, I have no idea how much is in the various caches and logs. I'd be surprised if they totaled 4GB, though. I'm still worried about this backup, as explained below after doing a Console log check.
If any files were open, they may not have been backed-up (a partial file wouldn't be of much use). I don't know of any special exclusions for video files or apps, but there may be some. You might want to try the Terminal command in the yellow box of #11.
I didn't have anything else running except TM, so no files were open. I checked the exclusions in the yellow box #11, the Terminal Command, and /System/Library/CoreServices/backupd.bundle/Contents/Resources/StdExclusions.pl ist, but nothing seemed to point to the video files I have saved. So I'm still at a loss with this part of the backup.
You might want to look at the log of that backup
I looked at the log - thank you for the link on how to see it - but the entries show that the size of the backup was even less than I thought - It seems I am actually missing 0.2 GB from the HD2 partition, 6 GB from the iMac HD, and 14.4 GB from the Video partition. And since it shows the exclusion amounts, I'm really at a loss for the iMac HD now. Here's what the Console listed for this backup:
Aug 29 00:55:54 paul-imac-5 /System/Library/CoreServices/backupd[567]: Backup content size: 174.7 GB excluded items size: 0 bytes for volume HD2
Aug 29 00:55:54 paul-imac-5 /System/Library/CoreServices/backupd[567]: Backup content size: 355.7 GB excluded items size: 0 bytes for volume Video
Aug 29 00:55:54 paul-imac-5 /System/Library/CoreServices/backupd[567]: Backup content size: 116.3 GB excluded items size: 30.5 MB for volume Macintosh HD
Aug 29 00:55:54 paul-imac-5 /System/Library/CoreServices/backupd[567]: No pre-backup thinning needed: 776.02 GB requested (including padding), 1.82 TB available
Aug 29 00:55:54 paul-imac-5 /System/Library/CoreServices/backupd[567]: Waiting for index to be ready (909 > 0)
Aug 29 02:37:30 paul-imac-5 /System/Library/CoreServices/backupd[567]: Copied 3275 files (174.5 GB) from volume HD2.
Aug 29 05:49:40 paul-imac-5 /System/Library/CoreServices/backupd[567]: Copied 5412 files (515.9 GB) from volume Video.
Aug 29 19:18:46 paul-imac-5 /System/Library/CoreServices/backupd[567]: Copied 146976 files (626.2 GB) from volume Macintosh HD.
Is it possible to see how many files are in each drive that I was backing up? If I could match the file count, it might give me a better idea. I used Finder, but it only gives me the GB Capacity, Used and Free. For example, if I could see if the LaCie Video partition has exactly 5412 files (or 2137, if the file count above is a running total), I will believe that all the files backed up but may have been truncated. If the partition shows more than 5412 files, then I'll know that not all files were backed up. So at least I can start looking manually.
It will be much faster and easier to erase the partition with Disk Utility.
Thank you for this advice. This should save lots of time. I won't erase my other partitions when I do this, right? Also, will it leave a blank partition there so I regain my space?
I'm really bummed out by this backup. I haven't used my iMac for anything except Safari since this happened, because I do not want to start working again until I know that I have a safe backup, and I don't want to make any new files until I can resolve this. I thought of just reformatting the Seagate and starting over, but I have a feeling it may do the same thing. So at this point, I don't know if the Seagate is faulty, if the TM is not working properly, if I am making a dumb user error, or if this is perfectly normal. The worst thing that could happen is that my iMac HD or Lacie HD fails and I try to restore from my Seagate TM backup, only to find out that my TM backup is incomplete or corrupt.
So I really do appreciate your help and any additional insight you or anyone else might have. Thanks.

How do I transfer all data from my old internal hard drive to a new internal hard drive

How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

I need to replace my late 2006 20" imac hard drive

here's what i have
VIN,IMAC (20-INCH LATE 2006)
running leopard 10.5.8
Hardware Overview:
Model Name: iMac
Model Identifier:    iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed:    667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version (system): 1.9f4
Serial Number (system): W8******VUV
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model:    WDC WD2500JS-40TGB0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
Volumes: Macintosh HD:
Capacity: 232.57 GB
Available: 106.04 GB
Writable: Yes
File System: Journaled HFS+
BSD Name:    disk0s2
disk utility shows this:
my mac is still running like a champ but as the pictures above show it's time
i've found a lot of people with the same question i have on this site with answers but most links that people suggest are broken or 2 of the hard drives they've recommended are discontiued
i've got a frys electronics and best buy near by or internet if that's the best way to go about it
what exactly do i need to look for when i'm at a store or online?
what size hard drive, any? 250GB, 500GB, 750GB, 1TB
3.5" SATA
7200RPM
does cache matter?
anything else?
people's responses to: Need to replace my late 2006 imac hard drive - what should i be looking for to replace it?
1. You can use any 3.5" Sata drive, WD or Seagate would be good choices.
2. Do not use "green" drives like the WD Blue series. WD Black are fine as are Seagates.
3. The 2T green will work fine in the Intel iMac's. I always suggest using the quieter and cooler running Blue's or Green's in the iMac's.
4. Personally I have upgraded the Hard Drive in several Early Core Duo's using both 320GB and 500GB WD Cavair Blue's.
5. WD Caviar Blue or WD Caviar Green, they run cooler and quieter than the WD Black or Seagate's.
6. I'm very happy with the WD Caviar Blue that replaced my factory installed 160GB Seagate HD a few months ago.
i've found some good DIY tutorials for install
http://www.youtube.com/watch?v=ShY8zuT-wPg&feature=player_embedded
http://www.ifixit.com/Guide/iMac+Intel+20-Inch+EMC+2105+and+2118+Hard+Drive+Repl acement/1092/1
any help will be appreciated,
sean k
<Edited by Host>

thanks for the quick reply kappy,
i plan to purchase a new imac when they are actually shipped, in stores, and i know all my handicap assisted devises will work on it
you say "Do not buy a drive designed for SATA 3 6 Gb/s interfaces as some may not work on the controller in your iMac"
at frys it breaks the groups like this:
Interface (32)
SATA/300 (17)
SATA/600 (9)
PATA/100 (6)
could you take a look at this link to frys and recommend a hard drive
http://www.frys.com/search?cat=-69564&pType=pDisplay&fq=100413%203.5-100415%2072 00
or bestbuy internal hard drives
like you said it's got a limited life and just need something to get by till the new imacs arrive

I need a new external hard drive for my iMac8,1

I need a new external hard drive for my :
Model Name:    iMac
Model Identifier:    iMac8,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    3.06 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    IM81.00C1.B00
SMC Version (system):    1.30f1
Serial Number (system):    YD8520CD0N4
Hardware UUID:    073B29AD-6FFB-5E64-A52C-BF19A054F363
I do not have Thunderbolt on this and when I look up the specs for USB I get
USB Bus:
Host Controller Location:    Built-in USB
Host Controller Driver:    AppleUSBUHCI
PCI Device ID:    0x2835
PCI Revision ID:    0x0004
PCI Vendor ID:    0x8086
Bus Number:    0x3a
Don't know if this is USB 3.0 or USB 2.0
All the new drives seem to use either Thunderbolt or USB 3.0

I have a Western Digital 2 Terabyte USB External Hard Drive and it works like a charm and it costed me $129.00. My opinion is you can't go wrong with this brand and size for home use.
Cheers
Don

New iMac Hard drive age

Similar Messages

Maybe you are looking for