New Imac i5 (2011) CME UF6 Midi Controller not working!

I have a new 2011 iMac i5 2.7GHz Quad-Core.And my CME UF6 Midi Controller is not working . It works fine with my older mac book pro 1.83ghz intel core duo. I have installed the latest driver from CME which is for the intel macs. It shows up in the audio midi setup just fine. But when I click on "test setup" it will only play one note and stop. I will then have to rescan midi for it to play one note again,and again it stops. Same goes for when I use it in a Logic Pro 9 with all the newest updates applied it will play a few notes and stop working. Any help would be great I know it may be some time before I get any help because the this iMac just came out. By the way the imac is all up to date everything is up to date. And yes I have tried every single usb port on the iMac.

Similar Messages

New iMac as second display for MacBook Pro not working

I just bought the new thin 2012 27" iMac as a replacement to the last model I had.
I want to use the iMac as a second display for my 2012 MacBook Pro.
I have a Mini Display Port to Mini Display Port cable that used to work with my previous setup and at work with my external display.
However, this isn't working on the new iMac. When I try the Command + F2 suggestion I've seen in the forums here. Nothing happens.
Do I need a new cable now that these are "thunderbolt" connections?
Any help is greatly appreciated.
Thanks.
Demetre

You will most likely need a Thunderbolt cable as they are both Thunderbolt devices and not Mini DisplayPort.

New iMAC - Time Warner POP Email Send (SMTP) Not Working

Greetings,
Have used cinci.rr.com account for years across many different types of PCs. New to mac world. My new @mac.com account works fine for sending and receiving.
When I added in my cinci.rr.com pop account, I receive fine, but no joy on the SMTP sends. I'm using password auth with a good username and password. Port 25, no SSL just like the help screens from Apple and Time Warner say. (Matches my PC settings also)
Visual symptom is SMTP account offline even when i manually enable online. Removing the 'password' but keeping the username prompts me for a password on connection, but when password is given, Mail reports that ISP doesn't support authentication.
What's the magic setting?
Thanks,

VERY helpful in answering my Rochester.rr.com account. So I turned off my authentication, but had to leave my wife's on because "no two settings can be the same" or whatever it said. I assume that's okay because I just tested both emails and they both sent.
Any issues with one being set to "no authentication" and one using a password? Does everything just send off of one server? Or should I change her port setting to something else and then change it to "no authentication"?

New iMac (Lion - 10.8.2) - Pogo would not work as Java was not installed. Went into Utilities - open Java Preferences - it has now disappeared - now where to be found. I went into the Terminal - input 'java -version' - it says I have version 1.6. Help!

My Java and Java Preferences do not show up in my 'Utilities' folder nor can I have them in a search. If I can't find them I can't enable Java. Tips - Tricks!!

System Preferences->Java

Brand new iMac 27 2011 won't boot after Lion upgrade

Got a brand new iMac 27 2011 yesterday and did an update to 10.6.8 first before installing OSX Lion over it...
After restarting it just shows then the "prohibitive icon" on screen and shuts down after few seconds...
It won't even boot from an USB stick with the OSX Lion image on it...
Recovery partition works but can't do a reinstall from there....
So going back to 10.6.8 now...

Just so you know I purchased brand new imac in July and did the same upgrade as you. I just installed Lion but did not have any issues. Only one concern overall though, it slowed down my new imac a bit. Not sure if there are settings or not but Leopard was faster than this. AppStore, iTunes are eating lot of memory and CPU util goes up.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

I just updated to the new software and now my app Store is not working It is just a white blank page

I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks x

You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

HT2731 my new apple accont is verfied but it is not working what schould i do now

my new apple accont is verfied but it is not working what schould i do now

First thing to try is to connect it to the charger that came with it and plug that into the wall outlet. Let it charge for an hour. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the. Phone starts up continue with the setup procedure.
If the phone still does respond Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I just bought a brand new iphone 5c and the home button is not working , why is that ?

I just had a brand new iPhone 5c and the home button is not working , why is that ?

then contact apple for warranty support or return the phone

PCI Simple Communications Controller not working

PCI Simple Communications Controller not working on hp pavilliong6-1003tx

Hi
Download, save & install --
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94322-2&cc=in&dlc=en&lc=en&...
Restart system after installation.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

I upgraded my new ipad with iOS 6 but siri is not working?

I upgraded my new ipad with iOS 6 but siri is not working?

Enable Siri
http://www.todaysiphone.com/2012/09/ios-6-overview-siri-for-ipad-3/

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.

New Imac i5 (2011) CME UF6 Midi Controller not working!

Similar Messages

Maybe you are looking for