New iMac......which version of Windows 7 to use?

My 24" iMac was killed by a lightening storm a few weeks ago.
I just received a new 27" iMac with the i5 Quad Core yesterday.
The hdd was not destroyed in the 24" and I was able to pull all my old files/music/photos off of it.
I would like to dual boot the new iMac into Windows 7.
Is there a required version for it to work correctly?
I was thinking of just getting Windows 7 Premium. I only have a few apps I want to run under Windows 7.

If you are going to use Boot Camp it only works with Windows 7 on the new machine. Any version of Win 7 will work.
BTW you may want to invest in a UPS, that may have have saved your old machine and if it was damaged most UPS manufacturers will cover for damage if it occurs when a device is plugged in.
Roger

Similar Messages

  • My iMac was stolen in a robbery - no files via iCloud (long story).  I have a new iMac which is set up and being used - how do I recover old iMac files from what looks like back-up files showing on my Time Capsule (also being used for this new iMac)?

    My iMac was stolen - but I think there's a backup on my Time Capsule (which wasn't stolen). I have a new iMac which I've been using normally; I didn't use the 'Restore from...' option at the start because I thought the Time Capsule had nothing on it.  So how do I now recover files from the Time Machine?  I can see various back-ups on the Time Capsule, from various machines - laptops, etc. - but it's not letting me open any of them to see what they contain. Does anyone know how I access this information?

    Use migration assistant.
    See http://pondini.org/OSX/MigrateLion.html
    Although this is only up to Mountain Lion it is still relevant to Mavericks.. only expect Mavericks to kick and buck a lot more.

  • Which version of Windows is best for my MacBook Pro?

    I have a MacBook Pro and I'd like to install Boot Camp onto it, but I need the proper version of Windows.
    Some information?
    MacBook Pro (13-inch, Mid 2012)
    Processor 2.5 GHz Intel Core i5
    Memory 4 GB 1600 MHz DDR3
    Graphics Intel HD Graphics 4000 1024 MB
    Also, the resolution is 1280 x 800. Thanks!

    Hey cashe0815,
    Thanks for the question. The following resource outlines the various requirements for Bootcamp and which versions of Windows you can use based on your specs:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Thanks,
    Matt M.

  • Which version of Windows to use with boot camp & Lion?

    Which version of Windows can I use with Boot Camp and Lion 10.7.1?
    Don't want to run Parallel or any other 3rd party program.
    Thanks.

    Windows 7

  • When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

    When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

    Welcome to Apple Support Communities
    Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
    Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • HT4796 How do I find out which version of Windows XP my computer has?

    I'm trying to transfer my information from a PC to a new iMac.  How do I find out which version of Windows XP is on my computer?

    XP is the version.
    Switch Basics: Migrate your Windows files or system to your Mac

  • I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files.  I have downloaded iMac library manager and can see them. can someone shed some light please ?

    i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
    and it's not reading the files.  I have downloaded iMac library manager and can see them.  when i go back into iphoto i'm getting the following message :
    Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
    I don't know what to do - please help !!!!
    can someone shed some light please ?

    So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Which Version of Windows 7 Should I use?

    I hve a fairly new Macbook Pro. Mid 2012 Version just before the new display came out. My question is, which version of Windows 7 should I use? I've noticed that I can purchase either the 32Bit or 64Bit version, but I am not sure and don't want to load something that might be bigger than I need. I'll only be using Windows to run The Sims 3. This means over 9 expansion packs+ and their EA store content.
    Here is what I am running on my mac:
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f38
      Serial Number (system):          C1MHN1TNDTY3
      Hardware UUID:          8CCE66F6-C4B6-5EDB-9CE7-FFB43E25F89D
      Sudden Motion Sensor:
      State:          Enabled
    As you can tell this isn't a higher end Macbook Pro, as it was a gift, but I am unable to play the game without it crashing since they do not have an updated patch for Mac users - and it is very unlikely that they will even care to update the patch. This seems to be the only guarenteed fix. I appreciate any help I can get, I just need responses soon so I can take advantage of the low prices for Windows 7 before they run out.

    Microsoft will be supporting Windows 7 with full updates for another two years, so you won't have to worry about supplies running out any time soon.

  • Which versions of Windows 7/8 are supported/best for Boot Camp 4/5?

    Hello
    As the title suggests, I'm a bit confused as to which versions of Windows 7 work with Boot Camp 4, or whichever ships with Mountain Lion (which one, 4 or 5, comes with ML 10.8.3?).
    Mainly, I want to know if I can use an OEM copy, and what difference it makes to me, the end user, as opposed to a full license disk. Additionally, which service packs are supported? Eg, SP1 or SP2 or ...?
    Lastly, and this is more of an opinion question, but is Windows 7 or 8 better suited to a Mac? I have 2.5 GHz i5 processor, 8GB RAM, ML 10.8.3, Macbook Pro 13-inch Mid-2012.

    You can get a better idea of which version are supported by each Boot Camp version in this website > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
    In general, Boot Camp 4 supports 32-bit Windows XP, and 32 and 64-bit Windows Vista and 7, and Boot Camp 5 supports 64-bit Windows 7 and 8 versions (in compatible computers).
    You can use a OEM or System Builder license, always that you have bought it from a source like Amazon or NewEgg. If you are trying to use the copy you got from another PC, it won't work. Boot Camp supports Windows XP SP2 and later, so all service packs released after it are supported.
    Windows 8 has been out for a few months and it has got a new interface. If you don't want to learn a new interface, go for Windows 7. Both versions will work properly on your computer, so it's a matter of personal choices

  • Which version of Windows (XP, Vista, 7?) is best for MacBook 2.2Ghz Intel Core 2 Duo, OS 10.6.8 when using boot camp?

    Hi all,
    I am about to install boot camp, and I was wondering which version of Windows works best for my Mac.
    Many thanks for your help.
    Francesco

    you really have only one choice, Windows 7 64-bit Home Premium but you can save by buying the System Builder edition.

  • Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks

    Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks

    Are there photos in the Library? If not then just trash it and launch iphoto. It will make a new one.
    If there are pics in it then Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • Can't open After Effects (version 11.0.2) in New iMac (OSX Version 10.9.4)

    Just bought new iMac (OSX Version 10.9.4) and downloaded After Effects (version 11.0.2). On opening After effects I received the message 'You can’t use this version of the application “Adobe After Effects CS6” with this version of OS X.' After googIe ing it, I then downloaded the After Effects 11.0.2 update. I then re-started my computer, but after effects still gives the original message 'You can’t use this version of the application “Adobe After Effects CS6” with this version of OS X.' Please help! :-)

    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5696&fileID=5715
    Go to this website and download the latest After Effects CS6 (11.0.4)

  • How do I determine which version of windows os is installed on the computer that my application is running on.

    I need to determine which version of windows os in on the computer running my application to make some minor adjustments to a subvi.  Is there a programmatic way to determine this using Labview.

    Or, use the Application property node Application>OS>Detailed Name.  Although I can't say anything about its output on other-than-Windows OSes.
    By the way, I think you win the "reviving old thread" award today
    Dave
    David Boyd
    Sr. Test Engineer
    Philips Respironics
    Certified LabVIEW Developer

  • Which versions of Window can perform best with CiscoWorks?

    Hi,
    Please advice that currently we have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well.
    Please advise that which versions of Window can perform best with CiscoWorks.  E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. Please advise us the full windows release version as we will upgrade windows as per your suggestion.
    We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1

    Please refer to the Installation Guide for Windows server requirements. Here is the link:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1099303
    Given that you want to stay with Windows Server, Server 2008 Standard Edition with service Pack 2 would be your best choice.
    NOTE that your should not (and cannot) use Server 2008 R2. That version in only supported with LMS 4.0.1. LMS 3.2 will not work with Server 2008 R2.
    With a 64-bit OS, you can increase your RAM - which is usually constraining system performance on systems with 32-bit OS. I recommend just putting in 16 MB. Why skimp on $100 RAM with $20,000 software?
    Your other alternative is to divide the server roles across several machines. That is a pretty complex task so I'd do the OS and RAM upgrade first and see how that helps you out.
    Re "Linux" LMS 3.2 (and 4.0/4.0.1) is only supported on Windows and Solaris operating systems. Plus if you're not a Uniux admin, the learning curve can be steep for your first dip in the water.

  • I have a fairly new imac osX version 10.6.8. How do I know if I have snow leapard?

    I have a fairly new imac osX version 10.6.8. How do I know if I have snow leapard?

    You do, since "Snow Leopard" is the code for 10.6. If you had 10.7, you'd have Lion. 10.5 was Leopard.
    Matt

Maybe you are looking for

  • How do i make this page adapt to all screen sizes???

    if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes?? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

  • Analog to digital converters

    Not sure in which forum to place this , but looking for a converter box for VHS tape to mac (&then to dvd) have seen several models that are windows only, any reccs for a mac compatible converter please advise

  • Issue when transfer data from R/3 to APO

    Hi All, When we transfer material master data from R/3 to APO then data is not updating in APO system.Could you please let me know the steps to debug CIF queue while transferring data from R/3 to APO. Thanks Mohit khandelwal

  • Problems with site definition in CS5

    I am trying to define a new site in DW CS5. When I enter the site information in the dialogue box I get the following message: The spry assets folder is not inside the site. Please select a valid folder in your local site root. The program automatica

  • Images in Flash Mapping Client??

    Hi, Now, I'm working with Mapviewer using the Flash mapping Client. It works quit well. I'd like to know if you can insert an image like a JPG or GIF. Thanks