New imac with 256 ssd and 1TB HD want OS leopard and lion.
I want my new imac to be able to boot into leopard or lion. Should I partition the SSD or install the second OS on the second HD (1TB HD). I have plenty of room on both since I don't tend to store much on the HDs.
I haven't received the imac yet so I'm not sure if it will come preloaded with Lion.
Well, if it comes with Lion preinstalled, then you will most likely not be able to boot into Snow Leopard. The point is that no Mac can boot an OS older than what it came with: notable exceptions would be Macs that are manufactured right around the time of a new OS release; in those cases, it may or may not be possible. It would depend on the machine and OS builds - you would have to ask Apple if it would be possible in your case.
If you ordered a refurb from the Apple store, then when was it manufactured? And, they do show which OS is loaded on that page.
Similar Messages
-
Can I configure a new imac with separate ssd and hd
I don't know for sure if it's been announced so this information may not be out there and I realize we are not supposed to speculate. Havinvg said that can anyone comment on whether it will be possible to configure a new iMac with both and SSD and HD drive without using a fusion drive?
For video editing I don't think I want a fusion drive. I'm either going to get a refurb soon or wait ... and the whole fusion thing is such an unknown for video editing. If I order without more vid editing information with regard to a fusion drive I'd probably want an SSD boot and internal.... I'd use my externals for most work but an ssd plus internal hd would be nice.
thoughts?Based on the tech specs here, it appears the 27" iMac has one space for hard drive, fusion drive, or SSD, which are orderable on a build-to-order system.
-
My new iMac with 256gb SSD and 2TB HDD wont allow me to transfer data from another iMac
I just recently purchased a new iMac 27" with a 256gb SSD and a 2TB HDD and when I started it up and tried to transfer my data from my other iMac it wouldnt let me because I had too much data on my old iMac. Please assist me on how I can transfer my data to the 2TB drive or if there is anything els that can be done.
See Here for
Transfer from Old to New
http://web.me.com/pondini/AppleTips/Setup.html -
Any help would be much appreciated! Thank you!
Hello,
http://support.apple.com/kb/ht1449
http://support.apple.com/kb/PH2506
http://support.apple.com/kb/HT1229 -
Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
BrianWelcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 -
I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?
If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.
-
Long title. Sorry. It pretty much explains the situation. I'd like to have all of my photos from two (ultimately three) computers on this central file and be able to access them from any of the computers. The error message I get when I start up my MBPro is: "You can’t open your current photo library using this version of iPhoto" and, "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." It then forces me to quit iPhoto. I have tried the suggestion of holding down the opt key on iPhoto startup, but it doesn't seem to help.
Two questions:
Can I store multiple iPhoto libraries on the same central disc?
If so, how should I address the error message?
Thank you!Hey Kappy, thank you for your help! Yes, I can open both libraries on the iMac without problem. I am still confused why the computer that created one of the libraries cannot open said library after it was moved to the external disk. Why is the iPhoto format not readable by all versions across the board?? The reason I'm pushing the issue is because in my household, we have an older MB, my wife's MBP, my MBP and now a new "family" iMac. The MB (circa 2007) has an old version of iPhoto, the two MBP's have iPhoto '08 and the new iMac has '11. It is my goal to have all of the photos that we've accrued over the years, located centrally, and accessible from all of these computers. Is iPhoto the most appropriate program, or would Lightroom make more sense?
-
Transferring old iPhoto library to new iMac with iPhoto 11
I have an external hard drive which contains my old iPhoto library (let's call it iPhoto A library) with about 10 years of pictures. This was saved from an older version of iPhoto. Since then, I started a new iPhoto library (let's call it iPhoto B library on my old computer but with iPhoto now upgraded to iPhoto 11).
My question is: now I have a brand new iMac with iPhoto 11 (and absolutely no pictures currently in it!). How do I successfully transfer both of my iPhoto libraries over to my new iMac? I would prefer that they be in one library, but I'm not strongly opposed if they need to be in separate library. My second question: if they are in separate libraries, when do I save them? Same folder? Where?
By the way, when I try to open my iPhoto A library, it says "The photo library needs to be upgraded to work on this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete."
Thanks so much to the Community for helping me!How do I successfully transfer both of my iPhoto libraries over to my new iMac?
drag them over (of course they can not have the same name) - Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
I would prefer that they be in one library, but I'm not strongly opposed if they need to be in separate library.
There is no way to do this with iPhoto - if you have iPhoto '11 version 9.3 or newer you can purchase Aperture and use it to merge libraries. Or you can purchase iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - and use it to merge iPhoto libraries.
My second question: if they are in separate libraries, when do I save them?
Where ever you want - if you have seperate libraries you switch between them by depressing the option key and launching iPhoto and using the switch library window
By the way, when I try to open my iPhoto A library, it says "The photo library needs to be upgraded to work on this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete."
That is correct - old versions of iPhoto can not access newer versions libraries
and what ever you choose to do be sure tha tyou backup procedures are backing up everything
LN -
if i order a new imac with 1tb flash is that pcie based to where i could add a 3.5 ssd and does it still have the bracket and sata cable to add one in it
Be advices that the newest iMac's are basically SEALED Units and taking it apart in any way, other than removing the Memory slot cover to add more RAM (That is on the 27" model. The 21.5" is completely sealed), will void the warranty on it.
Not only that but the screen is Glued to the aluminum casing and if you do pry it off with damaging it you'll need new adhesive strips to remount it.
Not worth the efford or the cost when you can buy mat any other brand computer for less money and do all the upgrading you would ever want without ever voiding the warranty or breaking something in the process. -
Need help with workflow: New iMac with SSD & HDD and Pegasus Promise
Hello everyone! I've decided to upgrade my iMac and ordered an i7 with the SSD and HDD drive configuration as well as the Pegasus Promise 12TB drive. I've been researching as to what's the best way to manage both the SSD and HDD drives and I really haven't seen an end-all answer. Now with the purchase of the Pegasus Promise, I'm more confused as to what's the best approach to take. Here are my thoughts:
1. Use the SSD as the boot and application drive and the HDD for the users folder.
2. Use the SSD as the boot and application drive, the HDD for the users folder, and photos and pics onto the Pegasus.
3. Use the SSD as the boot and application drive, the Pegasus for the users folder, and the HDD for ???
4. Just use the Pegasus drive as the boot drive and use it for everything. (being that it's a RAID drive, then all my files are backed-up already)
Majority of my space-filling files are my iTunes folder, tons of pictures from using Aperture, and iMovie for videos.
Thanks in advance for everyone's input and help!I'm working on a similar premise. i7, SSD, HDD, Promise raid, etc.
I'm nowhere near as savvy as a lot of the people here, but after a lot of research I decided that focusing on how the Pegasus gets configured is the most important for me. My concerns are for a business in photography, btw.
I can't budget the 12TB unit so I'm trying to make the most of either the R4-8tb or th R6-6tb.
I'm planning to launch the applications from the SSD. I will use the Mac HDD for typical non-photographic files, iTunes (mine's not so big), and standard fair. This is all backed up via Time Machine to a 3TB Western Digital MyBook for the time being.
As for the Pegasus, I believe I've settled on: taking an R6-6tb unit, placing the 6th drive in my firesafe from the moment I get it. Configuring the remaining 5 drives in a level 5 setup. Leaves me 4TB to get started and buys me a few succesful quarters to plan on daisy chaining another unit when memory is needed. This way, I may not have maximum possible drive space, but I've got a replacement drive on the ready should I experience a drive-failure. Then, I'm not sitting on pins and needles while I await a replacement; they'll simply be shipping me a new "spare".
I still need to actually speak to someone @ Promise to make sure this will work, as I stated: I"m learning as I go here. If this is an acceptable Raid setup, you would have 8TB available to you.
Personally, I am far more comfortable running systems in series and building the size as I go (to a point) than putting so much data in a single array.
[Edit] The raid bay is mainly for the Lightroom catalog, and I use standard external drives to store redundant backups off-site (1TB at a time). -
I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates. -
Wacom Intuos Tablet and Pen not working on new iMac with OSX 10.9.4
Hi there, I've been using an A3 Wacom Intuos tablet and pen for many years now on a 2006 iMac for my illustration work, but I cannot get them to appear or work on my new iMac with OSX 10.9.4. I think they are the original Wacom Intuos tablet and pen. Does anyone know if they are just out of date now and aren't supported on the new OSX 10.9.4? Any advice would be greatly appreciated as I need to work and it's frustrating!
Many thanks,
SteveBarbara B.
I have done as you suggested; I uninstalled PSE 11 and set my wife's account up as admin and reinstalled from there. Still have the same problem with my wife's account, but when I went to mine it is working correctly. Any ideas on why that would be? I'm sure it should work on both accounts. I have 2 accounts on my Mac Mini running OS X 10.6 Snow Leopard and it works on both.
Thanks for your help; at least it's working on my account so that's a great improvement. -
I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though. -
I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?
When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.
Maybe you are looking for
-
Can't install panther 10.3 on iMac G3
first of all, sorry for my bad english, and lack of capitals : i am using an old version of internet explorer version 5 i guess, which does not recognise the french characters, accents, capitals and the rest... now my main problem : i am trying to in
-
Why targetcosts are not displaying in cost analysis
hi i have created productcost collector thru kkf6n for a material. for that material i have backflashed and confirmed thru MFBF.then i display the cost analysis of productcostcollector where system is showing only Actual costs not target costs.
-
Pro Tools 7.4 LE compatible w/Leopard OS yet?
Digidesign website is no help. Anyone heard if Digidesign worked out the bugs for Pro Tools 7.4 LE copatibility w/Leopard OS yet? Thnx.
-
Hi, I have to create authorization for InfoProvider documents. First I create documents in the Documents screen of the Administrator Workbench. After that, in Bex web Application Designer I use Single Document Item to dispaly documents from my InfoPr
-
Hi, Currently we are in 4.6C and are planning to carry out archiving for the first time. I would like to know if there is any other transaction code for archival than SARA and is it the job of functional or basis or technical consultants? Thanks Su