New iMac won't recognize Aperture 3 Serial number?

Hello
I am trying to load aperture 3 on my new imac. When I enter the serial number it gives me the message "You have entered an upgrade serial number. Please enter your original serial number". What I am entering is the original serial number that came with aperture 3. A couple of things that maybe important to note is that I have used both aperture 1 &2 prior to installing aperture 3. As well, I am currently running aperture 3 on two additional machines which I will be slowly fazing out.
Any suggestions would be appreciated.
Thanks, Shane

The key question is, is the Aperture 3 that you bought an upgrade version or full version? And how and when did you buy it, Apple online store, DVD or App Store?
If it is an upgrade version you will need to enter you're Aperture 2 serial number. If it is a full version then have a look at Troubleshooting Professional Application Serial Numbers and Pro Application Replacement Serial Numbers
Finally you can try going to /Library/Application Support/ProApps and seeing if there are any files there with Aperture in their name in some form. Post back if there is.
regards

Similar Messages

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
Hope this helps.
MtD

Help! New iMac won't recognize ethernet cable and can't check it

I just unboxed my new iMac and can't get on the internet (I'm on my powerbook). The problem is this; in Network, it says "The cable for Built-In Ethernet is not plugged in." Only, it is. Can't be the cable b/c that's the cable I'm connected with right now. So, I go through "assist me" and when I click on "Assistant" it takes me to the Intro page where I'm supposed to give a Location Name. I do this, calling it "home." The ver next screen, after clicking "continue" takes me to "How do you connect to the internet?" The problem here is that, of the 5 options, only one is selectable. Airport is the only one that can be selected?? "I use a telephone modem to dial my ISP" as well as "DSL Modem/Cable/Lan" are all greyed out..they cannot be selected. I use an ethernet cable. Why is this not able to be selected? It's very frustrating. I've turned off Airport and Bluetooth, yet I still cannot check any of these. I need to check "I use a cable modem to dial my ISP" but I can't b/c it won't allow me. Can anyone help me here? I can't use my brand new iMac and it's kind of a bummer. I thought these things were plug and play? Thanks.

I went and checked logs. Now, I'm not exactly sure what it means, but this is what it shows in the console.log:
Mac OS X Version 10.4.10 (Build 8R2218)
2007-09-28 08:15:33 _0400
2007-09-28 08:15:34 SytemUIServier [80] lang is:en
Sep 28 08:15:43 cory/System/Lybrary/CoreServices/mcxd.app/Contents/MacOS/mcxd:
MCXD.initializeDirectoryServices: Unabe to get the ethernet address
So, I'm curious about that last line. I'm completely stumped. I'm going to have to call apple care. I plan to speak with my IT guy who installed my SW to see if there's any pref's or something that my agency puts on the agency computers that would maybe be doing this. He said he'd be doing a "build" on my machine so that I had that same software I have at work, so I could work from home. Don't know how that could cancel out my ability to select Ethernet in my Network Port Configurations, but who knows.
I'm just bummed I have a new computer and can't get it up and running.

New iMac won't recognize Motorola iMac (both on 10.5.5) Migration Assistant

I just brought home a new Intel iMac, and tried to transfer data from my old iMac. Both the old and new Macs are running sys. 10.5.5. I have followed all instructions in Migration Assistant, but after I restart my 1.8 GHZ Power PC G5 (holding down T button), the new iMac thinks it's still starting up. I see the Firewire symbol on my old Mac's screen, but the new one doesn't recognize that the old one has restarted. In case I had a defective Firewire cable, I changed it out, but no luck. Any ideas, anyone?

Rdonald wrote:
I just brought home a new Intel iMac, and tried to transfer data from my old iMac. Both the old and new Macs are running sys. 10.5.5. I have followed all instructions in Migration Assistant, but after I restart my 1.8 GHZ Power PC G5 (holding down T button), the new iMac thinks it's still starting up. I see the Firewire symbol on my old Mac's screen, but the new one doesn't recognize that the old one has restarted. In case I had a defective Firewire cable, I changed it out, but no luck. Any ideas, anyone?
Welcome to Apple Discussions:
Sometimes it's a timing thing. First try disconnecting and reconnecting the cable while both machines are running.
If that does not help, start the old machine in Target mode with FW cable connected but don't start second machine until first is fully booted in Target mode, or if they are already connected and running, reboot the new Machine (same thing).
Lastly, I am not sure you can migrate from a PPC to an Intel, but I may be wrong there, never having tried it.
What does Motorola have to do with this? Just curious. I didn't think they make iMacs.
Message was edited by: nerowolfe

New iMac won't recognize external drive

My Buffalo external drive won't show up on my new iMac (neither on the screen nor in Disk Utility. The only difference from when it was working before on my old iMac is the new firewire connection.

What kind of cable are you using, if it has a FW400 to FW800 adapter that is probably your problem. If the EHD only has FW on it and no FW 800 then I'd recommend a cable like this one. You can probably pick one up at your local computer store, Radio Shack or of course Amazon. You can also try doing a SMC reset.
*SMC RESET*
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
*PRAM RESET*
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.

New iMac won't recognize old AIM account

Got my parents a new iMac and trashed their old e-Mac. Started from scratch, ported nothing from old machine and got everything installed and updated OK. In launching iChat, however, it pulled me through a new install and then forced me to register as a new account. I use the old ID and password but it says that it's already taken (Duh! Yes, by me.) Dead end. Did not want to create a new iChat or AIM account.
iChat opens but it's not showing the AIM account (it does show Bonjour, however) and all the pull down commands (Buddy List, etc.) are grayed out.
How can I get this new iChat app to see my old AIM iChat gateway?

Great!!!; thanks.
(I was following the "Set up..." button and putting myself in an endless loop of creating a new account and not being able to use the old one. Should have ignored that and just entered the old account.)

New iMac won't recognize my external monitor.

I just upgraded my workplace computer to a late-2012 iMac (with the thin edges) from the previous older model.
I have an external monitor that I use as a secondary screen - a Samsung SyncMaster BX2440 - that worked great on my older machine using the DVI adapter.
When I plug the same adapter into my newer machine, it won't recongize the external monitor.
I tried resetting the PRAM, but no dice.
Is this a Thunderbolt issue, and if so, how easy is it to resolve? Do I just need to get a newer DVI adapter?

Loner: I looked at that and it only shows the main iMac display. Doesn't show the other device.
The model I'm using is a Thunderbolt machine (has the lightning bolt arrow icon). The previous machine was a DisplayPort model.
The adapter is the Apple-issued DVI adapter, but I'm guessing that even though TB and DP use the same physical plug interface, the adapters are not compatible?
(The adapter has the standard monitor icons on it - box with vertical lines on either side).

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R.

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R. Any clues? Nothing shows up in Finder as far as a Device, and I have a message telling me to "Insert a blank disc to begin" and that I will need a disc with at least "47.6 MB"--it's only 18 photos, and I need to burn them for a parent of a student (I'm a teacher). I have tried several different discs, so it's not the actual CD or DVD.

Create a new folder. Place the photos in that.
From the Finder File menu choose New Burn Folder. That will appear on your desktop. Place the folder of photos you created into that.
Now open Disk Utility and you will see that Burn Folder listed. Choose Burn from the menu.

New imac doesn't recognize firewire 400

Just got the new imac and transferred all data from my old (non-intel) imac using a firewire 400-to-800 adapter.
Now, my new imac doesn't recognize my external (400 firewire) drives anymore. One of the drives has an USB which works with the new mac but transfers are very vey slow. The other drive has only firewire 400 and doesn't get recognized at all.
Any solutions?
Thanks.

Adapters can be troublesome, I'd recommend replacing with a Firewire 400 to 800 cable like this one. You can normally find these at your local computer store, Radio Shack or of course Amazon.
Roger

I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

I changed batteries in my Apple track pad and now my iMac won't recognize the USB keyboard

Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

New Mini won't recognize Apple USB modem

I hate being thick but I can't figure out why my new mini won't recognize the Apple USB modem I just purchased. The network preferences see the built-in Airport card, Bluetooth, Ethernet and Firewire, but I cannot get it to recognize any kind of modem (internal or external).
I figured it might be an uninstalled component (this is the Mini with built-in Airport) and looked through the OS X installation discs, but no. I can't find any drivers on the Apple site for the modem... has anyone had any success with this?
Many thanks in advance,
m.
Mini / 1.42Ghz/airport Mac OS X (10.4.2)

Doh! Upgrading the system to 10.4.4 did the trick. I guess the right drivers for the USB modem weren't in the earlier version to be recognized.

IMac won't recognize midi device

IMac won't recognize midi device (Roland Fantom) which is connected via USB only; no midi interface. I have rebooted both the Roland and the iMac, still no go. I have manually added the midi device under Audio Midi setup, still none of my apps will recognize the device; Logic Pro, ProTools and Sibelius. How do I get this configured? I've read through some other posts and nothing has worked.

Its standard for all computers - if you have 3rd party things that do not work - contact that company - they may have a driver for you to download specific for mac.
Some 3rd party things are windows only - probably same for Mac.

Why my new iMac won't read my external hard drive?

Why my new imac won't read my external hard drive??

Liz,
Sorry for not responding sooner, I support your position completely - as for the external drive I assumed that the individual was a previous mac user and knew about that (my mistake) at home I have a couple of external drives
one drive is acknowledged regardless of format (mac/win) its a partitioned drive.... the other one - far as the mac is concerned does exist when i connect it. I believe its a win only drive (will have to check the specs on it) but it works on the win-notebooks.
so my point of reference was coming that perspective, with no additional posts I have to assume you had the correct answer. have a great day.

My new imac won't operate youtube even after installing the latest flash

my new imac won't operate youtube even after installing the latest flash

Problem solved!
I had downloaded and then installed Flash, and restarted.
The problem? I was expecting Youtube to work as on my old PC, where you get a little pop-up menu at the bottom of the TV screen to play. pause etc. That won't happen on a Mac until you click on the oblong that says Flash in the middle - I didn't know that!
Hooray!

New iMac won't play many of my purchased iTunes songs

I have 2 of my 5 computers authorized for iTunes. My new iMac won't let me play many of songs, and I get a message that my iMac is not authorized to play the song I paid for on my other computer. I repeatedly go through the process of telling it my iMac is authorized...it agrees, then returns to tell me it cannot play my songs because my iMac is not authorized. What step am I missing?

Here is what customer service is now telling me to do:
I'm sorry to hear that you have been experiencing difficulties with the iTunes application. To resolve this, I recommend uninstalling and reinstalling iTunes. Before beginning, please back up your iTunes library as explained here:
How to back up your media in iTunes
http://support.apple.com/kb/HT1382
To uninstall iTunes, please follow the steps in this article:
Removing iTunes for Mac OS X
http://support.apple.com/kb/HT1224
After you've uninstalled iTunes and removed the related files, you will need to reinstall it. You can download the latest version free of charge from the iTunes website:
http://www.itunes.com/download
After you've reinstalled iTunes, please ensure you have the latest version of QuickTime installed. You can find the latest version here:
http://www.apple.com/quicktime/download
If you continue to experience difficulties with iTunes after uninstalling and reinstalling it, you may wish to call our AppleCare technical support team. A representative will be able to tell you about Apple's complimentary and fee-based support options and can help you determine which option might be most helpful in this case. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
I hope this information has been helpful.
I havent gone through this whole process yet, has anyone else tried this yet?

New iMac won't recognize Aperture 3 Serial number?

Similar Messages

Maybe you are looking for