New Image Deployment and Customization

Administration needs to deploy thousands of new images to new workstations. Existing workstations being replaced contain customizations that should be transferred to the new images without modifying the fundamentals of the new images. In addition,
both the existing and new images employ full disk encryption. Any suggestions or resources that might reduce effort would be most welcome.
Marty G.

Hi,
To migrate User profile data, app and profile settings, I would like to suggest you use User State Migration Tool (USMT) do finish this job.
Here is some material about USMT may be helpful:
User State Migration Tool (USMT) Technical Reference:
http://technet.microsoft.com/en-us/library/hh825256.aspx
Example:
Using USMT V.5 to Migrate your Profile Data, Apps & Profile Settings:
http://blogs.technet.com/b/nepapfe/archive/2013/04/15/using-usmt-v-5-to-migrate-your-profile-data-apps-amp-profile-settings.aspx
If you need any further help about this problem, please feel free let us know.
Roger Lu
TechNet Community Support

Similar Messages

New Image Size and Resolution in CC

Hi there.
Ok, maybe i'm missing something, but how do i reduce the ppi's of a given image in the Photoshop CC? Changing it in the image size, in the Resolution field, it acomplish nothing. It logs an entry in the History panel, but nothing changes in the picture. Did Adobe changed how this works, or it's just a bug?
Thank you.

Try setting to real-world measurement, like inches or cm.
Hi Charles, i think that change in cm/mm/in it's the only way to change the image ppi (in my case save/resample it to 108ppi). Can you confirm that this is correct?
Anyway when i go to image size (new panel of CC) the w/h are:
1) grey and always set in pixel with resample flagged.
2) always set in inches with resample NON-flagged (also if my ruler unit is in Pixel).
(and actually that is not new behavior. CS6 behaved same way when width and height were set to percent)
In CS6 and CC i never seen w/h in percent - where is my error?
Many thanks!

Custom Image deploy and custom default profile how?

Hi,
I have custom created wim image(Windows 8.1 update2 x64 enteprise) with all programs that I want - like:
Office2013
7zip
antivirus software
etc...
Question is - Can I create default profile with my custom settings (control panel list icons, This PC icon show on desktop, Outlock icon pined on taskbar....)?
I am create custom start menu but all other settings I cant modify.
I am found sysprep solution and ansver file but it is to complicate and
requires much more time.
Can I somehow copy administrator profile to default profile with all settings like I have in admin account?
I dont understood why microsoft prefer sysprep way for create image? I think that is much
easier periodically create an image
with all applications and updates with default profile.
After implementing image wsus takes him for update and
everyone is happy.

My latest issue - I am uninstall all store apps(with powershell some command with -online )for all users but apps
appear again when the new
domain user log in.
Too many problems. Thank you for your replay.
Hi,
For this question, this because the default user profile still have these app installed.
And we need to set the default domain user profile without these apps to over-write the one on local machine:
How can I set the default domain user profile?
http://windowsitpro.com/windows/how-can-i-set-default-domain-user-profile
Kate Li
TechNet Community Support

Adding New Image and Text to an Existing Page Created with Tables

Working in DW 5.5
I'm trying to add a new image/link and small amount of text to an existing web page that was created with tables and centered. I am using AP Divs. One for the image and one for the text. Everything functions fine, but I can't get the new items to anchor and re-center with the rest of the page. I am not able to overide the "Absolute Positioning". I've tried different solutions from various tutorials but I can't seem to make them work with tables.
The added items are a Facebook button and text.
Go to: http://www.sugarhollowfarms.net/index.html to see the problem.
Please help. I'm not that experienced.

Make a back-up of the page first before you implement the changes below!
Take the below bit of code from <div id="FBlogo">...... to.......... </div> 
and insert it directly after the opening div tag FWTableContainer and before your opening table tag (see position below):
<div id="FWTableContainer209091602">
<div id="FBlogo"><a href="#"><img src="images/fb.png" alt="fb" width="62" height="62" onClick="MM_openBrWindow('http://www.facebook.com/SugarHollowFarms','facebook','toolbar=yes,location=yes,status=yes, menubar=yes,scrollbars=yes,resizable=yes,width=1000,height=800')"></a>
<p class="bodytext"><strong>Join us<br>
on Facebook</strong></p></div>
<table border="0" cellpadding="0" cellspacing="0" width="800">
Then add - position: relative; - to the FWTableContainer css (as shown below):
#FWTableContainer209091602 {
    /* The master div to make sure that our popup menus get aligned correctly. Be careful when playing with this one. */
    position:relative;
    margin:auto;
    width:800px;
    height:600px;
    text-align:left;
    top: 20px;
    background-image: url(images/homepage_new3.jpg);
    border: medium solid #336600;
    position: relative;
Amend the css for FBlogo to as below:
#FBlogo {
    position:absolute;
    left:700px;
    top:380px;
    width:91px;
    z-index:1;
    text-align: center;
Amend the css for bodytext as below:
.bodytext {
    font-family: Verdana, Arial, Helvetica, sans-serif;
    font-size: 11px;
    line-height: 13px;
    margin: 0;
    padding: 0;

Image Fade Out/Load new Image/Fade In

I think I am having an event timing issue. My desire is to
change the "header" image on each selection of a tabNavigator. I
can swap the image without issue through a img.load process. I
placed the image on a canvas and set the "showEffect" and
"hideEffect" on the canvasto fadeIn and fadeOut. (I actually have 2
images on the canvas) On the tabNavigator "change" event I call my
getImage() function and set canvs.visible=false, I have the tab
index for img.load=headerPic[idx] and then I set
canvs.visible=true; The result is that I do not get the first
visible change, I think. Tab 1 is initialized to visible in
ionComplete, clicking on tab 1 has no effect since it is selected
already. When tab 2 is selected the image changes to the new image
immediately and then fadesOut. Tab 3 then will fadeIn. Also
regardless of the tab selected, if I select another tab the ongoing
fade effect will continue on the newly selected tab. It seems the
load method doesn't care about effects - so I don't know how to
sequence these effects.
Thanks in advance.

"EWN-CMI" <[email protected]> wrote in
message
news:gk46uv$blo$[email protected]..
>I think I am having an event timing issue. My desire is
to change the
>"header"
> image on each selection of a tabNavigator. I can swap
the image without
> issue
> through a img.load process. I placed the image on a
canvas and set the
> "showEffect" and "hideEffect" on the canvasto fadeIn and
fadeOut. (I
> actually
> have 2 images on the canvas) On the tabNavigator
"change" event I call my
> getImage() function and set canvs.visible=false, I have
the tab index for
> img.load=headerPic[idx] and then I set
canvs.visible=true; The result is
> that
> I do not get the first visible change, I think. Tab 1 is
initialized to
> visible in ionComplete, clicking on tab 1 has no effect
since it is
> selected
> already. When tab 2 is selected the image changes to the
new image
> immediately
> and then fadesOut. Tab 3 then will fadeIn. Also
regardless of the tab
> selected, if I select another tab the ongoing fade
effect will continue on
> the
> newly selected tab. It seems the load method doesn't
care about effects -
> so I
> don't know how to sequence these effects.
You can use the completeEffect on Image to have an effect
every time an
image loads, such as you can see used here
http://examples.adobe.com/flex2/inproduct/sdk/photoviewer/PhotoViewer.html,
but I don't think there's a corresponding effect that you can
apply to the
old image before the change.
I think you're going to need to use ActionScript to get the
control over the
effects that you want, so you can call either the end() or
the reverse()
method on the effect when the graphic needs to change in
mid-effect.
HTH;
Amy

RH10 suddenly won't let me add/import new images into my project

I have tried accessing the "Insert Image" option using the various methods (menu, toolbar icon, right click menu), but once the dialog box is open, I click on the browse folder to find the image that I added via Explorer, but nothing happens and the app freezes. The only thing I am able to do is close RH via the Task Manager. I have tried rebooting and also tried doing this in multiple projects to make sure it's not my main project with the problem. This same thing happens every time.
I CAN add an image that has already been imported into the project... I tried doing that then using Image Properties to bring in the newly created image... same result... freezes the app. My project is only about 50MB in size... and I probably only have 2 or 3 dozen images in it so far.
I am hoping you are not going to say uninstall and re-install because I don't have the disc with me today... working from home.
Help please.

TOTAL weirdness... so I just got into work... turned on my laptop... so i'm not working remotely... opened my project... at first i got this error:
then i continued to get a series of errors of various kinds.. finally one telling me the cpd file was corrupt... now mind you... I had to restart RH several times yesterday... also did a reboot... and didn't get any of these errors...I also tried to import an image into an older project to see if it was the project or RH.. but i had the same problem with the other project - no.. didn't try a NEW project as I was planning at your suggestion because it's working in my existing project now.
so i deleted the cpd... opened the project.. and tried to import a new image.. and BAM.. it worked like always! WHAT'S UP WITH THAT?
I don't understand what the problem could have been if this wasn't working even without VPN...
Thoughts? I'd like to avoid this issue next time I'm working from home.. which will be next week!

MDT Capturing an new image after deployment

Hi
I have captured a reference image and deployed it. I edited the custom.ini file and bootstrap to have practically zero touch deployment. I did find that I had to connect to the mdt server and run litetouch.vbs to capture the image from the reference
machine. My question is once the deployment was done I wanted to capture a new image from a new reference machine and wasn't able to do it when running litetouch.vbs. It would through out an error of cant find ini. I uninstalled mdt and reinstalled it with
adk and can now capture again. Is there another way? I don't want to have to uninstall mdt each time. Is this because I edited the custom.ini file ?
Thanks

Hi Bronty12,
Base on my experience, your issue may caused by need to clean MDT, please refer the following thread solution first and there have a specific form to support the MDT issue,
you can ask in that forum there will more MDT expert to support you.
Dirty Environment found
https://social.technet.microsoft.com/Forums/en-US/36ed037b-51b1-4053-a248-46bd3ac9ecda/dirty-environment-found
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am new to Mac and am having trouble with uploading images from my pictures folder to Facebook and other share sites- some of my images are accessible while others are seemingly locked....

I am new to Mac and am having trouble up loafing images from my pictures folder to photography sites and Facebook. Some of the saved images are accessible, while others are not, ( they are light colored and cannot be uploaded) I am not saving them any differently.

Hi Robodisko,
Thanks for your prompt reply......
I often proof my work in preview then edit images in photoshop and rename from there. The dsc images are renamed to correlate the name of the class etc. i.e. dcs_001 is saved as the file name required 7A.jpeg etc.
The file names are required to correlate what is what and so on..........

The mall grid button in the upper-right corner of the page that toggles the images on and off in a new tab is missing how do I get it back?

I had a problem with some malware/adware by the time I got it removed it had altered much of Firefox.
I have managed to correct everything apart from the thumb nails of frequently used sites on a new tab. I know there should be a 3 x 3 grid in the top right corner but it doesn't show. How do I get it back, please?

You can reset the <b>browser.newtab.url</b> via the right-click context menu to the default value (about:newtab) to get the new tab page with the thumbnails.
*http://kb.mozillazine.org/about:config
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Create URL for image content and display in new window

Hi,
I am attaching a new image and it is displayed in a table view.
I am having problems creating the URL for the image.
When i give the link of external site like http://www.google.com, it works fine. It does not work when i give as www.google.com.
It does not work for the image. Please help.
ls_properties-name         = 'KW_RELATIVE_URL'.
ls_properties-value        = lv_imgname.
APPEND ls_properties TO lt_properties.
ls_properties-name         = 'LANGUAGE'.
ls_properties-value        = sy-langu.
APPEND ls_properties TO lt_properties.
Assign file properties
ls_file_access_info-binary_flg = 'X'.
ls_file_access_info-file_name = lv_imgname.
ls_file_access_info-mimetype   = 'image/pjpeg'.
ls_file_access_info-property   = lv_string2.
APPEND ls_file_access_info TO lt_file_access_info.
Move content to file_content
lv_str = lv_img_content.
lv_strlen   = XSTRLEN( lv_str ).
lv_offset   = 1022.
lv_bytes_rd = 0.
lv_bytes_rm = lv_strlen.
ASSIGN lv_str TO <fs>.
WHILE lv_bytes_rd LT lv_strlen.
    IF lv_bytes_rm LT lv_offset.
      ls_content-line = <fs>+lv_bytes_rd(lv_bytes_rm).
    ELSE.
      ls_content-line = <fs>+lv_bytes_rd(lv_offset).
    ENDIF.
    APPEND ls_content TO lt_content.
    lv_bytes_rd = lv_bytes_rd + lv_offset.
    lv_bytes_rm = lv_strlen - lv_bytes_rd.
    CLEAR ls_content.
ENDWHILE.
Create a Document using class CL_CRM_DOCUMENTS
CALL METHOD cl_crm_documents=>create_with_table
    EXPORTING
      business_object     = ls_business_object
      properties          = lt_properties
      file_access_info    = lt_file_access_info
      file_content_binary = lt_content
      raw_mode            = 'X'
    IMPORTING
      loio                = ls_loio
      phio                = ls_phio
      error               = ls_error.
Using the logical and physical id's, get the file location as an URL
data:
lv_no type char1 value '1'.
    CALL METHOD cl_crm_documents=>get_with_url
      EXPORTING
        loio     = ls_loio
        phio     = ls_phio
        url_type = '2'
      IMPORTING
        error    = ls_error
        url      = lv_url1.
should i prefix the url with 'javascript:'?
Thanks in advance.
Regards
Shanthi

Hi Shanti,
The URLs that are external to the server, you should always have http://, your image URL is has http:// prefix? Other wise system will always look for the same inside the current BSP application. For Example your BSP application is ZBSP and if you are accessing www.google.com the URL in the browser will be
*******/bsp/ZBSP/www.google.com which will not be existing, hence causing the problem.
If not try adding http:// to the URL by concatenation and try.
Regards,
Ravi

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

How do I stop finder from opening a new window every time I download an image (drag and drop)?

Before I updated my computer I could drag and drop a new image from the internet to wherever I wanted on the desktop. Now when I download a new image from the internet it opens the "Desktop" finder windo. Also it systematically downloads the new image to be placed underneath the last downloaded/organized file. How do I stop it from doing both of these things?

Try relaunching the Finder > Relaunch Finder… from the Mac OS X Finder

I'm new to Apple and have a new Ipad. I can't view some images because I need a flash plugin like addobe. What App do I need?

I'm new to Apple and have a new Ipad2. I cann't view images that need a flash plug in like Addobe. What app do I need?
D

Flash is not supported on the iPad, and probably never will be as Apple don't want it, and Adobe have never managed to create a version of their flash player that works on iOS devices - and Adobe have recently announced that they are stopping development on all mobile versions of it.
Browser apps such as Skyfire, iSwifter Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, and there is the built-in YouTube app.

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

New Images and Flash Content won't display

Working in Dreamweaver MX.
Updating some content to existing pages with flash swf files
and jpegs in them. All of the old content works fine, but when I
replace old swf files with new, or add any new jpg files. I get a
broken link image in the browser, or nothing at all. All of the
file paths appear to be correct. The flash swf files test fine in
the browser before I add them to the page in Dreamweaver. New text
content and the layout are updating fine, the jpegs and swf files
are just not showing up, its as if the files did not exist in the
site.
I have been struggling with this for several days and tried
many different ways of finding the problem, but no success this is
turrning into a nightmare.
Please help- anyone.

Post a link to the pages, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jchurchsf" <[email protected]> wrote in
message
news:ervm8j$fu1$[email protected]..
>
> Working in Dreamweaver MX.
> Updating some content to existing pages with flash swf
files and jpegs in
> them. All of the old content works fine, but when I
replace old swf files
> with
> new, or add any new jpg files. I get a broken link image
in the browser,
> or
> nothing at all. All of the file paths appear to be
correct. The flash swf
> files
> test fine in the browser before I add them to the page
in Dreamweaver. New
> text
> content and the layout are updating fine, the jpegs and
swf files are just
> not
> showing up, its as if the files did not exist in the
site.
> I have been struggling with this for several days and
tried many different
> ways of finding the problem, but no success this is
turrning into a
> nightmare.
> Please help- anyone.
>

New Image Deployment and Customization

Similar Messages

Maybe you are looking for