NEW & IMPROVED! Export Via Compressor

I just noticed that Export via Compressor no longer ties up FCP! Once you submit your batch, you're free to go back into FCP, close that project and open another and work.
Sweetness.
I'm on 5.1.4, not sure when this was implemented.

EDIT, FALSE ALARM.
I just realized after I posted the topic that I had added a surround sound group to my batch before submitting it. When I looked at the monitor, it was working on the surround sound group. Once it hit the stuff off the timeline, it grabbed FCP again, so, false alarm.

Similar Messages

Exporting via Compressor - submit - failed

When I use Export via Compressor - and I use QT Pro Res - and destination is Movies Folder, then submit - then in the History window it has returned "Failed" 3 times now. The status bar shows, but never any indication that it even starts to work its magic or anything - just after a few seconds, maybe a minute, the word Failed appears. Argh. The motn project is 5 minutes long full of stills and a little video with audio. Help - what am I doing wrong?
In looking thru this forum, I thot the best export would be QT ProRes - is that causing the failure?
I previously exported via QT(not compressor) and the resulting file is 10gb which doesn't run smoothly but jerks and hiccups like a pre-rendered file. And 10gb wont fit onto DVD which is where this project will go - as a gift.
help

I surely do not take it personal. I have learned that you folks in this group are the best resource I have. I know I am in way over my head. I truly do not know about codecs.
I have taken Motion directly in to FCP - but I didn't think it would work this time. I should have tried.
Someone came along at work and told me to use Visual Hub and use setting for mp4, and also try using the DV - ready for FCP - I did both. I really never think of it as wasted effort if I can learn by what I doing, and that is occurring as you are all explaining to me what I should be doing.
Now as for workflow - I think I did the right thing by starting with Motion, then with the big file sizes went to Visual Hub - but probably could have just gone to opening the Motion files in FCP - then rendering out for DVSP.
System settings are a boggle to me - so I just use NTSC - DV 720x480 and hope that works - so far the results in my projects are good.
Again, Thank you for taking time to explain - I appreciate all comments.

Fragmented movement upon exporting via Compressor

I'm doing an animation project in Motion 3. When I try to export using Compressor there are artifacts all over the place. The animation is of 9 birds created with replicator flying across the screen. I created a single bird flying from photoshop files. I made a quicktime movie of the single bird, imported it into a new file. I used the movie of this bird to replicate and make the group fly across the screen. When I look at the group with RAM preview in Motion all looks well. When I export them with compressor, everything goes haywire and they don't fly right. Their wings become fragmented. I'm not sure how to attach the files to this post, but if it is possible I could send them and maybe someone could tell me what's going on. The file is 960 x 540 at 23.98 fps. I tried exporting using both the animation codec and the ProRes codec, but had the same problem in both.
I'm working on a MacPro Quad-Core with 26 GB of Ram. NVIDIA GeForce 8800 GT. I just got this computer, but I had the same problem on my old computer. I thought the old computer was too dated and maybe that is why it was happening, but that doesn't seem to be the problem. BTW, also had the same problem in Motion 2.
I sure hope someone can shed some light on this. I'm guessing I might have something set up wrong.
Thanks, Ellen

hi moonduck
can't solve the problem, but might have a work around. i often have problems with using compressor via motion. But all problems disappear if I drag the motion project into fcp and export through compressor from there.
hth
adam

Severe anti-aliasing when exporting via compressor

Hello all, can't seem to find anything to answer this in a search, so any help would be much appreciated.
I seem to be getting severe anti-aliasing whenever I export anything from FCP to compressor. At first I thought the problem was with compressor, because everything looks and exports directly from FCP perfectly. But if I open compressor and import/open the exact same movie directly, compressor seems to do its job as expected, so I'm pretty sure I've narrowed it down to when I export something 'using compressor'
I've tried various different codecs and sequence settings including totally 100% uncompressed, I've also tried upping the bit rate and everything still comes out looking exactly the same.
I have a feeling I've accidentally changed some setting(s) somewhere (although I can't think where or how) because until a few weeks ago, everything worked just fine.
I think I'm going to have to re-install everything, which I'd obviously like to avoid, so if anyone has any advice or suggestions I'd be very grateful.
Thanks in advance.

The anti-aliasing preference setting in both Illustrator and Acrobat is just a preview on screen.
If you're going to print it preserving the jagged nature you could apply Effect > Rasterize with appropriate settings in Illustrator, for example.

Export via Compressor

Hello
I just finish making my video in FCP X, i would like to export it now using compressor, i prefer to not lose much uality, and i want to export it to .m2ts file (AVCHD) but i have no idea how?
(video is about 18min long, 10-15GB size is ok)
I want the video to be in 50fps, what im doing is, i choose a "H.264 For BluRay" preset in Compressor, then i change the BluRay to AVCHD, but then its impossible to change any of the preset settings, like audio, fps and so on.
Could anyone post a screenshot of good settings?
Thank you

You can set MPEG-4 up to 59.94, including 50fps.
I didn't adjust it all. You might want to push the bit rate a little higher.

Export as QT or via compressor

Hi everyone,
Sorry for cross posting, but I've had no replies on the DVD SP forum.
I'm editing in FCP and making a menued SD DVD. I've had success in laying out the DVD project.
The source material is low quality and duration overall a few minutes. I'm adding a few supers to the clips.
My question is, will I get better result exporting via compressor or via a QT export (using current settings PAL 25FPS 16:9)?
Thanks in advance.
Steve

You know, I've found all the functionality of compressor in dvdsp-- it's just that you have to drill really deeply into the settings to get there.
Not saying use DVDSP necessarily, but the functionality is there.
EDIT forgot to add that exporting FCP directly to compreessor is a really time consuming process and locks up both applications. Best to export a self-contained movie, do NOT recompress all frames. That way you're just copying your sequence.
Message was edited by: Jim Cookman

Export via Motion or Compressor?

I have a 2-minute motion graphics video that I put together in Motion 3. I want to export it for the web (YouTube, etc.) and so I'm using H.264. Assuming I'm not getting into Compressor's fancy batching / clustering features, are there any advantages to exporting via Compressor as opposed to direct from Motion?
Thanks,
Scott

You haven't said if the original video you imported into Motion is MP4 or H.264 or some other highly compressed media. It won't matter what you export if those "damaged" frames are in the original (and mp4/h.264/etc are prone to bad frames at the very beginning and very end depending on how they were prep'd for delivery).
You should (I'd say always, except I'd be a hypocrite) transcode original media into ProRes (any flavor) before importing into Motion. Check frame by frame if you have to to see if there's any damaged frames (usually there won't be.) I'd highly recommend using Quicktime 7 Pro (it's still available from apple's online store at apple.com) to transcode your video. Others might recommend MPEGStreamclip (but I just can't); or if you have it: Compressor.
If you have Final Cut Pro X, you'd be better off editing video in that app. You should be designing your Motion "add-ons" as effects, titles, transitions or generators for use in FCPX and leaving the video completely out of Motion. FCPX also takes care of transcoding to prores for you (opt to Transcode Optimized Media when importing.)
PS - you'll get better performance out of Motion if you use ProRes video. (Same goes for AIFF/WAV audio and NOT mp3.)
Hope this helps... otherwise I don't know what the problem would be.

Export Sequence via Compressor

Hello,
When I do File->Export->Export via Compressor and once my sequence is in compressor and I make some custom settings for compressing, my FCP doesn't respond anymore (visible in force to quite). I can't manage to get a job going since every time it does that.
What can I do ?
Thanks for reading !

Napoléon23 wrote:
Yes I know but if one has to always export via QuickTime movie before putting the movie in Compressor he looses time compared to going directly to Compressor.
Well, not necessarily. Compressor operates much slower when you export directly from FCP and you cannot make use of Qmaster to speed it up.
http://www.digitalrebellion.com/blog/posts/usingcompressor_with_multiplecores.html
If your timeline is fully or partially rendered and you export a reference movie (i.e. deselect the "self-contained" option), you should experience a significantly faster export from FCP.

DVD Studio Pro not playing back audio of asset converted from FCP via compressor.

I exported project via compressor:
File Extension: m2v
Estimated file size: 4.34 GB
Video Encoder
    Format: M2V
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV
    Crop: None
    Frame rate: 29.97
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 3.6 (Mbps)
    2 Pass VBR enabled
        Maximum data rate: 7.5 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 15, Structure: IBBP
    DVD Studio Pro meta-data enabled
This took about 7.5 hours. I exported the audio separately as AC3. Finder plays it sound & pictures. Quicktime plays the video. DVD Studio Pro, when I drag the assets (video, audio) to the timeline editor, so I can play it in the viewer, it plays the audio the video is black. No setting in view or any other setting will get it to play the video. This project is due to ship today and I don't want to re import it if I don't have to.
I exported this project before the MPEG2 export as a Qicktime with .mov suffix. This plays alright, but there is artifacting around motion. I think this is due to low VBR, but don't know. Can ayone help?
Dix Moser
[email protected]
FCP Studio
PowerMac 1.8G 3G mem 250G HD
750 G ext. Firewire drive (where media is stored)

If I may chime in...
I'm a little confused on the "what plays what" part, but all that really matters is what DVDSP sees/plays.
I've worked on a system like yours and what I'd recommend is:
1. NEVER export via Compressor. It's just ungodly slow on anything less than a Quad. Export a self contained QuickTime Movie using the first export option and use that to feed Compressor.
2. Segment your output into manageable clips (I like 15-20 minutes) both to perfect the encoding and so you aren't re-encoding the whole show if something goes sour. It will all play fine as long as it's all in the same DVDSP timeline.
From what you describe, I'm thinking you're on an early version of Compressor that had A-Pack as the AC-3 encoder. This is no biggie, I mention it mostly to verify. Early Compressor was good too.
Make maybe a 5 minute piece to tune up. Just export as normal, then into Compressor. Your encoding values seem about right. Get the AV pair into DVDSP and it should play. I'm guessing that part of your problem is that the processor is fighting to handle the project size. Build the test clip project and look at it in DVD Player to view what would have been burned. If all looks OK, go for it. If not, bring back the results for discussion. This should be a snap, it's just a really big project. Keep your head up, I had a friend do a 225-minute disk on his G5...

FCP export using compressor

does anybody know where the jobs compressor submits get stored?
I can't export via compressor out of FCP 6.1, (FCP quits responding) but if I export a quicktime then get that in compressor using a quemaster quick cluster, it rocks along fine until I forget I can't export out of FCP, or a freelancer does it and resources get stupid until the job finally finishes. cancelling won't fix it, quitting, shutting down none of it stops the job. If I could find where the job is stored I could trash it and work could renew. Thankyou

duh
users/library/aapplication support/compressor/history
fixed it. now if only I didn't have to worry about export using compressor from FCP 6.1 Studio2. wouldn't that be something? if it really worked? wow that'd be cool

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
https://discussions.apple.com/docs/DOC-2491
MtD

Exporting Multitrack Via Compressor to AC3 5.1

Hi all.
I've been trying to export separate tracks from STPro via Compressor to create a 5.1 AC3 file to use as audio for a DVD. I've been told it's 'as easy as it gets' but i'm not having much luck...
I only want simple spot FX, using the video preview to time them.
However, when I export and make a DVD (and rush home after work to test it) all sounds are dead centre. My DVD Player says t's a Dolby Digital sound alright - but mono.
I've been exporting the tracks to different outputs, thinking they would go to each channel in turn. What am I doing wrong?
Or is there a better way - perhaps in DVD Studio Pro - using seperated mono files...?
Thanks in advance, especially to the following post...

Hi,
I did a quick check on my PB (Standard stereo output) and it seems that you cannot export it this way, since you can only assign 1 or 2 to the various outputs and the channel layout only takes a look at this. If you have an output unit that supports more than two channels it would work.
Another albeit more cumbersome workflow:
- Put each channel in a seperate track and do the mixing.
- Mark the tracks you want to export
- Go to File->Export and choose "Export Selected Tracks"
- Specify where you want to save the files
- After exporting the files open up compressor and select File->Import Surround Sound Group
- Put the saved files in the correct channels
- Convert it to AC3 5.1
I have not found an easier way to create 5.1 files without 5.1 hardware support, hopefully future versions of STP will take care of that.
/Mike
Message was edited by: Michael Guntsche

Export to AppleTV via Compressor, Chapter Markers Wrong

I'm exporting various projects out to AppleTV via Compressor with Chapter Markers. Works great except for the Chapter Markers, which are out of sync...significantly, by 30 seconds or so. Any ideas on what the problem might be or how to ensure Chapter Markers will transfer over to the AppleTV setting in compressor?

Matt Martin1 wrote:
I'm exporting various projects out to AppleTV via Compressor with Chapter Markers. Works great except for the Chapter Markers, which are out of sync...significantly, by 30 seconds or so. Any ideas on what the problem might be or how to ensure Chapter Markers will transfer over to the AppleTV setting in compressor?
So this is a Compressor-specific issue, right?
What I mean to say is, if you're exporting QT movies out of FCP, those do not exhibit the shift in chapter markers, correct? Just trying to determine if FCP/QT is the culprit here.
Or are you exporting directly to Compressor? Or adding the chapter markers directly in Compressor?

Quality differences between "Export Using Compressor..." and Drag & Drop

There are quite a few people out there discussing the 24p workflow for the new Canon HV20 (on hv20.com, dvinfo.net, etc.). The HV20 can shoot 24 progressive frames/sec, but stores them as 29.97 interlaced HDV on tape, with an arbitrary cadence.
One of the better workflows is to capture into FCP using HDV over Firewire, and use Compressor to extract the progressive frames from the interlaced. Its Reverse Telecine seems to automatically figure out the cadence. I've been testing this using the "Other Workflows > Apple Codecs > Apple ProRes 422 for Progressive material (HQ)" preset, with the following modifications, Frame Controls: On, Deinterlace: Reverse Telecine, Frame Size: 1920x1080.
That's just background.
The problem is this. If I export the HDV clip from FCP, "Export > Using Compressor...", the resulting 24p footage is extremely high quality. However, if I drag & drop the HDV clip directly into Compressor, or set up a Compressor droplet (arguably more straightforward for batch conversions), the resulting footage has obvious resizing artifacts (jaggies).
Obviously, I'm keeping everything consistent setting-wise, and have thoroughly examined the resulting .movs. The only difference is the actual image quality.
Anyone seen anything like this?
I'm less concerned about this specific workflow than I am about Compressor producing non-identical results from identical footage with the same settings, dependent on your chosen workflow...
Mac OS X (10.4.10)

What I need to know if it is a dramatic different in quality that I should use DVD Pro instead of iDVD.
If you want a DRAMATIC improvement in quality, shoot sharp, high quality content like Hollywood (usually on film) and have it compressed by high quality hardware encoders.
There is a good reason Hollywood DVDs look better than iDVD/DVD Studio Pro DVDs.
F Shippey

How can I export via QuickTime in iMovie '13 (10.0)?

Prior versions of iMovie had an export via QuickTime option, which allowed me to select the file format, encoding settings, etc. After upgrading to the new iMovie, that appears to have gone away. The Share -> File option does not allow me that level of control over the output file. Has that functionality been removed from iMovie?

I'm also having trouble with this. The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings to export the video in any other format that wouldn't cut out the picture. Basically, the only settings I've found in the share option of the iMovie 10.0 cu off the tops and bottoms of all my recording. Previously, I used QuickTime settings to pick what format and quality I wanted to export in. Does anyone have any insight about how to export using, say, a 640 x 480 format or in being able to adjust to any format other than the standard ones giving.
Is there any other video software I can be using to import and export with that gives me more functionality?

NEW & IMPROVED! Export Via Compressor

Similar Messages

Maybe you are looking for