New Info Block

Hi Fellows,
I need to create one new Info Block in CRM with FI/AR informations.
How I do this?
Thanks,
Luiz Schumann

Does anybody has developed a new infoblock in CRM, with different fields from standard infoblocks?

Similar Messages

  • Create New Info Block in ECC for CRM Customer Fact Sheet

    Hi,
    we have a requirement to add a new info block in Customer Fact Sheet to display Equipment master from ECC. the info block required somehow is not listed in standard ECC info block.
    is there any way i can configure the info block in ECC so i can call it from CRM? or do i need to develop it using ABAP in ECC?
    thanks in advance

    What I really really need is an example of how a new Assignment block can be created so that it appears in the PDF fact sheet.
    I'm aware that the interface within the Smartform will need to be changed, along with the coding to process any new data being parsed in. The copied class, now called ZCL_UIU_PRN_ACCOUNT has a method called Collect_data which populates the itabs and forwards to the appropriate Smartform. I'm currently looking through this code to see what needs to be done.
    The collect_data method loops through the data in the CRMT_BSP_PRINT table and retrieves the data structure and class, and I assume it calls them, but I have no idea what these classes have in common as I can't see common theme with them.
    The data sources are:
    CRMT_BSP_ACTIVITY2_BP
    COMT_BSP_BP_ADDRESS
    CRMT_BSP_CONTACT_OBJ_BP
    CRMT_BSP_INT_HISTORY_BP
    CRMT_BSP_OPPORTUNITY_BP
    CRMT_BSP_ACC_R3_FACT_SHEET
    CRMT_BSP_ACC_RELATION
    CRMT_BSP_SALES_AREA_BP
    and their associated class/interface is:
    CL_BSP_ACC_ACCMOD_ACTIVITY
    CL_BSP_BP_ACCMOD_ADDR_MIX
    CL_BSP_ACC_ACCMOD_CONTACT
    CL_BSP_ACC_ACCMOD_INT_HISTORY
    CL_BSP_ACC_ACCMOD_OPPORTUNITY
    CL_BSP_ACC_ACCMOD_PRN_R3DATA
    CL_BSP_ACC_ACCMOD_RELATIONS
    CL_BSP_ACC_ACCMOD_SALES_AREA
    It would look like a lot of these classes are based on CL_BSP_*ACCMOD classes, but that's guesswork on my part.
    I am unhappy that I seem to be pioneering here as there's no guide/help on exactly what needs to be done to add new AB's/sections to the PDF fact sheet. I find that strange as most areas are well documented, except this area as far as I know.
    Sure, there is a note which identifies some of the objects that need to be changed, but misses out a vital table, but there are no guides. There are many people who produce videos on how to achieve the easier stuff, like adding fields to AB's via the UI configurator, but there seems to nothing in the area of extending the PDF fact sheet.
    Jas
    Edited by: Jason Stratham on Apr 29, 2010 10:22 AM

  • New Info Block in BP Fact Sheet

    Hi Experts,
    How i can add new Info Block to Business Partner Fact Sheet (BP_FACTSHEET) with other class and all data.
    I will write some ABAP program with data but how i can assing it to new info block?
    Any ideas?
    Thanks to all

    Hi,
    Create the fact sheet views that you want to include in the component workbench.
    Under UI framework def>factsheet> assign these views to a fact sheet.
    Then these views are then displayed in Available Fact Sheet Views in the fact sheet configuration using bsp_dlc_fs component within the component workbench.
    Select the created view as one of the tile in factsheet.
    Hope this helps
    Srinivas

  • Add new info block in Tcode VC/2

    Hello All,
    Could someone guide me how to add new intoblock in tcode VC/2.
    Currently SAP provide 22 info blocks. I need to add new infoblock
    This is what I do.
    Go to tcode VC/2 enter information and execute . Click on infoblock this will give list of available infoblocks. Please let me know can we modify these infoblock . or can we add new.
    Regards,
    Vinod Gilbert

    Hi,
    Create the fact sheet views that you want to include in the component workbench.
    Under UI framework def>factsheet> assign these views to a fact sheet.
    Then these views are then displayed in Available Fact Sheet Views in the fact sheet configuration using bsp_dlc_fs component within the component workbench.
    Select the created view as one of the tile in factsheet.
    Hope this helps
    Srinivas

  • Steps to create info Block

    Dear All,
    Anyone can tell me what are the steps to create info block and assign it to users.
    Regards,
    Ashima

    Hi ,
    How to create a new info block from sale summary and how to assign this new info block to a user.
    Regards,
    Ashima

  • Adding new info object to a cube.

    Hi Friends,
    This is a BI SYSTEM, we have a cube with existing data in it. Now we need to add a new info object to the dimension of the cube.
    Now we can add the info object to the cube in 2 ways.
    1. remodeling the cube
    2. select the cube in RSA1 , RIGHT CLICK, IN CHANGE MODE add the info object to the dimension of the cube.
    now my question is why we have the concept of remodeling, when we were able to add the info objects to the dimensions of the cube in the change mode.
    kindly explain me in detail.
    thanks.
    Please search the forum
    Edited by: Pravender on Mar 16, 2011 2:58 PM

    Hi Soumya,
    If you go by option 2 of adding Infoobject in Cube by going in change mode and adding the respective Infoobject in Dimension,
    Then you have to delete Data first from the Infocube in order to add infoobject by this option. Otherwise it won't allow you to add infoobject.
    But by remodelling option you can add the infoobject in dimension without deleting any data from Cube. But this option has its own limitations too.
    Please refer the following link for Remodelling Concept:-
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
    Hope it helps.
    Regards,
    Hardik

  • When I open a saved document in pages, then close it right away without making any changes, why does it ask if I would like to save the page or all new info will be lost?

    I have a few saved documents and when I open them to view them quick, sometimes when I close it, I will get asked if I would like to save the document or all my new info will be lost. I didnt change anything so Im not sure why it asks me that. When I open the document again, all the info is there and nothing is different. Thanks

    Unless they were Word documents, Pages has done nothing really, but it is updating date information in the file.
    It is annoying but just ignore it and don't save.
    Peter

  • I recently bought my daughter an iPod 5th generation and quickly set it up with all my info ... E-mail , Apple ID etc. how can I change all of it to her name and new info without losing all her apps , movies and music ???

    I quickly set up my daughters iPod with all my info ( e-mail , Apple ID and password ) how cam I change it all to new info under her name so she can have for her own ??

    You will need to Erase the Device and Set up as New using her Apple ID.
    Then... Sync her content...
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    Note:
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • JUST ADDED NEW INFO TO THREAD: Anyone know why publishing my demo hangs here: CustomTransiton_1.swf?

    NEW INFO:
    I've been testing to see which slides are bad, by publishing with certain slides hidden, to isolate the problem. It turns out there are at least two bad slides - but only one has full motion recording on it. Guess that really blows my theory . Any thoughts??
    Hi,
    I've been working on a demo and cannot publish it. In the publishing progress bar, it hangs when it says this: "Writing SWF File Tags to Stream" (this slide happens to have a full motion recording on it btw, but I don't know if that's significant info. because other slides do too, and those function just fine).
    When our desktop support team looked at some event log, it looked to them like it kept hanging on a file called "CustomTransition_1.swf". What in the world would that be? I thought I had a good theory regarding full motion recording being a problem (other sims. without this publish just fine), but then again- one of the slides with full motion really isn't problematic!
    Anyone have some good experience or advice with this?
    Thanks,
    Dee

    I have absolutely no idea what that is, but recently I was encountering a ton of publishing problems and they all seemed to go away when I downloaded this patch. Don't know if it will help you, but it's worth a shot...
    http://www.adobe.com/support/captivate/downloads.html

  • Adding a New Assignment Block

    Hello Experts,
    I need to add/create a new assignment block 'Strategy Plan ' similar to existing assignment block 'Attachment'
    in Account screen.
    I got the document which suggest creation of new assignment block by creating Set Type and attribute.
    But can't figure out how to make that assignment block similar to  existing one 'Attachment'.
    Please help me how to proceed .
    Thanks in Advance,
    Ram

    Hi Arun,
    I did exactly how you said.
    Opened the Component BP_HEAD in Enhancement set 'Z_ENHANCE'.
    Added the component usage 'ZStrategy' their inbound plugs and outbound plugs
    similar to one used by Attachment assignment block.
    Added the View 'ZStrategy.MainWindow' under viewarea 'OverviewPage'
    of ViewSet 'BP_HEAD/BPHEADOverveiw'.
    Also Initialized the component usage in WD_USAGE_INITIALIZE of component controller.
    But When I see the assignment block in WebUI.
    I see simple window with no toolbars in it. Also It disapears when expanded.
    I gives error like "CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZStrategy'
    CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZPlanStrategy' "
    I think I missed some steps or may be my enhancement set is not loading.
    Help me out.
    Thanks and Regards,
    Ram

  • Adding new assignment block in the sales order component

    Hi ,
    In sales order ,  qty filed is available at line item general details  level .now my requirment, the qty field has to display  in the new assinment block. i am thinking to create new view and context  node in the same component and ii will add this view to SOItemOV page . Please guide me this  approach is correct or not.

    Dear Venky,
    Refer to this [WIKI|http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock] for help.
    Thanks
    Vishal

  • Sync performed on new iphone 4, and all my new info (contacts, pics, etc.) GONE!  It went back to my old iphone info....  how do I get my iphone 4 info back!!??

    sync performed on new iPhone 4, and ALL my new info (contacts, pics, etc)  GONE!!  It went back to my old iPhone info... how do I get my iPhone 4 info back??  The look and everything about the phone is like I have the older version!!!  I'm sure the data was backed up... but where, and how do I retrieve!!???

    If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
    http://www.wideanglesoftware.com/touchcopy/index.php

  • How to add new assignment block in opportunity

    Hi,Experts.
    I'm a beginer of SAP CRM.
    I need to add/create a new assignment block similar to existing assignment block 'Details'
    and display enhancement items in Opportunity screen with SAP crm 2007.
    I have created new view using Wizard in BSP_WD_CMPWB and  added it in WebUI.
    I can input the item of added assignment block when creating new transaction.
    However updating the existing one, the item does not replaced by input mode
    even if I push the EDIT button.
    Is any coding necessary? My process was wrong?
    Could you please help me out.
    Thanks,

    Hi ,
    For your issue , in the view/viewset impl class where the edit button is placed , redefine the method SET_VIEW_GROUP_CONTEXT and create an instance
      IF iv_first_time EQ abap_true AND view_group_context IS INITIAL.
        IF iv_parent_context IS INITIAL.
          CREATE OBJECT view_group_context
            TYPE
              cl_bsp_wd_view_group_context.
        ELSE.
          view_group_context ?= iv_parent_context.
        ENDIF.
      ENDIF.
    Then in the event handler of the edit button make the view editable
    me->view_group_context->set_all_editable( ).
    Then in the .htm of the view , in the chtmlb tag ,
    displayMode = "<%= controller->view_group_context->is_view_in_display_mode( controller )
    Please try this..This will work.. If so, plz award points

  • How can the info block be assigned with the view and assign view to users.

    Dear Friends,
    Anyone could plz tell me how can the info block be assigned with the view and assign view to users.  Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
    Regards,
    Ashima

    Hi,
    To define view and to make it default
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
    To assign default user to the view.
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
    To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

  • Info block view in sale summary

    Dear All,
    when we display sale summary in a Sale order, there is something called "Info block view" (such as address..).
    So how and where we can difine or customize it?
    thanks,
    James

    Hi all,
    please do give some suggestions.
    thanks to all.

Maybe you are looking for