New ink cartridge is not being recognized
I just installed a new ink cartridge in my np officejet pro L7580. All the ink works great except the black.
Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...
Similar Messages
-
Brand new iPod Touch is not being recognized by my computer
Hello,
I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...
-
PRO8600 Not recognizing new ink cartridge
I just changed the cyan cartridge in my Pro8600 printer, as I have previously done with no problem. However, the printer is not recognizing that the new cartridge has been installed. After closing the door and allowing the machine to cycle through its initial process, the window again appears stating that the cyan ink is empty and must be replaced to continue printing. I've removed the cartridge and reinserted it several times to no avail. I've also tried a second new cartridge, again with same results. Any ideas?
Hello bryantk37127,
Welcome to the HP Forums.
I see that you are having an issue with the ink cartridges not being recognized in the printer.
I do have a few suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with this issue as well as other errors. Please click on the following link for when An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p
my eprinter will not print in proper in colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini
I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777 -
HP Officejet Pro 8500 A910 - all new ink cartridges, black and blue ink not printing?
HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
Cleaned printer heads w/no luck.Welcome to the forums @corAtrum1 ,
I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
I hope this helps!
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
why cant i sync my devices with this new version of iTunes? my devices are suddenly not being recognized. HELP!
Connect your iPod, iPhone, or iPad to your computer and select your device.
-
Brand new ink cartridges, cleaned, still not printing
Recurring problem on this printer, nothing helps. Brand new ink cartridges, cleaned the inkheads twice, read though solutions for de-clogging the vents. Able to print documents fine this morning, now---nothing. Black ink not printing. Frustrating, this is a recurring problem and am tired of going through more ink. Ran alignment, just says "alignment failed" but no solutions offered/no troubleshooting given. Suggestions?
Hi @OL5,
Welcome to the HP Forums!
I see that your HP Photosmart is not printing black. I am sorry to hear this, but happy to help!
For further assistance, I will need to know:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If the printer is connected, Wireless, or USB.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using genuine HP ink cartridges, or refills.
Once I know this information, I will be happy to do some further research for you.
Thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
C7280 NEW INK CARTRIDGES NOT RECONIZED
I bought a pack of all new ink cartridges. I was only going to replace the ones that were empty but after I got errors saying that the dark blue was now too empty I decided to change them all to new. It still says that the dark blue is empty and the dark pink one went from almost empty to totally empty. It tells me on the main screen that I cannot print because the blue one is empty but not the pink one. BUt if I go to the ink levels it shows both are empty. All of them are new. I tried to do this reset solution that I found on another post that has to do with holding down the # and 6 and that didn't work at all. I do see that there is a little splash of blue around the blue cartridge. I seriously need to get the printer working because I have to print out shipping labels. Thanks to anyone that can help me out.
Hi dizdevil1
What results do you get when you check the ink levels?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00414934&cc=us&lc=en&dlc=en&product=447851&tmp_...
Have you contacted Phone Support about this yet?
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?
Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy -
Entourage 2008 not being recognized as installed after migration to new iMac Mountain Lion.
Hello Everyone!
I;ve been browsing for answers to my problems for 2 days now. Office 2008 is not being recognized as installed on my machine. i have 2011 but i prefer Entourage as my defailt email client.
What happens: when i try to access Entourage i get a getting started window asking me to either register my product or learn more. when i try installing the update 12.3.6 for Office 2008 it tells me it cannot be installed because the software componenet necessary for installation is not found on the disc. from this I gather the actual Office is not being recognized as installed.
What I tried so far: I did all that was suggested on forums, such as checking to see if the MS office 2008 is in Applications, nothing was changed like the name of software or location of any of its components, tried getting the latest updates for the MS office 2008, tried installing on another user, none of these worked.
I am still to try reinstalling but the disc i have is an upgrade from 2004 which will prob not work in this case, since anyway I understand that .dmg is not supported anymore.
What can I do? anything that doesn't require me to use 2011, i do not like the Outlook in 2011. is there a way to activate my install of 2008 and use that? i really like Entourage, Outlook doesn't satisfy me.
please helpReference your first post - I download and use dmg files, so either I'm lucky or they are supported.
I would try the disk reinstall since at this point there doesn't seem to be many options.
Do you have a backup? You could restore the Microsoft Office 2008 folder. -
Ipod touch not being recognized by itunes now
i have a friend who has an ipod touch....everything had been going fine for him and then all of a sudden it was not being recognized any more....what caused this? he did say that he had done an update but i'm not sure what version he has....could this possibly be the problem.....does anyone an a fix for this?
I think Apple is having a problem at the moment, my Ipod touch was always fine syncing until the new update! (Even on older itunes version, I could'nt sync since new update came out) It just isnt recognizing the device...
Ive done all that Apple says to do, none of which helps at all, I reckon its thier own side of the problem they need to fix... -
How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?
Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them. -
Video Ipod 80G 5th generation not being recognized by computer or itunes.
My ipod is not being recognized by my computer or itunes at all. I bought a new cable and nothing happens as well. however when i connect it in my car it works fine. did any resolve this issue? I am not sure if its the new software that has the issue but i am almost certain it is.
Many people are reporting problems with connecting there fifth-gen iPods after the update to iTunes 9. I had the same problem, and when I downgraded to iTunes 8, everything worked again.
I tried cables, resetting, and all the other steps. My solution turned out to be iTunes 9 itself.
My problem came from using a replacement hard drive-an adapter that allows me to retrofit my iPod with a Compact Flash card instead of a hard drive.
The problem is NOT the adapter. This system functioned perfectly until iTunes 9, and when I switched back to iTunes 8, it worked again.
Summary: I have a modded iPod, and it consistently works with iTunes 8, but not iTunes 9.
Reason: Apple is sooooooooooo afraid a Palm Pre user will be able to use iTunes that they are breaking the sync code on purpose.
Downgrading iTunes:
1. find the download of iTunes 8 for your OS. (not posting links, as they may change)
2. go into your iTunes 9, and export EVERY playlist to a text file. This is the only way to preserve your playlists.
3. Uninstall iTunes 9 from you computer, install iTunes 8.
4. Configure iTunes 8 to use your music folder (especially if you moved your music to a different location other than the default)
5. Add your music to iTunes-this may take awhile.
6. Import you text files and your playlists will return.
7. Backup your iTunes 8 library files.
Happily enjoy your modded iPod. Mac Users: Don't accidentally install iTunes 9 from an Apple Update.
Maybe you are looking for
-
ITunes slow to open on Windows 7 64 Bit
I have been having issues ever since iTunes 10.6.3 and iOS 5.1.1, when I go to desktop and hit my iTunes icon to open it it takes like up to 45 seconds before iTunes opens up on my computer. I have done everything known to correct it myself and nothi
-
HT1373 My ipod shuffle is no longer charging ?
My Ipod shuffle is not charging...what do I need to do to correct this?
-
AS is down and failing to connect: Getting the error below
I'm new to the Oracle AS environment. I'm also new to the Oracle technical support environment. I just encountered the error below and I'm researching the cause this problem. I was informed to come to this board to seek valuable knowlege, solutions a
-
Fluid Grid Layout - Please help
Hello, I would sure appreciate help asap! I have made a draft of a website and although I used the Fluid Grid layout I seem to be having issues. Layout is has header/nav, main, rightsidebar and footer. I do realize that I put a table into the header
-
My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to fix this? I would like to be able to see my photos again.