New install cant 'see' infoview etc when Tomcat starts as a windows service

Post Author: sdimb
CA Forum: Deployment
Help, we are a new site trying to install BOXI R2 SP2 on a windows server.  We have installed as per all instructions including Tomcat but when we try to 'use' Infoview we get a blank page.  If we stop Tomcat and restart it via the command prompt we can use Infoview but we need to have this working as a windows service.  We have tried re-installing several times and always get the same result.  does anyone have any ideas as to what we have done wrong please.

Post Author: mewdied
CA Forum: Deployment
Running tomcat as a service may be running under a different user context than when running it via the command prompt.  This may be causing your issue.

Similar Messages

  • Port blocked when Tomcat is made a windows service

    Hi All
    I have a web application which listens on some port for server response .That port gets blocked when Tomcat is made a windows service.But if i run tomcat normally this problem does not occure.So i am not getting what is exact problem?

    Huh?
    As a guess you mean that you when you run Tomcat the server port doesn't work.
    The difference is because in one case you are running as one user and in the other you are running as a different user. On windows you are probably running 'without' a user because you didn't explicitly set one up.
    The solution is to use an explicit user. That is also the way you should test. Log in as that user and run tomcat from the command line as that user.

  • HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc.

    I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc..  It shows the backup as a file and shows various system info.  but there are no photos or other files shown.
    Thanks for any advise.
    Mike

    A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data.  Also ExFat formatting is not supported by 10.6.3 or earlier.  I would try viewing the backup on another Intel Mac with at least 10.6.4.  If it isn't there, then the backup never really took place.  I much profer a hard drive with Carbon Copy Cloner.

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • Perform action when Tomcat start and stop

    Hi. I'd read a thread about performing an action when Tomcat starts with configuring the web.xml file. I just wonder whether it's probable or not to perform an action when the Tomcat is stop. I mean like when the Tomcat is called to stop it'll run a class or call a servlet first before it's finally shut down. Is it possible to do that???
    Thanx!

    It should by possible with a Listener. You can see the use within the server.xml with the ServletLifecycleListener.
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    Look into the LifecycleListener Interface from the source and the implementations. I see some samples with mBeans using this interface.
    Examples:
    http://rollerweblogger.org/page/roller/20040625
    I 'have never try it out, but it should work like described!
    regards Dietmar

  • I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

    I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

    YOu have purchased or been sold an upgrade from Acrobat 9 or 10. You simply need to prove you own that old version using its serial number. be sure to keep both serials forever.

  • Creative cloud installed on the desktop, but when I start the window is white and does not work

    can someone help me?

    Thank god be with
    2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
        Creative cloud installed on the desktop, but when I start the window
    is white and does not work  created by Sheena Kaul
    <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
    the full discussion <https://forums.adobe.com/message/6672088#6672088>

  • Firefox 4 on Windows 7, Tools- Options- General- Startup- When FireFox Starts: Show my windows & Tabs from last time .. but on startup permanently shows only Firefox Default Home page

    Settings (Firefox 4 on Windows 7), Tools->Options->General->Startup->When FireFox Starts: Show my windows & Tabs from last time ..
    On startup permanently shows only Firefox Default Home page

    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.
    See also:
    * http://kb.mozillazine.org/Session_Restore

  • I had downloaded Aroura n thunderbird 14,but today when I started my lappy windows wasnt starting after diagonsis both softwares have gone!

    I m using these software on my laptop:windows 7 home basic,tuneup utilities 2012,AVG internet security 2012(trial version)
    and McAfee antivirus preloaded on this computer.
    Hardware details:500GB HDD,4GB RAM,intel i5 3rd gen processor and AMD Radeon graphics cardMy computer is hardly 1 month old
    When I started my lappy,windows wasnt starting;actually lappy was hanged on windows logo so I took off the batteries and reinstalled them.Then I started it again but DOS screen showed me the error message and asked me for windows diagnosis which further asked me to restore PC.Diagnosis was successful and this time windows started but I had lost thunderbirds and aroura applications.Is there any way to get thm back without internet download?
    Should I re-download those software?If I re download them,is it possible to happen again?How can I prevent this startup problem?

    System restore will revert changes made to the "Program Files" folders, so in your case it removed Aurora and Thunderbird. You will need to download and install them again. Hopefully whatever problem you had with Windows was fixed so it should not happen again.

  • When firefox starts show my windows and tabs from last time is greyed out

    firefox 4.0 startup. when I go to general under options when firefox starts show my windows and tabs from last time it is grayed out and I can't select it.

    Yes, that can happen if you run Firefox in [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"

  • Exchange 2013 EAC Service Pack 1 New mailbox cannot see all OUs when selecting Browse with "Exchange Organization Management " permissions

    Single forest 2 Domains. When I go to create a new mailbox in the Exchange Admin  Centre and "Browse" the Organizational Unit. I can only see a few OU in the Parent Domain and most in the Child Domain. I have tried "expand All" and
    cannot see anywhere in the EAC to set a "Recipient Scope". The account I am using has "Exchange Organization Management " rights and is a Domain Admin as well.
    The Exchange servers are members of the Root Domain.
    In the "Select an Organizational Unit" menu there is a message "There are more results available than are currently displayed". I have tried searching as well and cannot find OUs that I should be able to.
    All the servers have had Exchange 2013 Service pack 1 installed.
    Any suggestions?
    Regards,
    John

    Changing that setting resulted in the ECP site being inaccessible. So I changed it back
    I have copied the user accounts to test with.
    Originals:
    User1: can see OU's when making a new user through the ECP (access: domain, exchange recipient admin)
    User2: cannot. (Enterprise, domain, exchange, schema admin)
    Test users:
    test user1: copied from user 1, cannot see any OU's when creating a new user.
    test user2: copied from user 2, can see all OU's when creating a new user.

  • BBM version 6.1.0.49 - my bbm contacts cant see my Dp when i change it (Bold 9900 )

    Hello,
    I just bought my blackberry a few days go and I can’t see the display image of BBM contacts and they also cant see mine.
     The only time I could see their display image is when they change it.
     I tried changing my and they still can’t see it.
     I have tried the following
    1.       Updated OS to version 7.0.0 bundle 2406
    2.       Updated BBM to v6.1.0.49
    3.       Registered by BBM via the HRT
    Go to Options
    Select the Advance Options
    Select Host Routing Table
    Choose the “BOLD” point
    Press your BB menu
    Select Register Now
    Then it would be showing some message, “Your Handheld registered with the wireless network..”
    Restart your BlackBerry devices.
     4.       Rebooted & Restarted after each update
    5.       Removed the battery and restarted
    6.  Used Desktop manager to delete and reinstall BBM
    7. Downgraded BBM version from 6.1.0.49 to 6.0.032 to 6.0.0.25
    8. Downgraded OS system from Version 7 latest to the version 7 before it
    9. Deleted and reinstalled app world
    10. in fact i have done everything i can possibly think of and still have the same problem and result
    At first I thought this would be ok after adding several BBM contacts, but I have added up to 10 contacts today and still cant see their display image and they too cant see mine.
     I would really appreciate assistance on this.
     Kind regards
    Olu
     BB PIN: 28E6846A
    Location: United Kingdom
    Network provider: Orange

    i also have the same problem with my bold 9900, my contacts can't see my display picture. anyone with an idea of what to do? help desperately needed.
    tal.

  • I stuffed around with itunes and now I cant see my device when I connect...Please help??

    Please help I am a total spaz with itunes! lol I can't see my device in itunes..

    Hello there chester,
    It sounds like your iPhone is no longer recognized in iTunes when you plug it in. I recommend the steps from the following article to help troubleshoot what you are seeing:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    This is an overview of the troubleshooting to be done:
    1. Update iTunes
    2. Check the USB cable
    3. Verify that Apple Mobile Device Support is installed
    4. Restart the Apple Mobile Device Service
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Check for third-party software conflicts
    If the issue persists, I would next try uninstalling iTunes and all its associated softwares with either of the following articles depending on your version of Windows. Note: this will not affect your iTunes Library.
    Removing and Reinstalling iTunes and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    or
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Why cant I see any pictures when I start iPhoto?

    I just imported a new set of photos from my iPhone.  When I start iPhoto, I see a spinning disc saying "Loading Photos...", then I see my most recent imported set appear very briefly, then they disappear. 
    Then I just see an empty iPhoto window, with empty Text Boxes at the very bottom saying Event Name and Description.
    At the very bottom of the window it says "No Photos".
    I do have at least 2 dozen Events on the computer.
    Any idea what is happening?
    Thanks.

    Check, if your search filter is cleared: if there is anything in the search field, delete it. A search entry may hide all photos.
    If that is not the problem, you may need to repair or rebuild your iPhoto library:
    See: iPhoto 6 and later: Rebuilding the iPhoto library
    Make a backup of the iPhoto library before you rebuild.
    Regards
    Léonie

  • HT1386 i cant see my iphone when i connect with itunes

    iam unable to see my iphone when I plug to itunes. can someone help.

    Hey dos_1980,
    Thanks for the question. If you see an image that looks similar to the one included below, your iPhone is in recovery mode and needs to be restored with iTunes. For more information, check out the following resource:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht1808
    Thanks,
    Matt M.

Maybe you are looking for