New install does not allow write to repository
We are going from the evaluation copy to our licensed test environment. We have Microsoft Server 2008 R2, WebLogic and SQL as our environment.
Everything looks like it should however I cannot deploy, undeploy or create a new application from Work bench. I have tried the solution offered in FAQs for Workbench for the RepositoryProviderService, that did not resolve my problem. The error received when trying to create a new application was "Failed to create application, Please check if application ......" It seems that I can work in workbench up to the point of deployment. then I get a cannot serialize module for existing applications. I would delete the application and start from scratch but I am not sure how to do that either. Any suggestions?
Correction I can delete the local copy I can check in and check out assets however I cannot undeploy my application it says it is not serializable.
Similar Messages
-
In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter -
[SOLVED] New install does not see SSD drive
Ok, I have a DFI motherboard which at first did not recognize my new Intel SSD drive I have installed. After updating the BIOS, it now correctly recognizes it. However when I run the 2009.2 cd and try to prepare the drives, it does not show any drives listed?
/sbin/fdisk -l
does not show any drives either so it looks like arch cant see any installed HD's which makes since, but the motherboard does show the new Intel SSD as a Sata drive right under my DVD player?
Any help?
Edit: I hooked up my old Seagate drive and it shows up fine. Any idea on why this SSD is not playing nice?
Solved: I have come to the conclusion this has nothing to do with the Arch install, but is simply a hardware issue with my motherboard. I installed the SSD drive in my wifes pc, it seen the ssd as a sata drive while booting, it seen it when arch was initializing, it seen it when I did a fdisk, and when i finally tried to install, it was there too!!
So there must be some issue with my old DFI MB. I will work on that or upgrade..Thanks to everyone who helped out...
Last edited by banshee28 (2009-02-28 16:48:07)lilsirecho wrote:
I had trouble with my throttle device not making contact with the data lines when connected to USB.
I assume the SSD has the same connector as the motherboard and the cable can be reversed end to end to test for performance.
I use a multimeter to verify the presence of power to the device.
Sata cables are known to be flaky.
Throttle devices use 5vdc power from USB connector and are connected to esata cables at the same time since sata ports do not supply power. The connections for throttle are on opposite ends of the device.
I am not familiar with the SSD power setup but assume it is 5vdc as well.
No other suggestions here..................
Yes, the cable should be able to be reversed as the ssd drives are identical compared to normal sata drives in respect to the cable connections: one sata data connection and one power. I will try some different cables and see if that helps. I did try a new port on the mb which did not work, and when i used the current cables on my older seagate drive it worked fine
Last edited by banshee28 (2009-02-26 13:15:52) -
New ITUNES Does not allow me to sync and wiped out song on my ipod video
I was prompted to update my ITUNES software (7.02 I believe). Once I did this, it told me that I needed to update my Quick Time Software, which I also did.
I did as I was told and took my IPOD Video out on my walk. It deleted every song on my out except for two. When I attempeted to re synch the IPOD it will not allow me to do it.
The playlists on the IPOD appear to be locked.
HELP PLEASEI am having the same problem. My library is not showing up on my computer but is on my phone. The only thing on my computer is the 3 songs I just bought. My message says that my Iphone is synced with another library. I do not want to lose the 100+ songs on my iphone. I do not see them anywhere on my Mac computer. Should I sync or will I lose all music?
-
I have xp and have always been able to use bookmarks. The new Firefox allows me to go to a site with bookmarks, delete bookmarks, but I cannot add a bookmark by clicking on the star.
Also, Ebay's pages have smaller print (and pictures) than they should have - Google has the correct print and picture size. There is something wrong with Firefox.Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
You may have zoomed the page(s) by accident.<br>Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
The new update does not allow me to start a new tab in the browser
After updating Firefox for Mac, Command-T, the prompt in the File menu, nor the + by the open tab will start a new tab.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
after i downloaded firefox 4.o.1 i have no longer been able to use my VPN which i need frequently for work. it worked fine with the previous version of firefox.
Can you describe in a little more detail which part isn't working? For example, is the VPN not starting up when you start Firefox, or is Firefox not able to use the VPN tunnel?
If we can't solve it, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself! -
?
The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
Jerry -
I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don't manage to speak English on phone, bad hearing, to fast spoken, odd expressions.What can I do? Is there a possibility to write a complain?
You can use online chat to talk with Adobe. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.
-
How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?
The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
HT1338 I am trying to upgrade my macbook in installing a compatble itunes but it does not allow me
Friends i am trying to upgrade my Macbook by installing the new itunes 10.5 but it does not allow me to do so
What version of OS X is the MacBook running? It needs to be minimum Snow Leopard 10.6
-
I have a desktop computer- MAC. When I am looking for information or pulling up games for my grandkids, it will say I need to download the latest version of dobe Flash Player to view. I have downloaded this numerous times yet it still does not allow me to view. What am I doing wrong?
Could be the OS X version is too old for the later recommended Flash player version.
So this is where knowing what your computer really is, and the exact OS X version running in it. There is a hardware limit to upgrading the OS X in a PowerPC Mac with a ceiling of OS X 10.5.8 at the latest. This also limits the upgrade to a later version Adobe Flash player.
If the computer is not an older PPC-based Mac, and instead has an Intel core-duo or core2duo, an upgrade to OS X 10.6.8 is possible through purchase of the retail Snow Leopard 10.6 DVD and after installation, run Software Update to get the 10.6.8 Combo update v1.1 for Snow Leopard. This will not work on a PowerPC based Mac.
Should the computer be able to run a later OS X, a newer Player could be installed.
If the ceiling as suggested above be the case, and the workaround possible.
The question posed by Klaus is a minimal request for basic info.
Good luck
edited -
Forgot name/password and install disc does not allow me to reset it
I forgot the Name and Password I set up to log into my imac. It is an older imac, from 2006 and I can't remember which version operating system. I have tried to use the install disc to reset the password, but it does not allow me to do so. Is there a way to reset the name and password without the install disc? For as long as I can remember whenever I would turn on my mac there would be an image that I had chosen and then a field to enter password. Just recently I turned on my mac and the image or avatar was no longer coming up and it asked for Name and Password. I have tried every combination I can think of and nothing works. I have tried to reset using my install disc, but it says that I do not have a password to reset.
Before giving up try the following technique to determine the user account names, and reset their passwords if necessary.
1. Shut down your Mac and turn it back on while holding down the ⌘ and S keys at the same time until your see a black screen with white text. This is known as Single User mode.
2. You can skip the following step, but it is recommended that you do not because it will check your boot volume for errors and correct what it can:
At the :/ root# prompt, type fsck -fy and press Return or Enter. It will take a few moments to complete. If you are concerned that nothing is happening just press the Return key until you see the :/ root# prompt again. Once the file system check is complete and the prompt returns, type mount -uw / and press Return / Enter.
3. Type the following
launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist
and press Enter. If you get an error message you may ignore it.
4. Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are. You can skip the next step if you found the user name you recall and know its password.
5. Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing Password with the new password of your choice. Press Enter. You may get an error message about a file or directory not being found. You may ignore this.
6. Type reboot and press Enter.
Maybe you are looking for
-
Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.
-
Trying to manipute the photo page in iweb for a single slide show
I want to add a slide show to my website that I am creating but I do not want all the photos shown individually the way they do on the photo page for all the iweb templates. Can I import a slideshow from iphoto or do I need to create one somewhere el
-
The display attached to my new Mac Pro is Samsung SyncMaster 225BW which I originaly attached to the Mac with provided Vga adapter. Since the monitor also is DVI capable, I bought DVI connector am now digital to ATI Radeon HD 2600 XT via Leopard and
-
I can't upload photo's from my Canon 100D saying due to operating system
It will not allow me to update my canon software and I can't put my pictures onto my MAC which I need for uni!
-
Spry- pagation back to same place on reload?
I am playing around with page that is populated by a mysql database going into a Spy master detail page. I have also added pagation to it. I would like to be able to come back to the same pagation page, on reload. I that possible? I am using the Sp