New install of Horizon 6.1. It's normal that provisioning linked-clones will take a long time ?

Hi,
First, I will describe my installation :
1 Management Server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) and 256 Gb RAM
2 VDI Hosts server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) + 1 SSD 200 GB, 256 Gb RAM, 2 grid K1 cards
1 LUN on an Dell Equallogic PS6110X (750 GB) where I put the masters.
1 switch Dell N4032F (10 Gb)
All server will have 4 ports 10Gb configured with NPAR (so, i have 6 x 10 Gb virtual nic for the storage and 6 virtual nic for the VM network) and 2 ports 1 Gb for the management.
My master : Windows 7 SP1 x86 optimized with 24 Go HDD Thin-Provisionned (2 vCPU, 2 Go RAM, VMXNET 3 network cards). There is none added application on this master.
I can't apply the Microsoft patch for VMXNET 3 because it says that this patch is not applicable.
I don't have VSAN because only 2 VDI hosts, so I configure my pool for each hosts with local storage for the linked clones and local SSD for the replica.
When I run the provisionning of the desktop pool (17 VM):
The clone of the replica (Equallogic ==> local SSD) will take 2'30".... That's good for me (113 MB/s... the Equallogic is also used for another server storage on other LUN)
But the rest of all operation to finish the provisionning will take 40'.
More than 50% of cores will mount to 100% CPU on the host.
I have tried to change my RAID5 (9 hard disk + 1 spare) to RAID10 (10 HDD). It take 50'.
And, when all operations are finished... I have 2 or 3 VM with the message : Agent Unreachable and 1 or 2 hangs on Provisionning.
A recompose a one VM Desktop will take approximatively 1'30.
My question : it's normal that the provisioning will take so much time ?
And other question : when i'm connected to a VM Desktop with Horizon client during a pool provisioning, the VM freeze or i simply can't connect. Even if i have ready desktop. And sometimes, vCenter client will freeze to a lot of seconds during provisioning
Have someone idea ?
PS : Sorry for my approximate English ;-)

Today, i have try to put the RAID in RAID 0.
Result : always 50 minutes for provisioning.
So, the problem is not the RAID...
In vRealize Operation Manager, I see that i have latency in disk command and disk operation (up to 7000 ms !!!!).
And in vCenter performance (all type of performance), I have a lot of blank graphics during 5 to 20 seconds in different steps.
I don't know where were looking my problem...
Any idea ?

Similar Messages

Installed v 3.6.24 - Mac G5, OS 10.5.8- even Google takes ENORMOUS long time: 3-5 mins. I restarted. No difference. Do I need to back-install an earlier version of Firefox, that was working great? No problem BTW with my net connectivity.

My question is the details.

If you try tenfourfox read this too:
http://tenfourfox.blogspot.com/
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
thank you

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

Take very long time in phase DEPLOY_ONLINE_DEPL when install EHP1

Dear all, 
I need help for anyone that read my thread. I get trouble when install SAP EHP1 for SAP NetWeaver 7.1 at our client server, in phase DEPLOY_ONLINE_DEPL(Downtime Step). The phase take very long time. It has been more than 5 hours, but there is no progress. Now, the ABAP Stack has been in MAIN_NEWBAS/GETSYNC_MODPROF_STARTED, to wait process from JAVA stack. I have check the log file drive :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log: 
<!LOGHEADERSTART/> 
<!HELPManual modification of the header may cause parsing problem!/> 
<!LOGGINGVERSIONhttp://2.0.7.1006/> 
<!NAMEE:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_23_15_59_39\deploy_2010-08-23_15-59-53.log/> 
<!PATTERNhttp://deploy_2010-08-23_15-59-53.log/> 
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%25d%6s]:%m)/> 
<!ENCODINGUTF8/> 
<!LOGHEADEREND/> 
Aug 23, 2010 3:59:53 PM Info :DC API is trying to connect to ':50004' 
The content of log file not change after more than 5 hours, still like that. Is it normal ? Or any something miss ? 
My dead line will come tommorrow, please help me
Regards

And this the content of log file at drive:\usr\sap\DXI\EHPI\java\log: 
Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been started. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter action=deploySlot Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter connect=standard Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter errorStrategy=skipDepending Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter rule=all Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:558) [Thread[main,5,main]]: Checking phase parameters action, connect. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:570) [Thread[main,5,main]]: Phase parameters have been checked. All required 1 phase parameters have been set. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:152) [Thread[main,5,main]]: Trying to connect JSPM. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:161) [Thread[main,5,main]]: JSPM is not connected, trying to start it. Aug 23, 2010 3:59:38 PM [Info]: com.sap.sdt.util.proc.Process.start(Process.java:164) [Thread[main,5,main]]: E:\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp e:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm -boot=win -port=6250 -properties=jspm-srv_config.txt -startJSPM Aug 23, 2010 3:59:39 PM [Info]: java.lang.Thread.dumpThreads(Thread.java:-2) [Thread[ProcessReader,5,main]]: >> Current log directory is E:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_23_15_59_39. Aug 23, 2010 3:59:40 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.finished(AbstractToolConnector.java:373) [Thread[Process(E:\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp e:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm),5,main]]: JSPM terminated with exit code 0. Aug 23, 2010 3:59:41 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.connect(AbstractToolConnector.java:721) [Thread[main,5,main]]: Connected to host jktbtrsapx1 on port 6250. Aug 23, 2010 3:59:53 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:164) [Thread[main,5,main]]: JSPM was started successfully. Aug 23, 2010 3:59:53 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:207) [Thread[main,5,main]]: Trying to log in with user SAP*. 
Please help me

HT1444 If i download the new OS X Mountain Lion to my Macbook Pro that has Snow Leopard, will i lose my apps and downloads (such as: Microsoft word, powerpoint, excel, oovoo, skype) and will i lose all of my pictures/documents and information?

If i download the new OS X Mountain Lion to my Macbook Pro that has Snow Leopard, will i lose my apps and downloads (such as: Microsoft word, powerpoint, excel, oovoo, skype) and will i lose all of my pictures/documents and information?

I should just change the OS and leave all your apps and data alone. That said, if any of your apps are old and use Rosetta (ppc apps), they won't run under Mountain Lion.
Make sure you take a good Time Machine or Clone backup before you convert.
You can check compatibility of your apps here:
http://roaringapps.com/apps:table

HT4972 I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?

I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?

The ipod is not a backup device. The music sync is one way - computer to ipod. the exception is itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your old computer, or your backup copy of your old comptuer, to your new one.

Installing 10.4.8 on MacBook takes a long time, 1.5 hours formatted...

Apple gave me my PowerBook G4 12" when I was working there and it took less than 30 minutes to format and install and the new one I just bought takes 1.5 hours. All my certified Mac friends still at Apple say I should get a new install DVD set. I may be calling but any other ideas? Tech Tool that came with my Apple Care says everything is fine, but something is a miss.
Thank you.

Oh, ya, it was a quick format....took a long time formatting, trust me I know about zero'ing the data. The quick format took like 10 minutes, a full install on the formatted drive took about 70 min, 1.5 hours total. I was amazed, but thought if it works, it is worth it. No go. Called Apple on my lunch break and in 5 business days they will send out new install DVD's. I'll cross my fingers. So far I have used Apple's HW Test CD like the Apple loyalist that I am, then DiskWarrior, then techtool, all give it a clean bill of health. I'm very literate on Mac's and love them so, but I have a ton of application launch failures, which is why I formatted it, no change when it was a clean install (quick format) and if the HW is fine as I trust it with 3 tools telling me the same thing, it has to be my build of the OS. Theing is, this is the MacBook Intel Core 2 Duo, and my OS build is not on Apples spec page showing the possible builds that come with the OS. I find this strange. Guess I'll back up and format when I get the DVD's and cross my fingers. First I will try the archive and install and hope it works and pray it is the correct build that Apples web page shows, but any different build I think will do the trick, unless the DVD's are just jank.
ThanX all, message me in a week and I'll tell you if interested.
Kevin
http://www.theTechShack.com

Prelude takes a long time to open a (new) project file

Hi,
I'm trying out Prelude, and I've created a new project and ingested (via link) about 20 hours of Canon XF footage in about 1000 files from an internal hard drive. All the media loaded correctly and all the audio peak files were generated.
When I close and reopen Prelude and try to open that project, the "loading project" window pops up, the progress bar proceeds to completion over a few seconds, and the window goes away. The issue is that Prelude is then unresponsive for the next ten or fifteen minutes! I can see the entire interface, but nothing responds. I can see the clips listed, but their thumbnails are not loaded. Windows System Monitor tells me Prelude is actively using CPU and accessing the disk. After 10-15 minutes, the thumbnails appear and I'm able to use Prelude, but this seems like a LONG time to load a not-so-big project on a pretty new system. Is this normal?
My system has one of the new i7-4770k processors, 16 GB of RAM, a Samsung 840 SSD for the system drive, and an internal Seagate 3TB 7200 RPM drive as the media drive for this project, so I would expect loading to be pretty snappy. While Prelude is unresponsive, system monitor shows it using 15-20% CPU, 11 GB of RAM, and only 5-10 MB/s disk access. I've tried recreating the project file from scratch several times, with the same result every time.
Is this wait time normal? Is there any way I can speed it up?
If it's still loading, it seems like it should provide some feedback about that, too.

Hi Michael,
I tested out Prelude with approximately half of the same footage of my
larger project. It still had a brief unresponsive period but,
interestingly, the relationship to the amount of footage didn't seem to be
linear. Whereas a project with all the footage takes 10 minutes, this one
only took about a minute.
I should also point out that, although this is all Canon XF footage and all
the media is in numbered subdirectories with metadata like on the card,
they are not contained within the "CLIPS001" directory that your Canon XF
importer uses to identify XF media. Therefore, when I import them, the
import dialog doesn't identify the media directories as such. I don't know
whether that makes a difference, just wanted to try to help narrow it down
in any way I can.
Hope that helps. Will you update me when you have something?
Thanks.

New MackBook Pro and now I got an iPad 2. I had an iTunes acc opened on another Mac that had not used it in a long time. Now I need to get APPS but not permitted on this Mac (authorization to write on iTunes Media ?)

Need assitance to obtain permission to download APPS for my iPad through my MacBook Pro that for some reason iTunes is not allowing to do, I get message like "this computer doesn't have authorization to write on ITunes Media.
I have had the iTunes account for a long time but hardly used, never on this computer (new).

If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

Should configuation on new ipad2 out of box take a long time?

Just purchased Ipad 2 It's in configuration now - and has been for over an hour. It started at 80% and is now 77%. The screen goes black and when I press the home button, I slide the bar to continue configuration. My question is: Should this take so long and is it working even when the screen is dark? Thank you.

It should take no more than 15 minutes. Where did you get stuck?
Setup iPad 2 Step by Step
1. Turn on iPad
2. Set Language
3. Set Country
4. Enable Location Service
5. Setup WiFi
6. Setup as new
7. Sign-in with Apple ID
8. Agree with Apple Terms and Conditions
9. Enable iCloud
10. Enable Find My iPad
11. Register iPad
12. Start using iPad

T410i : sysprep /generalize take too long time. Works fine w/o video driver installed

I use to follow the same framework to build a WIM image file for years now. (T60, X61, T400, X201, all work fine)
Windows 7 32bit Enterprise Edition.
Now I got a new T410i and want to build the corporate image on it.
After installing all apps, I use to run a sysprep /audit /generalize /shutdown /unattend:My_capture.xml.
Usually, sysprep runs for a couple of minutes and gracefully shutdown the computer. Ready for capture with winPE.
With the T410, the sysprep phase turn the screen to black after a few minutes. The laptop show disk activity, and the display stays black for hours. If I power off, the resulting image is corrupted. Panther\Setupact.log shows the computer was busy enumerating PnP drivers while I press the power off.
After a few trial-on error, I found a workaround.
In the preparation of the the master image, I run Thinkvantage System Update to install all relevant applets and drivers.
I run the System Update in 3 phases :
- first the power manager and power drivers (otherwise I get an error on the Visual C++ redistributable), then reboot
- second the rest of important drivers and applets EXCEPT THE DISPLAY ADAPTER, the reboot
- third Access Connection, reboot.
The real workaround is to skip the installation of the display adapter driver NVDIA NVS 3100M Optimus] 8.17.12.5738/8.15.10.2202
By the way, there are other annoyance :
- sysprep process prompts to disable the Lenovo Toolbox from the task bar
- sysprep process wants to uninstall the modem applets and drivers (I cancel the two options)
Are there other persons facing this kind of behavior ?
Stefan

I had the exact same symptoms running sysprep on a T410. Searched and came accross this post with the fix.
http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/1b4783d1-6e10-4122-a246-7b480...

I am trying to install a language disc. I clicked on the installer. It ran for a long time without installing. I click stop installing and it says it is stopping but is doing nothing. I am unable to eject the disc or stop anything.

I am trying to install a Portugese language disc. I clicked on the installer icon and it said it was installing, but it ran forever without doing anything. I clicked "stop installing" and it says "stopping", but it is doing nothing. I am unable to eject the disc or do anything because it says an operation is in progress.

Please provide some info on the disc, where it comes from, who made it, etc. Also tell us what version of OS X you are running.

Reports Take A Long Time to Open on New Server

We have a number of crystal reports. Many have sub reports. Some have a lot of sub reports.
Earlier this year we swapped out a file server. ADAPCOFP went away and was replaced by ADAPCOFP1. ADAPCOFP has been turned off for over a month now.
The reports run, but when you go to initially open up the file it takes forever to open. The reports run fast once they are open, but take forever to open them. One report, that we run daily, takes 3 minutes to open. I turned the ADAPCOFP file server back on and this same file takes 5 seconds to open.
I did some google searches and see that others have had this same problem and seem to indicate that they found UNC references to a now non-existent server, removing the references fixed the problem. We have looked and relooked and looked some more and canu2019t find any UNC references anywhere in the report. There has to be something there because the state of ADAPCOFP seems to be the key to how quickly the report opens up.
Where should I look for UNC references. We have Crystal that was delivered with Dynamics GP and 99% of our reporting is from GP.
Thanks !

Hello,
The issue is the reports are still looking for the original server because that server name is saved in the report file. You'll have to open each report up and do a Set Location to the new report. You'll need the same version of the REport Designer the reports were created in.
I suggest to call Dynamics and ask them how to update the reports.
Thank you
Don

New install of Horizon 6.1. It's normal that provisioning linked-clones will take a long time ?

Similar Messages

Maybe you are looking for